Common use of TOOLS AND MATERIALS Clause in Contracts

TOOLS AND MATERIALS. 13.1 All special dies, tooling, moulds, patterns, jigs, fixtures, and any other property which Pall Australia furnishes to Supplier or specifically pays for to be used by the Supplier in the performance of this Purchase Order (“Equipment”), shall be and remain Pall Australia’s property, shall be: (a) kept separate and marked to reflect it is the property of Pall Australia, (b) subject to removal upon Pall Australia’s instruction, (c) for Pall Australia’s exclusive use, (d) held at Supplier’s risk, and (e) kept insured by Supplier at Supplier’s expense while in Supplier’s custody or control in an amount equal to the replacement cost, with loss payable by Supplier. Supplier shall indemnify Pall Australia against all actions, claims, demands, damage, liabilities, costs, charges or expenses suffered or incurred by Pall Australia arising from a claim by Supplier’s employees, agents or consultants for bodily injury or death in connection with the operation of the Equipment while in Supplier’s care, custody and control. 13.2 Where Pall Australia provides free issue material for incorporation into the work, Supplier shall use such materials economically, and any surplus shall be accounted for to Pall Australia and disposed of in accordance with Pall Australia’s instructions. Waste, loss or damage to such materials arising from poor workmanship or Supplier’s failure to maintain such materials in good order or condition shall be made good at Supplier’s expense, replacements being of equivalent quality and specification and subject to Pall Australia’s approval.

TOOLS AND MATERIALS. 13.1 All special dies, tooling, moulds, patterns, jigs, fixtures, and any other property which Pall Australia New Zealand furnishes to Supplier or specifically pays for to be used by the Supplier in the performance of this Purchase Order (“Equipment”), shall be and remain Pall AustraliaNew Zealand’s property, shall be: (a) kept separate and marked to reflect it is the property of Pall AustraliaNew Zealand, (b) subject to removal upon Pall AustraliaNew Zealand’s instruction, (c) for Pall AustraliaNew Zealand’s exclusive use, (d) held at Supplier’s risk, and (e) kept insured by Supplier at Supplier’s expense while in Supplier’s custody or control in an amount equal to the replacement cost, with loss payable by Supplier. Supplier shall indemnify Pall Australia New Zealand, against all actions, claims, demands, damage, liabilities, costs, charges or expenses suffered or incurred by Pall Australia New Zealand arising from a claim by Supplier’s employees, agents or consultants for bodily injury or death in connection with the operation of the Equipment while in Supplier’s care, custody and control. 13.2 Where Pall Australia New Zealand provides free issue material for incorporation into the work, Supplier shall use such materials economically, and any surplus shall be accounted for to Pall Australia New Zealand and disposed of in accordance with Pall AustraliaNew Zealand’s instructions. Waste, loss or damage to such materials arising from poor workmanship or Supplier’s failure to maintain such materials in good order or condition shall be made good at Supplier’s expense, replacements being of equivalent quality and specification and subject to Pall AustraliaNew Zealand’s approval.

TOOLS AND MATERIALS. 13.1 All special dies, tooling, moulds, patterns, jigs, fixtures, and any other property which Pall Australia Taiwan furnishes to Supplier or specifically pays for to be used by the Supplier in the performance of this Purchase Order (“Equipment”), shall be and remain Pall AustraliaTaiwan’s property, shall be: (a) kept separate and marked to reflect it is the property of Pall AustraliaTaiwan, (b) subject to removal upon Pall AustraliaTaiwan’s instruction, (c) for Pall AustraliaTaiwan’s exclusive use, (d) held at Supplier’s risk, and (e) kept insured by Supplier at Supplier’s expense while in Supplier’s custody or control in an amount equal to the replacement cost, with loss payable by Supplier. Supplier shall indemnify Pall Australia Taiwan against all actions, claims, demands, damage, liabilities, costs, charges or expenses suffered or incurred by Pall Australia Taiwan arising from a claim by Supplier’s employees, agents or consultants for bodily injury or death in connection with the operation of the Equipment while in Supplier’s care, custody and control. 13.2 Where Pall Australia Taiwan provides free issue material for incorporation into the work, Supplier shall use such materials economically, and any surplus shall be accounted for to Pall Australia Taiwan and disposed of in accordance with Pall AustraliaTaiwan’s instructions. Waste, loss or damage to such materials arising from poor workmanship or Supplier’s failure to maintain such materials in good order or condition shall be made good at Supplier’s expense, replacements being of equivalent quality and specification and subject to Pall AustraliaTaiwan’s approval.

