Working Capital Loan Contract (2016 Edition)
Exhibit 10.27
No.:0410000286-2018 (Xiang’an) No. 00287___________________________________________________________________
[seal:]
(2016 Edition)
[seal:]
Special Note: The Contract is negotiated by the lender and the borrower on an equal and voluntary basis.
All contract terms are true representations of the parties’ intentions. To protect the legitimate rights and interests of the Borrower, the Lender specifically invites the Borrower to take full notice of the full terms and conditions of the
parties, in particular, the contents in bold.
Lender: Industrial and Commercial Bank of China Limited Xiamen Xiang’an Branch
Principal:
Domicile (Address): Postal
Code:
Borrower:
Legal Representative:
Contact: Mobile No.:
Domicile (Address): Postal Code:
Telephone: Fax: Email:
[Please ensure that the Borrower fills in the
above information accurately and completely to ensure the timely delivery of relevant notices and legal documents.]
Through equal negotiations, a consensus has been reached and the Contract has been entered into on the matters of the Lender’s
issuance of lending to the Borrower.
Section 1 General Stipulations
Article 1 Loan Purpose
Loans under the Contract shall be used for the following purpose; without the written consent of the Lender, the Borrower
shall not misuse any loans. The Lender is entitled to supervision of the use of funds.
Loan Purpose: VAT Payment
Article 2 Lending Amount and Term
2.1 The currency of the
contract is the RMB , and the amount is 1600000.00 (in words: One million and six hundred thousand yuan) (where the figure and the amount in words is not the same, the amount in words shall prevail).
2.2 The lending term under
the Contract is 36 months , from the actual withdrawal date (for multiple withdrawals, from the first withdrawal date); the actual withdrawal date shall be
based on the loan receipt.
Article 3 Interest Rates, Interest, and Fees
3.1 [Method for determining the RMB lending rate]
The RMB lending rate is determined according to the following method (3) (1/2/3/4) below:
(1) Fixed interest rate, at
an annual interest rate of / %, with the interest rate remaining unchanged for the duration of the Contract.
(2) The lending rate is
determined by the benchmark interest rate plus a floating range, wherein the benchmark interest rate is the benchmark lending rate of the People’s Bank of China on / (withdrawal
date/ effective date of the Contract) that corresponds to the lending term stipulated in Article 2.2, and the floating range is /(upward/downward/zero) / %. After the Borrower makes a withdrawal, the lending rate will remain the same for a period of / (1/3/6/12) month(s), to be adjusted once a period, with interest accounted for in segments. The date for determining the interest rate for the second
period shall be the date that corresponds to the withdrawal date at the end of the first period; should the given month not have the given date that corresponds to the withdrawal date, the corresponding date shall be the last day of the given
month, and the same shall hold true for other periods. Should the Borrower make withdrawals in installments, the lending rate shall be adjusted according to method /
(A/B) listed below:
A. Regardless of the number
of withdrawals during a single period, the current lending rate determined on the date on which the interest rate for the current period shall be used, to be adjusted at the next period.
B. The lending rate shall
be determined and adjusted for each withdrawal.
(3)The lending rate for
each withdrawal shall be determined based on the benchmark interest rate plus the floating range, wherein the benchmark interest rate shall be the annual
(annual/monthly) loan promotion rate (LPR) by the National Interbank Funding Center published on the business day prior to the withdrawal date (withdrawal
date/effective date of the contract) for the current withdrawal, and the floating range shall be / (upward/downward/zero) / % or plus (plus/less/zero) 67.75 base points (with one base point being 0.01%). The lending rate after each withdrawal shall be adjusted according to method __(A/B)
listed below:
A. For a period of 1 (1/3/6/12) month(s), to be adjusted once a period, with interest accounted for in segments. The benchmark interest rate adjustment date for the second period
shall be the date that corresponds to the withdrawal date at the end of the first period; should the given month not have the given date that corresponds to the withdrawal date, the corresponding date shall be the last day of the given month.
Should the National Interbank Funding Center not have published a loan benchmark interest rate for the corresponding term on the previous business day, the loan benchmark interest for the corresponding term published on the last business day
shall prevail, and so on and so forth.
B. The lending rate shall
not be adjusted for the entire lending term.
(4) Other: /
3.2 [Method for determining the foreign exchange lending rate]
The foreign exchange lending rate shall be determined according to method / listed below:
(1) Fixed interest rate, at
an annual interest rate of / %, with the interest rate remaining unchanged for the duration of the Contract.
(2) Floating interest rate,
with the lending rate a floating interest rate composted of the spread of the / -month / (LIBOR/HIBOR) as the benchmark interest rate plus / base points (one base point is 0.01%). The spread will remain unchanged
during the Contract term. Should withdrawals be made in installments, the interest rate shall be calculated for each withdrawal. After the Borrower makes a withdrawal, the benchmark interest rate shall be adjusted according to method / listed below, with interest accounted for in segments:
A. For a period of / (1/3/6/12) month(s), to be adjusted once a period. The benchmark interest rate adjustment date for the second period shall be the date that corresponds to the
withdrawal date at the end of the first period; should the given month not have the given date that corresponds to the withdrawal date, the corresponding date shall be the last day of the given month, and the same shall hold true for other
periods.
B. The benchmark interest
rate shall be adjusted on the first day of each interest-bearing period.
(3)Other: /
3.3 Interest shall be
calculated on lending under the Contract on a daily basis from the withdrawal date and settled every month (month/quarter/six months). Interest shall be
settled with principal when loans are due, and the daily interest rate = annual interest rate/360.
3.4 The penalty interest
rate for overdue payments under the Contract shall be determined at 30 % of the original lending rate, and the penalty interest rate for misuse of loans
shall be determined at 50 % of the original lending rate.
3.5 In addition to
interest, the Borrower shall also pay a commitment fee to the Lender. The commitment fee shall be the difference between the amount of lending stipulated in Article 2 and the Borrower’s withdrawals (the daily average balance during the billing
period) and an annual rate of / %, to be paid according to
method / below:
(1) A single payment shall be made to the Lender on the last day of the billing period.
(2) After the Contract enters into force, payments shall be made in installments to the Lender on the 20th day of every / (month/quarter/six months) up until the last day of the billing period.
