EXHIBIT 10.28
*** PORTIONS OF THIS EXHIBIT HAVE BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT. THE CONFIDENTIAL PORTIONS HAVE BEEN FILED SEPARATELY
WITH THE SECURITIES AND EXCHANGE COMMISSION.
TECHNOLOGY LICENSE AGREEMENT
----------------------------
This Technology License Agreement ("Agreement") is made on this 29th day of
June, 2000 ("Effective Date") by and between POWER INTEGRATIONS, INC., a
corporation duly organized and existing under the laws of the State of Delaware,
U.S.A., having its principal place of business at 000 Xxxxx Xxxxxxxx Xxxxxx,
Xxxxxxxxx, Xxxxxxxxxx 00000 ("PI"), and
MATSUSHITA ELECTRONICS CORPORATION, a corporation duly organized and
existing under the laws of Japan, by and through its Semiconductor Company
having its principal place of business at 0 Xxxxxxxxxxxxxxx, Xxxxxxxxxx, Xxxxx,
Xxxxx ("MEC").
RECITALS
--------
A. PI is the owner and developer of certain integrated circuit process
technologies required to manufacture high voltage integrated circuits.
B. PI has no wafer fabrication facility and desires to obtain a cost
competitive foundry to manufacture wafers for PI, in order to provide a source
for the wafers PI requires, and to assure a long term supply of wafers.
C. MEC has wafer fabrication facilities in Japan and elsewhere and
desires full utilization and efficient operation of its wafer fabrication
facilities.
D. MEC and PI desire to enhance the types of product available for sale
by each of them through complementary and cooperative product development
activity.
E. PI and MEC desire that PI license MEC to manufacture wafers for
certain integrated circuits, designed by either PI or MEC, using PI process
technology, for sale to PI and for sale by MEC as finished products in certain
geographic markets on the terms set forth in this Agreement.
AGREEMENT
---------
PI and MEC, intending to be legally bound, hereby agree as follows:
ARTICLE I
---------
DEFINITIONS
-----------
For the purposes of this Agreement, the following terms shall have the
following meanings:
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
1
1.1 "Asian Territory" means the People's Republic of China, Republic of
Korea, Democratic People's Republic of Korea, Republic of China, Hong Kong,
Mongolia, Philippines, Maldives, Malaysia, Singapore, Indonesia, Thailand,
Vietnam, Laos, Xxxx, Myanmar (Burma), Nepal, Bhutan, India, Pakistan,
Afghanistan, Bangladesh, Srilanka, Brunei, and former Soviet Union.
1.2 "Asian Company" means a corporation organized and existing under the
laws of any country in the Asian Territory and operating in such country.
1.3 "Baseline Process" means (a) the specific n-channel power technology
(nominally 400V) of PI and (b) extensions of the foregoing to higher voltages,
that is more fully described in Appendix A attached to this Agreement, and does
not include PI's p-channel process technology and (c) PI's technology, developed
during the term of the Agreement, necessary to manufacture high voltage n-
channel devices with MOS structure including, but not limited to, MOSFET, IGBT
and MCT. Reference to the Baseline Process covers the process, manufacturing
method and device structures relevant to (a), (b) and (c) above.
1.4 "Confidential Information" means information relating to the subject
matter of this Agreement which is regarded as confidential or proprietary by one
party or the other; information received as a consequence of the rendering or
receiving of technical assistance under this Agreement and/or the Prior License
Agreement; information transferred during meetings between the parties relating
to this Agreement and/or the Prior License Agreement which is owned or
controlled by either party and which relates to its past, present or future
activities with respect to the subject matter of this Agreement if such
information is disclosed by one of the parties to the other party in written,
graphic, model or other tangible form or in the form of a computer program or in
a machine readable medium or any derivation thereof and is designated in writing
as confidential by an appropriate legend, together with the name of the party so
disclosing it, or, if such information is disclosed orally, which is identified
at the time of oral disclosure as confidential and which is reduced to written,
graphic, model, or other tangible form, marked as confidential and delivered by
the disclosing party within thirty (30) days after such oral disclosure.
1.5 "Japanese Company" means a corporation organized and existing under
the laws of Japan and operating in Japan, other than a Subsidiary of a
corporation organized and existing under the laws of any other country.
1.6 "Mask Work" and "Semiconductor Chip Product" are defined as those
terms are defined in Section 901 of the Semiconductor Chip Xxxxxxxxxx Xxx, Xxxxx
00, Xxxxxx Xxxxxx Code.
1.7 "Matsushita Group" means MEC, MEI and their respective wholly owned
subsidiaries and their respective subsidiaries in which MEC or MEI owns,
directly or indirectly, more than fifty percent (50%) of the stock interest, or
the maximum percentage of the stock interest that a foreign investor may own, if
equal to or less than fifty percent (50%), pursuant to local laws and
regulations of any country, as of the Effective Date. (Further, from time to
time during the term of the Agreement, the definition of "Matsushita Group"
shall be extended to include certain corporations or entities, based upon the
request of MEC and the written approval by PI.) It is explicitly understood by
the parties that Matsushita Electric Works ("MEW") and all of its subsidiaries,
in which MEW owns, directly or indirectly, more than fifty percent (50%) of the
stock interest, or the maximum percentage of the stock interest that a foreign
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
2
investor may own, if equal to or less than fifty percent (50%), pursuant to
local laws and regulations of any country, as of the Effective Date, shall be
included in the definition of "Matsushita Group".
1.8 "MEC Product" means any and every Semiconductor Chip Product designed
and released to production by MEC prior to and during the term of this
Agreement, incorporating or utilizing at least one of (i) the Baseline Process;
(ii) any Update to the Baseline Process made by PI or MEC; and (iii) any PI
Patents; provided, however, that any MEC derivative of a PI Product will be
deemed to be a MEC Product only if it is "substantially different in
functionality" (as defined below) from the PI Product from which it was derived.
1.9 "PI Product" means any and every Semiconductor Chip Product designed
and released to production by PI prior to and during the term of this Agreement,
utilizing at least one of (i) the Baseline Process; (ii) any Update to the
Baseline Process made by PI or MEC; and (iii) any PI Patents; provided, however,
that any PI derivative of a MEC Product will be deemed to be a PI Product only
if it is "substantially different in functionality" (as defined below) from the
MEC Product from which it was derived.
1.10 "Substantially different in functionality" means that at least 50% of
the functional blocks of the derivative circuit are different from the
functional blocks of the circuit (the "original circuit") from which the
derivative circuit is derived; provided, however, that derivative circuits with
only some or all of the following changes will be deemed not to be substantially
different in functionality from the original circuits from which they were
derived: changes in values of data sheet parameters such as breakdown voltage,
RDSON, minimum pulsewidth, dynamic current range, frequency, and current limit;
the addition or deletion of features such as latched shutdown and auto restart;
and/or making parameters such as frequency or current limit externally
programmable.
1.11 "Product" without further qualification means, collectively, PI
Product and/or MEC Product.
1.12 "Restricted Product" means any Product covered by the Restricted
Patents.
1.13 "Net Sales" shall have the meaning provided in Section 5.3 below.
1.14 (a) "Patents" means letters patent, utility models, rights and
privileges to or under letters patent and utility models in existence prior to
the expiration or earlier termination of this Agreement, to the extent they
relate to the Baseline Process or the design or manufacture of Products made on
the Baseline Process or any Updates to the Baseline Process. "Patents" also
means such letters patent, utility models, rights and privileges to or under
letters patent and utility models that come into existence after the expiration
or earlier termination of this Agreement if the same (i) issue on patent
applications filed before the expiration or earlier termination of this
Agreement, (ii) cover a PI Product (if such letters patent or utility model is
owned by MEC) or cover an MEC Product (if such letters patent or utility model
is owned by PI) and, (iii) such PI Product or MEC Product, as the case may be,
incorporates or is made using Baseline Process Confidential Information
disclosed under this Agreement.
(b) "PI's Patents" means Patents owned or controlled by PI during the
term of this
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
3
Agreement, with respect to which and to the extent to which, and subject to the
conditions under which, PI shall have the right to grant licenses, rights and
privileges to licensees during the term of this Agreement; it does not include,
however, Patents with respect to which a license cannot be granted excepting
pursuant to an agreement which requires the payment to a third party of
royalties or other consideration measured by the use made of such Patents,
unless MEC requests licenses under such Patents and agrees in writing to assume
its fair share of such royalties or other consideration. PI represents and
warrants that a list of all PI's Patents as of the date of this Agreement is set
forth in Appendix B attached hereto.
(c) "Restricted Patents" means all PI Patents relating to
Semiconductor circuit design or system level architectures issued or first
applied for after January 1, 1994, other than PI Patents relating solely to the
Baseline Process and Updates to the Baseline Process such as improvements to
high voltage device structures and improvements to semiconductor processing.
(d) "MEC's Patents" means Patents owned or controlled by MEC during
the term of this Agreement, with respect to which and to the extent to which,
and subject to the conditions under which, MEC shall have the right to grant
licenses, rights and privileges to licensees during the term of this Agreement;
it does not include, however, Patents with respect to which a license cannot be
granted excepting pursuant to an agreement which requires the payment to a third
party of royalties or other consideration measured by the use made of such
Patents, unless PI requests licenses under such Patents and agrees in writing to
assume its fair share of such royalties or other consideration. MEC represents
and warrants that a list of all MEC's Patents as of the date of this Agreement
is set forth in Appendix C attached hereto.
1.15 "Subsidiary" of a company means a corporation or other legal entity
(i) the majority of whose shares or other securities entitled to vote for
election of directors (or other managing authority) is now or hereafter
controlled by such company either directly or indirectly; or (ii) which does not
have outstanding shares or securities but the majority of whose ownership
interest representing the right to manage such corporation or other legal entity
is now or hereafter owned and controlled by such company either directly or
indirectly; but any such corporation or other legal entity shall be deemed to be
a Subsidiary of such company only as long as such control or ownership and
control exists.
1.16 "Update" shall mean:
(a) with respect to a Product, a modification or addition made during
the term of this Agreement to effect a cost improvement or to correct the design
or to improve the specific Product to meet the specifications of such Product
or, if no specifications are set forth, to meet data sheet specifications; and
(b) with respect to the Baseline Process, any modification or change,
during the term of this Agreement, to the Baseline Process, as defined in
Section 1.3 of this Agreement, which improves or increases the efficiency, speed
or yield of the Baseline Process.
Both parties hereby understand that the Updates shall include any and all
modifications or changes to materials covered by copyrights and to Mask Works,
in connection with the Products or Baseline
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
4
Process.
1.17 "Wafers" means silicon wafers for Products.
1.18 "Work" means all works of authorship as defined in Sections 101, 102
and 103 of the Copyright Act, Xxxxx 00, Xxxxxx Xxxxxx Code.
1.19 "Prior License Agreement" means that Technology License Agreement
entered into between MEC and PI, effective as of June 29, 1990, as amended on
June 29, 1995 and as again amended on April 1, 1997.
1.20 "Foundry Agreement" means the Wafer Foundry Agreement signed by the
parties on the same date this Agreement is signed.
