Common use of Unbundled Subloop Distribution Clause in Contracts

Unbundled Subloop Distribution. 2.8.2.1 The USLD facility is a dedicated transmission facility that BellSouth provides from a customer’s point of demarcation to a BellSouth cross-connect device. The BellSouth cross-connect device may be located within a remote terminal (RT) or a stand-alone cross-box in the field or in the equipment room of a building. The USLD media is a copper twisted pair that can be provisioned as a 2-wire or 4-wire facility. BellSouth will make available the following subloop distribution offerings where facilities exist: USLD – Voice Grade (USLD-VG) Unbundled Copper Subloop (UCSL) USLD – Intrabuilding Network Cable (USLD-INC (aka riser cable)) 2.8.2.2 USLD-VG is a copper subloop facility from the cross-box in the field up to and including the point of demarcation at the customer’s premises and may have load coils. 2.8.2.3 UCSL is a copper facility eighteen thousand (18,000) feet or less in length provided from the cross-box in the field up to and including the customer’s point of demarcation. If available, this facility will not have any intervening equipment such as load coils between the customer and the cross-box. 2.8.2.3.1 If Excel requests a UCSL and it is not available, Excel may request the copper Subloop facility be modified pursuant to the ULM process to remove load coils and/or excessive bridged taps. If load coils and/or excessive bridged taps are removed, the facility will be classified as a UCSL. 2.8.2.4 USLD-INC is the distribution facility owned or controlled by BellSouth inside a building or between buildings on the same property that is not separated by a public street or road. USLD-INC includes the facility from the cross-connect device in the building equipment room up to and including the point of demarcation at the customer’s premises. 2.8.2.4.1 Upon request for USLD-INC from Excel, BellSouth will install a cross-connect panel in the building equipment room for the purpose of accessing USLD-INC pairs from a building equipment room. The cross-connect panel will function as a single point of interconnection (SPOI) for USLD-INC and will be accessible by multiple carriers as space permits. BellSouth will place cross-connect blocks in twenty five (25) pair increments for Excel’s use on this cross-connect panel. Excel will be responsible for connecting its facilities to the twenty five (25) pair cross- connect block(s). 2.8.2.5 For access to Voice Grade USLD and UCSL, Excel shall install a cable to the BellSouth cross-box pursuant to the terms and conditions for physical collocation for remote sites set forth in Attachment 4. This cable would be connected by a BellSouth technician within the BellSouth cross-box during the set-up process. Excel’s cable pairs can then be connected to BellSouth’s USL within the BellSouth cross-box by the BellSouth technician. 2.8.2.6 Through the SI process, BellSouth will determine whether access to USLs at the location requested by Excel is technically feasible and whether sufficient capacity exists in the cross-box. If existing capacity is sufficient to meet Excel’s request, then BellSouth will perform the site set-up as described in the CLEC Information Package, located at BellSouth’s Interconnection Web site. 2.8.2.7 The site set-up must be completed before Excel can order Subloop pairs. For the site set-up in a BellSouth cross-connect box in the field, BellSouth will perform the necessary work to splice Excel’s cable into the cross-connect box. For the site set- up inside a building equipment room, BellSouth will perform the necessary work to install the cross-connect panel and the connecting block(s) that will be used to provide access to the requested USLs. 2.8.2.8 Once the site set-up is complete, Excel will request Subloop pairs through submission of a LSR form to the LCSC. OC is required with USL pair provisioning when Excel requests reuse of an existing facility, and the OC charge shall be billed in addition to the USL pair rate. For expedite requests by Excel for Subloop pairs, expedite charges will apply for intervals less than five (5) days. 2.8.2.9 USLs will be provided in accordance with BellSouth’s TR 73600 Unbundled Local Loop Technical Specifications.

