Use of the Columbarium Niche Sample Clauses

Use of the Columbarium Niche 
Sample 1Sample 2
AutoNDA by SimpleDocs

Related to Use of the Columbarium Niche

  • SEXUAL EXPLOITATION 18.1 The Contractor shall take all appropriate measures to prevent sexual exploitation or abuse of anyone by it or by any of its employees or any other persons who may be engaged by the Contractor to perform any services under the Contract. For these purposes, sexual activity with any person less than eighteen years of age, regardless of any laws relating to consent, shall constitute the sexual exploitation and abuse of such person. In addition, the Contractor shall refrain from, and shall take all appropriate measures to prohibit its employees or other persons engaged by it from, exchanging any money, goods, services, offers of employment or other things of value, for sexual favors or activities, or from engaging in any sexual activities that are exploitive or degrading to any person. The Contractor acknowledges and agrees that the provisions hereof constitute an essential term of the Contract and that any breach of this representation and warranty shall entitle UNDP to terminate the Contract immediately upon notice to the Contractor, without any liability for termination charges or any other liability of any kind. 18.2 UNDP shall not apply the foregoing standard relating to age in any case in which the Contractor’s personnel or any other person who may be engaged by the Contractor to perform any services under the Contract is married to the person less than the age of eighteen years with whom sexual activity has occurred and in which such marriage is recognized as valid under the laws of the country of citizenship of such Contractor’s personnel or such other person who may be engaged by the Contractor to perform any services under the Contract.

  • Use of the Card 1. The Cardmember must sign the Card in ink, using a ball point pen, as soon as he or she receives it; the Cardmember must also safeguard the Card and preserve any PIN in extreme secrecy and keep it separate from his or her Card. The Cardmember must not use the Card after the expiration of the validity period embossed on it, and not use the Card after it has been damaged, withdrawn or cancelled. 2. Although the Cardmember has the right to use the Card, the Card shall at all times remain the property of AEME. The Cardmember must surrender the Card immediately upon any request by AEME, any Service Establishment or any other representative of AEME, based on AEME's instructions. A Service Establishment or any other representative of AEME may at its discretion, and after instructions by AEME, withdraw, hold and keep the Card on behalf of AEME. 3. The Cardmember is the only person authorized to use the Card for Transactions including Cash Withdrawals, identification or any other purpose. The Cardmember must not allow any other person to use the Card or the PIN. The Cardmember must safeguard the Card from misuse by retaining the Card under his or her personal control at all times. 4. The Card is issued to the Cardmember solely for the purposes of Transactions and Cash Withdrawals on behalf of the Company. 5. If the Cardmember uses the Card to buy goods or services from a Service Establishment on a frequent or recurring basis (e.g. subscription to periodicals, TV channels, and the like) ("Recurring Charges") or if the Cardmember uses the Card to buy goods or services on installments or on a premium basis (e.g. insurance) the Cardmember authorizes AEME to pay all such Recurring Charges or periodical premiums or installments on his or her behalf at the request of the Service Establishment, and the Company undertakes to repay AEME accordingly. The Cardmember must inform the Service Establishment and AEME in writing if the Cardmember wishes to stop any such periodical payments. AEME shall not be responsible for any breach, cancellation or termination of any legal arrangement or relationship (e.g. insurance policy) resulting from AEME's inability to pay the said Charges because the Cardmember's Account is in overdue status. AEME shall not be liable for any damages of any nature if AEME fails to pay or delays the payment of any Charges, installments or premiums because of any technical failure, error or for any reason beyond AEME's reasonable control. 6. Owners of Service Establishments who are Cardmembers are not allowed to use their Cards in their own Service Establishments. The Cardmember is not allowed to utilize the Card to fund any part of, or to meet the working capital requirements of his or her business. 7. The Company is solely liable for all amounts due on the Account and for all Charges incurred on the Card issued to the Cardmember. 8. The Cardmember is not entitled to use the Card to withdraw or extract cash in Service Establishments, and shall only use the Card to purchase goods or services. 9. The Cardmember shall not use the Card as payment for any illegal or unlawful purchases or services and is responsible for any use that is in violation of any local or other laws and regulations. The Cardmember further agrees to indemnify AEME for any action whatsoever that may arise as a result of such Transactions. 10. The Cardmember expressly authorizes AEME to use the information provided by the Cardmember for AEME's targeted promotional activities including without limitation, promotional activities conducted in conjunction with third parties selected by AEME, for third party researches and surveys, in accordance with the limitations of the applicable laws. 11. The Cardmember agrees to follow the Card activation procedures laid down by AEME from time to time and shall also be subject to any identity checks and verifications by AEME and or any third parties (e.g. credit bureaus, government agencies, Service Establishments, etc). 12. All Charges will be debited to the Account in the billing currency (i.e. USD). Any Transactions that are effected in currencies other than the billing currency will be debited to the Account after conversion as set forth in Clause 4.