Should loans under the Contract be on a revolving basis, the billing period refers to the time limit on the use of credit for
revolving loans; should loans under the Contract not be on a revolving basis, the billing period refers to the period between the signing date of the Contract and the withdrawal date of the last loan as stipulated in Article 4.
The commitment fee is paid in installments; should the Borrower fail to pay the commitment fee on time, the
Lender is entitled to the suspension of the issuance of loans or to cancel all amounts that the Borrower has not withdrawn.
Article 4 Withdrawals(Revolving Loans are Not Applicable)
4.1 The Borrower shall make withdrawals according to method (1) (1/2/3)listed below according to actual funding needs:
(1) One-time loan request prior to 12/14/2018;
(2) One or more loan requests after
the Contract’s effective date and before / /;
(3) Withdrawals in installments on
the dates below; the Borrower may, with the Lender’s consent, make changes to withdrawal dates or amounts based on funding needs, though the Borrower must make loan requests no later than //.
|
Withdrawal Date
|
Withdrawal Amount
|
|
/
|
/
|
|
/
|
/
|
|
/
|
/
|
4.2 Should the Borrower fail to make withdrawals as agreed, the Lender is entitled to cancel, in part or in
full, lending that the Borrower has not yet withdrawn.
Article 5 Repayments
5.15.1 The Borrower shall
repay loans under the Contract according to method (2) (1/2) listed below:
(1) One-time loan
repayment upon expiration.
(2) According to the
following repayment plan (when there is additional content, additional pages can be attached):
|
Planned Repayment Date
|
Planned Repayment Amount
|
||
|
05-20-2019
|
16000.00 yuan
|
||
|
11-20-2019
|
64000.00 yuan
|
||
|
05-20-2020
|
80000.00 yuan
|
||
|
11-20-2020
|
160000.00 yuan
|
||
|
05-20-2021
|
160000.00 yuan
|
||
|
11-05-2021
|
1120000.00 yuan
|
5.2 For lending under the Contract under the following circumstances, the Borrower shall not be required
to pay the early repayment penalty in case the loan is returned immediately after the corresponding funds are in place, thus resulting in early repayment:
/
/
5.3 Apart from the circumstances stipulated in Article 5.2, should loans be repaid early, the Borrower shall pay an early repayment penalty to the Lender, with
the early repayment penalty calculated according to the following criteria: early repayment amount × remaining lending term (months) × / %; if the remaining lending term is less than one
month, the period shall be calculated as one month.
Article 6 Special Agreements on
Revolving Loans (Optional clause; this Article □ is applicable ■ is not applicable)
6.1 Loans under the
Contract may be used on a revolving basis, and the lending amount and lending periods in Article 2 above shall be the revolving loan credit line and revolving loan credit term, wherein the revolving loan credit term is calculated from the
effective date of the Contract.
6.2 RMB revolving loans
are determined using the benchmark lending rate published by the People’s Bank of China plus the floating range, and the benchmark lending rate is determined based on the benchmark lending rate of the People’s Bank of China that corresponds to
the grade of each lending term.
Article 7 Guarantees
The loan guarantee under the Contract is the maximum guarantee, and the corresponding maximum guarantee contract is as follows
____/____(1/2/3, select as many as applicable ):
(1) Maximum Guarantee Contract Name: / (No.: / )
Guarantor: /
(2) Maximum Mortgage Contract Name: / (No.: / )
Mortgager: /
(3) Maximum Pledge Contract Name: / (No.: / )
Xxxxxxx: /
Article 8 Financial Agreement (Optional clause; this Article □ is applicable ■ is not applicable)
For the duration of the Contract, the Borrower shall be subject to the following financial metrics:
/
/
Article 9 Dispute Resolution
The dispute resolution method under the Contract is (1) (1/2) :
(1) The dispute shall be submitted to the Xiamen Arbitration Commission, subject to the arbitration rules effective at the time in which the application for arbitration is submitted for arbitration in Xiamen (arbitral place). The arbitral award is final and binding upon the parties.
(2) The dispute shall be resolved through litigation in the court of the Lender’s location.
Article 10 Miscellaneous
10.1 The Contract is in 2 duplicates, with the Borrower, Lender, and , / , each holding one original, each of equal legal effect.
10.2 The following
attachments and other attachments mutually agreed upon by the parties shall constitute an integral part of the Contract and have the same legal effect as the Contract:
Attachment 1: Withdrawal Notice (Format)
Attachment 2: Entrusted Payment Agreement
Attachment 3: /
Article 11 Other Matters of Agreement
11.1 The arbitral ruling is final and binding on
both parties. The parties agree that the arbitration shall be conducted after the arbitration has been filed; the relevant legal documents (including the arbitration documents) shall be deemed to have been served on the day following mailing
to the mailing addresses of the parties as recorded in the Contract.
11.2 The Borrower shall disclose related party
relationships and related party transactions to the Lender in a timely, comprehensive, and accurate manner; the total amount of financing that the Borrower applies to the Lender for shall not exceed the actual funding needs of Party B. Should
the Borrower violate any of the stipulations in the two foregoing paragraphs, the Lender is entitled to take the breach of contract remedy measures as stipulated in this agreement.
11.3 Without the consent of the Lender, the
Borrower shall not provide any guarantees or warranties to others or be deemed as in breach of contract, wherein the Lender is entitled to withdraw financing in advance.
11.4 Without the written consent of the Lender,
the Borrower shall not set up mortgages (pledges) on or provide guarantees or warranties for assets that it effectively operates.
11.5 The Borrower shall regularly submit reports
to the Lender on external guarantees and promise that such information on external guarantee amounts is complete, true, and accurate.
11.6 When the Borrower’s financial metrics
during the existence of lending are inferior to those previously agreed to by the Lender (if any), the Lender is entitled to declare that the loan expire in advance, to suspend the issuance of unissued funds, to require that the Borrower
repay some or all of the loans already issued, or to require that the Borrower provide a legal and valid guarantee as recognized by the Lender.
Section 2 Specific Stipulations
Article 1 Interest Rate and Interest
1.1 For foreign currency
borrowing, LIBOR is the interbank interest rate for the lending currency under the Contract displayed on the Reuters financial telecommunications terminal “LIBO=“ page two banking days (11: 00 am London time) prior to the withdrawal date or
benchmark interest rate adjustment date; HIBOR is the interbank interest rate for the lending currency under the Contract displayed on the Reuters financial telecommunications terminal “HIBO=“ page two banking days (11: 15 am Hong Kong time)
prior to the withdrawal date or benchmark interest rate adjustment date.
