Supply of Livestock Sample Clauses

Supply of Livestock. 6.1 Delivery- cattle must be at the specified meatworks the day before xxxxxxxxx and will be in line with the signed contract. 6.2 Curfews vary from plant to plant. Specific curfews apply for EU cattle arrivals at all plants, failure to meet these curfews without prior notice will result in the cattle being made ineligible for EU production. Specific details of plant curfews can be sourced from the vendor’s cattle buyer at the time of booking or Teys livestock office. All cattle weighed at feedlot may be subject to a percentage shrink dependant on the distance travelled (please see applicable feeder grid) and all cattle privately weighed are subject to percentage shrink (except on 12 hour curfew held in weighing area).
Sample 1
Supply of Livestock 
Sample 1Sample 2Sample 3See All (6)

Related to Supply of Livestock

  • Supply of Materials The following materials will be supplied by the department Name of Materials Rate. Place of delivery 1.

  • Supply of Goods 6.1 In consideration of UKRI’s agreement to pay the Charges, the Supplier shall supply all Goods in accordance with the Agreement and any Contract. In particular, the Supplier warrants that the Goods shall: (a) conform with their description in the specifications (including the Specification), drawings, descriptions given in quotations, estimates, brochures, sales, marketing and technical literature or material (in whatever format made available by the Supplier) supplied by, or on behalf of, the Supplier; (b) be of satisfactory quality (within the meaning of the Sale of Goods Act 1979) and fit for any purpose held out by the Supplier or made known to the Supplier by UKRI, expressly or by implication, and in this respect UKRI relies on the Supplier's skill and judgement. The Supplier acknowledges and agrees that the approval by UKRI shall not relieve the Supplier of any of its obligations under this sub-clause; (c) where applicable, be free from defects (manifest or latent), in materials and workmanship and remain so for 12 months after Delivery; (d) be free from design defects; (e) comply with all applicable statutory and regulatory requirements relating to the manufacture, labelling, packaging, storage, handling and delivery of the Goods; (f) be supplied in accordance with all applicable legislation in force from time to time; and (g) be destined for supply into, and fully compliant for use in, the United Kingdom (unless specifically stated otherwise in the Specification). 6.2 In supplying the Goods, the Supplier shall co-operate with UKRI in all matters relating to the supply of the Goods and comply with all of UKRI’s instructions. 6.3 The Supplier shall ensure that at all times it has and maintains all the licences, permissions, authorisations, consents and permits that it needs to carry out its obligations under the Agreement. 6.4 UKRI and its representatives shall have the right to inspect and test the Goods at any time before Delivery. 6.5 If following such inspection or testing UKRI considers that the Goods do not conform or are unlikely to comply with the Supplier's undertakings at clause 6.1, UKRI shall inform the Supplier and the Supplier shall immediately take such remedial action as is necessary to ensure compliance. 6.6 Notwithstanding any such inspection or testing, the Supplier shall remain fully responsible for the Goods and any such inspection or testing shall not reduce or otherwise affect the Supplier's obligations under this Agreement, and UKRI shall have the right to conduct further inspections and tests after the Supplier has carried out its remedial actions. 6.7 UKRI’s rights under the Agreement are without prejudice to and in addition to the statutory terms implied in favour of UKRI under the Sale of Goods Act 1979, the Supply of Goods and Services Act 1982 and any other applicable legislation as amended.

  • Supply of Products ‌‌ 3.1 The Supplier warrants that the Products shall: (a) correspond with their description and any applicable Product Specification; (b) conform in all respects with the Order and any relevant sample; (c) be of satisfactory quality and fit for any purpose held out by the Supplier or made known to the Supplier by Ornua, expressly or by implication, and in this respect Ornua relies on the Supplier's skill and judgement; (d) be manufactured by properly trained and qualified personnel using all reasonable skill, care and diligence and in a good and workmanlike manner;‌ (e) where they are manufactured products, be free from defects in design, materials and workmanship and remain so for the period set out in the Product Specification or, if none is specified, for at least 12 months after delivery; (f) comply with all applicable statutory and regulatory requirements relating to the manufacture, labelling, packaging, storage, handling and delivery of the Products;‌ (g) comply with all relevant standards including any UK Standards, European Standards or International Standards applicable in the UK and the country or State where the Products are to be used; and (h) in the case of Products containing food stuffs, when delivered to Ornua, comply with all applicable food and hygiene legislation and regulations and best industry practice.‌ 3.2 The Supplier shall ensure that at all times it has and maintains all licences, permissions, authorisations, consents and permits needed to carry out its obligations under the Contract in respect of the supply of Products. Breach of this Condition shall be deemed a material breach of the Contract. 3.3 Ornua may inspect and test the Products at any time before delivery. The Supplier shall remain fully responsible for the Products despite any such inspection or testing and any such inspection or testing shall not reduce or otherwise affect the Supplier's obligations under the Contract. 3.4 If following such inspection or testing Ornua considers that the Products do not comply or are unlikely to comply with the Supplier's undertakings at clause 3.1, Ornua shall inform the Supplier and the Supplier shall immediately take such remedial action as is necessary to ensure compliance.‌ 3.5 Ornua may conduct further inspections and tests after the Supplier has carried out its remedial actions.

