Worker Safety Plan Sample Clauses

Worker Safety Plan. The shop and field contractors shall develop and implement a worker safety plan for the protection of all shop and field workers. 1. The plan must comply with NYSDOT Section 107-05 and all associated Special Notes. 2. Address the protection of workers from all project hazards including but not limited to fall protection, confined space (if applicable), hearing and eye protection, and exposure to hazardous materials or conditions. 3. For field work, include provisions for the inspection and removal of pigeon droppings in accordance with NYSDOT Safety Bulletin SB-94-4. 4. Lockout/Tagout Plan – Provide the procedures in accordance with 29 CFR 1910.147 and 1910.333 that will be followed for lockout/tagout of existing electrical utilities within containment or other work areas as appropriate. Include provisions for coordinating lock-out/tag-out activities with NYCDOT and the Utilities. 5. Fire Protection and Prevention, and Emergency Response – Provide procedures in accordance with the requirements of 29 CFR 1926.24 and 1926.150 for the control, storage and handling of flammable and combustible materials, including a site-specific Emergency Response Plan in accordance with the requirements of 1926.65(q) at a minimum. 6. Electrical Safety – Provide procedures in accordance with 29 CFR 1926.400, 1926.403, and all applicable provisions of 29 CFR 1926, Subpart K. 7. Include as part of the plan, or in a separate submittal, a binder containing MSDS for all materials that will be used on the Project site. If all MSDS are not available at the pre-construction stage, provide the MSDS before using the product on site. CONTRACT NO. MBPM20 8. A separate worker protection plan addressing exposures to lead and other toxic metals is addressed under Section 832.