1.2 Should a floating
interest rate be used for loans under the Contract, the original interest rate shall still be used for interest on overdue loans.
1.3 Should loan interest
be settled on a monthly basis, the settlement date shall be the 20th of each month; should interest be settled quarterly, the settlement date shall be the 20th day of the last month of each quarter; should interest be settled semi-annually, the
settlement date shall be June 20 or December 20 of each year.
1.4 The first
interest-bearing period shall be from the actual date of withdrawal to the first settlement date; the last interest-bearing period shall be from the day after the end of the previous interest-bearing period to the final payment date; all other
interest-bearing periods shall be from the date after the end of the previous interest-bearing period to the next settlement date.
1.5 Loan Interest = Loan Principal × Daily Interest Rate × Actual Days of Use. Should the equal principal
and interest repayment method be adopted, the formula for calculating the principal and interest shall be as follows:
|
Total Principal and Interest Per Period =
|
Loan Principle x Period Profit x (1 + Period Profit) Number of Repayment Installments
|
||
|
(1 + Period Profit) Number of Repayment Installments
- 1
|
1.6 Should the People’s Bank of China adjust its measures for determining loan interest rates applicable to
lending under the Contract, the relevant rules of the People’s Bank of China shall be adopted, and the Lender shall not provide separate notice thereof to the Borrower.
1.7 The lending rate determined at the signing of the Contract may float downward to a certain degree from
the relevant loan benchmark interest rate published by the People’s Bank of China or the loan prime rate (LPR) published by the National Interbank Funding Center. The Lender is entitled to re-evaluate the Borrower’s interest rate concessions each
year and determine whether to cancel, in part or in full, the interest rate concessions granted to the Borrower, based on national policies, the Borrower’s credit standing, lending guarantee changes, and other such circumstances, and promptly
notify the Borrower of such a cancellation.
Article 2 Loan Issuances and Payments
2.1 The Borrower must
meet the following withdrawal preconditions in order to withdraw loans, otherwise the Lender is not obligated to issue any funds to the Borrower, unless the Lender has agreed to such an issuance in advance:
(1) Apart from credit
loans, the Borrower has provided corresponding guarantees as required by the Lender and has completed relevant guarantee procedures;
(2) There has been no
breach of contract under the Contract or other contracts with the Lender;
(3) The proof of loan
usage provided is consistent with the intended use.
(4) Other materials are
submitted as required by the Lender.
2.2 Written documents
provided to the Lender by the Borrower at the time of withdrawal must be originals; if originals cannot be provided, with the Lender’s consent, photocopies affixed with the Borrower’s corporate seal may be provided.
2.3 The Borrower must
provide the Lender with a withdrawal notice at least five banking days in advance of a withdrawal. Once the withdrawal notice has been submitted, it cannot be revoked without the written consent of the Lender.
2.4 Once the Borrower
has met the withdrawal preconditions or the Lender has agreed to issuance in advance, the Lender shall transfer the loan to the Borrower’s designated account, meaning that the Lender has issued the loan to the Borrower as stipulated under the
Contract.
2.5 Pursuant to relevant
regulatory requirements and the Lender’s administrative requirements, lending exceeding a certain amount or meeting certain conditions shall be made with a Lender’s entrusted payment, whereby the Lender pays the loan amount to payment objects
that comply with the usage stipulated under the Contract based on the Borrower’s withdrawal application and payment entrustment. To this end, the Borrower shall enter into a separate entrusted payment agreement with the Lender as an attachment to
the Contract and open or designate an account at the Lender for entrusted payments.
Article 3 Repayments
3.1 The Borrower shall
repay the principal, interest and other payables in full and on time as stipulated under the Contract. One banking day prior to the repayment date and each settlement date, the Borrower shall deposit enough in its repayment account opened at the
Lender for the current interest, principal, and other payables, and the Lender is entitled to actively collect payment there from on the repayment date or settlement date, or ask that the Borrower comply with relevant transfer procedures. Should
the amount in the repayment account be insufficient to pay all payables due, the Lender has the right to determine the order of payment.
3.2 Should the Borrower
apply to repay loans early, in part or in full, the Borrower shall submit a written application to the Lender 10 banking days in advance and pay the early repayment penalty to the Lender according to the standards stipulated under the Contract.
3.3 Should the Lender agree
to an early repayment, on the early repayment date, the Borrower shall also settle loan principal, interest, and other payments due as of the early repayment date, as stipulated under the Contract.
3.4 The Lender is entitled to withdraw lending in advance based on the Borrower’s capital returns.
3.5 Should the actual loan period be shortened because of the Borrower’s early repayment or because the
Lender withdraws the loan in advance as stipulated under the Contract, the corresponding interest rate grade shall not be adjusted, and the original lending rate shall still be used.
Article 4 Revolving Loans
4.1 Should loans under the
Contract be used on a revolving basis, during the revolving credit term, the sum of the Borrower’s loan balance at any time should not exceed the revolving line of credit; the lending term for each of the Borrower’s withdrawals shall be from the
actual withdrawal date to the stipulated repayment date, as recorded on the lending receipt. The repayment date of any single withdrawal shall not exceed the revolving credit term.
4.2 Should loans under the
Contract be used on a revolving basis, from the signing date of the Contract, should the Borrower make no withdrawals for three consecutive months, the Lender has the right to cancel the revolving line of credit.
Article 5 Guarantees
5.1 Apart from credit
loans, the Borrower shall provide legal and valid guarantees recognized by the Lender for its performance of obligations under the Contract. A guarantee contract shall be separately signed.
5.2 Should the
collateral under the Contract be damaged, devalued, subject to an ownership dispute, seized or withheld, or should the mortgager dispose of the collateral without authorization, or should the financial situation of the guarantor adversely change
or change in a way that is not conducive to the Lender’s claims, the Borrower shall promptly notify the Lender and provide additional guarantees as recognized by the Lender.