  • SINGLE-USE PRODUCTS The Board of County Commissioners has established a single-use products and plastic bags policy intended to reduce the use of products which have become globally recognized as having lasting negative impacts on the environment. Neither single-use products nor plastic bags may be sold or disbursed on County property by staff or contracted vendors, except as set forth in Orange County Administrative Regulation 9.01.03. Failure to comply with the Regulation may result in termination of the contract or other contractual remedies, and may affect future contracting with the County. The use of reusable, recyclable, biodegradable, or compostable materials is encouraged.

  • Supply of Product Salix shall use reasonable efforts to supply the Product during the Co-Promotion Period in sufficient quantities to satisfy the levels of Product sales forecasted in the then current Marketing Plan. Salix shall maintain reasonable inventory levels of the Product in order to ensure their ability to fulfill this obligation. Salix shall have the sole responsibility and right to fill orders with respect to the Product. Altana shall not solicit orders for the Product but, if for any reason, Altana shall receive an order for the Product, Altana shall promptly forward to Salix any such orders. All orders for Product shall be subject to acceptance by Salix, in its sole discretion, which acceptance shall not be unreasonably withheld. Salix may cancel any order for Product at any time after acceptance without incurring any liability to Altana. Salix shall be solely responsible for responding to requests from Target Physicians for individual patients who need the Product but are unable to afford it. Any such request shall be forwarded by Altana to Salix for processing. Salix shall have the sole right and responsibility for establishing and modifying the terms and conditions of the sale of the Product, including (a) the price at which the Product will be sold, (b) whether the Product will be subject to trade or quantity discounts, (c) whether any discount will be provided for payments on accounts receivable, (d) whether the Product will be subject to rebates, returns and allowances or retroactive price reductions, (e) the channels of distribution of the Product, and (f) whether credit [*] Confidential treatment requested; certain information omitted and filed separately with the SEC. is to be granted or refused in connection with any sale of Product. In the event that Salix fails to supply the Product as required pursuant to this Agreement for any reason other than a Force Majeure, which such failure results in lost sales for Altana, the Parties shall meet and attempt to negotiate a mutually agreeable and commercially reasonable solution. If the Parties cannot reach such an agreement within a reasonable period of time, the issue will be dealt with as contemplated under Section 4.4 of this Agreement.

  • Supply Agreement During the period of two (2) years following the Trigger Date (the “Tail Period”), if a member of the Newco Group (the “Newco Purchaser”) reduces in any given six-month period (which period starts at any point of time after the Trigger Date) the GE Sourcing Costs Share with respect to any Seller Good that it purchases from a member of the GE Group (the “GE Supplier”) pursuant to the Supply Agreement by thirty percent (30%) as compared to the GE Sourcing Costs Share with respect to such Seller Good purchased from GE Supplier in the most recently completed calendar year prior to the Trigger Date, and the GE Supplier (a) has available capacity to supply such Seller Good pursuant to the Supply Agreement and (b) is not in material breach of the Supply Agreement (which such breach is incapable of being satisfied or cured by the GE Supplier within thirty (30) calendar days following receipt of written notice from the Newco Purchaser of such breach), then Section 1 shall no longer restrict the GE Supplier from selling such Seller Good during the remainder of the Tail Period. Upon reasonable request from the applicable GE Supplier, Newco shall, or shall cause the applicable Newco Purchaser to, provide to the applicable requesting GE Supplier, in reasonable detail, the GE Sourcing Costs Share with respect to applicable time periods. For purposes of this Section 4, “GE Sourcing Costs Share” means the quotient of (a) the amount of the sourcing costs incurred by the Newco Purchaser with respect to any Seller Good (as defined in the Supply Agreement) purchased by the Newco Purchaser from the GE Supplier in any given period of time divided by (b) the aggregate amount of the sourcing costs incurred by the Newco Group with respect to such Seller Good purchased by the Newco Group from the GE Group and third party suppliers in the same period of time.

  • Xxxxx of License Georgia Institute of Technology shall grant the Student a limited, nonexclusive, nontransferable and revocable license to use and occupy an assigned space in a Georgia Institute of Technology facility in accordance with the terms and conditions of this Contract (the “License”). The parties to this Contract do not intend that an estate, a tenancy, or any other interest in property should pass from Georgia Institute of Technology to Student. Instead, it is the intention of the parties that the relationship between Georgia Institute of Technology and Student be that of licensor and licensee and the sole right of Student to use the assigned space as a living unit shall be based upon the License granted in this Contract.

  • Xxxxx of License; Limitations The Engineer is granted a limited revocable non-exclusive license to use the registered TxDOT trademark logo (TxDOT Flying “T”) on any deliverables prepared under this contract that are the property of the State. The Engineer may not make any use of the registered TxDOT trademark logo on any other materials or documents unless it first submits that request in writing to the State and receives approval for the proposed use. The Engineer agrees that it shall not alter, modify, dilute, or otherwise misuse the registered TxDOT trademark logo or bring it into disrepute.

  • Country Specific Terms Appendix A contains additional terms and conditions of the Agreement applicable to Participants residing in those countries. In addition, Appendix A also contains information and notices of exchange control and certain other issues of which the Participant should be aware.

  • WHEXXXX xs xxxx of a plan of reorganization, RESTART PARTNERS., L.P., a Delaware Limited Partnership ("Restart"), may acquire an ownership interest in Elsinore Corporation ("Elsinore") or the Four Queens, Inc. ("FQI");