[Type of Debris]. [Include a definition of the type of debris. If the state environmental department has given additional approvals and has provided a letter, the letter should be attached.]
[Type of Debris] Sample Clauses
Related to [Type of Debris]
Type of Loans Subject to Section 2.12, each Borrowing shall be comprised entirely of ABR Loans or Eurodollar Loans as the Borrower may request in accordance herewith. Each Lender at its option may make any Eurodollar Loan by causing any domestic or foreign branch or Affiliate of such Lender to make such Loan; provided that any exercise of such option shall not affect the obligation of the Borrower to repay such Loan in accordance with the terms of this Agreement.
Margin of Preference and Reservations 32.1 A margin of preference may be allowed on locally manufactured goods only when the contract is open to international tendering, where the tender is likely to attract foreign goods and where the contract exceeds the threshold specified in the Regulations. 32.2 For purposes of granting a margin of preference on locally manufactured goods under international competitive tendering, a procuring entity shall not subject the items listed below to international tender and hence no margin of preference shall be allowed. The affected items are: a) motor vehicles, plant and equipment which are assembled in Kenya; b) furniture, textile, foodstuffs, oil and gas, information communication technology, steel, cement, leather agro-processing, sanitary products, and other goods made in Kenya; or c) goods manufactured, mined, extracted or grown in Kenya. 32.3 A margin of preference shall not be allowed unless it is specified so in the TDS.
Type of Contract The contract will be a one (1) year term contract from the date of award. Upon mutual agreement by the contractor and OSP, the contract may be renewed on a year-to-year basis, for up to (six (6)) additional (one year terms) or a portion thereof. In no event shall the total contract term be more than seven (7) years.
Type of Business Circle the number that best describes your business or organization. If none of the categories apply, circle number 20 and provide a brief description.
Type of Account The Financial Institution agrees that each Collateral Account is, and will be maintained as, either (a) a “securities account” (as defined in Section 8-501 of the UCC) or (b) a “deposit account” (as defined in Section 9-102(a)(29) of the UCC).
Principal Place of Business; Other Places of Business The principal place of business of the Company is 10000 Xxxx Xxxxxxxx Xxxxx, Suite 220, San Diego, CA 92127. The Company may have such other offices as the Member may designate from time to time.
Type of Option This Option is a Non-Qualified Stock Option.
Number Resources, Rate Center Areas and Routing Points 8.1 Nothing in this Agreement shall be construed to limit or otherwise adversely affect in any manner either Party’s right to employ or to request and be assigned any Central Office Codes (“NXX”) pursuant to the Central Office Code Assignment Guidelines and any relevant FCC or Commission orders, as may be amended from time to time, or to establish, by Tariff or otherwise, Rate Center Areas and Routing Points corresponding to such NXX codes. 8.2 It shall be the responsibility of each Party to program and update its own switches and network systems pursuant to information provided in the LERG in order to recognize and route traffic to the other Party’s assigned NXX codes. Except as expressly set forth in this Agreement, neither Party shall impose any fees or charges whatsoever on the other Party for such activities. 8.3 Unless otherwise required by Commission order, the Rate Center Areas will be the same for each Party. During the term of this Agreement, Onvoy shall adopt the Rate Center Area and Rate Center Points that the Commission has approved for Frontier within the LATA and Tandem serving area. Onvoy shall assign whole NPA-NXX codes to each Rate Center Area unless otherwise ordered by the FCC, the Commission or another governmental entity of appropriate jurisdiction, or the LEC industry adopts alternative methods of utilizing NXXs. 8.4 Onvoy will also designate a Routing Point for each assigned NXX code. Onvoy shall designate one location for each Rate Center Area in which the Onvoy has established NXX code(s) as the Routing Point for the NPA-NXXs associated with that Rate Center Area, and such Routing Point shall be within the same LATA as the Rate Center Area but not necessarily within the Rate Center Area itself. Unless specified otherwise, calls to subsequent NXXs of Onvoy will be routed in the same manner as calls to Xxxxx’s initial NXXs. 8.5 Notwithstanding anything to the contrary contained herein, nothing in this Agreement is intended, and nothing in this Agreement shall be construed, to in any way constrain Onvoy’s choices regarding the size of the local calling area(s) that Onvoy may establish for its Customers, which local calling areas may be larger than, smaller than, or identical to Frontier’s local calling areas.