1.21 MEI means MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD., a corporation
that owns over fifty percent (50%) of the voting stock of MEC and is duly
organized under the laws of Japan, having its principal place of business at
Twin 21 National Tower, 1-61 Shiromi 0 Xxxxx, Xxxx-xx, Xxxxx 000-0000 Xxxxx.
ARTICLE II
----------
TRANSFER OF INFORMATION
-----------------------
2.1 Information Transfer. MEC and PI shall disclose and provide to each
--------------------
other any and all available and unrestricted information reasonably necessary in
order for the other party to obtain the full benefit of the licenses granted
hereunder.
2.2 Update Information Transfer. During the term of this Agreement, each
---------------------------
party shall disclose and provide to the other any Updates which it develops
regarding a Product or the Baseline Process as soon as practical but not longer
than (2) months after the Update has been qualified for production.
2.3 Documentation. Documentation furnished hereunder by MEC and PI has
-------------
been, or will be, prepared and compiled with reasonable care. The liability of
the party providing documentation is limited to replacing such documentation,
free from the error or deficiency in question, with reasonable promptness after
notice thereof from the receiving party, at no additional charge to the
receiving party.
2.4 Periodic Exchange of Information. Both parties hereby agree that they
--------------------------------
will have periodic meetings for the exchange of information by and between the
parties' technical representatives with respect to the current and future
product development and application which either party is separately performing
in the field of the Product and Baseline Process. In addition, PI will permit
one employee of MEC to remain onsite at PI's principal facility in Sunnyvale,
California on a full time basis or such other basis as MEC desires and will
provide such MEC employee with office furniture and fixtures, access to
designated PI photocopiers and fax machines and telephone services. All costs
and expenses of such employee, including the salary of such employee and all
telephone toll charges while in the PI facility, will be borne by MEC.
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
5
The parties hereby confirm that any information transferred even by the
informal meetings and other communications by and between the parties' technical
representatives shall fall within the scope of the Confidential Information in
the event such information satisfies the definition thereof as contemplated in
Section 1.4.
ARTICLE III
-----------
CONFIDENTIAL INFORMATION
------------------------
3.1 Confidentiality Obligation. Each party agrees that the Confidential
--------------------------
Information of the other party which it receives pursuant to this Agreement or
the Prior License Agreement is received only for its own use and only to the
extent provided in this Agreement and the Prior License Agreement, respectively.
Each party agrees to keep such Confidential Information that is (a) technical
information relating to the Baseline Process and its Updates, and (b) primarily
useful in design or manufacture of Products, confidential for a period extending
for twenty (20) years after the expiration of this Agreement; and to keep all
other Confidential Information confidential for a period extending for ten (10)
years after the expiration of this Agreement.
3.2 Third Party Services. Either party may disclose Confidential
--------------------
Information of the other party to one or more third parties for the sole purpose
and to the extent reasonably necessary to have such third parties provide the
disclosing party with foundry, assembly and testing services relating to
Semiconductor Chip Products in accordance with the terms of the licenses set
forth in Sections 4.1 and 4.2; provided that such disclosures shall be made
under written terms and conditions which protect the confidentiality of the
disclosed information upon the terms, and for a period, not less restrictive
than those contained in this Agreement.
3.3 Confidentiality Exception. Notwithstanding the provisions of Section
-------------------------
3.1, nothing received by the parties hereunder shall be construed as
Confidential Information which prior hereto, or during the term of this
Agreement, is:
(a) published or otherwise made available to the public other than by
a breach of this Agreement by such party hereto, or
(b) rightfully received by one party hereto from an independent third
party without restrictions on disclosure, or
(c) approved in writing for release by the party designating the
information as Confidential Information, or
(d) except as otherwise provided in Section 3.5 below, known to or
independently developed by the party receiving the Confidential Information
without reference to such Confidential Information, or
(e) disclosed within a patent application, the subject matter of which
patent application belongs to the receiving party and only with the prior
written approval of the disclosing party.
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
6
In the case that the receiving party intends to disclose Confidential
Information under the exceptions (a), (b), or (d) above, the receiving party
must first give the disclosing party notice (30) thirty days prior to such a
disclosure.
3.4 Other Disclosure. Neither party shall be liable for disclosure of any
----------------
Confidential Information if such disclosure is:
(a) In response to a valid order of a court or other government body
or any political subdivision thereof; provided, however, that the receiving
party shall first immediately notify the other party of such order so as to
allow the other party sufficient time to oppose the order and to seek to obtain
a protective order requiring that the Confidential Information so disclosed be
used only for the purpose for which such protective order is issued; or
(b) otherwise required by law.
3.5 Information Already Known. If a party receives information that the
-------------------------
disclosing party is treating as Confidential Information and which is already
known to the receiving party, such information shall nonetheless be Confidential
Information for the purposes of this Agreement unless the receiving party
demonstrates by reasonable evidence within a reasonable time after the
information is disclosed that such information was already known to it before it
was disclosed by the disclosing party.
ARTICLE IV
----------
RIGHTS AND LICENSES
-------------------
4.1 PI Licenses.
-----------
(a) Subject to all the terms and conditions of this Agreement, PI
hereby grants to MEC, for the term of this Agreement, a nontransferable, non-
assignable right and license to use PI's Confidential Information transferred
hereunder or under the Prior License Agreement relating to Products, the
Baseline Process and Updates, including all such information designated as
proprietary or confidential:
(i) to design MEC Products;
(ii) to improve and make derivatives of PI Products;
(iii) to make Wafers and Products at manufacturing facilities of
MEC or MEC's Subsidiaries;
(iv) to have Wafers and/or Products manufactured, assembled or
tested solely for MEC, provided that
(1) the right granted in this Section 4.1(a)(iv) shall not
broaden the scope of any license granted to MEC under
this Agreement,
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
7
(2) PI gives its written approval in advance for any such
manufacture, assembly or test, which approval shall
not be unreasonably withheld,
(3) MEC shall pay, for such Wafers and Products, the
royalty due under this Agreement for Wafers and
Products, respectively,
(4) the party performing such manufacture, assembly or
test agrees in writing to all terms and conditions of
this Agreement relating to intellectual property
rights and licenses, and territorial and Restricted
Product restrictions, and;
(5) MEC shall be the insurer and guarantor of such party's
full observance of such terms and conditions;
(v) to use, sell, lease or otherwise dispose of:
(1) Products to the Matsushita Group worldwide;
(2) Products to any and all companies established or to be
established under the laws of Japan;
(3) Products to any and all Subsidiaries of Japanese
Companies in the Asian Territory;
(4) Products other than Restricted Products to Asian
Companies in the Asian Territory; and
(vi) to sell Wafers and Products to PI.
This license will be exclusive to the extent provided in Section 4.1(e)
below; otherwise it is nonexclusive.
(b) Subject to all the terms and conditions of this Agreement, PI
hereby grants to MEC, for the term of this Agreement, a nontransferable, non-
assignable, indivisible right and license under the PI Patents:
(i) to design MEC Products;
(ii) to improve and make derivatives of PI Products;
(iii) make Wafers and Products at manufacturing facilities of MEC
or MEC's Subsidiaries;
(iv) to have Wafers and/or Products manufactured, assembled or
tested solely for MEC, provided that
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
8
(1) the right granted in this Section 4.1(b)(iv) shall not
broaden the scope of any license granted to MEC under this
Agreement,
(2) PI gives its written approval in advance of any such
manufacture, assembly or test, which approval shall not be
unreasonably withheld,
(3) MEC shall pay, for such Wafers and Products, the royalty
due under this Agreement for Wafers and Products,
respectively,
(4) the party performing such manufacture, assembly or test
agrees in writing to all terms and conditions of this
Agreement relating to intellectual property rights and
licenses, and territorial and Restricted Product
restrictions, and;
(5) MEC shall be the insurer and guarantor of such party's full
observance of such terms and conditions;
(v) to use, sell, lease or otherwise dispose of:
(1) Products to the Matsushita Group worldwide;
(2) Products to any and all companies established or to be
established under the laws of Japan;
(3) Products to any and all Subsidiaries of Japanese Companies
in the Asian Territory;
(4) Products other than Restricted Products to Asian Companies
in the Asian Territory; and
(vi) to sell Wafers and Products to PI.
This license will be exclusive to the extent provided in Section 4.1(e)
below; otherwise it is nonexclusive.
(c) MEC will not sell, lease or otherwise dispose of Products to any
companies established under the laws of countries other than Japan, whether
through the international procurement offices of such companies or otherwise
unless, for Products other than Restricted Products, MEC:
(i) is advised by the customer that; and
(ii) has a reasonable basis to believe that , and
(iii) does actually believe that
the final destination of such Products is an Asian Company in the Asian
Territory.
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
9
(d) Notwithstanding anything to the contrary contained herein, in
case Japanese Companies wish to procure Products from MEC outside the
territories where MEC is allowed to sell Products under this Agreement and PI is
unable to satisfy such customer's Product quality and volume requirements, both
parties shall negotiate the terms and conditions under which MEC shall be
entitled to supply Products other than Restricted Products to such customers.
(e) During the term of this Agreement PI will not grant to any
companies established or to be established under the laws of Japan and any
Subsidiaries of Japanese Companies worldwide, other than MEC, a whole or any
part of the rights and licenses which MEC is granted hereunder, including, but
not limited to, the right to use the Baseline Process, except to provide for
production wafers, parts or other services solely for PI. Should MEC fail to
comply with the terms of this Agreement in any material respect, PI will be
entitled, subject to advance written notice to MEC and consultation with MEC, in
case such failure should not be cured within sixty (60) days after PI's written
notice, to grant any such rights and licenses to other companies established or
to be established under the laws of Japan, without any infringement of MEC's
proprietary rights.
(f) MEC shall not have the right to sell, lease or otherwise dispose
of Wafers or Products as die, wafers or packaged units for purposes of resale by
any third party as Semiconductor Chip Products under any third party's own brand
label or marking.
(g) MEC and any other licensees under this Agreement shall not have
any rights under this Agreement or the licenses granted herein to use any
Confidential Information of PI or Updates of PI delivered to MEC on or after
June 29, 1995, or any PI Patents first owned or controlled by PI on or after
June 29, 1995, to design, develop, manufacture, use, sell, lease or otherwise
dispose of any products for any application for energizing light.
(h) Although MEC's Subsidiaries are not otherwise granted licenses
under this Agreement, any MEC Subsidiary outside Japan that has manufactured or
assembled Products as permitted by this Section 4.1 may make, sell, lease or
otherwise dispose of such Products to the same extent MEC is licensed to do so
under Sections 4.1 and 4.3 of this Agreement. MEC shall assure that each MEC
Subsidiary that makes, sells, leases or otherwise disposes of Products pursuant
to this Section 4.1(h) does so in compliance with all applicable provisions of
this Agreement. MEC shall be responsible for any noncompliance by any MEC
Subsidiary to the same extent as if MEC itself were not in compliance.