TOOLS AND MATERIALS. 13.1 All special dies, tooling, moulds, patterns, jigs, fixtures, and any other property which Pall Australia Indonesia furnishes to Supplier or specifically pays for to be used by the Supplier in the performance of this Purchase Order (“Equipment”), shall be and remain Pall AustraliaIndonesia’s property, shall be: (a) kept separate and marked to reflect it is the property of Pall AustraliaIndonesia, (b) subject to removal upon Pall AustraliaIndonesia’s instruction, (c) for Pall AustraliaIndonesia’s exclusive use, (d) held at Supplier’s risk, and (e) kept insured by Supplier at Supplier’s expense while in Supplier’s custody or control in an amount equal to the replacement cost, with loss payable by Supplier. Supplier shall indemnify Pall Australia Indonesia against all actions, claims, demands, damage, liabilities, costs, charges or expenses suffered or incurred by Pall Australia Indonesia arising from a claim by Supplier’s employees, agents or consultants for bodily injury or death in connection with the operation of the Equipment while in Supplier’s care, custody and control. 13.2 Where Pall Australia Indonesia provides free issue material for incorporation into the work, Supplier shall use such materials economically, and any surplus shall be accounted for to Pall Australia Indonesia and disposed of in accordance with Pall AustraliaIndonesia’s instructions. Waste, loss or damage to such materials arising from poor workmanship or Supplier’s failure to maintain such materials in good order or condition shall be made good at Supplier’s expense, replacements being of equivalent quality and specification and subject to Pall AustraliaIndonesia’s approval.

TOOLS AND MATERIALS. 13.1 All special dies, tooling, moulds, patterns, jigs, fixtures, and any other property which Pall Australia India furnishes to Supplier or specifically pays for to be used by the Supplier in the performance of this Purchase Order (“Equipment”), shall be and remain Pall AustraliaIndia’s property, shall be: (a) kept separate and marked to reflect it is the property of Pall AustraliaIndia, (b) subject to removal upon Pall AustraliaIndia’s instruction, (c) for Pall AustraliaIndia’s exclusive use, (d) held at Supplier’s risk, and (e) kept insured by Supplier at Supplier’s expense while in Supplier’s custody or control in an amount equal to the replacement cost, with loss payable by Supplier. Supplier shall indemnify Pall Australia India against all actions, claims, demands, damage, liabilities, costs, charges or expenses suffered or incurred by Pall Australia India arising from a claim by Supplier’s employees, agents or consultants for bodily injury or death in connection with the operation of the Equipment while in Supplier’s care, custody and control. 13.2 Where Pall Australia India provides free issue material for incorporation into the work, Supplier shall use such materials economically, and any surplus shall be accounted for to Pall Australia India and disposed of in accordance with Pall AustraliaIndia’s instructions. Waste, loss or damage to such materials arising from poor workmanship or Supplier’s failure to maintain such materials in good order or condition shall be made good at Supplier’s expense, replacements being of equivalent quality and specification and subject to Pall AustraliaIndia’s approval.

