Common use of Vehicle type Clause in Contracts

Vehicle type. 3.1.1. The application for approval of a vehicle type with regard to the installation of its safety-belts and restraint systems shall be submitted by the vehicle manufacturer or by his duly accredited representative. 3.1.2. It shall be accompanied by the under mentioned documents in triplicate and the following particulars: 3.1.2.1. Drawings of the general vehicle structure on an appropriate scale, showing the positions of the safety-belts, and detailed drawings of the safety-belts and of the points to which they are attached; 3.1.2.2. A specification of the materials used which may affect the strength of the safety-belts; 3.1.2.3. A technical description of the safety-belts; 3.1.2.4. In the case of safety-belts affixed to the seat structure; 3.1.2.5. Detailed description of the vehicle type with regard to the design of the seats, of the seat anchorages and their adjustment and locking systems; 3.1.2.6. Drawings, on an appropriate scale and in sufficient detail, of the seats, of their anchorages to the vehicle, and of their adjustment and locking systems. 3.1.3. At the opinion of the manufacturer, a vehicle representative of the vehicle type to be approved or the parts of the vehicle considered essential for the safety-belt tests by the Technical Service conducting approval tests shall be submitted to the Service.

Vehicle type. 3.1.1. The application for approval of a vehicle type with regard to the installation of its safety-belts and restraint systems shall be submitted by the vehicle manufacturer or by his duly accredited representative. 3.1.2. It shall be accompanied by the under mentioned undermentioned documents in triplicate and the following particulars: 3.1.2.1. Drawings of the general vehicle structure on an appropriate scale, showing the positions of the safety-belts, and detailed drawings of the safety-belts and of the points to which they are attached; 3.1.2.2. A specification of the materials used which may affect the strength of the safety-belts; 3.1.2.3. A technical description of the safety-belts; 3.1.2.4. In the case of safety-belts affixed to the seat structure; 3.1.2.5. Detailed description of the vehicle type with regard to the design of the seats, of the seat anchorages and their adjustment and locking systems; 3.1.2.6. Drawings, on an appropriate scale and in sufficient detail, of the seats, of their anchorages to the vehicle, and of their adjustment and locking systems.; 3.1.3. At the opinion of the manufacturer, a vehicle representative of the vehicle type to be approved or the parts of the vehicle considered essential for the safety-belt tests by the Technical Service conducting approval tests shall be submitted to the Serviceservice.

Vehicle type. 3.1.1. The application for approval of a vehicle type with regard to the installation of its safety-belts and restraint systems shall be submitted by the vehicle manufacturer or by his duly accredited representative. 3.1.2. It shall be accompanied by the under mentioned documents in triplicate and the following particulars: 3.1.2.1. Drawings of the general vehicle structure on an appropriate scale, showing the positions of the safety-belts, and detailed drawings of the safety-belts and of the points to which they are attached; 3.1.2.2. A specification of the materials used which may affect the strength of the safety-belts; 3.1.2.3. A technical description of the safety-belts; 3.1.2.4. In the case of safety-belts affixed to the seat structure; 3.1.2.5. Detailed description of the vehicle type with regard to the design of the seats, of the seat anchorages and their adjustment and locking systems; 3.1.2.6. Drawings, on an appropriate scale and in sufficient detail, of the seats, of their anchorages to the vehicle, and of their adjustment and locking systems. 3.1.3. At the opinion of the manufacturer, a vehicle representative of the vehicle type to be approved or the parts of the vehicle considered essential for the safety-safety- belt tests by the Technical Service conducting approval tests shall be submitted to the Service.