4.2 MEC License.
-----------
(a) Subject to all the terms and conditions of this Agreement, MEC
hereby grants to PI a perpetual, paid-up, worldwide, nonexclusive, non-
assignable (except as otherwise provided in Section 9.4 below), nontransferable
right and license to use MEC's Confidential Information transferred hereunder or
under the Prior License Agreement relating to Products, the Baseline Process,
and Updates, including all such information designated as proprietary or
confidential, to design, make and have made Products, other than MEC Products,
and to use, sell, lease or otherwise dispose of such Products.
(b) Subject to all the terms and conditions of this Agreement, MEC
hereby grants to PI a perpetual, paid-up, worldwide, nonexclusive, non-
assignable (except as otherwise provided in Section 9.4
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
10
below), nontransferable, indivisible right and license under the MEC Patents to
make, have made, use, sell, lease or otherwise dispose of Products, other than
MEC Products.
(c) Subject to all of the terms and conditions of this Agreement, MEC
hereby grants to PI, for the term of this Agreement, a worldwide, nonexclusive,
non-assignable (except as otherwise provided in Section 9.4 below),
nontransferable right and license to use MEC's Confidential Information
transferred hereunder or under the Prior License Agreement relating to Products,
the Baseline Process, and Updates, including all such information designated as
proprietary or confidential, to make and have any companies other than Japanese
Companies make MEC Products and derivatives of MEC Products and to use, sell,
lease or otherwise dispose of such MEC Products and derivatives of MEC Products
worldwide.
(d) Subject to all of the terms and conditions of this Agreement, MEC
hereby grants to PI, for the term of this Agreement, a worldwide, nonexclusive,
non-assignable (except as otherwise provided in Section 9.4 below),
nontransferable, indivisible right and license under the MEC Patents to make,
have any companies other than Japanese Companies make, use, sell, lease or
otherwise dispose of MEC Products and derivatives of MEC Products.
(e) PI shall not have any rights under this Agreement or the licenses
granted herein to use any Confidential Information of MEC or Updates of MEC
delivered to PI on or after June 29, 1995, to design, develop, manufacture, use,
sell, lease or otherwise dispose of any products for any application for
energizing light.
(f) Although PI's Subsidiaries are not otherwise granted licenses
under this Agreement, any PI Subsidiary outside Japan may design, make, sell,
lease or otherwise dispose of Products to the same extent PI is licensed to do
so under Sections 4.2 and 4.3 of this Agreement. PI shall assure that each PI
Subsidiary that designs, makes, sells, leases or otherwise disposes of Products
pursuant to this Section 4.2(f) does so in compliance with all applicable
provisions of this Agreement. PI shall be responsible for any noncompliance by
any PI Subsidiary to the same extent as if PI itself were not in compliance.
4.3 Copyright and Mask Work Licenses. Subject to all of the terms and
--------------------------------
conditions of this Agreement, MEC and PI each grant to the other nonexclusive,
non-assignable (except as otherwise provided in Section 9.4 below),
nontransferable, royalty-free licenses under its copyrights and Mask Works to
make reproductions in copies and to distribute, import, export and sell Products
and to distribute such copies and Products to the extent necessary to
manufacture, use, lease, sell or otherwise dispose of Products as otherwise
permitted by this Article IV; provided, however, that each party shall take the
necessary actions, including but not limited to the affixing of copyright and
Mask Work notices, to protect the copyrights and Mask Works of the other party.
4.4 Other Rights Reserved. Anything in this Agreement to the contrary
---------------------
notwithstanding, no license is herein granted, and no act or acts hereunder
shall be construed as or result in conveying any license or right to either
party or to any third party expressly or by implication, estoppel or otherwise,
excepting the licenses and rights expressly granted and agreed to be granted
under Article IV of this Agreement.
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
11
4.5 Ownership. PI and MEC each hereby acknowledges and agrees that any
---------
Update made solely by either party under this Agreement shall be owned by the
party making such Update and subject to the licenses granted herein; and that
any Update made jointly by the parties (Joint Update) shall be owned solely by
PI and subject to the licenses granted herein. MEC hereby agrees to assign to
PI, and hereby does assign to PI, all its right, title and interest in and to
all Joint Updates, including all intellectual property rights therein. Upon
reasonable request by PI, MEC will execute all documents appropriate for PI to
perfect its rights in Joint Inventions. Such documents shall include but not be
limited to execution of assignments, patent applications and other documents.
All Updates will be conclusively considered to have been either (a) made solely
by PI or (b) made jointly by PI and MEC and, in either event, owned solely by
PI; unless MEC promptly notifies PI in writing that such Update (i) was made
without use of PI Confidential Information, (ii) has a substantial use other
than for manufacturing, or for incorporation into, Products and (iii) is
considered by MEC to be made solely by MEC.
ARTICLE V
---------
COMPENSATION
------------
5.1 Product Royalties Payable to PI.
----------------------------------
(a) MEC shall pay PI royalties, in Japanese yen on all units of
Product made by MEC and MEC's Subsidiaries and used, leased, sold or otherwise
disposed of by MEC and MEC's Subsidiaries, other than to PI, at the following
rates based upon the Net Sales of such Products:
Royalty Rate
------------
During the term of this Agreement ***
For four years after the term of this Agreement. ***
(b) Product shall be considered as used, sold, leased or disposed of,
as the case may be, when billed out, delivered, shipped or mailed to a customer
or lessee, or when first used or first set aside for future use by the
Matsushita Group, whichever shall first occur. Product scrapped and destroyed
shall not be considered as Product manufactured under this Agreement.
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
12
5.2 Product Royalties Payable to MEC.
--------------------------------
(a) PI shall pay MEC royalties, in Japanese yen, on all units of MEC
Product used, leased, sold or otherwise disposed of by PI and PI's Subsidiaries,
other than to MEC, at the following rates based upon the Net Sales of such MEC
Products:
Royalty Rate
------------
During the term of this Agreement ***
For four years after the term of this Agreement. ***
(b) MEC Product shall be considered as used, sold, leased or disposed
of, as the case may be, when billed out, delivered, shipped or mailed to a
customer or lessee, or when first used or first set aside for future use by PI
or any of its Subsidiaries, whichever shall first occur. MEC Product scrapped
and destroyed shall not be considered as Product manufactured under this
Agreement.
5.3 Determination of "Net Sales".
---------------------------
(a) "Net Sales" of Product shall be determined as follows:
(i) In respect of Product in the form of packaged, tested
product or as die or wafers sold in normal, arm's length, commercial
transactions between parties which are not in affiliation, the Net Sales shall
be the aggregate of the genuine selling prices at which customers are billed in
the usual course of business for such Product, without any deductions or credits
other than those determined in accordance with Section 5.3(b), if any.
(ii) In respect to Product in the form of packaged, tested
product or as die or wafers used, leased or otherwise disposed of, or sold
otherwise than in normal, arm's length, commercial transactions between parties
which are not in affiliation, the Net Sales shall be the aggregate of the
genuine selling prices of the same quantities of similar or substantially
similar Product which are sold in normal, arm's length, commercial transactions
between parties which are not in affiliation, or, if there be no similar or
substantially similar Product so sold, then the fair market value thereof,
without any deductions other than those determined in accordance with Section
5.3(b), if any.
(b) In determining its Net Sales, a party may deduct from the genuine
selling price, equivalent thereof or fair market value, as the case may be, of
Product, the amount of any sales, excise or other taxes, as well as any packing,
freight and transportation, payable by the party in respect of any such Product
to the extent that any such amount is included in the genuine selling price,
equivalent thereof or fair market value, as the case may be, of such Product and
is billed separately by the party to its customers. Each party shall be allowed
to take as a credit in determining Net Sales, (i) customary trade and quantity
discounts actually allowed, and (ii) allowances or credits to customers on
account of rejections or returns.
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
13
(c) MEC warrants that sales of the Products from MEC to any company in
the Matsushita Group shall be priced as though such company was a third party
customer and that the selling prices between MEC and such company will be
determined in normal arm's length transaction.
5.4 Certification of Royalties; Audit Rights.
----------------------------------------
(a) Within two (2) months after, and as of March 31, June 30,
September 30 and December 31 of each year during the period MEC is obligated to
pay royalties pursuant to this Agreement, MEC shall furnish PI with a written
statement certified by an officer of MEC specifying (i) the number of units of
each kind of Product used, sold, leased, or otherwise disposed of by MEC during
the quarter ending such March 31, June 30, September 30 and December 31, and
with respect to which compensation is payable under this Agreement, (ii) the
aggregate of the Net Sales of each such kind of such Product, (iii) the total
net compensation payable for reach such kind of such Product pursuant to this
Agreement. At the time of furnishing such statements, MEC shall also make the
payments prescribed therefor in Section 5.1.
(b) Within two (2) months after, and as of, each March 31, June 30,
September 30 and December 31 of each year during the period PI is obligated to
pay royalties pursuant to this Agreement, PI shall furnish MEC with a written
statement certified by an officer of PI specifying (i) the number of units of
each kind of MEC Product under PI Label used, sold, leased, or otherwise
disposed of by PI during the quarter ending such March 31, June 30, September 30
and December 31, and with respect to which compensation is payable under this
Agreement, (ii) the aggregate of the Net Sales of each such kind of such
Product, (iii) the total net compensation payable for each such kind of such
Product pursuant to this Agreement. At the time of furnishing such statements,
PI shall also make the payments prescribed therefor in Section 5.2.
(c) A similar statement shall be rendered and payment made within two
(2) months after, and as of, the date of any termination of this Agreement
covering the period from the end of that covered by the last preceding statement
to such date of termination. Such statement and payment shall include all
Product manufactured prior to such date of termination but not covered by prior
statements and payments, which Product shall be considered as sold as of such
date of termination.
(d) In the event that any payments under this Agreement by either
party are taxable by the government of Japan/United States, whichever
applicable, and such tax is required to be withheld from the payment to the
other party, the party to make the payment shall deduct such amount from the
payment to the receiving party to the extent permitted under U.S./Japan Income
Tax Convention and shall pay such tax on behalf of the receiving party. In such
event, the party to make payment shall obtain and transmit to the receiving
party the proper tax receipt evidencing the payment of such tax.
(e) Each party shall keep, notwithstanding any termination or the
expiration of this Agreement, true and accurate records, files and books of
account containing all the data reasonably required for the full computation and
verification of the amounts to be paid and the information to be given in the
statements provided hereunder. Each party shall, during usual business hours,
permit certified public accountants designated by the other party, at the
requesting party's expense and by prior arrangement, and not more than once a
year, adequately to inspect the same for the sole purpose of
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
14
determining the amounts payable pursuant to this Article V. Such record need not
be retained by each party beyond three (3) years from the date on which the
royalties hereunder becomes due.
(f) MEC shall keep, notwithstanding any termination or the expiration
of this Agreement, true and accurate records, files and books of account
containing all the data reasonably required for the verification of compliance
of the territorial restrictions of the sale of MEC Products and Restricted
Products by MEC for a period of three (3) years from such sale. MEC guarantees
that MEI shall keep true and accurate records, files and books of account, of
the same nature, under the same conditions, and for the same period, all as set
forth in the foregoing sentence. Upon PI's or MEC's determination that a
violation of said territorial restrictions has taken place, MEC shall provide to
PI the relevant documents, including those of MEI, identifying the likely source
and MEC's plan to immediately cure such violation and prevent further
violations.