5.3 The Lender is entitled to periodically or irregularly reassess the value of the collateral and the
guarantor’s ability to guarantee. Should the assessment hold that the value of the collateral has declined or that the guarantor’s ability to guarantee has declined, the Borrower shall provide additional guarantees equal to the reduced value or
the reduced ability to guarantee and may provide other guarantees as recognized by the Lender.
5.4 Should pledge
guarantees for receivables be provided for loans under the Contract, for the duration of the Contract, in any one of the following circumstances, the Lender has the right to declare the early expiration of lending, require that the Borrower
immediately repay loan principal and interest, in part or in full, or add additional legal, valid, and sufficient guarantees recognized by the Lender:
(1) The accounts
receivable xxxxxxx’x bad debt rate on the payer’s accounts receivable has increased for two consecutive months;
(2) The accounts
receivable xxxxxxx’x accounts receivable for the payer that are overdue and have yet to be received account for over 5% of the payer’s balance of accounts receivable;
(3) The accounts
receivable xxxxxxx has entered into a trade dispute (including but not limited to quality, technology, or service disputes) or claims dispute with the payer or another third party, such that the accounts receivable may not be payable on time.
Article 6 Account Management
6.1 The Borrower shall
use a special designated capital returns account with the Lender to collect corresponding sales income or planned repayment funds. Should corresponding sales income be settled in a non-cash manner, the Borrower shall ensure that the funds are
returned to the account promptly after payment is received.
6.2 The Lender is entitled
to the supervision of the capital returns account, including but not limited to inquiries and supervision of the account’s capital debits and credits, and the Borrower shall cooperate. If required by the Lender, the Borrower shall sign a special
account supervision agreement with the Lender.
Article 7 Representations and Warranties
The Borrower makes the following representations and warranties to the Lender, which shall be valid for
the duration of the Contract:
7.1 The Borrower has the
qualifications for borrowing and the qualifications and ability to sign and perform the Contract.
7.2 All necessary
authorizations or approvals have been obtained for signing the contract, and the signing and performance of the contract do not violate the provisions of the company’s articles of incorporation or relevant laws and regulations and do not conflict
with obligations under other contracts.
7.3 Other debts payable
have been paid on time, with no malicious defaults on bank loans or interest.
7.4 There are sound
organizations and financial management systems in place. In the past one year, there have been no major disciplinary violations or unlawful conduct, and current senior management have no significantly negative records.
7.5 All documents and
materials provided to the Lender are true, accurate, complete, and valid, and they are free of false records, material omissions, or misleading statements.
7.6 Financial accounting
reports provided to the Lender have been prepared in accordance with PRC accounting standards, reflecting the Borrower’s operating conditions and liabilities in a true, fair, and complete manner. Since the latest financial accounting report, the
Borrower’s financial position has not experienced any significantly adverse changes.
7.7 No litigation,
arbitration, or claims have been concealed from the Lender.
Article 8 Borrower Commitments
8.1 To withdraw and use loans according to the terms and purposes stipulated under the Contract and to not use the borrowings for fixed assets, equity, and other
investments and to ensure that borrowings, in any form, do not flow into the securities market, futures market, or other uses prohibited or restricted by relevant laws and regulations.
8.2 To settle loan
principal, interest, and other payables as stipulated under the Contract.
To accept and actively cooperate with the Lender’s accounts analysis inspection and supervision of the
use of loan funds, including by means of account analysis, document inspection, and on-site investigations, and to regularly report the use of loan funds as required by the Lender.
8.4 To accept the Lender’s
credit checks, to provide financial accounting materials, such as balance sheets and income and loss statements, and other materials reflecting the Borrower’s solvency, as required by the Lender, and to assist and cooperate with the Lender’s
investigations, inquiries, and supervision of its productions, operations, and financial standing.
8.5 To not distribute dividends or bonuses, in any form, when there are outstanding loan principal,
interest, or other payables (including amounts that are announced as due immediately) under the Contract.
8.6 To first obtain the Lender’s written consent or to make arrangements that satisfy the Lender prior to
Mergers, divisions, capital reductions, equity changes, equity pledges, transfers of major assets and claims, major foreign investments, substantial increases in debt financing, and other actions that may adversely affect the Lender’s equity.
8.7 In any one of the
following events, to promptly notify the Lender:
(1) changes to the company’s
articles of incorporation, business scope, registered capital, or legal representative;
(2) closure, dissolution,
liquidation, suspension of business, business license suspended or revoked for rectification, or the company applies (is subject to) bankruptcy;
(3) involvement or
possible involvement in major economic disputes, litigation, or arbitration, or property is seized, detained or under supervision by law;
(4) shareholder(s),
director(s), and current senior management are suspect of major cases or economic disputes.
8.8 To promptly,
comprehensively, and accurately disclose of related party relationships and related party transactions to the Lender.
8.9 To mail or otherwise
send to the Lender and promptly receive various notices.
8.10 To not dispose of its
own assets in a manner that reduces solvency; to not use assets formed under the Contract, without obtaining the Lender’s consent, to provide guarantees to third parties.
8.11 If borrowing under the
Contract is issued as credit, to completely, truthfully, and accurately report routinely to the Lender on external guarantees and, as required by the Lender, sign an account supervision agreement; when external guarantees may affect performance
of obligations under the contract, the Lender’s written consent must be obtained.
8.12 To bear expenses generated by the Lender to realize claims under the Contract, including but not limited to attorneys’ fees and auction fees.
8.13 To give priority to the
Borrower’s debts to its shareholders in terms of the priority for settling debts under the Contract and to at least give such debts an equal footing as other similar debts of the Borrower’s other creditors.
8.14 To strengthen environmental and social risk management and accept the Lender’s supervision and
inspections in this regard. If required by the Lender, to submit environmental and social risk reports to the Lender.
Article 9 Lender Commitments
9.1 To issue loans to
the Borrower as stipulated under the Contract.
9.2 To keep confidential
non-public materials and information provided by the Borrower, unless laws and regulations require otherwise or the Contract stipulates otherwise.
