Common use of Unbundled Sub-Loop Concentration (USLC) Clause in Contracts

Unbundled Sub-Loop Concentration (USLC). 2.8.6.1 Where facilities permit, Lightyear may concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office. 2.8.6.2 USLC, using the Lucent Series 5 equipment, will be offered in two system options. System A will allow up to 96 of Lightyear’s sub-loops to be concentrated onto two or more DS1s. System B will allow an additional 96 of Lightyear’s sub-loops to be concentrated onto two or more additional DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the Remote Terminal site with the serving wire center is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to Lightyear’s demarcation point associated with Lightyear’s collocation space within the SWC that serves the remote terminal (RT). USLC service is offered with or without concentration and with or without a protection DS1. 2.8.6.3 Lightyear is required to deliver its sub-loops to its own cross-box, RT, or other similar device and deliver a single cable to the BellSouth RT. This cable shall be connected, by a BellSouth technician, to a cross-connect panel within the BellSouth RT/cross-box and shall allow Lightyear’s sub-loops to be placed on the USLC and transported to Lightyear’s collocation space at a DS1 level.

Unbundled Sub-Loop Concentration (USLC). 2.8.6.1 Where facilities permit, Lightyear CCI may concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office. 2.8.6.2 USLC, using the Lucent Series 5 equipment, will be offered in two system options. System A will allow up to 96 of LightyearCCI’s sub-loops to be concentrated onto two or more DS1s. System B will allow an additional 96 of LightyearCCI’s sub-loops to be concentrated onto two or more additional DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the Remote Terminal site with the serving wire center is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to LightyearCCI’s demarcation point associated with LightyearCCI’s collocation space within the SWC that serves the remote terminal (RT). USLC service is offered with or without concentration and with or without a protection DS1. 2.8.6.3 Lightyear CCI is required to deliver its sub-loops to its own cross-box, RT, or other similar device and deliver a single cable to the BellSouth RT. This cable shall be connected, connected by a BellSouth technician, technician to a cross-connect panel within the BellSouth RT/cross-box and shall allow LightyearCCI’s sub-loops to be placed on the USLC and transported to LightyearCCI’s collocation space at a DS1 level.

Unbundled Sub-Loop Concentration (USLC). 2.8.6.1 Where facilities permit, Lightyear ACI may concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office. 2.8.6.2 USLC, using the Lucent Series 5 equipment, will be offered in two system options. System A will allow up to 96 of LightyearACI’s sub-loops to be concentrated onto two or more DS1s. System B will allow an additional 96 of LightyearACI’s sub-loops to be concentrated onto two or more additional DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the Remote Terminal site with the serving wire center is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to LightyearACI’s demarcation point associated with LightyearACI’s collocation space within the SWC that serves the remote terminal (RT). USLC service is offered with or without concentration and with or without a protection DS1. 2.8.6.3 Lightyear ACI is required to deliver its sub-loops to its own cross-box, RT, or other similar device and deliver a single cable to the BellSouth RT. This cable shall be connected, by a BellSouth technician, to a cross-connect panel within the BellSouth RT/cross-box and shall allow LightyearACI’s sub-loops to be placed on the USLC and transported to LightyearACI’s collocation space at a DS1 level.

Unbundled Sub-Loop Concentration (USLC). 2.8.6.1 Where facilities permit, Lightyear Access Point may concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office. 2.8.6.2 USLC, using the Lucent Series 5 equipment, will be offered in two system options. System A will allow up to 96 of LightyearAccess Point’s sub-loops to be concentrated onto two or more DS1s. System B will allow an additional 96 of LightyearAccess Point’s sub-sub- loops to be concentrated onto two or more additional DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the Remote Terminal site with the serving wire center is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to LightyearAccess Point’s demarcation point associated with LightyearAccess Point’s collocation space within the SWC that serves the remote terminal (RT). USLC service is offered with or without concentration and with or without a protection DS1. 2.8.6.3 Lightyear Access Point is required to deliver its sub-loops to its own cross-box, RT, or other similar device and deliver a single cable to the BellSouth RT. This cable shall be connected, connected by a BellSouth technician, technician to a cross-connect panel within the BellSouth RT/cross-box and shall allow LightyearAccess Point’s sub-loops to be placed on the USLC and transported to LightyearAccess Point’s collocation space at a DS1 level.

Unbundled Sub-Loop Concentration (USLC). 2.8.6.1 Where facilities permit, Lightyear ATI may concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office. 2.8.6.2 USLC, using the Lucent Series 5 equipment, will be offered in two system options. System A will allow up to 96 of LightyearATI’s sub-loops to be concentrated onto two or more DS1s. System B will allow an additional 96 of LightyearATI’s sub-loops to be concentrated onto two or more additional DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the Remote Terminal site with the serving wire center is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to LightyearATI’s demarcation point associated with LightyearATI’s collocation space within the SWC that serves the remote terminal (RT). USLC service is offered with or without concentration and with or without a protection DS1. 2.8.6.3 Lightyear ATI is required to deliver its sub-loops to its own cross-box, RT, or other similar device and deliver a single cable to the BellSouth RT. This cable shall be connected, by a BellSouth technician, to a cross-connect panel within the BellSouth RT/cross-box and shall allow LightyearATI’s sub-loops to be placed on the USLC and transported to LightyearATI’s collocation space at a DS1 level.

Unbundled Sub-Loop Concentration (USLC). 2.8.6.1 Where facilities permit, Lightyear BSE may concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office. 2.8.6.2 USLC, using the Lucent Series 5 equipment, will be offered in two system options. System A will allow up to 96 of LightyearBSE’s sub-loops to be concentrated onto two or more DS1s. System B will allow an additional 96 of LightyearBSE’s sub-loops to be concentrated onto two or more additional DS1s. One System A may be supplemented with one System B and they both must be physically located in a single Series 5 dual channel bank. A minimum of two DS1s is required for each system (i.e., System A requires two DS1s and System B would require an additional two DS1s or four in total). The DS1 level facility that connects the Remote Terminal site with the serving wire center is known as a Feeder Interface. All DS1 Feeder Interfaces will terminate to LightyearBSE’s demarcation point associated with LightyearBSE’s collocation space within the SWC that serves the remote terminal (RT). USLC service is offered with or without concentration and with or without a protection DS1. 2.8.6.3 Lightyear BSE is required to deliver its sub-loops to its own cross-box, RT, or other similar device and deliver a single cable to the BellSouth RT. This cable shall be connected, connected by a BellSouth technician, technician to a cross-connect panel within the BellSouth RT/cross-box and shall allow LightyearBSE’s sub-loops to be placed on the USLC and transported to LightyearBSE’s collocation space at a DS1 level.