5.5 PI and MEC will each exert reasonable efforts to assert their rights
under law to protect the Baseline Process against infringement by others.
5.6 Quarterly Fee Payable to PI. Within ten (10) days after each of the
---------------------------
following dates: July 14, September 30 and December 31 of calendar 2000, March
31, June 30, September 30 and December 31 of calendar of 2001, and March 31 of
calendar 2002, MEC shall pay a non-refundable, non-deductible fee to PI in the
amount of ***.
ARTICLE VI
----------
REPRESENTATIONS AND WARRANTIES
------------------------------
6.1 Representations and Warranties. PI and MEC each represents that: it
------------------------------
has the right to grant the rights and licenses granted under this Agreement, to
transfer the information transferred under this Agreement, and to provide the
technical assistance called for; that its execution, delivery and performance of
this Agreement have been duly authorized by its Board of Directors and any other
necessary corporate action; and that the terms and conditions of this Agreement
do not violate its Articles of Incorporation or Bylaws (or their equivalent) and
do not conflict with any other material agreement to which it is a party or by
which it is bound.
6.2 Certain Disclaimers.
-------------------
(a) Nothing contained in this Agreement shall be construed as (i) a
warranty or representation by either party as to the validity or scope of any
Patents; or (ii) a warranty or representation that any manufacture, sale, lease,
use, or other disposition hereunder will be free from infringement of Patents
other than those under which, and to the extent to which, licenses are granted
hereunder; or (iii) a warranty or representation that any product can be
manufactured without infringing the patents or other proprietary rights of third
parties; or (iv) an agreement to bring or prosecute actions or suits against
third parties for infringement or conferring any right to bring or prosecute
actions or suits against third parties for infringement; or (v) conferring any
right to use in advertising, publicity, or otherwise, any trademark, trade name
or name or any contraction, abbreviation or simulation thereof, of either party
(provided, however, that PI may identify MEC as a foundry and second source for
PI's products); or (vi) conferring
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
15
by implication, estoppel or otherwise upon any party licensed hereunder, any
license or other right under any Patent or other right except the licenses and
rights expressly granted hereunder; or (vii) a warranty that one party shall be
able to make successfully any products using the other party's technical
information; or (viii) that the receiving party will be able to use the
technology without infringing patents or other rights of third parties.
(b) EXCEPT AS OTHERWISE EXPRESSLY STATED IN THIS AGREEMENT, NEITHER
PARTY MAKES ANY WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY FOR THE
OTHER PARTY'S USE OF ANY TECHNICAL INFORMATION OR ASSISTANCE PROVIDED HEREUNDER;
NOR FOR THE QUALITY OF ANY PRODUCT OR PROCESS MADE HEREUNDER..
ARTICLE VII
-----------
EXPORT CONTROL
--------------
7.1 Technical Data.
--------------
(a) Each party hereby assures the other that it will not, without
prior authorization, if required, of the Office of Export Administration, U.S.
Department of Commerce, 00xx xxx Xxxxxxxxxxxx Xxx., X.X., Xxxxxxxxxx, X.X.
00000, export or re-export (as defined in Section 779.1 (b)(c) of the Export
Administration Regulations "Regulations" and any amendments thereto) the
technical data covered thereby. PI shall inform MEC in writing of the technical
data restricted under such Regulations as well as its restricted country group
upon PI's disclosure or provision of technical information.
(b) Other Restrictions. In exercising its rights under this
------------------
Agreement, each party agrees to comply strictly and fully with all export
controls imposed on Products, by any country or organization or nations within
whose jurisdiction each party operates or does business. Each party agrees not
to export or permit export of Products or any related technical data or any
direct product of any related technical data, without complying with the export
control laws in the relevant jurisdiction.
(c) Each party shall not export the Product to any country designated
as "Countries against which the sanctions should be taken" by certain
resolutions of the Security Council of the United Nations regarding the
sanctions against certain countries, as long as such resolutions remain valid
and effective. For purposes of this Agreement, any re-export in violation of
such resolutions by a customer of either MEC or PI will not be considered to be
an export in violation of such resolutions by MEC or PI, as the case may be, so
long as MEC or PI, as the case may be, did not knowingly participate in such re-
export.
(d) During and after the term of this Agreement, to the extent the
same practically is within its control, each party shall not sell, lease or
otherwise dispose of, directly or indirectly, any Product to customers whom such
party knows intend to make use of the Product for Military Purposes (defined
herein below). For the purpose of this Agreement, "Military Purposes" means the
design, development, manufacture or use of any weapons, including without
limitation nuclear weapons, biological weapons, chemical weapons and missiles.
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
16
(e) In the event either party violates the provision of this Section
7, the non-violating party shall have the right to require reasonable written
assurances from the violating party that such violation, whether or not past
incidents of violation can be cured, will not continue in the future, and if the
violating party does not deliver such assurances to the non-violating party
promptly after its request, the non-violating party may suspend the performance
of its obligations under this Agreement until such time as it receives such
assurances, without any prejudice to the rights and remedies which the non-
violating party may have under this Agreement. In the event that such assurance
is not delivered to the non-violating party within three (3) months after
request, the non-violating party shall have the right to terminate forthwith,
without any prejudice to the rights and remedies which it may have hereunder,
this Agreement, by giving a written notice to the violating party.
ARTICLE VIII
------------
EXPIRATION AND TERMINATION
--------------------------
8.1 Term of Agreement. This Agreement shall become effective as of the
-----------------
Effective Date and shall continue in full force and effect, unless sooner
terminated as elsewhere provided in this Agreement, until the fifth (5th)
anniversary of the Effective Date, at which time it shall expire.
8.2 Renewal.
-------
If this Agreement has not earlier terminated, the parties agree to
negotiate in good faith, beginning on the fourth (4th) anniversary of the
Effective Date of this Agreement, for the continuation on mutually agreeable
terms of the licenses, royalty arrangements, manufacturing commitments and other
terms and conditions included in this Agreement and the Foundry Agreement.
8.3 Termination.
-----------
(a) Except as otherwise set forth in this section, if either party
shall at any time default, without any material causative fault on the part of
the other party, by failing to substantially perform any material provision of
this Agreement or the Foundry Agreement, and such default shall not be cured
within sixty (60) days after written notice to it from the other party
specifying the nature of the default, the non-defaulting party shall have the
right to terminate this Agreement and the licenses it has granted under the
Prior License Agreement, at any time thereafter by giving written notice of
termination to the other party, and upon the giving of such notice of
termination this Agreement and such licenses shall terminate immediately.
Subject to Section 8.5(b)(ii), the licenses and rights granted to the non-
defaulting party under this Agreement shall survive such termination. The party
receiving notice shall have the right to cure any such default up to the date of
termination. In the event either party defaults by failing to substantially
perform any material provision of this Agreement or the Foundry Agreement, the
other party shall have the right to suspend further transfers of information,
including Updates, by it and shall not be obligated to resume such transfers
until such default has been cured.
(b) Each party shall have the right to terminate this Agreement and
the licenses it has granted under the Prior License Agreement, by giving written
notice of termination to the other at any time upon or after, (i) the filing by
the other party of a petition in bankruptcy or insolvency, or (ii) upon or
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
17
after the filing of any voluntary or involuntary petition or answer seeking
reorganization, readjustment or arrangement of the other party's business under
any law relating to bankruptcy or insolvency, or (iii) upon or after the
appointment of a receiver for all or substantially all of its property, or (iv)
upon or after the making by the other party of any assignment or attempted
assignment for the benefit of creditors, or (v) upon or after the institution of
any proceedings for the liquidation or winding up of the other party's business
or for the termination of its corporate charter; and this Agreement and such
licenses shall terminate automatically on the thirtieth (30th) day after such
notice of termination is given, without further notice, demand or opportunity to
cure. Subject to Section 8.5(b)(ii), the licenses and rights granted to the non-
defaulting party under this Agreement shall survive such termination.
(c) The following articles and sections shall survive any expiration
or termination of this Agreement: Articles III, V, VI, VII, and Sections 9.11,
9.12, 9.13 and 9.14.
8.4 Consequences of Expiration.
--------------------------
(a) Upon expiration of this Agreement, all rights and obligations of
the parties hereunder shall cease and determine, except for rights and
obligations which, by the terms of this Agreement, continue after expiration or
earlier termination of this Agreement and except that the expiration of this
Agreement shall not release either party from any of its obligations accrued
hereunder prior to the time expiration becomes effective.
(b) Without limiting the generality of the foregoing, upon expiration
of this Agreement, the rights and licenses granted by the parties to each other
for the term of this Agreement in Article IV hereof shall terminate immediately;
provided, however, that:
(i) subject to the continuing payment of royalties set forth in
Section 5.1, MEC shall retain the licenses granted by PI under Article IV; and
(ii) subject to the continuing payment of royalties set forth in
Section 5.2, PI shall retain the licenses granted by MEC under Article IV.
If the royalty amounts set forth in this Section 8.4(b) are paid
in full at the end of four (4) years after the expiration of this Agreement
("Additional Term"), all royalty obligations shall be deemed fully paid up.
Upon the expiration of the Additional Term, so long as a party
has performed its respective obligations hereunder during such Additional Term,
including payment of all royalties, the rights and licenses granted to such
party under Article IV of the Agreement shall be fully paid-up and such party
shall have free right to utilize any information furnished and rights granted
under this Agreement on or before its expiration, without any further payments,
subject to continuing confidentiality obligations as provided in Article III of
this Agreement and compliance with the terms of the rights and licenses granted
under Article IV of the Agreement, including, without limitation, the
territorial and Restricted Product restrictions on such rights and licenses.
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
18
(c) Notwithstanding the final paragraph of Section 8.4(b), it is
confirmed by the parties that, after the expiration of this Agreement, neither
party shall be obligated to continue to furnish any information to the other
party.
8.5 Consequences of Termination.
---------------------------
(a) Upon termination of this Agreement, all rights and obligations of
the parties hereunder shall cease and determine as from such date of
termination, except for rights and obligations which, by the terms of this
Agreement, continue after such termination and except that no termination of
this Agreement shall release either party from any of its obligations accrued
hereunder but not yet performed prior to the time such termination becomes
effective.
(b) Notwithstanding the above Section 8.5(a);
(i) in the event of termination of this Agreement pursuant
to Section 8.3 above, the rights and licenses granted to the defaulting party
under Article IV shall terminate upon such termination, provided, however, that
the defaulting party shall retain the rights to manufacture, use, sell or
otherwise dispose of the units of Products which have been ordered by its
customers or any inventory of the Products at the time of termination subject to
the royalty payment pursuant to Article V hereof.
(ii) in the event of termination of this Agreement pursuant
to Section 8.3, above, the rights and licenses granted to the non-defaulting
party under Article IV of the Agreement shall become perpetual, fully paid-up
and irrevocable upon payment of all royalties that would have been owed if such
termination had not occurred.
