STAT3 Program Supply. API and finished Product sufficient to support the [***] that will be conducted by AstraZeneca under the STAT3 Research and Development Plan;
STAT3 Program Supply Sample Clauses
Related to STAT3 Program Supply
Program Services a) Personalized Care Practice agrees to provide to Program Member certain enhancements and amenities to professional medical services to be rendered by Personalized Care Practice to Program Member, as further described in Schedule 1 to these Terms. Upon prior written notice to Program Member, Personalized Care Practice may add or modify the Program Services set forth in Schedule 1, as reasonably necessary, and subject to such additional fees and/or terms and conditions as may be reasonably necessary. b) Program Member acknowledges that the Program Services are services that are not covered services under any insurance contract to which Program Member may be a party, including, without limitation, Medicare, and are not reimbursable by Program Member’s insurer, health plan or any governmental entity, including Medicare. Program Member agrees to bear sole financial responsibility for the Member Amenities Fee and agrees not to submit to Program Member’s insurer, health plan or governmental entity any xxxx, invoice or claim for payment or reimbursement of such Member Amenities Fee. c) Personalized Care Practice or its designated affiliate will separately charge Program Member or Program Member’s insurer, health plan or governmental entity for medical, clinical, diagnostic or therapeutic services rendered by Personalized Care Practice or its designated affiliate to Program Member, and Program Member may seek payment or reimbursement from Program Member’s insurer or health plan for any such service to the extent covered by Program Member’s insurer, health plan or governmental entity. d) Program Member understands, agrees and covenants that this Agreement is a service contract, and not a contract for insurance.
Commercial Supply After the Option Termination Date: (a) if requested by Kolltan, the Parties shall undertake good faith negotiations regarding a commercial supply agreement pursuant to which MedImmune would supply to Kolltan, and Kolltan would purchase from MedImmune, quantities of the Licensed Antibody or Licensed Product, in any of its forms, for use by Kolltan, for commercial sale (“Commercial Supply Agreement”); and (b) if (i) for any reason the Parties have not entered into the Commercial Supply Agreement (including if Kolltan has not requested that the Parties undertake negotiations with respect to thereto pursuant to Section 3.6.4(a)) or (ii) the Commercial Supply Agreement is entered into by the Parties but expires or is terminated for any reason other than breach by Kolltan, without limitation of any other rights that may be available to Kolltan, upon Kolltan’s written request and subject to MedImmune’s good faith consent as described below, MedImmune shall (x) transfer and/or disclose to Kolltan or any Qualified Contract Manufacturer designated in good faith by Kolltan such MedImmune Manufacturing Know-How and (y) provide to Kolltan or such Qualified Contract Manufacturer such technical assistance, in each case ((x) and (y)) as reasonably required for Kolltan or such Qualified Contract Manufacturer to Manufacture the Licensed Antibody and Licensed Products for use in Kolltan’s Commercialization activities hereunder. The foregoing sentence notwithstanding, except as set forth in Section 3.6.5 below, MedImmune has no obligation to disclose to Kolltan or any Qualified Contract Manufacturer the MedImmune Manufacturing Know How related to MedImmune proprietary cell culture media and nutrient feeds used in the Manufacturing process. Kolltan acknowledges and agrees that any transfer and/or disclosure by Kolltan of any MedImmune Manufacturing Know-How described in the immediately preceding sentence to a Third Party shall require the prior written consent of MedImmune; provided, however, that (A) MedImmune shall not unreasonably withhold such consent and (B) MedImmune’s determination as to whether to provide such consent shall be made in good faith. The transfers and disclosures described in clause (x) above shall be made (1) in any manner or form reasonably requested by Kolltan and (2) at MedImmune’s expense; provided, however, if at Kolltan’s request any such transfer or disclosure is made in any manner or form that is not reasonably standard in the biopharmaceutical industry for transfers or disclosures of a similar kind, such transfer or disclosure shall be made at Kolltan’s expense. The assistance described in clause (y) above shall be provided at MedImmune’s expense, provided, however, that the scope of such assistance will be limited to reasonable and customary assistance related to technology transfer under similar circumstances in the biologics industry.