  • Use of Products 3.28.1 In the performance of this contract, Consultant shall make maximum use of products containing recovered materials that are EPA-designated items unless the product cannot be acquired (i) competitively within a timeframe providing for compliance with the contract performance schedule; (ii) meeting contract performance requirements; or (iii) at a reasonable price. 3.28.2 Consultant shall abide by the list of EPA-designated items available on EPA’s Comprehensive Procurement Guidelines web site: xxxxx://xxx.xxx.xxx/smm/comprehensive-procurement-guideline-cpg-program.

  • SHOP DRAWINGS, PRODUCT DATA AND SAMPLES 4.12.1 Shop Drawings are drawings, diagrams, schedules and other, data specially prepared for the Work by the Contractor or any Subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work. 4.12.2 Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate a material, product or system for some portion of the Work. 4.12.3 Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged. 4.12.4 The Contractor shall review, approve and submit, with reasonable promptness and in such sequence as to cause no delay in the Work or in the work of the State or any separate contractor, all Shop Drawings, Product Data and Samples required by the Contract Documents. 4.12.5 By approving and submitting Shop Drawings, Product Data and Samples, the Contractor represents that he / she has determined and verified all materials, field measurements, and field construction criteria related thereto, or will do so, and that he / she has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents. 4.12.6 The Contractor shall not be relieved of responsibility for any deviation from the requirements of the Contract Documents by the Architect's approval of Shop Drawings, Product Data or Samples under Subparagraph 2.2.7 of these General Conditions unless the Contractor has specifically informed the Architect and the State in writing of such deviation at the time of sub- mission and the Architect and the State has given written approval to the specific deviation. The Contractor shall not be relieved from responsibility for errors or omissions in the Shop Drawings, Product Data or Samples by the Architect's approval thereof. 4.12.7 The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, Product Data or Samples, to revisions other than those requested by the Architect on previous submittals. 4.12.8 No portion of the Work requiring submission of a Shop Drawing, Product Data or Sample shall be commenced until the submittal has been approved by the Architect as provided in Subparagraph 2.2.7 of these General Conditions. All such portions of the Work shall be in accordance with approved submittals.

  • Manufacture 2.1. The LED(s) on the LED module shall be equipped with suitable fixation elements. 2.2. The fixation elements shall be strong and firmly secured to the LED(s) and the LED module.

  • DEVELOPMENT OR ASSISTANCE IN DEVELOPMENT OF SPECIFICATIONS REQUIREMENTS/ STATEMENTS OF WORK

  • PRICE LISTS AND PRODUCT INFORMATION Contractors should provide an electronic version of the proposed price list in an Excel format or pdf on a jump drive. Also provide a dealer list, if applicable in an Excel format with "read and write" capabilities on the same jump drive. No costs or expenses associated with providing this information in the required format shall be charged to the State of Arkansas. At the time of contract renewal contractor will furnish OSP with an updated dealer list and published price list.

  • Reactive Power and Primary Frequency Response 9.6.1 Power Factor Design Criteria

  • PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!