Unbundled Subloop Distribution. 2.8.2.1 The USLD facility is a dedicated transmission facility that BellSouth provides from a customer’s point of demarcation to a BellSouth cross-connect device. The BellSouth cross-connect device may be located within a remote terminal (RT) or a stand-alone cross-box in the field or in the equipment room of a building. The USLD media is a copper twisted pair that can be provisioned as a 2-wire or 4-wire facility. BellSouth will make available the following subloop distribution offerings where facilities exist: USLD – Voice Grade (USLD-VG) Unbundled Copper Subloop (UCSL) USLD – Intrabuilding Network Cable (USLD-INC (aka riser cable)) 2.8.2.2 USLD-VG is a copper subloop facility from the cross-box in the field up to and including the point of demarcation at the customer’s premises and may have load coils. 2.8.2.3 UCSL is a copper facility eighteen thousand (18,000) feet or less in length provided from the cross-box in the field up to and including the customer’s point of demarcation. If available, this facility will not have any intervening equipment such as load coils between the customer and the cross-box. 2.8.2.3.1 If Excel VarTec requests a UCSL and it is not available, Excel VarTec may request the copper Subloop facility be modified pursuant to the ULM process to remove load coils and/or excessive bridged taps. If load coils and/or excessive bridged taps are removed, the facility will be classified as a UCSL. 2.8.2.4 USLD-INC is the distribution facility owned or controlled by BellSouth inside a building or between buildings on the same property that is not separated by a public street or road. USLD-INC includes the facility from the cross-connect device in the building equipment room up to and including the point of demarcation at the customer’s premises. 2.8.2.4.1 Upon request for USLD-INC from ExcelVarTec, BellSouth will install a cross-connect panel in the building equipment room for the purpose of accessing USLD-INC pairs from a building equipment room. The cross-connect panel will function as a single point of interconnection (SPOI) for USLD-INC and will be accessible by multiple carriers as space permits. BellSouth will place cross-connect blocks in twenty five (25) pair increments for ExcelVarTec’s use on this cross-connect panel. Excel VarTec will be responsible for connecting its facilities to the twenty five (25) pair cross- cross-connect block(s). 2.8.2.5 For access to Voice Grade USLD and UCSL, Excel VarTec shall install a cable to the BellSouth cross-box pursuant to the terms and conditions for physical collocation for remote sites set forth in Attachment 4. This cable would be connected by a BellSouth technician within the BellSouth cross-box during the set-up process. ExcelVarTec’s cable pairs can then be connected to BellSouth’s USL within the BellSouth cross-box by the BellSouth technician. 2.8.2.6 Through the SI process, BellSouth will determine whether access to USLs at the location requested by Excel VarTec is technically feasible and whether sufficient capacity exists in the cross-box. If existing capacity is sufficient to meet ExcelVarTec’s request, then BellSouth will perform the site set-up as described in the CLEC Information Package, located at BellSouth’s Interconnection Web site. 2.8.2.7 The site set-up must be completed before Excel VarTec can order Subloop pairs. For the site set-up in a BellSouth cross-connect box in the field, BellSouth will perform the necessary work to splice ExcelVarTec’s cable into the cross-connect box. For the site set- set-up inside a building equipment room, BellSouth will perform the necessary work to install the cross-connect panel and the connecting block(s) that will be used to provide access to the requested USLs. 2.8.2.8 Once the site set-up is complete, Excel VarTec will request Subloop pairs through submission of a LSR form to the LCSC. OC is required with USL pair provisioning when Excel VarTec requests reuse of an existing facility, and the OC charge shall be billed in addition to the USL pair rate. For expedite requests by Excel VarTec for Subloop pairs, expedite charges will apply for intervals less than five (5) days. 2.8.2.9 USLs will be provided in accordance with BellSouth’s TR 73600 Unbundled Local Loop Technical Specifications.

