TECHNOLOGY DEVELOPMENT AND TRANSFER Sample Clauses

TECHNOLOGY DEVELOPMENT AND TRANSFER. 1. All Parties, noting the importance of technology to support the implementation of mitigation and adaptation efforts under this Agreement and recognizing existing deployment and dissemination efforts, [shall][should][other] strengthen cooperative action to promote and enhance technology development and transfer, improve enabling environments for and address barriers to the dissemination and uptake of technology, and xxxxxx cooperative approaches to research and development. 2. The CMA shall, at its first session, consider and adopt a technology framework in accordance with the guidelines contained in decision 1/CP.
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs
TECHNOLOGY DEVELOPMENT AND TRANSFER. 1. All Parties[, in accordance with the principles and provisions of the Convention, in particular Article 4 [and Article 11]], noting the importance of [meeting the] technology [requirements] for the implementation of mitigation and adaptation actions under this Agreement and recognizing existing deployment and dissemination efforts [and the urgency of realizing technology development and transfer], [shall][should] strengthen cooperative action [among Parties] [to accelerate and upscale] [on] [technology development and transfer] [through] [, inter alia: (a) [Improving endogenous capacities and enabling environments according to nationally determined needs and priorities, in accordance with Article 4, paragraph 5, of the Convention]; (b) [Addressing barriers [in accessing to][for] the transfer of safe, appropriate and environmentally and socially sound technologies [by developing countries];] (c) Fostering cooperative approaches to research and development]. 2. Parties share the long-term vision for technology development and transfer to improve resilience to climate change and reduce emissions. 3. A technology framework is hereby established to pursue that vision, including to enhance the development and transfer of socially and environmentally sound technologies.
Sample 1Sample 2Sample 3See All (4)
TECHNOLOGY DEVELOPMENT AND TRANSFER. 1. All Parties[, in accordance with the principles and provisions of the Convention, in particular Article 4 [and Article 11]], noting the importance of [meeting the] technology [requirements] for the implementation of mitigation and adaptation actions under this Agreement and recognizing existing deployment and dissemination efforts, [shall][should] strengthen cooperative action [among Parties] [to accelerate and upscale] [on] [technology development and transfer] [through]; [inter alia: (a) [Improve endogenous capacities and enabling environment according to nationally determined needs and priorities, in accordance with Article 4.5 of the Convention] (b) Address barriers [in accessing to][for] the transfer of safe, appropriate and environmentally, and socially sound technologies [by developing countries]; and (c) Xxxxxx cooperative approaches to research and development].
Sample 1Sample 2See All (4)
TECHNOLOGY DEVELOPMENT AND TRANSFER. 1. All Parties[, in accordance with the principles and provisions of the Convention, in particular Article 4 [and Article 11]], noting the importance of technology for the implementation of mitigation and adaptation actions under this Agreement and recognizing existing deployment and dissemination efforts, [shall][should] strengthen cooperative action [to accelerate and upscale] [on] [technology development and transfer] [through] [, inter alia: (a) [Improving endogenous capacities and enabling environments according to nationally determined needs and priorities, in accordance with Article 4, paragraph 5, of the Convention]; (b) [Addressing barriers [in accessing to][for] the transfer of safe, appropriate and environmentally and socially sound technologies [by developing countries];] (c) Fostering cooperative approaches to research and development]. 2. Parties share a long-term vision on the importance of fully realizing technology development and transfer in order to improve resilience to climate change and to reduce greenhouse gas emissions. 3. A technology framework is hereby established to provide overarching guidance to the work of the Technology Mechanism in promoting and facilitating enhanced action on technology development and transfer in order to support the implementation of this Agreement, in pursuit of the long-term vision referred to in paragraph 2 of this Article.
Sample 1Sample 2Sample 3
TECHNOLOGY DEVELOPMENT AND TRANSFER. [Decides to strengthen the technology needs assessment (TNA) process, taking into account existing efforts, including under the Poznan strategic programme on technology transfer, by enhancing:
Sample 1
TECHNOLOGY DEVELOPMENT AND TRANSFER. All Parties, in accordance with the principles and provisions of the convention, in particular Article 4, paragraphs 1,3,5 and 7, and Article 11, noting the importance of meeting the technology requirements to support the implementation of mitigation and adaptation efforts under this Agreement and recognizing existing deployment and dissemination efforts, [shall][should][other] strengthen cooperative action to promote and enhance technology development and transfer, improve enabling environments for and address barriers to the dissemination and uptake of technology, and xxxxxx cooperative approaches to research and development.
Sample 1
TECHNOLOGY DEVELOPMENT AND TRANSFER. 1. All Parties, noting the importance of technology to support the implementation of mitigation and adaptation efforts under this Agreement and recognizing existing deployment and dissemination efforts, [shall][should][other] strengthen cooperative action to promote and enhance technology development and transfer, improve enabling environments for and address barriers to the dissemination and uptake of technology, and xxxxxx cooperative approaches to research and development. 1alt. Developed country Parties and other developed country Parties included in Annex II of the Convention shall provide support for the research, development and application of environmentally sound technologies and facilitate the transfer of and access to such technologies for developing country Parties, including inter alia strengthening cooperative action, providing financial resources to address barriers caused by the absence of domestic research and development capability and innovationsand enhancing access to environmentally sound technologies and know- how. 1bis The [CMA] shall, at its first session, establish a global goal for technology development and transfer, under which developed country Parties shall regularly prepare, communicate and implement their commitments on provision of developed country Parties’ ready-for-transfer technologies and know-how as well as providing financial resources for collaborative research and development of environmentally sound technologies and enhancing accesses of developing countries to such technologies, that match developing country Parties’ technology needs, in order to progressively scale up the support and cooperation for technology development and transfer, taking into account the limit to global average temperature increase referred to in paragraph 2 of Article 2 of the agreement. 2. The CMA shall, at its first session, consider and adopt a technology framework in accordance with the guidelines contained in decision 1/CP.
Sample 1
AutoNDA by SimpleDocs
TECHNOLOGY DEVELOPMENT AND TRANSFER 
Sample 1