Article 10 Breach of Contract
10.1 Any one of the
following events shall constitute breach of contract by the Borrower:
(1) the Borrower fails
to repay loan principal, interest, or other payables under the Contract according to stipulations under the Contract or acts contrary to representations, warranties, or commitments under the Contract;
(2) changes occur to
guarantees under the Contract that are not conducive to the Lender’s claims, and the Borrower fails to provide other guarantees recognized by the Lender;
(3) the Borrower is
unable to settle any other debts due (including debts declared due early) or fails to perform or violates obligations under other agreements, such that it has affected or may affect its performance of obligations under the Contract;
(4) the Borrower’s
financial metrics, such as profitability, solvency, operating capacity, and cash flow, fail to meet agreed standards, or the deterioration thereof has affected or may affect the performance of its obligations under the Contract;
(5) the Borrower’s
equity structure, production, operations, and foreign investments have undergone significantly adverse changes that have affected or may affect the performance of its obligations under the Contract;
(6) the Borrower is
involved in or may be involved in major economic disputes, litigation, arbitration, or assets have been seized, detained or enforced, or is being investigated or dealt with by judicial or administrative organs in accordance with the law or
subject to penalties in accordance with the law, or is exposed by the media for violating relevant state regulations or policies, such that it has affected or may affect the performance of its obligations under the Contract;
(7) the Borrower’s main
investors and key management personnel make abnormal changes, go missing, or are investigated or restricted by judicial authorities in accordance with the law, such that it has affected or may affect the performance of its obligations under the
Contract;
(8) the Borrower
utilizes false contracts with related parties, utilizes transactions without actual trading to obtain funding or credit from the Lender, or intentionally evades the Lender’s claims through related transactions;
(9) the Borrower has or
may be closed, dissolved, liquidated, have its business suspended, have its business license rectified or revoked, or apply for (or be subject to) bankruptcy;
(10) the Borrower has a
liability incident or a major environmental or social risk incident for food safety, safety production, or environmental protection violations or violation other environmental or social risk management laws, regulations, or industry standards,
such that it has affected or may affect the performance of its obligations under the Contract;
(11) if borrowing under
the Contract is issued as credit, the Borrower’s credit rating, profitability, asset-liability ratio, cash flow from operating activities, or other metrics do not meet the Lender’s conditions for credit lending; or the Borrow sets up
pledge/mortgage guarantees for others or provides guarantees using its validly operated assets without the written consent of the Lender, such that it has affected or may affect the performance of its obligations under the Contract;
(12) Other circumstances
that may adversely affect the Xxxxxx’s realization of claims under the Contract.
10.2 Should the Borrower breach the Contract, the Lender is entitled to take one or more of the following remedies:
(1) to require that the Borrower rectify the breach of contract within a period of time;
(2) to suspend the issuance of loans or other financing to the Borrower based on the Contract or other
contracts between the Lender and the Borrower and cancel, in part or in full, loans or other financing that the Borrower has yet to withdraw;
(3) to announce immediate expiration of lending or other financing under the Contract and other contracts
between the Lender and the Borrower and to immediately recover unpaid amounts;
(4) to require that the Borrower compensate for losses suffered by the Lender from the breach of
contract;
(5) other remedies provided by laws or regulations, as stipulated under the Contract, or as deemed
necessary by the Lender.
10.3 For loans due yet
unpaid by the Borrower as agreed (including debts that are announced as due immediately), the Lender is entitled to charge penalty interest from the date at the overdue penalty interest rate stipulated under the Contract from the date on which
the amount was overdue. For interest that the Borrower fails to pay on time (including penalty interest), compound interest shall be charged based on the overdue penalty interest rate. Penalty interest / compound interest shall be settled
according to the interest settlement rules stipulated under the Contract.
10.4 Should the Borrower
fail to use loans according to the usage stipulated under the Contract, the Lender is entitled to charge penalty interest for misuse of funds according to the penalty interest rate stipulated in the Contract from the date in which funds are
misused, and compound interest shall be charged according to the penalty interest rate for misuse of funds for interest (including penalty interest) not paid on time during the misuse of funds. Penalty interest / compound interest shall be
settled according to the interest settlement rules stipulated under the Contract. Penalty interest / compound interest shall be settled according to the interest settlement rules stipulated under the Contract.
10.5 Should the Borrower
simultaneously encounter the circumstances of Article 10.3 and Article 10.4, the greater penalty interest rate shall be charged and cannot be
combined.
10.6 Should the Borrower fail to repay loan principal, interest (including penalty interest and compound
interest), or other payables on time, the Lender is entitled to make an announcement through the media.
10.7 Should the Borrower’s
related parties’ controlling relationship with the Borrower change or should the Borrower’s related party encounter the circumstances in Article 10.1
above, other than items (1) or (2), such that it has affected or may affect the Borrower’s performance of its obligations under the Contract, the
Lender is entitled to take various measures as stipulated under the Contract.
Article 11 Auto-termination of Lender Commitment
11.1 Should the credit status of the Borrower worsen, the Lender may cancel all loan commitments not yet
withdrawn by the Borrower without prior notice.
11.2 In the event as described in 10.1 and 10.7, it constitutes the worsening of Borrower credit status.
Article 12 Withholding
12.1 Should the Borrower fail to repay debts due under the Contract as agreed (including debts announced as
due immediately), the Borrower agrees that the Lender may withhold corresponding amounts from all foreign exchange and RMB accounts that the Borrower has opened at ICBC to settle debts owed, until the Borrower’s debts under the Contract have been
settled in full.
12.2 Should the withheld amount be in a currency other than that of the Contract, the currency shall be
exchanged at the Lender’s applicable exchange rate on the withholding date. The Borrower shall bear interest and other expenses incurred from the withholding date to the settlement date (the date on which the Lender converts the withheld amount
into the currency of the Contract according to national foreign exchange management policies and actually pays of the debts under the Contract), as well as differences from exchange rate volatility during this period.
12.3 Should the amount withheld by the Lender be insufficient to settle all debts owed by the Borrower, the
Lender has the right to decide on the order of settlement.
Article 13 Transfer of Rights and Obligations
13.1 The Lender is
entitled to transfer its rights under the Contract, in part or in full, to a third party, and the Lender’s transfer thereof does not require the Borrower’s consent. Without the written consent of the Lender, the Borrower shall not transfer any of
its rights or obligations under the Contract.