Unbundled Subloop Distribution. 2.8.2.1 The USLD facility is a dedicated transmission facility transmissionfacility that BellSouth AT&T provides from a froma customer’s point of demarcation to a BellSouth toa AT&T cross-connect device. The BellSouth AT&T cross-connect device may be located within a remote terminal (RT) or a stand-alone cross-box in the field or in the equipment room of roomof a building. The USLD media USLDmedia is a copper twisted pair that can be provisioned as a 2-wire or wireor 4-wire facility. BellSouth AT&T will make available the following subloop followingsubloop distribution offerings where facilities exist: USLD – Voice Grade (USLD-VG) Unbundled Copper Subloop (UCSL) USLD – Intrabuilding Network Cable (USLD-INC (aka riser cable)) 2.8.2.2 USLD-VG is a copper subloop facility from facilityfrom the cross-box in the field up to and including the point of demarcation at the customer’s premises and may have load coils. 2.8.2.3 UCSL is a copper facility eighteen facilityeighteen thousand (18,000) feet or less in xxxxxx length provided from the cross-cross- box in the field up to and including the customer’s point of demarcation. If available, this facility will not have any intervening equipment such as load coils between the customer and the cross-box. 2.8.2.3.1 If Excel AIN/Birch requests a UCSL and it is not available, Excel AIN/Birch may request the copper Subloop facility be modified pursuant to the ULM process ULMprocess to remove load coils and/or excessive and/orexcessive bridged taps. If load coils and/or excessive bridged taps are removed, the facility will be classified beclassified as a UCSL. 2.8.2.4 USLD-INC is the distribution facility owned or ownedor controlled by BellSouth AT&T inside a building or between buildings on the same property that is not separated by a public street or road. USLD-INC includes the facility from the fromthe cross-connect device in the building buildni g equipment room up roomup to and including the point of demarcation at the customer’s premises. 2.8.2.4.1 Upon request for USLD-INC from ExcelfromAIN/Birch, BellSouth will AT&Twill install a cross-connect panel in the building equipment room for the purpose of accessing USLD-INC pairs from a froma building equipment room. The cross-connect panel will function as a single point of interconnection (SPOI) for USLD-INC and will be accessible by multiple carriers as space permits. BellSouth AT&T will place cross-connect blocks in twenty five (25) pair increments for Excel’s AIN/Xxxxx’x use on this cross-connect panelconnectpanel. Excel AIN/Birch will be responsible for connecting its facilities to the twenty five (25) pair cross- cross-connect block(s). 2.8.2.5 For access to Voice Grade USLD and UCSL, Excel AIN/Birch shall install a cable to the BellSouth AT&T cross-box pursuant to the terms and conditions for physical collocation for remote sites set forth in Attachment 4. This cable would be connected by a BellSouth technician within the BellSouth cross-box during the set-up process. Excel’s cable pairs can then be connected to BellSouth’s USL within the BellSouth cross-box by the BellSouth technician. 2.8.2.6 Through the SI process, BellSouth will determine whether access to USLs at the location requested by Excel is technically feasible and whether sufficient capacity exists in the cross-box. If existing capacity is sufficient to meet Excel’s request, then BellSouth will perform the site set-up as described in the CLEC Information Package, located at BellSouth’s Interconnection Web site. 2.8.2.7 The site set-up must be completed before Excel can order Subloop pairs. For the site set-up in a BellSouth cross-connect box in the field, BellSouth will perform the necessary work to splice Excel’s cable into the cross-connect box. For the site set- up inside a building equipment room, BellSouth will perform the necessary work to install the cross-connect panel and the connecting block(s) that will be used to provide access to the requested USLs. 2.8.2.8 Once the site set-up is complete, Excel will request Subloop pairs through submission of a LSR form to the LCSC. OC is required with USL pair provisioning when Excel requests reuse of an existing facility, and the OC charge shall be billed in addition to the USL pair rate. For expedite requests by Excel for Subloop pairs, expedite charges will apply for intervals less than five (5) days. 2.8.2.9 USLs will be provided in accordance with BellSouth’s TR 73600 Unbundled Local Loop Technical Specifications.Attachment