Related to TECHNOLOGY DEVELOPMENT AND TRANSFER

  • Technology Transfer (a) Sublicensee acknowledges and agrees that ECC has delivered and made to Sublicensee a disclosure of a general introduction to the Technology and to its commercial feasibility prior to the execution of this Agreement. Except to the extent such information falls within one or more of the exceptions to the definition of "Confidential Information", all information disclosed by ECC to Sublicensee prior to the execution of this Agreement shall be deemed to constitute part of the Technology and shall be deemed to be confidential. The timing and extent of additional disclosure by ECC to Sublicensee shall be as set forth in subparagraph 22(b) hereof. (b) Upon execution of this Agreement, ECC shall provide Sublicensee with copies of the patents listed in Section B of Exhibit "B" hereto. Beyond that, ECC shall not be required to provide additional information concerning, or disclosure of, the Technology to Sublicensee until Sublicensee provides to ECC (i) written notice of Sublicensee's intent to commercialize a Product, which written notice shall include detailed specifications for the designated Product, and (ii) evidence, reasonably satisfactory to ECC, of Sublicensee's intent to commercialize the designated Product in the form of written documentation of orders placed by Sublicensee of the equipment needed by Sublicensee to produce and commercialize the designated Product or in the form of written documentation from Sublicensee confirming the dedication and/or modification of existing equipment necessary to produce the designated Product. Within ninety (90) days after ECC's receipt of the items described in the preceding sentence, ECC shall provide to Sublicensee the following additional disclosure: (w) a Product specific recipe for the production of the designated Product; (x) Product specific process specifications for the production of the designated Product; (y) copies of all patent applications listed in the Exhibits hereto that ECC deems relevant to the production of the designated Product; and (z) a list of known raw materials suppliers and preferred equipment vendors.

  • Information Systems Acquisition Development and Maintenance a. Client Data – Client Data will only be used by State Street for the purposes specified in this Agreement.

  • Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer: (a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process; (b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process; (c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards); (d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and (e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.

