SUSPENDED CEILINGS. Suspended ceiling comprising fully accessible polyester powder coated perforated metal pan ceiling files, fixed into a non-visible drop-in suspension system. Suspended ceiling includes fully recessed luminaires / downlighters, and grilles etc, fire stopping, access panels and insulations matting fully concealed in black plastic wrapping. Suspension system and fixings are of galvanised steel. The ceiling plank system is laid out on a 1500mm modular grid centred on the base building grid. Perimeter polyester powder coated solid metal margin complete with fully recessed luminaries / downlighters and slot diffusers as necessary. Plasterboard margins bulkhead to perimeter on galvanised steel suspension system, skim coat plaster, mist and three coats of emulsion The office ceiling system has an acoustical absorption NRC value of approximately 0.8.
SUSPENDED CEILINGS. SUPPLEMENTARY PREAMBLES CEILINGS, ETC
SUSPENDED CEILINGS. 9mm CAPCO Plasterboard to receive 50mm wide CAPCO Fibre tape covered with 2 layers of CAPCO joining Compound, all fixed to underside of CAPCO T38/35G Tee Grid System with main tees spaced apart at 1200mm centres and with CAPCO T38/35G cross tees spaced apart at 400mm Centres with Main Tees fixed to 25x25x0.6mm GMS steel angle hangers at 1200mm centres fixed to underside of slab/fixed to roof timber rafters with express nails and to main tees with Wafertek screw, all to be installed in strict accordance with specialist details and Specifications. 2 Ceilings suspended not exceeding 1m below concrete soffits m² Carried to Collection R Unit Quantity Rate Amount 600 x 600 x 6mm Capco Duraceil vinyl clad calcium silicate ceiling tiles, aluminium foil backed with finish - Ripple White, laid onto CKM T38/24W pre-painted white exposed tee grid system. Main tees suspended by means of 19 x 0,5mm GMS strap hangers at 1200mm centres.
SUSPENDED CEILINGS. Proprietary suspended ceilings Note: Aluminium cornices to suspended ceilings COLLECTION PAGE SECTION NO 3
SUSPENDED CEILINGS. (a) Suspended ceilings of modular mineral tiles composed of glasswool or fibreglass, 5/8" thick, dimensions 60/60 cm and/or 120/60 cm will be installed as a level surface in every unit.
(b) Recessed fluorescent light fittings will be installed in all the ceilings.
(c) Plasterboard aprons will be installed as necessary and only in areas were necessitated.
SUSPENDED CEILINGS. Lay-in, grid type, acoustical ceilings shall be provided in the control room, general offices, halls, and toilet, shower, and locker rooms. Acoustical ceilings in toilet, shower, and locker rooms shall be moisture resistant.
SUSPENDED CEILINGS. Pre-Painted 600 x 1200 x 12,5mm BPB Gypsum donnCeil wet felted acoustic sand micro fibre reinforced gypsum panels on Xxxx SQ/T37 lay-in galvanised steel tee suspension system including main and cross tees, necessary hangers, grids, etc, installed strictly according to manufacturer's specification 1 Suspended not exceeding 1m below concrete roof m2 4,933 Carried to Collection R Bill No. 9 BILL NO.9 : CEILINGS, PARTITIONS, ETC Amount 9,5mm "Rhino" gypsum plasterboard with 63mm wide strips of mesh scrim nailed over joints and the joints finished with gypsum skim plaster trowelled to a smooth finish to the thickness recommended by the manufacturer including framework sufficient to hang ceilings fixed to roof trusses or steel purlins to 1 Suspended not exceeding 1m below concrete roof. m2 2,201 Shopfitted wood ceiling colour: Light oak to match Oggie, Legno Rustic natural colour or similar approved 2 Ceilings suspended not exceeding 1m below concrete slab. m2 73
SUSPENDED CEILINGS. Slate floors, skirtings and vanity units Section 4. Tiled floors and walls
SUSPENDED CEILINGS. High quality polyester powder coated perforated metal ceiling planks with 150mm wide trim strip at 3000mm centres, with a 40mm intermediate trim at 1500mm. All planks lift out. The light fittings and diffusers are accommodated within matching plain tiles. Tile perforation: Micro-perforation with 10mm plain borders. Finish: RAL 9010 white, 20% gloss at 60 degrees. Acoustic packing: An insulation material with a density of not less than 80 kg/m2 faced with a black glass fibre sheet fully encapsulated, foil backed in a sealed and non - combustible envelope, with a 1mm zinc sheet backing.
SUSPENDED CEILINGS. In the office spaces and hallways, as suspended plasterboard ceilings with lighting fixtures mounted on them. In the restrooms, a suspended ceiling of LM panels with cutouts for light fixtures and ventilation.