Unbundled Subloop Distribution. 2.8.2.1 The USLD facility is a isa dedicated transmission facility transmissionfacility that BellSouth provides AT&Tprovides from a customer’s point of demarcation to a BellSouth AT&T cross-connect device. The BellSouth AT&T cross-connect device may be located within a remote terminal (RT) or a stand-alone cross-box in the field or in the equipment room of a building. The USLD media is a copper twisted pair that can be provisioned as a 2-wire or 4-wire facility. BellSouth will AT&Twill make available the following subloop distribution followinsgubloop distribuiton offerings where wheer facilities exist: USLD – Voice Grade (USLD-VG) Unbundled Copper Subloop (UCSL) USLD – Intrabuilding Network Cable (USLD-INC (aka riser cable)) 2.8.2.2 USLD-VG is a copper subloop facility from facilitfyrom the cross-box in the field up fiedlup to and including the point of demarcation at the customer’s premises and may have load coils. 2.8.2.3 UCSL is a copper facility eighteen facilityeighteen thousand (18,000) feet or less in lesins length provided from the cross-cross- box in the field up to and including the includinghte customer’s point of demarcation. If demarcationI.f available, this facility will not have any intervening equipment such as load coils between the customer and the cross-box. 2.8.2.3.1 If Excel AIN/Birch requests a UCSL and it is not available, Excel may AIN/Birchmay request the copper Subloop facility be modified bemodiefid pursuant to the ULM process to remove remvoe load coils and/or excessive and/orexcessive bridged taps. If load coils and/or excessive excesvsei bridged taps are removedremovedh, the te facility will be classified beclassified as a UCSL. 2.8.2.4 USLD-INC is the distribution facility owned or ownedor controlled by BellSouth AT&T inside a building or between buildings on the same property that is not separated by a public street or road. USLD-INC includes the facility from the fromthe cross-connect device in the building buinldgi equipment room up to and including the point of demarcation at the customer’s premises. 2.8.2.4.1 Upon request for USLD-INC from ExcelAIN/Birch, BellSouth will AT&wTill install a cross-connect panel connetcpanel in the building equipment room for the purpose of accessing USLD-INC pairs from a building equipment room. The cross-connect panel will function paneliwll functoi n as a single point of interconnection (SPOI) for USLD-INC and will be accessible by multiple carriers multiplecarriers as space permits. BellSouth will A&TTwill place cross-connect blocks in twenty five (25) pair increments for Excel’s use AIN/Birchu’sse on this cross-connect panelconnecptanel. Excel AIN/Birch will be responsible for connecting its facilities itscfailities to the twenty five (25five2(5) pair cross- cross-connect block(s). 2.8.2.5 For access to Voice Grade USLD and UCSL, Excel AIN/Birch shall install a cable to the BellSouth AT&T cross-box pursuant to the terms and conditions for physical collocation for remote sites set forth in Attachment 4. This cable would be connected by a BellSouth technician within the BellSouth cross-box during the set-up process. Excel’s cable pairs can then be connected to BellSouth’s USL within the BellSouth cross-box by the BellSouth technician. 2.8.2.6 Through the SI process, BellSouth will determine whether access to USLs at the location requested by Excel is technically feasible and whether sufficient capacity exists in the cross-box. If existing capacity is sufficient to meet Excel’s request, then BellSouth will perform the site set-up as described in the CLEC Information Package, located at BellSouth’s Interconnection Web site. 2.8.2.7 The site set-up must be completed before Excel can order Subloop pairs. For the site set-up in a BellSouth cross-connect box in the field, BellSouth will perform the necessary work to splice Excel’s cable into the cross-connect box. For the site set- up inside a building equipment room, BellSouth will perform the necessary work to install the cross-connect panel and the connecting block(s) that will be used to provide access to the requested USLs. 2.8.2.8 Once the site set-up is complete, Excel will request Subloop pairs through submission of a LSR form to the LCSC. OC is required with USL pair provisioning when Excel requests reuse of an existing facility, and the OC charge shall be billed in addition to the USL pair rate. For expedite requests by Excel for Subloop pairs, expedite charges will apply for intervals less than five (5) days. 2.8.2.9 USLs will be provided in accordance with BellSouth’s TR 73600 Unbundled Local Loop Technical Specifications.Attachment