ARTICLE IX
----------
MISCELLANEOUS AND GENERAL PROVISIONS
------------------------------------
9.1 Alternate Sources. Subject to the terms of this Agreement, PI and MEC
-----------------
may act as alternate sources for the Products and advise their customers and
distributors of each other's ability to do so. Except as otherwise expressly set
forth in the Foundry Agreement, if at all, nothing in this Agreement or the
Foundry Agreement shall be interpreted as requiring either party to manufacture
specific products nor as requiring either party to act as an alternate source
for the other.
9.2 Publicity. PI and MEC shall agree on the content and release of a
---------
press announcement relating to the transactions contemplated by this Agreement
and the Foundry Agreement. Neither party shall, however, except as, to the
extent, and in the manner, required by law or regulation, disclose to any third
party any of the specific terms or conditions, including payment terms, under
which the transactions contemplated by this Agreement are to be carried out.
9.3 Possible Future Cooperation. PI agrees to consider MEC for the license
---------------------------
of other technology developed by PI in the future before licensing such future
technology to other parties. However, nothing in this Agreement shall be
interpreted as requiring the parties to enter into any future agreements.
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
19
9.4 Successors and Assigns; No Assignment.
-------------------------------------
(a) This Agreement, and rights and obligations herein, shall be
binding upon and inure to the benefit of the parties hereto and their respective
successors and assigns, provided that except as set forth below neither party
shall assign this Agreement or any of its rights hereunder without the prior
written consent of the other Party.
(b) Notwithstanding any other provision of the Agreement, PI may
without the prior consent of MEC assign all of its rights under this Agreement
to a purchaser of all or substantially all of PI's stock or assets or to a third
party participating in a merger or other corporate reorganization in which PI is
a constituent corporation. Within 180 days after such assignment, if the
assignee is (i) a competitor of MEC, and (ii) of comparable size to MEC or
larger, then either MEC or PI's assignee may elect to have this Agreement be
deemed to have expired and to have the provisions of Section 8.4(b) take effect
180 days after written notice to the other party of such election.
(c) As a condition of any assignment of this Agreement or any of the
rights granted hereunder, any successor shall expressly assume in writing the
performance of all terms and conditions of this Agreement to be performed by the
assigning party including such party's obligations hereunder with respect to the
protection of Confidential Information. The successor's name shall thereafter
automatically be substituted for the name of the assigning party in this
Agreement.
9.5 No Rights to Marks, Etc. Except as provided in Section 9.2 above,
-----------------------
nothing contained in this Agreement shall confer any rights to use in
advertising, publicity, or otherwise, any trademarks, trade names, or any
contraction, abbreviation or simulation thereof, of either party, provided such
restriction shall not apply to identification numbers and descriptions of
devices and software which are the subject matter of this Agreement.
9.6 No Joint Venture. Nothing contained in this Agreement shall be
----------------
construed as:
(a) creating any partnership, joint venture or other similar
relationship between PI and MEC; or
(b) obligating either party to commercially produce or to continue to
commercially produce, any solid state device of any type whatsoever, or any
parts or components thereof (except as provided in the Foundry Agreement).
9.7 Force Majeure. Anything contained in this Agreement to the contrary
-------------
notwithstanding, the obligations of the parties hereto shall be subject to all
laws, both present and future, of any government having jurisdiction over the
parties hereto, and to orders, regulations, directions or requests of any such
government, or any department, agency or corporation thereof, and to war, acts
of public enemies, strikes or other labor disturbances, fires, floods,
earthquakes, acts of God, or causes of like or different kind beyond the control
of the parties and the parties hereto shall be excused from any failure to
perform any obligation hereunder to the extent such failure is caused by any
such law, order, regulation, direction, request or contingency, for the period
such cause endures. Notwithstanding the foregoing, in the event any such cause
delays either party's performance of any of its material obligations under this
Agreement,
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
20
the other party may suspend its performance hereunder for the period such delay
continues and if any such cause renders impossible or delays for a period of
more than six months either Party's performance of any of its material
obligations under this Agreement, the other party may terminate this Agreement
pursuant to Section 8.3, as if a material default had occurred hereunder and
shall have the rights and remedies specified in Article VIII. The party whose
performance is delayed on account of any such cause shall promptly notify the
other party, and shall exert its best efforts to recommence performance as soon
as possible.
9.8 Entire Agreement. This Agreement and the Foundry Agreement to be
----------------
entered into along with this Agreement set forth the entire agreement and
understanding between the parties as to the subject matter hereof and thereof
and supersede all prior discussions, negotiations and agreements, written, oral
or implied, between them in respect of the subject matter of this Agreement.
None of the parties shall be bound by any conditions, definitions, warranties,
understandings or representations with respect to such subject matter other than
as expressly provided herein or therein or as duly set forth on or subsequent to
the date hereof or thereof in writing and signed by a proper and duly authorized
officer or representative of the party to be bound thereby.
9.9 Remedies. Upon the breach by any party to this Agreement of any
--------
provision of this Agreement or the Foundry Agreement, the non-breaching party
shall have the right to pursue all available remedies at law or in equity it may
elect, in order to obtain the benefits to have been provided pursuant to this
Agreement, or to obtain adequate recourse or compensation in the event the same
are not so provided.
9.10 Absence of Waivers. Failure or delay on the part of a party hereto to
------------------
enforce any of the provisions of this Agreement or any rights with respect
thereto, or to exercise any election provided for herein shall in no way be
considered to be a waiver of such provisions, rights or elections or in any way
affect the validity of this Agreement. Failure or delay on the part of a party
to exercise any of the said provisions, rights or elections shall not preclude
or prejudice such party from later enforcing or exercising the same or any other
provisions, rights or elections which it may have under this Agreement.
9.11 Notices. All notices shall be given in writing either by personal
-------
delivery to the party to whom notice is given, or by a commercial overnight
courier service, or by registered or certified mail, return receipt requested.
The date upon which any such notice is so personally delivered, the date of
confirmation of courier delivery, or if the notice is given by registered or
certified mail the date of the return receipt, shall be deemed to be the date of
such notice, irrespective of the date appearing therein.
If to PI: POWER INTEGRATIONS, INC.
000 X. Xxxxxxxx Xxx.
Xxxxxxxxx, Xxxxxxxxxx 00000
Attn: President
If to MEC: MATSUSHITA ELECTRONICS CORPORATION
0 Xxxxxxxxxxxxxxx, Xxxxxxxxxx,
Xxxxx 000 XXXXX
Attn: Director, Discrete Device Division
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
21
9.12 Injunctive Relief. Each party agrees that its confidentiality
-----------------
obligations provided in this Agreement are necessary and reasonable in order to
protect the disclosing party and its business, and each party expressly agrees
that monetary damages would be inadequate to compensate the disclosing party for
any breach by the receiving party of its covenants and agreements as to its
confidentiality obligations set forth in this Agreement. Accordingly,
notwithstanding Section 9.17, each party agrees and acknowledges that any such
breach or threatened breach will cause irreparable injury to the disclosing
party and that, in addition to any other remedies that may be available, in law,
in equity or otherwise, the disclosing party shall be entitled to obtain
injunctive relief against any breach, or threatened breach of such
confidentiality obligations, or the continuation of any such breach, by the
receiving party, without the necessity of proving actual damages or of posting
bond.
9.13 Attorneys' Fees. In the event of any action, suit or proceeding,
---------------
including arbitration, between the parties hereto, the prevailing party shall be
entitled to recover its costs, including those for expert witnesses, and
reasonable attorneys' fees therein.
9.14 Headings. All paragraph captions are for reference only and shall
--------
not be considered in construing this Agreement.
9.15 Severability. Any provision or provisions of this Agreement which
------------
in any way contravenes a law of any state or country which the Agreement is in
effect shall, in such state or country and to the extent of such contravention
of local law, be deemed separable and shall not affect any other provision or
provisions of this Agreement.
9.16 Governing Law. This Agreement and the rights and obligations of the
-------------
parties hereunder shall be governed by, and construed in accordance with, the
laws of the United States and the State of California as applied to agreements
entered into and to be performed entirely within California between California
residents without regard to conflict of laws principles.
9.17 Arbitration. Disputes arising out of or in connection with the
-----------
validity, interpretation, application, or enforcement of this Agreement or the
performance of either party will be discussed and settled amicably by good faith
negotiations between PI and MEC. Any such disputes which cannot be settled
amicably and by such good faith negotiations within sixty (60) days after
written notice by one party to the other of such inability to amicably settle
shall thereafter be settled by binding arbitration. The arbitration shall be
conducted in English pursuant to the Rules of Arbitration of the International
Chamber of Commerce, which shall be held in San Francisco, California. Any
judgement or award rendered in these arbitrations may be entered and enforced by
any court of competent jurisdiction and may include, when appropriate, equitable
relief.
9.18 Time of Essence. Time is of the essence in the performance of each
---------------
and every obligation of the parties under this Agreement.
9.19 Originals. This Agreement shall be executed in duplicate, each of
---------
which shall be an original, and shall be kept by PI and MEC, respectively.
9.20 Prior License Agreement. All intellectual property that was licensed
------------------------
under the terms and
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
22
conditions of the Prior License Agreement remain licensed under this Agreement.
IN WITNESS WHEREOF, PI and MEC have caused this Agreement to be executed in
their names by the duly authorized officers or representatives as of the date
first above written.
POWER INTEGRATIONS, INC. MATSUSHITA ELECTRONICS CORPORATION
By: /s/______________________________ By: /s/_______________________________
Name: _______________________________ Name: _________________________________
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
23
Appendix A
Baseline Process
----------------
DC PROCESS FLOW CHART:
1. Material specification
--------------------------
Crystal type : ***
Resistivity : ***
Thickness : ***
Diffusion : ***
preclean
Etch rate : ***
2. Blocking oxidation
----------------------
Diffusion
preclean
Blocking ***
oxidation
Step ***
Push in ***
Anneal ***
Ramp to ***
Oxidation ***
Oxidation ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
3. N-Well Mask (CD's measured)
-------------------------------
Microscope inspect
4. N-Well Etch
---------------
Resist bake : ***
Microscope inspect
Wet etch : ***
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
24
Plasma resist clean
Resist clean : ***
CD's measured
5. Well oxidation
------------------
Diffusion preclean
Well oxidation ***
Step ***
***
Push in ***
Ramp to ***
Oxidation ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
6. Phosphorus N-Well implant
-----------------------------
Dose : ***
Energy : ***
Specie : ***
Cleaning : ***
7. N-Well drive
----------------
Diffusion
preclean
Step ***
Push in ***
Ramp to ***
Anneal ***
Ramp to ***
8. Well oxidation etch
-----------------------
Wet etch : ***
Microscope inspect
9. Implant oxidation
---------------------
Diffusion preclean
Implant oxidation ***
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
25
Step ***
Push in ***
Ramp to ***
Oxidation ***
Oxidation ***
Anneal ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
10. P-Top Mask (CD's measured)
--------------------------------
Microscope
inspect
11. Boron P-Top implant
------------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
Microscope inspect
12. Oxide strip
----------------
Oxide strip : ***
Microscope inspect
13. Regrow oxidation
---------------------
Diffusion
preclean
Regrow oxidation ***
Step ***
Push in ***
Ramp to ***
Oxidation ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
14. Nitride deposition
-----------------------
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
26
Nitride deposition(LP- ***
CVD)
Temperature : ***
NH3 : ***
SiH2Cl2 : ***
*Time adjusted as required to maintain specified Nitride thickness.