TOOLS AND MATERIALS. 13.1 All special dies, tooling, moulds, patterns, jigs, fixtures, and any other property which Pall Australia India furnishes to Supplier or specifically pays for to be used by the Supplier in the performance of this Purchase Order (“Equipment”), shall be and remain Pall AustraliaIndia’s property, property and shall be: (a) kept separate and marked to reflect it is the property of Pall AustraliaIndia, (b) subject to removal upon Pall AustraliaIndia’s instruction, (c) for Pall AustraliaIndia’s exclusive use, (d) held at Supplier’s risk, and (e) kept insured by Supplier at Supplier’s expense while in Supplier’s custody or control in an amount equal to the replacement cost, with loss payable by Supplier. Supplier shall indemnify Pall Australia India against all actions, claims, demands, damage, liabilities, costs, charges or expenses suffered or incurred by Pall Australia India arising from a claim by Supplier’s employees, agents or consultants for bodily injury or death in connection with the operation of the Equipment while in Supplier’s care, custody and control. 13.2 Where Pall Australia India provides free issue material for incorporation into the work, Supplier shall use such materials economically, and any surplus shall be accounted for to Pall Australia India and disposed of in accordance with Pall AustraliaIndia’s instructions. Waste, loss or damage to such materials arising from poor workmanship or Supplier’s failure to maintain such materials in good order or condition shall be made good at Supplier’s expense, replacements being of equivalent quality and specification and subject to Pall AustraliaIndia’s approval.

TOOLS AND MATERIALS. 13.1 All special dies, tooling, moulds, patterns, jigs, fixtures, and any other property which Pall Australia Taiwan furnishes to Supplier or specifically pays for to be used by the Supplier in the performance of this Purchase Order (“Equipment”), shall be and remain Pall AustraliaTaiwan’s property, shall be: (a) kept separate and marked to reflect it is the property of Pall AustraliaTaiwan, (b) subject to removal upon Pall AustraliaTaiwan’s instruction, (c) for Pall AustraliaTaiwan’s exclusive use, (d) held at Supplier’s risk, and (e) kept insured by Supplier at Supplier’s expense while in Supplier’s custody or control in an amount equal to the replacement cost, with loss payable by Supplier. Supplier shall indemnify Pall Australia Taiwan against all actions, claims, demands, damage, liabilities, costs, charges or expenses suffered or incurred by Pall Australia Taiwan arising from a froma claim by Supplier’s employees, agents or consultants for bodily injury or death in connection with the operation of the Equipment while in Supplier’s care, custody and control. 13.2 Where Pall Australia Taiwan provides free issue material for incorporation into the work, Supplier shall use such materials economically, and any surplus shall be accounted for to Pall Australia Taiwan and disposed of in accordance with Pall AustraliaTaiwan’s instructions. Waste, loss or damage to such materials arising from poor workmanship or Supplier’s failure to maintain such materials in good order or condition shall be made good at Supplier’s expense, replacements being of equivalent quality and specification and subject to Pall AustraliaTaiwan’s approval.

TOOLS AND MATERIALS. 13.1 All special dies, tooling, moulds, patterns, jigs, fixtures, and any other property which Pall Australia NPML furnishes to Supplier or specifically pays for to be used by the Supplier in the performance of this Purchase Order (“Equipment”), shall be and remain Pall AustraliaNPML’s property, shall be: (a) kept separate and marked to reflect it is the property of Pall AustraliaNPML, (b) subject to removal upon Pall AustraliaNPML’s instruction, (c) for Pall AustraliaNPML’s exclusive use, (d) held at Supplier’s risk, and (e) kept insured by Supplier at Supplier’s expense while in Supplier’s custody or control in an amount equal to the replacement cost, with loss payable by Supplier. Supplier shall indemnify Pall Australia NPML against all actions, claims, demands, damage, liabilities, costs, charges or expenses suffered or incurred by Pall Australia NPML arising from a claim by Supplier’s employees, agents or consultants for bodily injury or death in connection with the operation of the Equipment while in Supplier’s care, custody and control. 13.2 Where Pall Australia NPML provides free issue material for incorporation into the work, Supplier shall use such materials economically, and any surplus shall be accounted for to Pall Australia NPML and disposed of in accordance with Pall AustraliaNPML’s instructions. Waste, loss or damage to such materials arising from poor workmanship or Supplier’s failure to maintain such materials in good order or condition shall be made good at Supplier’s expense, replacements being of equivalent quality and specification and subject to Pall AustraliaNPML’s approval.