13.2 The Lender or
Industrial and Commercial Bank of China Limited (“ICBC”) may, based on its business management needs, authorize or entrust other ICBC branch agencies to perform rights and obligations under the Contract, or place loan claims under the Contract
under the management of other ICBC branch agencies. The Borrower agrees that such actions shall no longer require the consent of the Borrower. Other ICBC branch agencies that undertake the rights and obligations of the Lender are entitled to
exercise all rights under the Contract and are entitled to file lawsuits, submit for arbitration, or apply for enforcement in the name of the given agency.
Article 14 Entry into Force, Changes, and Release of Contract
14.1 The Contract enters
into force on the signing date and shall be terminated on the date on which the Borrower fully performs all obligations under the Contract.
14.2 Any changes to the
Contract shall be agreed to the parties and made in writing. Changed clauses or agreements constitute a part of the Contract and shall have the same legal effect of the Contract. Apart from the changed sections, other parts of the Contract shall
remain in effect, and the original terms shall remain in effect until the change is effective.
14.3 Changes to and release
of the Contract shall not affect the rights of the contracting parties to claim damages. The release of the Contract does not affect the validity of the dispute resolution clause.
Article 15 Applicable Law and Dispute Resolution
The conclusion, validity, interpretation, performance of the Contract and settlement of disputes under the Contract shall be
governed by the laws of the People’s Republic of China. Any disputes or issues arising from or related to the Contract shall be settled through negotiations by the borrower and the lender; where negotiations fail, disputes shall be resolved
through methods as stipulated under the Contract.
Article 16 Address Confirmation for Serving Litigation/Arbitration Instruments
16.1 The Borrower
confirms that the address listed on the first page of the Contract is the address for serving litigation/arbitration instruments for disputes under the Contract. Litigation/arbitration instruments include but are not limited to subpoenas, notices
of hearings, judgments, rulings, mediations, and time-limit notices.
16.2 The Borrower agrees that arbitration institutions or the courts may use the
fax or email address listed on the first page of the Contract to serve arbitration/litigation instruments, except for judgments, rulings, and mediations.
16.3 The abovementioned
stipulations on service are applicable to first hearings, second hearings, retrials, and enforcement under arbitration and litigation proceedings. As for service to the above address, arbitration institutions or the courts may serve instruments
directly by mail.
16.4 The Borrower shall ensure the truthfulness and validity of the address, contact, fax, email address, and other information listed in the Contract, and if
related information changes, the Borrower shall promptly notify the Lender in writing; otherwise, service to the original mailing address shall still be valid, and the Borrower shall bear all resulting legal consequences.
Article 17 Complete Contract
Section 1: Basic Stipulations and Section 2: Specific Stipulations of the Contract together constitute a single complete
working capital loan contract, and the same terms in the two sections shall have the same meanings. The Borrower’s borrowing is subject to the above two sections.
Article 18 Notifications
18.1 All notices from
the parties to the Contract shall be sent in writing. Unless stipulated otherwise, the parties designate the domiciles listed in the Contract as their mailing address and contact address. Should either party’s mailing address or other contact
information change, the other party shall be promptly notified in writing.
18.2 Should either party
to the Contract refuse to accept mail or should otherwise be unable to served, the notifying party may serve mail by notarization or an announcement.
Article 19 Special Value-Added Tax Stipulations
19.1 Interest and expenses
under the Contract paid by the Borrower to the Lender shall all include taxes.
19.2 Should the Borrower
request that the Lender issue a value-added tax receipt, relevant information shall first be registered with the Lender. Information for registration includes the Borrower’s full name, the taxpayer’s identification number or social credit code,
address, telephone, bank of account, and account number. The Borrower shall ensure that relevant information provided to the Lender is true, accurate, and complete and shall provide relevant proof as required by the Lender; for specific
requirements, the Lender may send online notices or make online announcements.
19.3 Should the Borrower
collect its own value-added tax invoices, it shall provide the Lender with a stamped power of attorney, designating the collector and specifying such information as the collector’s identification number; thereafter, the collector shall present
the original of his or her identification card to collect value-added tax invoices. If the designated collector changes, the Borrower shall need to issue to the Lender a new stamped power of attorney. Should the Borrower choose to receive
value-added tax invoices by mail, the Borrower shall still provide accurate, error-free, and servable mailing information; if the mailing information changes, the Lender shall be promptly notified in writing.
19.4 Should the Lender be
unable to promptly issue value-added tax invoices due to natural disasters, government actions, social anomalies, and other circumstances of force majeure or because of tax authorities, the Lender is entitled to delay invoicing and shall not
assume any responsibility.
19.5 Should a value-added tax
invoice be lost, damaged, or overdue after it is collected by the Borrower or delivery by the Lender to a third party, or for other reasons unrelated to the Lender, such that the Borrower cannot receive the value-added tax invoice or cannot
deduct the tax on time, the Lender shall not be liable for compensating the Borrower for related economic losses.
19.6 Should the Borrower
need to have a special red-text value-added tax invoice issued because of sales returns, the suspension of taxable services, or invoicing errors, deductions, or the inability to certify invoices and the Borrower is required, under relevant laws,
regulations, and policy documents, to submit a Special Red-Text Value-Added Tax Invoice Issuance Information Form, the Borrower shall submit a Special Red-Text Value-Added Tax Invoice Issuance Information Form to tax authorities; once approved by
tax authorities and once notified, the Lender shall issue a special red-text value-added tax invoice.
19.7 During the performance
of the Contract, should national tax rates be adjusted, the Lender is entitled to adjust pricing under the Contract based on changes and adjustments to national tax rates.
Article 20 Miscellaneous
20.1 Lender’s failure to
exercise or partially exercise or delay the exercise of any right under the Contract does not constitute a waiver or change of that right or other rights, nor does it affect its further exercise of that right or other rights.
20.2 Should any term of
the Contract be invalid or unenforceable, it shall not affect the validity and enforceability of other terms and shall not affect the validity of the entire contract.
20.3 The Lender is
entitled to, pursuant to relevant legal and regulatory provisions and the requirements of financial regulators, to provide information related to the Contract or the Borrower’s other information to the People’s Bank of China Credit System and
other lawfully established credit information databases to be queried and used by qualified institutions or individuals. The Lender is also entitled, for the purposes of entering into and performing the Contract, to query the Borrower’s related
information on the People’s Bank of China Credit System and other lawfully established credit information databases.