  • Technology License 4.1 Unless any event described in Article 2.2 or 2.3 of this Agreement occurs, all of the technology required to be licensed for any of Party B’s business shall be provided by Party A on an exclusive basis. Party A will try its best to license Party B to use the technology owned by Party A, or re-license Party B to use the technology as approved by the owner. 4.2 The Parties shall negotiate with each other to enter into specific technology license contracts to expressly specify the detail matters such as the technology to be licensed, the method to license the technology, license fees and payment.

  • Technology Access Contractor expressly acknowledges that state funds may not be expended in connection with the purchase of an automated information system unless that system meets certain statutory requirements relating to accessibility by persons with visual impairments. Accordingly, Contractor represents and warrants to System Agency that the technology provided to System Agency for purchase (if applicable under this Contract or any related Solicitation) is capable, either by virtue of features included within the technology or because it is readily adaptable by use with other technology, of: • providing equivalent access for effective use by both visual and non-visual means; • presenting information, including prompts used for interactive communications, in formats intended for non-visual use; and • being integrated into networks for obtaining, retrieving, and disseminating information used by individuals who are not blind or visually impaired. For purposes of this Section, the phrase “equivalent access” means a substantially similar ability to communicate with or make use of the technology, either directly by features incorporated within the technology or by other reasonable means such as assistive devices or services which would constitute reasonable accommodations under the Americans With Disabilities Act or similar state or federal laws. Examples of methods by which equivalent access may be provided include, but are not limited to, keyboard alternatives to mouse commands and other means of navigating graphical displays, and customizable display appearance. In accordance with Section 2157.005 of the Texas Government Code, the Technology Access Clause contract provision remains in effect for any contract entered into before September 1, 2006.

  • EMPLOYEE DEVELOPMENT AND TRAINING 1. The State agrees to provide advice and counseling to employees with respect to career advancement opportunities and agency developments which have an impact on their careers. 2. Regular review of its job-related and career development and training programs will be made by the State in order to provide suitable programs for employees covered by this Agreement. When undertaking any such review, the State shall notify employees of such review and take into account suggestions and proposals made by employees. 3. Employees shall be given a reasonable notice of applicable, development and training programs available. Such notice shall include an explanation of the procedure for applying for the program. Notices of development and training programs shall be posted for reasonable periods in advance on bulletin boards at applicable work locations within the agencies involved. An appointing authority shall make every effort to permit employees' participation in such career development and training programs. Participation in any training inside or outside of work hours which is required by the State as a condition of fulfilling the requirements of the employee's job, or any in-service State training which is conducted or undertaken during normally scheduled work hours will be considered as time worked. 4. The State shall pay tuition, course-related fees, other approved course required costs and for necessary travel and lodging pursuant to established policies and procedures.

  • Skills Development The Company acknowledges the changing pace of technology in the electrical contracting industry and the need for employees to understand those changes and have the necessary skill requirements to keep the Company at the forefront of the industry. The Parties to this Agreement recognise that in order to increase the efficiency, productivity and competitiveness of the Company, a commitment to training and skill development is required. Accordingly, the parties commit themselves to: i) Developing a more highly skilled and flexible workforce. ii) Providing employees with career opportunities through appropriate training to acquire the additional skills as required by the Company. Taking into account; The current and future skill needs of the Company. The size, structure and nature of the Company. The need to develop vocational skills relevant to the Company and the Electrical Contracting Industry. Where, by agreement between the employee and employer, an employee undertakes training providing skills, which are not a company specific requirement, any time spent in the completion of this training shall be unpaid.

  • Business Development Company Buyer is a business development company as defined in Section 202(a)(22) of the Investment Advisors Act of 1940.

  • Innovation In order to make it easier for the municipality to implement innovations that can accelerate the pace of climate transition, Viable Cities will provide a competence network and process support, including by engaging other strategic innovation programmes in the ongoing development of Climate City Contract 2030, particu- larly in the areas of mobility, energy, built environment, the circular economy, health and digitalization. Based on the collaboration agreement on climate-smart mobility signed with the strategic innovation programme Drive Sweden, this area of collabo- ration will be further developed with both cities and government agencies, not least the Swedish Transport Administration.

  • Staff Development ‌ The County and the Association agree that the County retains full authority to determine training needs, resources that can be made available, and the method of payment for training authorized by the County. Nothing in this subsection shall preclude the right of an employee to request specific training.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!