Unbundled Subloop Distribution. 2.8.2.1 The USLD facility is a dedicated transmission facility that BellSouth AT&T provides from a customer’s point of demarcation to a BellSouth an AT&T cross-connect device. The BellSouth AT&T cross-connect device may be located within a remote terminal (RT) or a stand-stand- alone cross-box in the field or in the equipment room of a building. The USLD media is a copper twisted pair that can be provisioned as a 2-wire or 4-wire facility. BellSouth AT&T will make available the following subloop distribution offerings where facilities exist: USLD – Voice Grade (USLD-VG) Unbundled Copper Subloop (UCSL) USLD – Intrabuilding Network Cable (USLD-INC (aka riser cable)) 2.8.2.2 USLD-VG is a copper subloop facility from the cross-box in the field up to and including the point of demarcation at the customer’s premises and may have load coils. 2.8.2.3 UCSL is a copper facility eighteen thousand (18,000) feet or less in length provided from the cross-box in the field up to and including the customer’s point of demarcation. If available, this facility will not have any intervening equipment such as load coils between the customer and the cross-box. 2.8.2.3.1 If Excel BLC Management requests a UCSL and it is not available, Excel BLC Management may request the copper Subloop facility be modified pursuant to the ULM process to remove load coils and/or excessive bridged taps. If load coils and/or excessive bridged taps are removed, the facility will be classified as a UCSL. 2.8.2.4 USLD-INC is the distribution facility owned or controlled by BellSouth AT&T inside a building or between buildings on the same property that is not separated by a public street or road. USLD-INC includes the facility from the cross-connect device in the building equipment room up to and including the point of demarcation at the customer’s premises. 2.8.2.4.1 Upon request for USLD-INC from ExcelBLC Management, BellSouth AT&T will install a cross-cross- connect panel in the building equipment room for the purpose of accessing USLD-USLD- INC pairs from a building equipment room. The cross-connect panel will function as a single point of interconnection (SPOI) for USLD-INC and will be accessible by multiple carriers as space permits. BellSouth AT&T will place cross-connect blocks in twenty five (25) pair increments for ExcelBLC Management’s use on this cross-connect panel. Excel BLC Management will be responsible for connecting its facilities to the twenty five (25) pair cross- cross-connect block(s). 2.8.2.5 For access to Voice Grade USLD and UCSL, Excel BLC Management shall install a cable to the BellSouth AT&T cross-box pursuant to the terms and conditions for physical collocation for remote sites set forth in Attachment 4. This cable would be connected by a BellSouth an AT&T technician within the BellSouth AT&T cross-box during the set-up process. ExcelBLC Management’s cable pairs can then be connected to BellSouthAT&T’s USL within the BellSouth AT&T cross-box by the BellSouth AT&T technician. 2.8.2.6 Through the SI process, BellSouth AT&T will determine whether access to USLs at the location requested by Excel BLC Management is technically feasible and whether sufficient capacity exists in the cross-box. If existing capacity is sufficient to meet ExcelBLC Management’s request, then BellSouth AT&T will perform the site set-up as described in the CLEC Information Package, located at BellSouthAT&T’s Interconnection Web site. 2.8.2.7 The site set-up must be completed before Excel BLC Management can order Subloop pairs. For the site set-up in a BellSouth an AT&T cross-connect box in the field, BellSouth AT&T will perform the necessary work to splice ExcelBLC Management’s cable into the cross-cross- connect box. For the site set- set-up inside a building equipment room, BellSouth AT&T will perform the necessary work to install the cross-connect panel and the connecting block(s) that will be used to provide access to the requested USLs. 2.8.2.8 Once the site set-up is complete, Excel BLC Management will request Subloop pairs through submission of a LSR form to the LCSC. OC is required with USL pair provisioning when Excel BLC Management requests reuse of an existing facility, and the OC charge shall be billed in addition to the USL pair rate. For expedite requests by Excel BLC Management for Subloop pairs, expedite charges will apply for intervals less than five (5) days. 2.8.2.9 USLs will be provided in accordance with BellSouthAT&T’s TR 73600 Unbundled Local Loop Technical Specifications.