Visual inspect
15. OD Mask (CD's measured)
----------------------------
Microscope inspect
16. Source/Drain(Active Area) etch
-----------------------------------
Nitride etch (Plasma etcher)
Microscope inspect
Plasma resist
Clean
Resist clean : ***
CD's measured
17. Boron field implant Mask (no CD's measured)
------------------------------------------------
Microscope inspect
18. Oxide etch
---------------
Resist : ***
bake
Microscope inspect
Wet etch : ***
Resist bake : ***
19. BF2 field implant
----------------------
Dose : ***
Energy : ***
Specie : ***
20. Boron Punchthrough implant
-------------------------------
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
27
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
Microscope inspect
21. Field oxidation
--------------------
Diffusion preclean
Field oxidation ***
Step ***
Push in ***
Anneal ***
Oxidation ***
Ramp to ***
Anneal ***
Ramp to ***
Oxidation ***
Oxidation ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
22. Phosphoric Acid Nitride strip
----------------------------------
Oxide dip : ***
Phosphoric Acid : ***
strip
Microscope inspect
Oxide dip : ***
Microscope inspect
23. Sacrificial oxidation
--------------------------
Diffusion preclean
Sacrificial oxidation ***
Step ***
Push in ***
Anneal ***
Oxidation ***
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
28
Oxidation ***
Oxidation ***
Ramp to ***
Anneal ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
24. P-Buried Mask (CD's measured)
----------------------------------
Microscope inspect
25. Boron P-Buried implant
---------------------------
Dose : ***
Energy : ***
Specie : ***
Tilt: : ***
Plasma resist clean
Resist clean : ***
Microscope inspect
26. Vt implant Mask (no CD's measured)
---------------------------------------
Microscope inspect
27. Boron Gate implant
-----------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
Oxide dip : ***
Microscope inspect
28. Gate oxidation
-------------------
Diffusion preclean
Gate oxidation ***
Step ***
Push in ***
Anneal ***
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
29
Oxidation ***
Oxidation ***
Oxidation ***
Ramp to ***
Anneal ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
29. Poly deposition
--------------------
Polysilicon deposition(LP-CVD) ***
Temperature : ***
SiH4 : ***
Visual inspect
29A. Backside Etch
------------------
Photoresist spin
Resist bake ***
Backside poly etch ***
Backside oxide dip ***
Plasma Resist
Clean
Resist Clean Sulfuric/peroxide
30. Poly dope
--------------
Diffusion preclean
Poly dope ***
Step ***
Push in ***
Ramp to ***
Doping ***
Ramp to ***
*Time adjusted as required to maintain specified Poly resistivity.
Visual inspect
Oxide dip ***
Cleaning ***
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
30
***
Microscope inspect
32. Poly etch
--------------
Plasma Poly etch ***
Microscope inspect
Plasma resist clean
Resist clean : ***
Oxide dip : ***
Microscope inspect
CD's measured
33. Implant oxidation
----------------------
Diffusion preclean
Implant oxidation ***
Step ***
Push in ***
Anneal ***
Oxidation ***
Anneal ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
34. N+ Mask (no CD's measured)
-------------------------------
Microscope inspect
35. Arsenic Source/Drain implant
---------------------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
36. P+ Mask (no CD's measured)
-------------------------------
Microscope inspect
37. Boron Source/Drain implant
-------------------------------
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
31
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
38. Source/Drain re-oxidation
------------------------------
Diffusion preclean
Source/Drain re-oxidation ***
Step ***
Push in ***
Anneal ***
Oxidation ***
Ramp to ***
Anneal ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
39. Glass deposition
---------------------
LTO deposition(LP-CVD) ***
Temperature : ***
SiH4 : ***
MIX gas : ***
O2 : ***
He : ***
Visual inspect
Scrubber cleaning
40. Densify
------------
Step ***
Push in ***
Ramp to ***
Densify ***
Ramp to ***
41. Contact Mask (CD's measured)
---------------------------------
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
32
Microscope inspect
42. Contact etch
-----------------
Plasma flush
Resist
bake : ***
Microscope inspect
Oxide etch : ***
Resist bake : ***
Oxide thickness
measured
Plasma etch
(CHF3)
Oxide thickness
measured
Microscope inspect
Resist : ***
bake
Oxide etch : ***
Plasma resist clean
Resist clean : ***
Microscope inspect
CD's measured
43. AL/Si/Cu Sputter
---------------------
Pre-Sputter clean : ***
Wafer bake : ***
Aluminum : ***
Visual inspect
44. Metal Mask (CD's measured)
-------------------------------
Microscope inspect
45. Metal etch
---------------
Resist : ***
bake
Plasma metal etch on PE8300 using BCl3
Microscope inspect
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
33
Plasma resist clean
Microscope inspect
CD's measured
46. AL sinter
--------------
Step ***
Push in ***
Sinter ***
47. Plasma Nitride deposition (VDS-5800)
-----------------------------------------
Plasma Nitride ***
deposition
Refractive index : ***
Visual inspect
48. Pad Mask (no CD's measured)
--------------------------------
Microscope inspect
49. Pad etch
-------------
Plasma etch
(CF4/O2)
Microscope inspect
Plasma resist clean
Microscope inspect
50. Nitride sinter
-------------------
Step ***
Push in ***
Sinter ***
53. Backgrind
--------------
Tape coating : ***
Backgrind : ***
Peeling tape off
Water cleaning
Visual inspect
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
34
STANDARD 700V (125ohm) PROCESS FLOW CHART:
1. Material specification
--------------------------
Crystal type ***
Resistivity ***
Thickness ***
Diffusion preclean ***
Etch rate ***
2. Blocking oxidation
----------------------
Diffusion preclean
Blocking oxidation ***
Step ***
Push in ***
Anneal ***
Ramp to ***
Oxidation ***
Oxidation ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
3. N-Well Mask (CD's measured)
-------------------------------
Microscope inspect
4. N-Well Etch
---------------
Resist
bake : ***
Microscope inspect
Wet etch : ***
Plasma resist clean
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
35
Resist clean : ***
CD's measured
5. Well oxidation
------------------
Diffusion preclean
Well oxidation ***
Step ***
Push in ***
Ramp to ***
Oxidation ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
6. Phosphorus N-Well implant
-----------------------------
Dose : ***
Energy : ***
Specie : ***
Cleaning : ***
7. N-Well drive
----------------
Diffusion preclean
Step ***
Push in ***
Ramp to ***
Anneal ***
Ramp to ***
8. Well oxidation etch
-----------------------
Wet etch : ***
Microscope inspect
9. Implant oxidation
---------------------
Diffusion preclean
Implant oxidation ***
Step ***
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
36
Push in ***
Ramp to ***
Oxidation ***
Oxidation ***
Anneal ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
10. P-Top Mask (CD's measured)
-------------------------------
Microscope inspect
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
Microscope inspect
12. P-Top drive
----------------
Diffusion preclean
Step ***
Push in ***
Anneal ***
Ramp to ***
Anneal ***
Ramp to ***
13. Oxide strip
----------------
Oxide strip : ***
Microscope inspect
14. Regrow oxidation
---------------------
Diffusion preclean
Regrow oxidation ***
Step ***
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
37
Push in ***
Ramp to ***
Oxidation ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
15. Nitride deposition
-----------------------
Nitride deposition(LP- ***
CVD)
Temperature : ***
NH3 : ***
SiH2Cl2 : ***
*Time adjusted as required to maintain specified Nitride thickness.
Visual inspect
16. OD Mask (CD's measured)
----------------------------
Microscope inspect
17. Source/Drain(Active Area) etch
-----------------------------------
Nitride etch (Plasma etcher)
Microscope inspect
Plasma resist Clean
Resist clean : ***
CD's measured
18. Boron field implant Mask (no CD's measured)
------------------------------------------------
Microscope inspect
19. Oxide etch
---------------
Resist
bake : ***
Microscope inspect
Wet etch : ***
Resist
bake : ***
20. BF2 field implant
----------------------
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
38
Dose : ***
Energy : ***
Specie : ***
21. Boron Punchthrough implant
-----
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
Microscope inspect
22. Field oxidation
--------------------
Diffusion preclean
Field oxidation ***
Step ***
Push in ***
Anneal ***
Oxidation ***
Ramp to ***
Anneal ***
Ramp to ***
Oxidation ***
Oxidation ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
23. Phosphoric Acid Nitride strip
----------------------------------
Oxide dip : ***
Phosphoric Acid : ***
strip
Microscope inspect
Oxide dip : ***
Microscope inspect
24. Sacrificial oxidation
--------------------------
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
39
Diffusion preclean
Sacrificial oxidation ***
Step ***
Push in ***
Anneal ***
Oxidation ***
Oxidation ***
Oxidation ***
Ramp to ***
Anneal ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
25. Vt implant Mask (no CD's measured)
---------------------------------------
Microscope inspect
26. Boron Gate implant
-----------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
Oxide dip : ***
Microscope inspect
27. Gate oxidation
-------------------
Diffusion preclean
Gate oxidation ***
Step ***
Push in ***
Anneal ***
Oxidation ***
Oxidation ***
Oxidation ***
Ramp to ***
Anneal ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
40
Visual inspect
28. Poly deposition
--------------------
Polysilicon ***
deposition(LP-CVD)
Temperature : ***
SiH4 : ***
Visual inspect
29. Backside Etch
-----------------
Photoresist spin
Resist bake ***
Backside polY ***
Backside oxide ***
Plasma Resist Clean
Resist Clean ***
30. Poly dope
-----
Diffusion preclean
Poly dope ***
Step ***
Push in ***
Ramp to ***
Doping ***
Ramp to ***
*Time adjusted as required to maintain specified Poly resistivity.