Clinical Supply In connection with the Technology Transfer, Lexicon shall transfer to Sanofi any usable inventory of Licensed Compound or Licensed Product, subject to Lexicon’s retention of reasonable requirements of such Licensed Compound or Licensed Product for its T1DM Development activities no later than [**] (or such other date as is agreed by the Parties), and Lexicon’s Manufacturing Cost paid to Lexicon CMOs for such transferred quantities of inventory shall be treated as Development Costs and borne by the Parties in accordance with Section 7.6. Prior to the completion of the Technology Transfer in accordance with Section 6.2, Lexicon shall, to the extent requested by Sanofi and as mutually agreed by the Parties, supply clinical quantities of the Licensed Products and placebo for use by Sanofi in the Development of Licensed Products for T2DM in accordance with the Development Plan, and Lexicon’s Manufacturing Cost incurred in connection therewith shall be treated as Development Costs. After the Technology Transfer, Sanofi shall supply clinical quantities of the Licensed Products and placebo reasonably required by Lexicon for Lexicon’s use in the Development of Licensed Products for T1DM in accordance with the Development Plan and for its own use in the Development of Licensed Products. Lexicon shall Manufacture (or have Manufactured) all such Licensed Product in accordance with Applicable Law and the applicable specifications therefor, including, to the extent required by Applicable Law, cGMP; provided that Lexicon’s liability arising from a breach by the CMO of its agreement with Lexicon shall be limited to such recoveries as are obtained by Lexicon using Commercially Reasonable Efforts to obtain such recoveries and such other remedies as may be available to Lexicon for such breach under its agreement with such CMO. Otherwise, Sanofi’s sole and exclusive remedy and Lexicon’s sole and exclusive liability to Sanofi for any nonconformity shall be for Lexicon to replace such nonconforming Licensed Compound or Licensed Product with conforming Licensed Compound or Licensed Product within reasonable timelines to be mutually agreed by the Parties in writing, but nothing in this Section 6.1.1 shall limit Lexicon’s liability for Third Party Claims under ARTICLE 11. At either Party’s option, Lexicon and Sanofi shall enter into a clinical supply agreement and a reasonable and customary Quality Agreement that shall set forth the terms and conditions upon which Lexicon and any of its Affiliates will conduct their quality activities in connection with such supply, including (i) a right of Sanofi to audit Lexicon and the Lexicon CMOs, (ii) coordination regarding inspections by Regulatory Authorities and (iii) the exchange of information between the Parties regarding the foregoing and quality issues in general. Such agreements shall be negotiated and agreed by the Parties in good faith.
Product Supply 5.1 In the event that Eisai notifies Radius of its desire to purchase bulk substance of Compound from Radius, Radius shall supply Eisai with all amount of such bulk substance of Compound, which meets specifications for the Product determined by Radius in the course of its Development activities pursuant to this Agreement, required by Eisai for commercial sales of Product in Japan With respect to Eisai clinical development activities for Product in Japan, upon Eisai’s request, Radius shall supply Eisai the bulk substance of Compound for * Confidential Treatment Requested by the Registrant. Redacted Portion Filed Separately with the Commission. the conduct of the Eisai Development activities in the amounts and at the times determined by the SC, having reference to the quantity of the bulk substance of Compound required for clinical trials in Japan. Radius shall charge [*] for applicable bulk substance of Compound. Radius shall ship such bulk substance of Compound, FOB point of manufacturing. 5.2 In the event that Eisai notifies Radius of its desire to purchase Semi-Product from Radius which meets specifications determined by Radius in the course of its Development activities pursuant to this Agreement, Radius shall supply Eisai with all amount of Semi-Product required by Eisai for commercial sales of Product in Japan. With respect to Eisai clinical development activities for Product in Japan, upon Eisai’s request, Radius shall supply Eisai Semi-Product for the conduct of the Eisai Development activities in the amounts and at the times determined by the SC, having reference to the quantity of Semi-Product required for clinical trials in Japan. Radius shall charge [*] for Semi-Product. Radius shall ship such Semi-Product, FOB point of manufacturing. 5.3 The Parties agree that they shall, in good faith, discuss, negotiate and execute necessary agreements containing mutually acceptable terms, including but not limited to, a supply agreement for either bulk substance of Compound or Semi-Product as well as a quality control agreement of either bulk substance of Compound or Semi-Product, in the event that Eisai notifies Radius as set forth in Article 5.1 or 5.2. 