Conformity Assessment Procedures 1. Each Party shall give positive consideration to accepting the results of conformity assessment procedures of other Parties, even where those procedures differ from its own, provided it is satisfied that those procedures offer an assurance of conformity with applicable technical regulations or standards equivalent to its own procedures. 2. Each Party shall seek to enhance the acceptance of the results of conformity assessment procedures conducted in the territories of other Parties with a view to increasing efficiency, avoiding duplication and ensuring cost effectiveness of the conformity assessments. In this regard, each Party may choose, depending on the situation of the Party and the specific sectors involved, a broad range of approaches. These may include but are not limited to: (a) recognition by a Party of the results of conformity assessments performed in the territory of another Party; (b) recognition of co-operative arrangements between accreditation bodies in the territories of the Parties; (c) mutual recognition of conformity assessment procedures conducted by bodies located in the territory of each Party; (d) accreditation of conformity assessment bodies in the territory of another Party; (e) use of existing regional and international multilateral recognition agreements and arrangements; (f) designating conformity assessment bodies located in the territory of another Party to perform conformity assessment; and (g) suppliers’ declaration of conformity. 3. Each Party shall exchange information with other Parties on its experience in the development and application of the approaches in Paragraph 2(a) to (g) and other appropriate approaches with a view to facilitating the acceptance of the results of conformity assessment procedures. 4. A Party shall, upon request of another Party, explain its reasons for not accepting the results of any conformity assessment procedure performed in the territory of that other Party.
Updated Information Submission by Interconnection Customer The updated information submission by the Interconnection Customer, including manufacturer information, shall occur no later than one hundred eighty (180) Calendar Days prior to the Trial Operation. The Interconnection Customer shall submit a completed copy of the Electric Generating Unit data requirements contained in Appendix 1 to the LGIP. It shall also include any additional information provided to the Participating TO and the CAISO for the Interconnection Studies. Information in this submission shall be the most current Electric Generating Unit design or expected performance data. Information submitted for stability models shall be compatible with the Participating TO and CAISO standard models. If there is no compatible model, the Interconnection Customer will work with a consultant mutually agreed to by the Parties to develop and supply a standard model and associated information.
Withdrawal of Services 50.1 Notwithstanding anything contained in this Agreement, except as otherwise required by Applicable Law, Verizon may terminate its offering and/or provision of any Service under this Agreement upon thirty (30) days prior written notice to CBB. 50.2 Notwithstanding anything contained in this Agreement, except as otherwise required by Applicable Law, Verizon may with thirty (30) days prior written notice to CBB terminate any provision of this Agreement that provides for the payment by Verizon to CBB of compensation related to traffic, including, but not limited to, Reciprocal Compensation and other types of compensation for termination of traffic delivered by Verizon to CBB. Following such termination, except as otherwise agreed in writing by the Parties, Verizon shall be obligated to provide compensation to CBB related to traffic only to the extent required by Applicable Law. If Verizon exercises its right of termination under this Section, the Parties shall negotiate in good faith appropriate substitute provisions for compensation related to traffic; provided, however, that except as otherwise voluntarily agreed by Verizon in writing in its sole discretion, Verizon shall be obligated to provide compensation to CBB related to traffic only to the extent required by Applicable Law. If within thirty (30) days after Verizon’s notice of termination the Parties are unable to agree in writing upon mutually acceptable substitute provisions for compensation related to traffic, either Party may submit their disagreement to dispute resolution in accordance with Section 14 of this Agreement.
Withdrawal of Grievance A grievance may be withdrawn at any level without establishing a precedent.
Payment for Material Completion The Contractor may request payment of the remaining contract balance, including retainage, less amounts credited the Owner or incurred as liquidated damages, and less amounts withheld for the Punchlist by reason of Minor Items or Permitted Incomplete Work (See Paragraph 6.5.3.2). Payment for Material Completion shall be made by a check payable jointly to the Contractor and Surety and shall be mailed to the Surety.