Unbundled Subloop Distribution. 2.8.2.1 The USLD facility is a isa dedicated transmission facility transmissionfacility that BellSouth provides AT&Tprovides from a customer’s point of demarcation to a BellSouth an AT&T cross-connect device. The BellSouth AT&T cross-connect device may be located within a remote terminal (RT) or a stand-alone cross-box in the field or in the equipment room of a building. The USLD media is a copper twisted pair that can be provisioned as a 2-wire or 4-wire facility. BellSouth will AT&Twill make available the following subloop distribution followinsgubloop distribuiton offerings where wheer facilities exist: USLD – Voice Grade (USLD-VG) Unbundled Copper Subloop (UCSL) USLD – Intrabuilding Network Cable (USLD-INC (aka riser cable)) 2.8.2.2 USLD-VG is a copper subloop facility from facilitfyrom the cross-box in the field up fiedlup to and including the point of demarcation at the customer’s premises and may have load coils. 2.8.2.3 UCSL is a copper facility eighteen facilityeighteen thousand (18,000) feet or less in lesins length provided from the cross-cross- box in the field up to and including the includinghte customer’s point of demarcation. If demarcationI.f available, this facility will not have any intervening equipment such as load coils between the customer and the cross-box. 2.8.2.3.1 If Excel AFS of GA requests a UCSL and it is not available, Excel AFS of GA may request the copper Subloop facility be modified bemodiefid pursuant to the ULM process to remove remvoe load coils and/or excessive and/orexcessive bridged taps. If load coils and/or excessive excesvsei bridged taps are removedremovedh, the te facility will be classified beclassified as a UCSL. 2.8.2.4 USLD-INC is the distribution facility owned or ownedor controlled by BellSouth AT&T inside a building or between buildings on the same property that is not separated by a public street or road. USLD-INC includes the facility from the fromthe cross-connect device in the building buinldgi equipment room up to and including the point of demarcation at the customer’s premises. 2.8.2.4.1 Upon request for USLD-INC from ExcelAFS of GA, BellSouth will AT&wTill install a cross-connect panel connetcpanel in the building equipment room for the purpose of accessing USLD-INC pairs from a building equipment room. The cross-connect panel will function paneliwll functoi n as a single point of interconnection (SPOI) for USLD-INC and will be accessible by multiple carriers multiplecarriers as space permits. BellSouth will A&TTwill place cross-connect blocks in twenty five (25) pair increments for Excel’s use AFS of GAu’sse on this cross-connect panelconnecptanel. Excel will AFS of GAwill be responsible for connecting its facilities itscfailities to the twenty five (25five2(5) pair cross- cross-connect block(s). 2.8.2.5 For access to Voice Grade USLD and UCSL, Excel AFS of GA shall install a cable to the BellSouth AT&T cross-box pursuant to the terms and conditions for physical collocation for remote sites set forth in Attachment 4. This cable would be connected by a BellSouth technician within the BellSouth cross-box during the set-up process. Excel’s cable pairs can then be connected to BellSouth’s USL within the BellSouth cross-box by the BellSouth technician. 2.8.2.6 Through the SI process, BellSouth will determine whether access to USLs at the location requested by Excel is technically feasible and whether sufficient capacity exists in the cross-box. If existing capacity is sufficient to meet Excel’s request, then BellSouth will perform the site set-up as described in the CLEC Information Package, located at BellSouth’s Interconnection Web site. 2.8.2.7 The site set-up must be completed before Excel can order Subloop pairs. For the site set-up in a BellSouth cross-connect box in the field, BellSouth will perform the necessary work to splice Excel’s cable into the cross-connect box. For the site set- up inside a building equipment room, BellSouth will perform the necessary work to install the cross-connect panel and the connecting block(s) that will be used to provide access to the requested USLs. 2.8.2.8 Once the site set-up is complete, Excel will request Subloop pairs through submission of a LSR form to the LCSC. OC is required with USL pair provisioning when Excel requests reuse of an existing facility, and the OC charge shall be billed in addition to the USL pair rate. For expedite requests by Excel for Subloop pairs, expedite charges will apply for intervals less than five (5) days. 2.8.2.9 USLs will be provided in accordance with BellSouth’s TR 73600 Unbundled Local Loop Technical Specifications.Attachment