5.4 As manufacturer of the Product, Radius shall be responsible for: (a) the control of the quality of the Product promoted and sold under the Radius trademarks; as provided in Article 2.3; and (b) ensuring that all bulk substance of Compound or Semi-Product supplied to Eisai pursuant to this Article 5 shall be manufactured in accordance with the applicable good manufacturing practices (GMP) and shall meet the then applicable specifications for the bulk substance of Compound or Semi-Product; and Radius warrants that all bulk substance of Compound or Semi-Product supplied to Eisai pursuant to this Article 5 shall be manufactured in accordance with the applicable GMP and * Confidential Treatment Requested by the Registrant. Redacted Portion Filed Separately with the Commission. shall meet the then applicable specifications for the bulk substance of Compound or Semi-Product and will be free from defects in material and workmanship. Radius shall resolve any product liability issues in the Territory relating to the Product and shall resolve any product liability issues in Japan relating to the Product or the bulk substance of Compound or Semi-Product, as the case may be, supplied to Eisai pursuant to this Article 5 in the event and to the extent related to a breach of the warranty set forth in Article 5.4(b) at its own expense and subject to Article 5.5. 5.5 Radius’ obligations with respect to product liability in the Territory and Japan shall include the following responsibilities, each to be taken at Radius’ expense: (a) Radius shall report, at its expense, to appropriate authorities, in accordance with local requirements, all adverse events related to use of the Product in the Territory or Japan. Eisai shall provide to Radius, upon Radius’ request, reasonable assistance in connection with the reporting of all of adverse events, responding to safety queries and assessing safety issues, in each case, to the extent related to the Product in Japan. Adverse events shall be recorded in a single, centralized database, which shall be held and owned by Radius. Radius will provide, upon request by Eisai, any safety information in Radius’ control and reasonably required by Eisai in connection with the development and commercialization of the Product in Japan and all reasonable assistance in responding to safety queries related to the Product and in assessing safety issues related to the Product in Japan. Details of safety reporting activities relating to the Product will be addressed in a pharmacovigilance contract, which the Parties shall enter into after the Effective Date. (b) In the event that (i) Radius determines that an event, incident, or circumstance may result in the need for a recall or other removal of the Product or any lot or lots thereof from the market; (ii) any regulatory authority in the Territory threatens to remove a Product from the market; or (iii) any regulatory authority in the Territory requires distribution of a “Dear Doctor” letter or its equivalent regarding the use of Product, Radius shall promptly advise Eisai in writing, and shall provide Eisai with copies of all relevant correspondence, notices and the like. Notwithstanding anything the contrary herein, Radius shall have final authority to make all decisions relating to any recall, market withdrawal or other corrective action with respect to the Product in the Territory. After establishing SC pursuant to Article 3.5, all decisions relating to any recall, market withdrawal or other corrective action with respect to the Product shall be decided by the SC as set forth in Article 3.6; provided that in the event that the Parties take different positions with respect to recall, market withdrawal or other corrective action with respect to the Product, then Radius shall have the right to cease supplying bulk substance of Compound or Semi-Product to Eisai for Japan if, after good faith discussions with Eisai, Radius reasonably believes that that continued supply to Eisai exposes Radius to liability as a result of its decision with respect to the Territory. If Radius elects to cease supply, it will terminate supply in an orderly manner, as soon as practical and in accordance with a schedule agreed to by Eisai and Radius. In the event of a recall, market withdrawal or other corrective action with respect to the Product in Japan, and at Radius’ request, Eisai shall provide reasonable assistance to Radius, at Radius’ cost and expense, in conducting any such recall, market withdrawal or other corrective action with respect to the Product in Japan. 5.6 THE WARRANTY IN SECTION 5.4(b) IS IN LIEU OF ANY OTHER WARRANTY WITH RESPECT TO THE PRODUCT, BULK SUBSTANCE OF COMPOUND OR SEMI-PRODUCT SUPPLIED BY RADIUS HEREUNDER, WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE).