Visual inspect
Oxide dip ***
Cleaning ***
31. Gate Mask (CD's measured)
------------------------------
Microscope inspect
32. Poly etch
--------------
Plasma Poly etch ***
Microscope inspect
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
41
Plasma resist clean
Resist clean : ***
Oxide dip : ***
Microscope inspect
CD's measured
33. Implant oxidation
----------------------
Diffusion preclean
Implant oxidation ***
Step ***
Push in ***
Anneal ***
Oxidation ***
Anneal ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
34. N+ Mask (no CD's measured)
-------------------------------
Microscope inspect
35. Arsenic Source/Drain implant
---------------------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
36. P+ Mask (no CD's measured)
-------------------------------
Microscope inspect
37. Boron Source/Drain implant
-------------------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
38. EP Mask (no CD's measured)
-------------------------------
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
42
Microscope inspect
39. Boron EP implant
---------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
40. Source/Drain re-oxidation
------------------------------
Diffusion preclean
Source/Drain re-oxidation ***
Step ***
Push in ***
Anneal ***
Oxidation ***
Ramp to ***
Anneal ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
41. Glass deposition
---------------------
LTO deposition(LP-CVD) ***
Temperature : ***
SiH4 : ***
MIX gas : ***
O2 : ***
He : ***
Visual inspect
Scrubber cleaning
42. Densify
------------
Step ***
Push in ***
Ramp to ***
Confidential
***IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
43
Densify ***
Ramp to ***
43. Contact Mask (CD's measured)
---------------------------------
Microscope inspect
44. Contact etch
-----------------
Plasma flush
Resist
bake : ***
Microscope inspect
Oxide etch : ***
Resist
bake : ***
Oxide thickness
measured
Plasma etch
(CHF3)
Oxide thickness
measured
Microscope inspect
Resist bake : ***
Oxide etch : ***
Plasma resist clean
Resist clean : ***
Microscope inspect
CD's measured
45. AL/Si/Cu Sputter
---------------------
Pre-Sputter clean : ***
Wafer bake : ***
Aluminum : ***
Visual inspect
46. Metal Mask (CD's measured)
-------------------------------
Microscope inspect
47. Metal etch
---------------
Confidential
*** INDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
44
Resist
bake : ***
Plasma metal etch on PE8300 using BCl3
Microscope inspect
Plasma resist clean
Microscope inspect
CD's measured
48. AL sinter
--------------
Step ***
Push in ***
Sinter ***
49. Plasma Nitride deposition (VDS-5800)
-----------------------------------------
Plasma Nitride ***
deposition
Refractive index : ***
Visual inspect
50. Pad Mask (no CD's measured)
--------------------------------
Microscope inspect
51. Pad etch
-------------
Plasma etch
(CF4/O2)
Microscope inspect
Plasma resist clean
Microscope inspect
52. Passivation sinter
-----------------------
Step ***
Push in ***
Sinter ***
53. Passivation sinter
-----------------------
Step ***
Confidential
*** INDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
45
Push in ***
Sinter ***
54. Backgrind
--------------
Tape coating : ***
Backgrind : ***
Peeling tape off
Water cleaning
STANDARD 400V (125ohm) PROCESS FLOW CHART:
1. Material specification
--------------------------
Crystal type : ***
Resistivity : ***
Thickness : ***
Diffusion preclean : ***
Etch rate : ***
2. Blocking oxidation
----------------------
Diffusion preclean
Blocking oxidation ***
Step ***
Push in ***
Anneal ***
Ramp to ***
Oxidation ***
Oxidation ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
3. N-Well Mask (CD's measured)
-------------------------------
Confidential
*** INDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
46
Microscope inspect
4. N-Well Etch
---------------
Resist bake : ***
Microscope inspect
Wet etch : ***
Plasma resist clean
Resist clean : ***
CD's measured
5. Well oxidation
------------------
Diffusion preclean
Well oxidation ***
Step ***
Push in ***
Ramp to ***
Oxidation ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
6. Phosphorus N-Well implant
-----------------------------
Dose : ***
Energy : ***
Specie : ***
Cleaning : ***
7. N-Well drive
----------------
Diffusion preclean
Step ***
Push in ***
Ramp to ***
Anneal ***
Ramp to ***
8. Well oxidation etch
-----------------------
Confidential
*** INDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
47
Wet etch : ***
Microscope inspect
9. Implant oxidation
---------------------
Diffusion preclean
Implant oxidation ***
Step ***
Push in ***
Ramp to ***
Oxidation ***
Oxidation ***
Anneal ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
10. P-Top Mask (CD's measured)
-------------------------------
Microscope inspect
11. Boron P-Top implant
------------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
Microscope inspect
12. P-Top drive
----------------
Diffusion preclean
Step ***
Push in ***
Anneal ***
Ramp to ***
Anneal ***
Ramp to ***
13. Oxide strip
----------------
Confidential
*** INDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
48
Oxide strip : ***
Microscope inspect
14. Regrow oxidation
---------------------
Diffusion preclean
Regrow oxidation ***
Step ***
Push in ***
Ramp to ***
Oxidation ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
15. Nitride deposition
-----------------------
Nitride ***
deposition(LP-
CVD)
Temperature : ***
NH3 : ***
SiH2Cl2 : ***
*Time adjusted as required to maintain specified Nitride thickness.
Visual inspect
16. OD Mask (CD's measured)
----------------------------
Microscope inspect
17. Source/Drain(Active Area) etch
-----------------------------------
Nitride etch (Plasma etcher)
Microscope inspect
Plasma resist Clean
Resist clean : ***
CD's measured
18. Boron field implant Mask (no CD's measured)
------------------------------------------------
Confidential
*** INDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
49
Microscope inspect
19. Oxide etch
---------------
Resist bake : ***
Microscope inspect
Wet etch : ***
Resist bake : ***
20. BF2 field implant
----------------------
Dose : ***
Energy : ***
Specie : ***
21. Boron Punchthrough implant
-------------------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
Microscope inspect
22. Field oxidation
--------------------
Diffusion preclean
Field oxidation ***
Step ***
Push in ***
Anneal ***
Oxidation ***
Ramp to ***
Anneal ***
Ramp to ***
Oxidation ***
Oxidation ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
23. Phosphoric Acid Nitride strip
----------------------------------
Confidential
*** INDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
50
Oxide dip : ***
Phosphoric Acid : ***
strip
Microscope inspect
Oxide dip : ***
Microscope inspect
24. Sacrificial oxidation
--------------------------
Diffusion preclean
Sacrificial oxidation ***
Step ***
Push in ***
Anneal ***
Oxidation ***
Oxidation ***
Oxidation ***
Ramp to ***
Anneal ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
25. Vt implant Mask (no CD's measured)
---------------------------------------
Microscope inspect
26. Boron Gate implant
-----------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
Oxide dip : ***
Microscope inspect
27. Gate oxidation
-------------------
Diffusion preclean
Gate oxidation ***
Step ***
Confidential
*** INDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
51
Push in ***
Anneal ***
Oxidation ***
Oxidation ***
Oxidation ***
Ramp to ***
Anneal ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
28. Poly deposition
--------------------
Polysilicon ***
deposition(LP-CVD)
Temperature : ***
SiH4 : ***
Visual inspect
29. Backside Etch
-----------------
Photoresist spin
Resist bake ***
Backside poly ***
Backside oxide ***
Plasma Resist Clean
Resist Clean ***
30. Poly dope
--------------
Diffusion preclean
Poly dope ***
Step ***
Push in ***
Ramp to ***
Doping ***
Ramp to ***
*Time adjusted as required to maintain specified Poly resistivity.
Visual inspect
Oxide dip : ***
Confidential
*** INDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
52
Cleaning : ***
31. Gate Mask (CD's measured)
------------------------------
Microscope inspect
32. Poly etch
--------------
Plasma Poly etch ***
Microscope inspect
Plasma resist clean
Resist clean : ***
Oxide dip : ***
Microscope inspect
CD's measured
33. Implant oxidation
----------------------
Diffusion preclean
Implant oxidation ***
Step ***
Push in ***
Anneal ***
Oxidation ***
Anneal ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
34. N+ Mask (no CD's measured)
-------------------------------
Microscope inspect
35. Arsenic Source/Drain implant
---------------------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
36. P+ Mask (no CD's measured)
-------------------------------
Microscope inspect
Confidential
*** INDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
53
37. Boron Source/Drain implant
-------------------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist
clean
Resist clean : ***
38. EP Mask (no CD's measured)
------------------------------
Microscope inspect
39. Boron EP implant
---------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
40. Source/Drain re-oxidation
------------------------------
Diffusion preclean
Source/Drain re-oxidation ***
Step ***
Push in ***
Anneal ***
Oxidation ***
Ramp to ***
Anneal ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
41. Glass deposition
---------------------
LTO deposition(LP-CVD) ***
Temperature : ***
SiH4 : ***
MIX gas : ***
O2 : ***
Confidential
*** INDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
54
He : ***
Visual inspect
Scrubber cleaning
42. Densify
------------
Step ***
Push in ***
Ramp to ***
Densify ***
Ramp to ***
43. Contact Mask (CD's measured)
----------------------------------
Microscope inspect
44. Contact etch
------------------
Plasma flush
Resist bake : ***
Microscope inspect
Oxide etch : ***
Resist bake : ***
Oxide thickness measured
Plasma etch (CHF3)
Oxide thickness measured
Microscope inspect
Resist bake : ***
Oxide etch : ***
Plasma resist clean
Resist clean : ***
Microscope inspect
CD's measured
45. AL/Si/Cu Sputter
---------------------
Pre-Sputter clean : ***
Wafer bake : ***
Aluminum : ***
Visual inspect
46. Metal Mask (CD's measured)
-------------------------------
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
55
Microscope Inspect
47. Metal etch
---------------
Resist bake ***
Plasma metal ***
Microscope inspect
Plasma resist clean
Microscope inspect
CD's measured
48. AL sinter
--------------
Step ***
Push in ***
Sinter ***
49. Glass deposition
---------------------
LTO ***
deposition(LP-CVD)
Temperature : ***
SiH4 : ***
MIX gas : ***
O2 : ***
He : ***
Visual inspect
50. Pad Mask (no CD's measured)
--------------------------------
Microscope inspect
51. Pad etch
-------------
Plasma etch (CF4/O2)
Microscope inspect
Plasma resist clean
Microscope inspect
52. Passivation sinter
-----------------------
Step ***
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
56
Push in ***
Sinter ***
53. PIX coating
----------------
PIX-1400 : ***
Bake : ***
54. PIX Mask (no CD's measured)
--------------------------------
Microscope inspect
55. PIX sinter
---------------
Step ***
Push in ***
Sinter ***
56. Backgrind
--------------
Tape coating : ***
Backgrind : ***
Peeling tape off
Water cleaning
STANDARD 400V (50ohm) PROCESS FLOW CHART:
1. Material specification
--------------------------
Crystal type : ***
Resistivity : ***
Thickness : ***
Diffusion : ***
preclean
Etch rate : ***
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
57
2. Blocking oxidation
-----------------------
Diffusion
preclean
Blocking ***
oxidation
Step ***
Push in ***
Anneal ***
Ramp to ***
Oxidation ***
Oxidation ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
3. N-Well Mask (CD's measured)
-------------------------------
Microscope inspect
4. N-Well Etch
---------------
Resist bake : ***
Microscope inspect
Wet etch : ***
Plasma resist clean
Resist clean : ***
CD's measured
5. Well oxidation
------------------
Diffusion preclean
Well oxidation ***
Step ***
Push in ***
Ramp to ***
Oxidation ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
6. Phosphorus N-Well implant
-----------------------------
Dose : ***
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
58
Energy : ***
Specie : ***
Cleaning : ***
7. N-Well drive
----------------
Diffusion
preclean
Step ***
Push in ***
Ramp to ***
Anneal ***
Ramp to ***
8. Well oxidation etch
-----------------------
Wet etch : ***
Microscope inspect
9. Implant oxidation
---------------------
Diffusion preclean
Implant oxidation ***
Step ***
Push in ***
Ramp to ***
Oxidation ***
Oxidation ***
Anneal ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
10. P-Top Mask (CD's measured)
------------------------------
Microscope inspect
11. Boron P-Top implant
------------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
59
Resist clean : ***
Microscope inspect
12. P-Top drive
----------------
Diffusion preclean
Step ***
Push in ***
Anneal ***
Ramp to ***
Anneal ***
Ramp to ***
13. Oxide strip
----------------
Oxide strip : ***
Microscope inspect
14. Regrow oxidation
---------------------
Diffusion preclean
Regrow oxidation ***
Step ***
Push in ***
Ramp to ***
Oxidation ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
15. Nitride deposition
-----------------------
Nitride ***
deposition(LP-CVD)
Temperature : ***
NH3 : ***
SiH2Cl2 : ***
*Time adjusted as required to maintain specified Nitride thickness.