Interest and Applicable Margins (a) Borrowers shall pay interest to Agent, for the ratable benefit of Lenders in accordance with the various Revolving Credit Advances and Swing Line Loans being made by each Lender, and in respect of all unreimbursed Letters of Credit Obligations, in arrears on each applicable Interest Payment Date, at the following rates: (i) with respect to the Revolving Credit Advances and unreimbursed Letter of Credit Obligations and all other Obligations (other than LIBOR Loans and Swing Line Loans), the Index Rate plus the Applicable Revolver Index Margin per annum or, at the election of Borrower Representative, the applicable LIBOR Rate plus the Applicable Revolver LIBOR Margin per annum, based on the aggregate Revolving Credit Advances outstanding from time to time; and (ii) with respect to the Swing Line Loan, the Index Rate plus the Applicable Revolver Index Margin per annum, based on the aggregate amount of the Swing Line Loan outstanding from time to time. The Applicable Margins, on a per annum basis, are as follows: Applicable Revolver Index Margin 1.50 % Applicable Revolver LIBOR Margin 3.00 % Applicable L/C Margin 3.00 % Applicable Unused Line Fee Margin 0.50 % (b) If any payment on any Loan becomes due and payable on a day other than a Business Day, the maturity thereof will be extended to the next succeeding Business Day (except as set forth in the definition of LIBOR Period) and, with respect to payments of principal, interest thereon shall be payable at the then applicable rate during such extension. (c) All computations of Fees calculated on a per annum basis and interest shall be made by Agent on the basis of a three hundred sixty (360) day year, in each case for the actual number of days occurring in the period for which such interest and Fees are payable. The Index Rate is a floating rate determined for each day. Each determination by Agent of an interest rate and Fees hereunder shall be final, binding and conclusive on Borrowers, absent manifest error. (d) So long as an Event of Default has occurred and is continuing, and at the election of Agent (or upon the written request of Requisite Lenders) confirmed by written notice from Agent to Borrower Representative, the interest rates applicable to the Loans and the Letter of Credit Fees shall be increased by two percentage points (2%) per annum above the rates of interest or the rate of such Fees otherwise applicable hereunder (“Default Rate”), and all outstanding Obligations shall bear interest at the Default Rate applicable to such Obligations. Interest and Letter of Credit Fees at the Default Rate shall accrue from the initial date of such Event of Default until that Event of Default is cured or waived and shall be payable upon demand. (e) So long as no Event of Default has occurred and is continuing, Borrower Representative - shall have the option to (i) request that any Revolving Credit Advance be made as a LIBOR Loan, (ii) convert at any time all or any part of outstanding Loans (other than the Swing Line Loan) from Index Rate Loans to LIBOR Loans, (iii) convert any LIBOR Loan to an Index Rate Loan, subject to payment of LIBOR breakage costs in accordance with Section 1.13(b) if such conversion is made prior to the expiration of the LIBOR Period applicable thereto, or (iv) continue all or any portion of any Loan (other than the Swing Line Loan) as a LIBOR Loan upon the expiration of the applicable LIBOR Period and the succeeding LIBOR Period of that continued Loan shall commence on the first day after the last day of the LIBOR Period of the Loan to be continued. Any Loan or group of Loans having the same proposed LIBOR Period to be made or continued as, or converted into, a LIBOR Loan must be in a minimum amount of $1,000,000 and integral multiples of $100,000 in excess of such amount. Any such election must be made by noon (New York time) on the third (3rd) Business Day prior to (1) the date of any proposed Advance which is to bear interest at the LIBOR Rate, (2) the end of each LIBOR Period with respect to any LIBOR Loans to be continued as such, or (3) the date on which the applicable Borrower wishes to convert any Index Rate Loan to a LIBOR Loan for a LIBOR Period designated by Borrower Representative in such election. If no election is received with respect to a LIBOR Loan by noon (New York time) on the third (3rd) Business Day prior to the end of the LIBOR Period with respect thereto (or if an Event of Default has occurred and is continuing), that LIBOR Loan shall be converted to an Index Rate Loan at the end of its LIBOR Period. Borrower Representative must make such election by notice to Agent in writing, by telecopy or overnight courier. In the case of any conversion or continuation, such election must be made pursuant to a written notice (a “Notice of Conversion/Continuation”) in the form of Exhibit 1.5(e). No Loan may be made as or converted into a LIBOR Loan until the earlier of (i) forty-five (45) days after the Closing Date or (ii) completion of primary syndication as determined by Agent. (f) Notwithstanding anything to the contrary set forth in this Section 1.5, if a court of competent jurisdiction determines in a final order that the rate of interest payable hereunder exceeds the highest rate of interest permissible under law (the “Maximum Lawful Rate”), then so long as the Maximum Lawful Rate would be so exceeded, the rate of interest payable hereunder shall be equal to the Maximum Lawful Rate; provided, that if at any time thereafter the rate of interest payable hereunder is less than the Maximum Lawful Rate, Borrowers shall continue to pay interest hereunder at the Maximum Lawful Rate until such time as the total interest received by Agent, on behalf of Lenders, is equal to the total interest that would have been received had the interest rate payable hereunder been (but for the operation of this paragraph) the interest rate payable since the Closing Date as otherwise provided in this Agreement. Thereafter, interest hereunder shall be paid at the rate(s) of interest and in the manner provided in Sections 1.5(a) through (e) above, unless and until the rate of interest again exceeds the Maximum Lawful Rate, and at that time this paragraph shall again apply. In no event shall the total interest received by any Lender pursuant to the terms hereof exceed the amount that such Lender could lawfully have received had the interest due hereunder been calculated for the full term hereof at the Maximum Lawful Rate. If the Maximum Lawful Rate is calculated pursuant to this paragraph, such interest shall be calculated at a daily rate equal to the Maximum Lawful Rate divided by the number of days in the year in which such calculation is made. If, notwithstanding the provisions of this
Irrigation An irrigation reduced pressure zone (hereinafter referred to as “RPZ”) is required for any irrigation systems and must be installed by the Developer and/or eventual lot owner and tested in accordance with the Minnesota Department of Health Guidelines for Designing Backflow Prevention Assembly Installations (hereinafter referred to as “Guidelines”). The initial test results and certification shall be submitted to the City of Maple Grove Public Works Department. Subsequently, the RPZ must be tested, per the Guidelines, at least annually by a certified tester with the results reported to the City of Maple Grove Building Department and the RPZ must be rebuilt as needed in accordance with the Guidelines. Test/rebuilt reports shall be mailed or faxed to the City of Maple Grove Building Department at (000) 000-0000. The irrigation system shall be designed, and the Plans shall be modified accordingly, prior to the issuance of any permits for the development of the Property, to accommodate a 1-inch water meter and a maximum flow of 50 gallons per minute.