Development Plans Shipper has provided Gatherer with a report attached hereto as Exhibit D (the “Current Development Plan”) describing in detail, as of January 1, 2017, the planned development, drilling, and production activities to take place with respect to Dedicated Production for the applicable Development Period. The information contained in the TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**). Current Development Plan is broken out on a Subsystem-by-Subsystem basis and, with respect to the first three Years covered by the Current Development Plan, on a Quarter-by-Quarter basis, and with respect to the remaining Years covered by the Current Development Plan, on a Year-by-Year basis. The Current Development Plan attached hereto has been approved by the Parties. (a) From time to time during each Year of the Term, the Parties shall meet to discuss the planned development, drilling, and production activities that Shipper expects to take place with respect to Dedicated Production for the then-applicable Development Period. Shipper and Gatherer shall each make their respective representatives available to participate in such meetings and discussions. No later than August 1 of each such Year, Shipper shall provide (or cause to be provided) to Gatherer a proposed update of the then-currently agreed Development Plan, prepared on the same basis as the Current Development Plan and describing in detail the planned development, drilling, and production activities to take place with respect to Dedicated Production for the then-applicable Development Period (any such update, an “Updated Development Plan” and, together with the Current Development Plan, each, a “Development Plan”). Notwithstanding anything herein to the contrary, in no event shall Gatherer be required to agree to any Updated Development Plan and corresponding updated Gathering System Plan that contains a Committed Build-Out that (i) has a corresponding Target Completion Date that occurs after the end of the Initial Term, and (ii) Gatherer, in its sole discretion, does not wish to approve. (b) Each proposed Development Plan shall include information as to the following, in each case, broken out on a Subsystem-by-Subsystem basis and, with respect to the first three Years covered by such Development Plan, on a Quarter-by-Quarter basis, and, with respect to the remaining Years covered by such Development Plan, on a Year-by-Year basis: (i) all Xxxxx that, as of the date such Development Plan was delivered, are currently in existence and (A) the production therefrom is being delivered into the Gathering System, or (B) are awaiting connection to the Gathering System; (ii) the Xxxxx that are expected to be drilled during the time period covered by such Development Plan (each such Well reflected in such Development Plan, a “Planned Well”), and the estimated timing of the drilling of such Planned Xxxxx; (iii) forward-looking production estimates for the applicable time period covered by such Development Plan for all Shipper Gas (A) that Shipper reasonably and in good faith believes will become owned or Controlled by Shipper during the time period covered by such Development Plan, and/or (B) that will be produced from (I) in the aggregate, all Xxxxx then-existing and (II) in the aggregate, any Planned Xxxxx included in such Development Plan (such collective estimates described in subsections (A) and (B), both with respect to a particular Quarter and an entire Year, the “Dedicated Production Estimates”); TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**). (iv) forward-looking estimates for the applicable time period covered by such Development Plan of the aggregate volumes of those Shipper Injected Liquids that Shipper intends to Tender to the Injection Points hereunder to receive the System Services (such estimates, both with respect to a particular Quarter and an entire Year, the “System Liquids Estimates” and, together with the Dedicated Production Estimates, the “System Production Estimates”); (v) (A) each new receipt point (including the location thereof) proposed by Shipper with respect to the System Production Estimate reflected in such Development Plan (each such receipt point, including those located at the site of a Planned Well, a “Planned Receipt Point”), (B) each Receipt Point at which Shipper expects to Tender Shipper Gas and/or Shipper Injected Liquids reflected in such Development Plan into the Gathering System, and (C) the estimated portion of the System Production Estimate contained in such Development Plan that Shipper expects to Tender at each such Receipt Point and Planned Receipt Point; (vi) the earliest date on which each Planned Well included in the Development Plan is estimated to be completed and