20.4 The terms “related
party,” “related party relationships,” “related party transactions,” “main investors,” “key management personnel,” and other such terms shall have the same meanings as the same terms in the Accounting Standards for Business Enterprises No. 36 -
Related Party Disclosures (C.H. [2006] 3) issued by the Ministry of Finance, as well as subsequent amendments to the Standards.
20.5 The environmental and
social risks mentioned in the Contract refer to the environmental and social hazards and risks associated with the Borrower and its important related parties in construction, production, and operation activities, including environmental and
social issues related to energy consumption, pollution, land, health, safety, resettlement, ecological protection, and climate change.
20.6 The documents and vouchers for loans under the Contract prepared and retained by the Lender
according to its business rules constitute valid evidence for the credit relationship between the Borrower and the Lender and are binding on the Borrower.
20.7 In the Contract, (1)
all mention of the Contract shall include revisions to or supplementation of the Contract; (2) article titles are for reference only and do not constitute any interpretation of the Contract, nor do they impose any restrictions on the content of
the titles or their scope; and (3) should withdrawal dates or repayment dates fall on non-banking days, they shall be postponed to the next banking day.
The parties acknowledge that: both the Borrower and the Lender have fully negotiated on all of the terms
of the Contract. Xxxxxx has drawn the Borrower’s attention to all terms related to the parties’ rights and obligations, so that the Borrower full and accurately understands them, and at the request of the Borrower, the Lender has provided
explanations for relevant provisions. The Borrower has carefully read and fully understands all terms of the Contract (including Section 1: General Stipulations and Section 2: Specific Stipulations), and both the Borrower and the Lender have
reached full consensus on the understanding of the terms of the Contract with no objections to the contractual contents.
Borrower (Seal): Photronics DNP Mask Corporation Xiamen [seal]
Date:____________
As the legal representative/authorized
representative of the Borrower, I certify that the Borrower borrows from the Lender as per the contract terms, the fact that the seals used in this contract are authentic and valid, as well as that the Borrower has completed each required
procedure for the loan.
Borrower Legal Representative / Authorized Representative
(Signature):____[seal:] Xxxxx Xxxxx Xxxxxx_____________
This page is the Lender signature page of the Working Capital Loan Contract (Contract #: 0410000286-2018 (Xiang’an) No. 00287)
entered into by Photronics DNP Mask Corporation Xiamen and ICBC Xiang’an Branch.
We agree to proceed with the working capital loan with the business information below:
1. Borrower: Photronics DNP Mask Corporation Xiamen
2. Loans under the Contract shall be used for the following purpose; without the written consent of the Lender, the Borrower shall not misuse any
loans. The Lender is entitled to supervision of the use of funds. Purpose: VAT Payment
3. In accordance to Article 2.1 in the main body of this Contract, the currency of the loan in this Contract is RMB, and the amount is 1600000.00 (In WORDS: One million and six hundred thousand) yuan (In case of inconsistency amounts in numbers and words, the amount in words shall prevail)
4. In accordance to Article 2.2 in the main body of this Contract, the term of the loan in this contract is 36 months with the starting date from the date of withdrawal (for multiple withdrawals, starting date is the day of the first withdrawal), and the loan document determines the actual
withdrawal date.
5. The interest rate of RMB loan is determined by the method (3)
of Article 3.1 in the main body of this Contract.
6. The interest rate of foreign currency loan is determined by the method / of Article 3.2 in the main body of this Contract.
7. Interest shall be calculated on lending under the Contract on a daily basis from the withdrawal date and settled every month (month/quarter/six months). Interest shall be settled with principal when loans are due, and the daily interest rate = annual interest rate/360.
8. The penalty interest rate for overdue payments under the Contract shall be determined at 30 % of the original lending rate, and the penalty interest rate for misuse of loans shall be determined at 50 %
of the original lending rate.
9. In accordance to Article 5.1 of the main body of this Contract, the Borrower shall repay the loan under this Contract according to method (2) (1/2).
(1) One-time loan repayment upon expiration.
(2) According to the following repayment plan:
Lender: ICBC Xiang’an Branch [seal]
(seal)
Date: November 22, 2018
|
Signature Page
|
||
|
Contract Serial #201811220410001245216760
Document 1 of 2
|
ICBC Mobile Bank “Scan It” to verify
contract contents [QR Code]
|
|
No.:0410000286-2018 (Xiang'an) No. 00275_________________
(2016 Edition)
Special Note: The Contract is negotiated by the lender and the borrower on an equal and voluntary basis.
All contract terms are true representations of the parties’ intentions. To protect the legitimate rights and interests of the Borrower, the Lender specifically invites the Borrower to take full notice of the full terms and conditions of the
parties, in particular, the contents in bold.
Lender: Industrial and Commercial Bank of China Limited Xiamen
Xiang'an Branch
Principal:
Domicile (Address):
Postal Code:
Borrower:
Legal Representative: Contact: Mobile No.: 00000000000
Domicile (Address):
Postal Code:
Telephone: Fax:
Email:
[Please ensure that the Borrower fills in the above information
accurately and completely to ensure the timely delivery of relevant notices and legal documents.]
Through equal negotiations, a consensus has been reached and the Contract has been entered into on the matters of the Lender’s
issuance of lending to the Borrower.
Section 1 General Stipulations
Article 1 Loan Purpose
Loans under the Contract shall be used for the following purpose; without the written consent of the Lender, the Borrower
shall not misuse any loans. The Lender is entitled to supervision of the use of funds.
Loan Purpose: VAT Payment
Article 2 Lending Amount and Term
2.1 The currency of the
contract is the RMB , and the amount is 13,500,000.00 (in words: Thirteen million and five hundred thousand yuan) (where the figure and the amount in words is not the same, the amount in words shall prevail).
2.2 The lending term under the
Contract is 36 months , from the actual withdrawal date (for multiple withdrawals, from the first withdrawal date); the actual withdrawal date shall be based
on the loan receipt.
Article 3 Interest Rates, Interest, and Fees
3.1 [Method for determining the RMB lending rate]
The RMB lending rate is determined according to the following method (3) below:
(1) Fixed interest rate, at an
annual interest rate of / %, with the interest rate remaining unchanged for the duration of the Contract.