MOTION FOR FINAL APPROVAL Not later than 16 court days before the calendared Final Approval Hearing, Plaintiff will file in Court, a motion for final approval of the Settlement that includes a request for approval of the PAGA settlement under Labor Code section 2699, subd. (l), a Proposed Final Approval Order and a proposed Judgment (collectively “Motion for Final Approval”). Plaintiff shall provide drafts of these documents to Defense Counsel not later than seven days prior to filing the Motion for Final Approval. Class Counsel and Defense Counsel will expeditiously meet and confer in person or by telephone, and in good faith, to resolve any disagreements concerning the Motion for Final Approval.
Withdrawal Events In the event of the death, retirement, withdrawal, expulsion, or dissolution of a Member, or an event of bankruptcy or insolvency, as hereinafter defined, with respect to a Member, or the occurrence of any other event which terminates the continued membership of a Member in the Company pursuant to the Statutes (each of the foregoing being hereinafter referred to as a “Withdrawal Event”), the Company shall terminate sixty days after notice to the Members of such withdrawal Event unless the business of the Company is continued as hereinafter provided. Notwithstanding a Withdrawal Event with respect to a Member, the Company shall not terminate, irrespective of applicable law, if within aforesaid sixty day period the remaining Members, by the unanimous vote or consent of the Members (other than the Member who caused the Withdrawal Event), shall elect to continue the business of the Company. In the event of a Withdrawal Event with respect to an Member, any successor in interest to such Member (including without limitation any executor, administrator, heir, committee, guardian, or other representative or successor) shall not become entitled to any rights or interests of such Member in the Company, other than the allocations and distributions to which such Member is entitled, unless such successor in interest is admitted as a Member in accordance with this Agreement. An “event of bankruptcy or insolvency” with respect to a Member shall occur if such Member:
Program Compliance The School Board shall be responsible for monitoring the program to provide technical assistance and to ensure program compliance.
Loop Testing/Trouble Reporting 2.1.6.1 Telepak Networks will be responsible for testing and isolating troubles on the Loops. Telepak Networks must test and isolate trouble to the BellSouth portion of a designed/non-designed unbundled Loop (e.g., UVL-SL2, UCL-D, UVL-SL1, UCL-ND, etc.) before reporting repair to the UNE Customer Wholesale Interconnection Network Services (CWINS) Center. Upon request from BellSouth at the time of the trouble report, Telepak Networks will be required to provide the results of the Telepak Networks test which indicate a problem on the BellSouth provided Loop. 2.1.6.2 Once Telepak Networks has isolated a trouble to the BellSouth provided Loop, and had issued a trouble report to BellSouth on the Loop, BellSouth will take the actions necessary to repair the Loop if a trouble actually exists. BellSouth will repair these Loops in the same time frames that BellSouth repairs similarly situated Loops to its End Users. 2.1.6.3 If Telepak Networks reports a trouble on a non-designed or designed Loop and no trouble actually exists, BellSouth will charge Telepak Networks for any dispatching and testing (both inside and outside the CO) required by BellSouth in order to confirm the Loop’s working status. 2.1.6.4 In the event BellSouth must dispatch to the end-user’s location more than once due to incorrect or incomplete information provided by Telepak Networks (e.g., incomplete address, incorrect contact name/number, etc.), BellSouth will xxxx Xxxxxxx Networks for each additional dispatch required to repair the circuit due to the incorrect/incomplete information provided. BellSouth will assess the applicable Trouble Determination rates from BellSouth’s FCC or state tariffs.
Completion of Concrete Pours and Emergency Work (a) Except as provided in this sub-clause an Employee shall nor work or be required to work in the rain. (b) Employees shall not be required to start a concrete pour in Inclement Weather. (c) Where a concrete pour has been commenced prior to the commencement of a period of Inclement Weather Employees may be required to complete such concrete pour to a practical stage and for such work shall be paid at the rate of double time calculated to the next hour, and in the case of wet weather shall be provided with adequate wet weather gear. (d) If an Employee’s clothes become wet as a result of working in the rain during a concrete pour the Employee shall, unless the Employee has a change of dry working clothes available, be allowed to go home without loss of pay. (e) The provisions of clauses 32.7(c) and 32.7(d) hereof shall also apply in the case of emergency work where the Employees concerned and their delegates agree that the work is of an emergency nature and can start and/or proceed.