producing, which date shall not be earlier than three Months after the January 1st that is immediately subsequent to the date that the Development Plan that initially reflected such Planned Well was delivered to Gatherer hereunder; (vii) the anticipated characteristics of the production from the Xxxxx and Planned Xxxxx reflected in such Development Plan (including liquids content and gas and liquids composition) and the projected production volumes and production pressures applicable thereto; provided that Shipper may utilize the existing and historical production information from similarly situated Xxxxx; (viii) (A) each new delivery point (including the location thereof) proposed by Shipper with respect to the System Production Estimate reflected in such Development Plan (each such delivery point, a “Planned Delivery Point”), (B) each Delivery Point at which Shipper expects Shipper Gas produced from the Xxxxx and Planned Xxxxx reflected in such Development Plan to be redelivered to Shipper, (C) each Delivery Point at which Shipper expects any Drip Liquids allocated to Shipper in accordance with this Agreement and/or Shipper Injected Liquids to be redelivered to Shipper, and (D) the estimated portion of the System Production Estimate contained in such Development Plan that Shipper expects to be redelivered to Shipper at each such Delivery Point and Planned Delivery Point; (ix) any (A) proposed revision to the then-existing Dedicated Area and/or any then-existing Dedicated Contract and/or (B) any new contract that Shipper proposes to be a Dedicated Contract; and (x) other information reasonably requested by Gatherer that is relevant to the design, construction, and operation of the Gathering System, including (A) any Subsystem Extension proposed by Shipper, (B) the relevant Receipt Point, Planned Receipt Point, Delivery Point and Planned Delivery Point facilities applicable to such TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH TWO ASTERISKS (**). Development Plan, and (C) any treating, processing, or liquids handling facilities proposed by Shipper that may be required for any Shipper Gas and/or Shipper Injected Liquids to meet applicable Downstream Facility specifications at the Delivery Points.
Development Program RWJPRI shall be [**] and have [**] in consultation with the JDAC, to select LICENSED COMPOUNDS which shall then be designated PRODUCTS for further DEVELOPMENT by RWJPRI and marketing by ORTHO and its AFFILIATES. RWJPRI shall provide KOSAN with written notice of its decision to select a LICENSED COMPOUND for DEVELOPMENT. Once a PRODUCT has been selected for further DEVELOPMENT, RWJPRI, with the advice of the JDAC, shall have the [**] right to develop the PRODUCT through STAGES O, I, II and III and shall have the [**] right to prepare and file, and shall be the owner of, all applications for MARKETING AUTHORIZATION throughout the world. During such DEVELOPMENT efforts, KOSAN will assist RWJPRI as may be mutually agreed, at RWJPRI's expense, in chemical development, formulation development, production of labeled material and production of sufficient quantities of material for STAGE O and initial STAGE I studies. RWJPRI shall exercise diligent efforts, commensurate with the efforts it would normally exercise for products with similar potential sales volume and consistent with its overall business strategy, in developing such PRODUCT in accordance with the DEVELOPMENT PLAN established by RWJPRI. In the course of such efforts RWJPRI shall, either directly or through an AFFILIATE or SUBLICENSEE to which the license shall have been extended, take appropriate steps including the following: (i) in consultation with the JDAC, select certain LICENSED COMPOUNDS for STAGE O DEVELOPMENT; and (ii) establish and maintain a program reasonably designed, funded and resourced to obtain information adequate to enable the preparation and filing with an appropriate and properly empowered national regulatory authority all necessary documentation, data and [**] CERTAIN INFORMATION IN THIS EXHIBIT HAS BEEN OMITTED AND FILED SEPARATELY WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT TO THE OMITTED PORTIONS. other evidence required for IND non-rejection to commence and conduct human clinical trials of such PRODUCT. (iii) proceed following IND non-rejection to commence PHASE I, II, and III clinical trials, associated studies and such other work which RWJPRI reasonably deems to be required for subsequent inclusion in filings for MARKETING AUTHORIZATION; (iv) after such submissions are filed prosecute such submissions and file all reasonably necessary, reports and respond to all reasonable requests from the pertinent regulatory, authorities for information, data, samples, tests and the like.
PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.
Additional Products and Services Subject to the allocation of funds, the CPO may add similar equipment, supplies, services, or locations, within the scope of this Agreement, to the list of equipment, supplies, services, or locations to be performed or provided by giving written notification to Contractor. For purposes of this Section, the “Effective Date” means the date specified in the notification from the CPO. As of the Effective Date, each item added is subject to this Agreement, as if it had originally been a part, but the charge for each item starts to accrue only on the Effective Date. In the event the additional equipment, supplies, services, or locations are not identical to the items(s) already under this Agreement, the charges therefor will then be Contractor’s normal and customary charges or rates for the equipment, supplies, services, or locations classified in the Fees and Costs (Exhibit “F”).
Development Activities The Development activities referred to in item “b” of paragraph 3.1 include: studies and projects of implementation of the Production facilities; drilling and completion of the Producing and injection xxxxx; and installation of equipment and vessels for extraction, collection, Treatment, storage, and transfer of Oil and Gas. The installation referred to in item “c” includes, but is not limited to, offshore platforms, pipelines, Oil and Gas Treatment plants, equipment and facilities for measurement of the inspected Production, wellhead equipment, production pipes, flow lines, tanks, and other facilities exclusively intended for extraction, as well as oil and gas pipelines for Production Outflow and their respective compressor and pumping stations.
Development Agreement As soon as reasonably practicable following the ISO’s selection of a transmission Generator Deactivation Solution, the ISO shall tender to the Developer that proposed the selected transmission Generator Deactivation Solution a draft Development Agreement, with draft appendices completed by the ISO to the extent practicable, for review and completion by the Developer. The draft Development Agreement shall be in the form of the ISO’s Commission-approved Development Agreement for its reliability planning process, which is in Appendix C in Section 31.7 of Attachment Y of the ISO OATT, as amended by the ISO to reflect the Generator Deactivation Process. The ISO and the Developer shall finalize the Development Agreement and appendices as soon as reasonably practicable after the ISO’s tendering of the draft Development Agreement. For purposes of finalizing the Development Agreement, the ISO and Developer shall develop the description and dates for the milestones necessary to develop and construct the selected project by the required in-service date identified in the Generator Deactivation Assessment, including the milestones for obtaining all necessary authorizations. Any milestone that requires action by a Connecting Transmission Owner or Affected System Operator identified pursuant to Attachment P of the ISO OATT to complete must be included as an Advisory Milestone, as that term is defined in the Development Agreement. If the ISO or the Developer determines that negotiations are at an impasse, the ISO may file the Development Agreement in unexecuted form with the Commission on its own, or following the Developer’s request in writing that the agreement be filed unexecuted. If the Development Agreement is executed by both parties, the ISO shall file the agreement with the Commission for its acceptance within ten (10) Business Days after the execution of the Development Agreement by both parties. If the Developer requests that the Development Agreement be filed unexecuted, the ISO shall file the agreement at the Commission within ten (10) Business Days of receipt of the request from the Developer. The ISO will draft, to the extent practicable, the portions of the Development Agreement and appendices that are in dispute and will provide an explanation to the Commission of any matters as to which the parties disagree. The Developer will provide in a separate filing any comments that it has on the unexecuted agreement, including any alternative positions it may have with respect to the disputed provisions. Upon the ISO’s and the Developer’s execution of the Development Agreement or the ISO’s filing of an unexecuted Development Agreement with the Commission, the ISO and the Developer shall perform their respective obligations in accordance with the terms of the Development Agreement that are not in dispute, subject to modification by the Commission. The Connecting Transmission Owner(s) and Affected System Operator(s) that are identified in Attachment P of the ISO OATT in connection with the selected transmission Generator Deactivation Solution shall act in good faith in timely performing their obligations that are required for the Developer to satisfy its obligations under the Development Agreement.