Vehicle type. 3.1.1. The application for approval of a vehicle type with regard to the installation of its safety-belts and restraint systems shall be submitted by the vehicle manufacturer or by his duly accredited representative. 3.1.2. It shall be accompanied by the under mentioned undermentioned documents in triplicate and the following particulars: 3.1.2.1. Drawings of the general vehicle structure on an appropriate scale, showing the positions of the safety-belts, and detailed drawings of the safety-belts and of the points to which they are attached; 3.1.2.2. A specification of the materials used which may affect the strength of the safety-belts; 3.1.2.3. A technical description of the safety-belts; 3.1.2.4. In the case of safety-belts affixed to the seat structure; 3.1.2.5. Detailed description of the vehicle type with regard to the design of the seats, of the seat anchorages and their adjustment and locking systems; 3.1.2.6. Drawings, on an appropriate scale and in sufficient detail, of the seats, of their anchorages to the vehicle, and of their adjustment and locking systems.; 3.1.3. At the opinion of the manufacturer, a vehicle representative of the vehicle type to be approved or the parts of the vehicle considered essential for the safety-belt tests by the Technical Service technical service conducting approval tests shall be submitted to the Serviceservice.

Vehicle type. 3.1.1. The application for approval of a vehicle type with regard to the installation of its safety-belts and restraint systems shall be submitted by the vehicle manufacturer or by his duly accredited representative. 3.1.2. It shall be accompanied by the under mentioned documents in triplicate and the following particulars: 3.1.2.1. Drawings of the general vehicle structure on an appropriate scale, showing the positions of the safety-belts, and detailed drawings of the safety-belts and of the points to which they are attached; 3.1.2.2. A specification of the materials used which may affect the strength of the safety-belts; 3.1.2.3. A technical description of the safety-belts; 3.1.2.4. In the case of safety-belts affixed to the seat structure; 3.1.2.5. Detailed description of the vehicle type with regard to the design of the seats, of the seat anchorages and their adjustment and locking systems; 3.1.2.6. Drawings, on an appropriate scale and in sufficient detail, of the seats, of their anchorages to the vehicle, and of their adjustment and locking systems.; For Public Comment Only 3.1.3. At the opinion of the manufacturer, a vehicle representative of the vehicle type to be approved or the parts of the vehicle considered essential for the safety-belt tests by the Technical Service conducting approval tests shall be submitted to the Service.

Vehicle type. 3.1.1. The application for approval of a vehicle type with regard to the installation of its safety-belts and restraint systems shall be submitted by the vehicle manufacturer or by his duly accredited representative. 3.1.2. It shall be accompanied by the under mentioned documents in triplicate and the following particulars: 3.1.2.1. Drawings of the general vehicle structure on an appropriate scale, showing the positions of the safety-belts, and detailed drawings of the safety-belts and of the points to which they are attached; 3.1.2.2. A specification of the materials used which may affect the strength of the safety-belts; 3.1.2.3. A technical description of the safety-belts; 3.1.2.4. In the case of safety-belts affixed to the seat structure; 3.1.2.5. Detailed description of the vehicle type with regard to the design of the seats, of the seat anchorages and their adjustment and locking systems; 3.1.2.6. Drawings, on an appropriate scale and in sufficient detail, of the seats, of their anchorages to the vehicle, and of their adjustment and locking systems.; 3.1.3. At the opinion of the manufacturer, a vehicle representative of the vehicle type to be approved or the parts of the vehicle considered essential for the safety-belt tests by the Technical Service conducting approval tests shall be submitted to the Service.

Vehicle type. 3.1.1. The application for approval of a vehicle type with regard to the installation of its safety-belts and restraint systems shall be submitted by the vehicle manufacturer or by his duly accredited representative. 3.1.2. It shall be accompanied by the under mentioned undermentioned documents in triplicate and the following particulars: 3.1.2.1. Drawings of the general vehicle structure on an appropriate scale, showing the positions of the safety-belts, and detailed drawings of the safety-belts and of the points to which they are attached; 3.1.2.2. A specification of the materials used which may affect the strength of the safety-safety- belts; 3.1.2.3. A technical description of the safety-belts; 3.1.2.4. In the case of safety-belts affixed to the seat structure; 3.1.2.5. Detailed description of the vehicle type with regard to the design of the seats, of the seat anchorages and their adjustment and locking systems; 3.1.2.6. Drawings, on an appropriate scale and in sufficient detail, of the seats, of their anchorages to the vehicle, and of their adjustment and locking systems.; 3.1.3. At the opinion of the manufacturer, a vehicle representative of the vehicle type to be approved or the parts of the vehicle considered essential for the safety-belt tests by the Technical Service technical service conducting approval tests shall be submitted to the Serviceservice.