(2) The lending rate is
determined by the benchmark interest rate plus a floating range, wherein the benchmark interest rate is the benchmark lending rate of the People’s Bank of China on / (withdrawal
date/ effective date of the Contract) that corresponds to the lending term stipulated in Article 2.2, and the floating range is /(upward/downward/zero) / %. After the Borrower makes a withdrawal, the lending rate will remain the same for a period of / (1/3/6/12) month(s), to be adjusted once a period, with interest accounted for in segments. The date for determining the interest rate for the second
period shall be the date that corresponds to the withdrawal date at the end of the first period; should the given month not have the given date that corresponds to the withdrawal date, the corresponding date shall be the last day of the given
month, and the same shall hold true for other periods. Should the Borrower make withdrawals in installments, the lending rate shall be adjusted according to method /
(A/B) listed below:
A. Regardless of the number of
withdrawals during a single period, the current lending rate determined on the date on which the interest rate for the current period shall be used, to be adjusted at the next period.
B. The lending rate shall be
determined and adjusted for each withdrawal.
(3) The lending rate for each
withdrawal shall be determined based on the benchmark interest rate plus the floating range, wherein the benchmark interest rate shall be the annual
(annual/monthly) loan promotion rate (LPR) by the National Interbank Funding Center published on the business day prior to the withdrawal date (withdrawal
date/effective date of the contract) for the current withdrawal, and the floating range shall be / (upward/downward/zero) / % or plus (plus/less/zero) 67.75 base points (with one base point being 0.01%). The lending rate after each withdrawal shall be adjusted according to method __(A/B)
listed below:
A. For a period of 1 (1/3/6/12) month(s), to be adjusted once a period, with interest accounted for in segments. The benchmark interest rate adjustment date for the second period
shall be the date that corresponds to the withdrawal date at the end of the first period; should the given month not have the given date that corresponds to the withdrawal date, the corresponding date shall be the last day of the given month.
Should the National Interbank Funding Center not have published a loan benchmark interest rate for the corresponding term on the previous business day, the loan benchmark interest for the corresponding term published on the last business day shall
prevail, and so on and so forth.
B. The lending rate shall not
be adjusted for the entire lending term.
(4) Other: /
3.2 [Method for determining the foreign exchange lending rate]
The foreign exchange lending rate shall be determined according to method / listed below:
(1) Fixed interest rate, at
an annual interest rate of / %, with the interest rate remaining unchanged for the duration of the Contract.
(2) Floating interest rate,
with the lending rate a floating interest rate composted of the spread of the / -month / (LIBOR/HIBOR) as the benchmark interest rate plus / base points (one base point is 0.01%). The spread will remain
unchanged during the Contract term. Should withdrawals be made in installments, the interest rate shall be calculated for each withdrawal. After the Borrower makes a withdrawal, the benchmark interest rate shall be adjusted according to method / listed below, with interest accounted for in segments:
A. For a period of / (1/3/6/12) month(s), to be adjusted once a period. The benchmark interest rate adjustment date for the second period shall be the date that corresponds to the
withdrawal date at the end of the first period; should the given month not have the given date that corresponds to the withdrawal date, the corresponding date shall be the last day of the given month, and the same shall hold true for other periods.
B. The benchmark interest
rate shall be adjusted on the first day of each interest-bearing period.
(3) Other:_________________________/______________________________
3.3 Interest shall be
calculated on lending under the Contract on a daily basis from the withdrawal date and settled every month (month/quarter/six months). Interest shall be
settled with principal when loans are due, and the daily interest rate = annual interest rate/360.
3.4 The penalty interest rate
for overdue payments under the Contract shall be determined at 30 % of the original lending rate, and the penalty interest rate for misuse of loans shall be
determined at 50 % of the original lending rate.
3.5 In addition to
interest, the Borrower shall also pay a commitment fee to the Lender. The commitment fee shall be the difference between the amount of lending stipulated in Article 2 and the Borrower’s withdrawals (the daily average balance during the billing
period) and an annual rate of / %, to be paid according to
method / below:
(1) A single payment shall be made to the Lender on the last day of the billing period.
(2) After the Contract enters into force, payments shall be made in installments to the Lender on the 20th day of every / (month/quarter/six months) up until the last day of the billing period.
Should loans under the Contract be on a revolving basis, the billing period refers to the time limit on the use of credit for
revolving loans; should loans under the Contract not be on a revolving basis, the billing period refers to the period between the signing date of the Contract and the withdrawal date of the last loan as stipulated in Article 4.
The commitment fee is paid in installments; should the Borrower fail to pay the commitment fee on time, the
Lender is entitled to the suspension of the issuance of loans or to cancel all amounts that the Borrower has not withdrawn.
Article 4 Withdrawals(Revolving Loans are Not Applicable)
4.1 The Borrower shall make withdrawals according to method (1) (1/2/3)listed below according to actual funding needs:
(1) One-time loan request prior to 11/30/2018/;
(2) One or more loan requests after
the Contract’s effective date and before / //;
(3) Withdrawals in installments on
the dates below; the Borrower may, with the Lender’s consent, make changes to withdrawal dates or amounts based on funding needs, though the Borrower must make loan requests no later than ///.
|
Withdrawal Date
|
Withdrawal Amount
|
4.2 Should the Borrower fail to make withdrawals as agreed, the Lender is entitled to cancel, in part or in
full, lending that the Borrower has not yet withdrawn.
Article 5 Repayments
5.15.1 The Borrower shall
repay loans under the Contract according to method (2) (1/2) listed below:
(1) One-time loan repayment
upon expiration.
(2) According to the
following repayment plan (when there is additional content, additional pages can be attached):
|
Planned Repayment Date
|
Planned Repayment Amount
|
||
|
05-20-2019
|
135000.00 yuan
|
||
|
11-20-2019
|
540000.00 yuan
|
||
|
05-20-2020
|
675000.00 yuan
|
||
|
11-20-2020
|
1350000.00 yuan
|
||
|
05-20-2021
|
1350000.00 yuan
|
||
|
11-05-2021
|
9450000.00 yuan
|
5.2 For lending under the Contract under the following circumstances, the Borrower shall not be required to pay
the early repayment penalty in case the loan is returned immediately after the corresponding funds are in place, thus resulting in early repayment:
_________________________/______________________________
17