Visual inspect
16. OD Mask (CD's measured)
-----
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
60
Microscope inspect
17. Source/Drain(Active Area) etch
------------------------------------
Nitride etch (Plasma etcher)
Microscope inspect
Plasma resist Clean
Resist clean : ***
CD's measured
18. Boron field implant Mask (no CD's measured)
------------------------------------------------
Microscope inspect
19. Oxide etch
---------------
Resist bake : ***
Microscope inspect
Wet etch : ***
Resist bake : ***
20. BF2 field implant
----------------------
Dose : ***
Energy : ***
Specie : ***
21. Boron Punchthrough implant
-------------------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
Microscope inspect
22. Field oxidation
--------------------
Diffusion preclean
Field oxidation ***
Step ***
Push in ***
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
61
Anneal ***
Oxidation ***
Ramp to ***
Anneal ***
Ramp to ***
Oxidation ***
Oxidation ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
23. Phosphoric Acid Nitride strip
----------------------------------
Oxide dip : ***
Phosphoric Acid : ***
strip
Microscope inspect
Oxide dip : ***
Microscope inspect
24. Sacrificial oxidation
--------------------------
Diffusion preclean
Sacrificial ***
oxidation
Step ***
Push in ***
Anneal ***
Oxidation ***
Oxidation ***
Oxidation ***
Ramp to ***
Anneal ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
25. Vt implant Mask (no CD's measured)
----------------------------------------
Microscope inspect
26. Boron Gate implant
-----------------------
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
62
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
Oxide dip : ***
Microscope inspect
27. Gate oxidation
-------------------
Diffusion
preclean
Gate oxidation ***
Step ***
Push in ***
Anneal ***
Oxidation ***
Oxidation ***
Oxidation ***
Ramp to ***
Anneal ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
28. Poly deposition
--------------------
Polysilicon ***
deposition(LP-CVD)
Temperature : ***
SiH4 : ***
Visual inspect
29. Backside Etch
-----------------
Photoresist spin
Resist bake ***
Backside poly ***
Backside oxide ***
Plasma Resist Clean
Resist Clean ***
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
63
30. Poly dope
--------------
Diffusion
preclean
Poly dope ***
Step ***
Push in ***
Ramp to ***
Doping ***
Ramp to ***
*Time adjusted as required to maintain specified Poly resistivity.
Visual inspect
Oxide dip : ***
Cleaning : ***
31. Gate Mask (CD's measured)
-----------------------------
Microscope inspect
32. Poly etch
--------------
Plasma Poly etch ***
Microscope inspect
Plasma resist clean
Resist clean : ***
Oxide dip : ***
Microscope inspect
CD's measured
33. Implant oxidation
----------------------
Diffusion preclean
Implant oxidation ***
Step ***
Push in ***
Anneal ***
Oxidation ***
Anneal ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
34. N+ Mask (no CD's measured)
-------------------------------
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
64
Microscope inspect
35. Arsenic Source/Drain implant
---------------------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
36. P+ Mask (no CD's measured)
-------------------------------
Microscope inspect
37. Boron Source/Drain implant
-------------------------------
Dose : ***
Energy : ***
Specie : ***
Plasma resist clean
Resist clean : ***
38. Source/Drain re-oxidation
-------------------------------
Diffusion
preclean
Source/Drain ***
re-oxidation
Step ***
Push in ***
Anneal ***
Oxidation ***
Ramp to ***
Anneal ***
Ramp to ***
*Time adjusted as required to maintain specified oxide thickness.
Visual inspect
39. Glass deposition
---------------------
LTO ***
deposition(LP-CVD)
Temperature : ***
SiH4 : ***
MIX gas : ***
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
65
O2 : ***
He : ***
Visual inspect
Scrubber cleaning
40. Densify
------------
Step ***
Push in ***
Ramp to ***
Densify ***
Ramp to ***
41. Contact Mask (CD's measured)
----------------------------------
Microscope inspect
42. Contact etch
------------------
Plasma flush
Resist bake : ***
Microscope inspect
Oxide etch : ***
Resist bake : ***
Oxide thickness measured
Plasma etch (CHF3)
Oxide thickness measured
Microscope inspect
Resist bake : ***
Oxide etch : ***
Plasma resist clean
Resist clean : ***
Microscope inspect
CD's measured
43. AL/Si/Cu Sputter
----------------------
Pre-Sputter clean : ***
Wafer bake : ***
Aluminum : ***
Visual inspect
44. Metal Mask (CD's measured)
--------------------------------
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
66
Microscope inspect
45. Metal etch
---------------
Resist bake : ***
Plasma metal
etch on PE8300 using BCl3
Microscope inspect
Plasma resist clean
Microscope inspect
CD's measured
46. AL sinter
--------------
Step ***
Push in ***
Sinter ***
47. Glass deposition
----------------------
LTO deposition(LP-CVD ***
Temperature : ***
SiH4 : ***
MIX gas : ***
O2 : ***
He : ***
Visual inspect
48. Pad Mask (no CD's measured)
----------------------------------
Microscope inspect
49. Pad etch
-------------
Plasma etch (CF4/O2)
Microscope inspect
Plasma resist clean
Microscope inspect
50. Passivation sinter
-----------------------
Step ***
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
67
Push in ***
Sinter ***
51. PIX coating
----------------
PIX-1400 : ***
Bake : ***
52. PIX Mask (no CD's measured)
----------------------------------
Microscope inspect
53. PIX sinter
----------------
Step ***
Push in ***
Sinter ***
54. Backgrind
--------------
Tape coating : ***
Backgrind : ***
Peeling tape off
Water cleaning
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
00
Xxxxxxxx X
PI's Patents
------------
High Voltage MOS transistors USA 4,811,075
European (designated France, 0295391
Germany, Great Britain,
Italy, Netherlands, Sweden)
Regulated Flyback Converter with Spike Suppressing USA 5,008,794
Coupled Inductors
Self Powering Technique for Integrated Switched Mode USA 5,014,178
Power Supply
Japan 2044690
Temperature-Compensated Integrated Circuit for Uniform USA 5,038,053
Current Generation
Pulse Width Modulator Control Circuit USA 5,045,800
MOS Grated Bipolar Transistor USA 5,072,268
Japan 1937954
High Frequency Switched Mode Converter USA 5,161,098
Low Cost High Frequency Switched Mode Converter
& Method For Making Same Taiwan 56268
Low Noise Voltage Regulator Using A Gated Single Ended USA 5,164,891
Oscillator
Below Ground Current Sensing with Current Input to USA 5,245,526
Control Threshold
Semiconductor Device w/ Improved Breakdown Voltage USA 5,258,636
Characteristics
Dual Threshold Differential Discriminator USA 5,274,274
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
69
European (designated France, 0562397
Germany, Great Britain,
Italy, Netherlands, Sweden)
High Voltage Transistor USA 5,274,259
Power MOSFET Safe Operating Area Current Limiting Device USA 5,282,107
European (designated France, 0585847
Germany, Great Britain,
Italy, Netherlands, Sweden)
Linear Load Circuit to Control Switching Power Supplies USA 5,285,367
Under Minimum Load Conditions
Switched Mode Power Supply Integrated Circuit with USA 5,285,369
Start-up Self-Biasing
European (designated France, 0585788
Germany, Italy,
Netherlands, Sweden, UK)
High Voltage MOS Transistor With A Low On-Resistance USA 5,313,082
Three Terminal Switched Mode Power Supply Integrated USA 5,313,381
Circuit
European (designated France, 0585789
Germany, Italy,
Netherlands, Sweden, UK)
Bi- Directional MOSFET Switch USA 5,323,044
Method of Making High Voltage Transistor USA 5,411,901
Power Factor Correction Pre-compensation Circuit USA 5,461,303
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
70
Plastic Quad Packaged Switch with Mode Integrated USA 5,469,334
Circuit Transformer Winding and Moldings for
Transformer Core Pieces
Low-Cost High-Voltage Flyback Power Supply USA 5,602,724
Coupled inductor power supply with reflected feedback USA 5,973,945
regulation circuitry
Two switch off-line switching converter USA 5,982,639
Two switch off-line switching converter USA 6,005,781
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
71
Appendix C
MEC's Patents
-------------
-------------------------------------------------------------------------------------------------
Title Open No Patent No Patent No
(Japan) (Japan) (USA)
-------------------------------------------------------------------------------------------------
Semiconductor *** ***
Apparatus
-------------------------------------------------------------------------------------------------
Semiconductor *** ***
Apparatus
-------------------------------------------------------------------------------------------------
Semiconductor *** ***
Apparatus
-------------------------------------------------------------------------------------------------
Semiconductor *** ***
Apparatus
-------------------------------------------------------------------------------------------------
Semiconductor *** ***
Apparatus
-------------------------------------------------------------------------------------------------
Semiconductor *** ***
Apparatus and igniter With it
-------------------------------------------------------------------------------------------------
Semiconductor *** ***
Apparatus
-------------------------------------------------------------------------------------------------
Semiconductor *** ***
Apparatus
-------------------------------------------------------------------------------------------------
Semiconductor *** ***
Apparatus and Manufacturing method
-------------------------------------------------------------------------------------------------
Semiconductor *** ***
Apparatus
-------------------------------------------------------------------------------------------------
Semiconductor *** ***
Apparatus
-------------------------------------------------------------------------------------------------
Semiconductor *** ***
Apparatus
-------------------------------------------------------------------------------------------------
Semiconductor *** ***
Apparatus
-------------------------------------------------------------------------------------------------
Constant Current Circuit *** ***
-------------------------------------------------------------------------------------------------
Semiconductor *** ***
Apparatus
-------------------------------------------------------------------------------------------------
Semiconductor *** ***
Apparatus
-------------------------------------------------------------------------------------------------
Electro Luminescence *** ***
Drive Apparatus
-------------------------------------------------------------------------------------------------
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
72
Confidential
*** IDENTIFIES REDACTED MATERIAL WHICH HAS BEEN DELETED PURSUANT TO A REQUEST
FOR CONFIDENTIAL TREATMENT AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION.
73
