THE CONTRACT FOR THE JOINT VENTURE
OF IMP AND MINGHUA MICROELECTRONIC INVESTMENT CO. LTD
Chapter 1 General Provisions
In accordance with the Law of the People's Republic of China on Joint ventures
Using Chinese and Foreign Investment ("the Joint Venture Law") and other
relevant Chinese laws and regulations, Minghua Microelectronic Investment
Company and IMP Company, in accordance with the principle of equality and mutual
benefit and through friendly consultations, agree to set up a joint venture
enterprise by the investment of IMP Company and Minghua Company in Ningbo of the
People's Republic of China.
Chapter 2 Parties of the Joint venture
Article 1
Parties to this contract are as follows:
1.1 Minghua Microelectronic Investment Company (the original Minghua
Microelectronic Company hereinafter referred to as Party A), is a legal
enterprise in accordance with the law of the People's Republic of China
(hereinafter referred to as China) in China, registered with the license number
of 3302001004703, and its legal address is at:
[Chinese translation not provided] 578 [Chinese translation not provided] 7
[Chinese translation not provided].
Legal representative: Name: [Chinese characters] (Xxxxx Xx-xxx)
Position: Chairman of the Board
Nationality: Chinese
1.2 IMP Company (hereinafter referred to as Party B), is a legal enterprise in
accordance with the American law, registered in the U.S., with license number
IMPXC. Its legal address is at:
0000 Xxxxx Xxxxx Xx., Xxx Xxxx, XX 00000
Legal representative: Name: Xxxxxxxx Xxxxxxxxxx
Position: Chairman of the board
Nationality: American
1.3 Both parties are legal person in accordance with respective law, with the
right to conclude and perform the contract.
Chapter 3 Establishment of the joint venture company
Article 2
In accordance with the Joint Venture Law and other relevant Chinese laws and
regulations, both parties of the joint venture agree to set up a joint venture
limited liability company (hereinafter referred to as the joint venture company)
in Ningbo, China.
Article 3
The name of the joint venture is [Chinese translation not unavailable].
The name in foreign language is IMP&MH Microelectronic Co. Ltd.
The legal address of the joint venture company is at: [Chinese translation not
provided] 578 [Chinese translation not provided] 7 [Chinese translation not
provided]
Article 4
All activities of the joint venture company shall be governed by the laws,
decrees and pertinent rules and regulations of the People's Republic of China.
Article 5
The Organization form of the joint venture company is a limited liability
company. Each party to
the joint venture company is liable to the joint venture company within the
limit of the capital subscribed by it. The profits, risks and losses of the
joint venture company shall be shared by the parties in proportion to their
contributions to the registered capital.
Chapter 4 The Purpose, Scope and Scale of Production and Business
Article 6
The goals of the parties to the joint venture in the business specified at
Article 7 are to enhance economic co-operation and technical exchanges, to
improve the product quality, develop new products, and gain a competitive
position in the world market in quality and price by adopting advanced and
appropriate technology and scientific management methods, so as to raise
economic results and ensure satisfactory economic benefits for each investor.
Article 7
The productive and business scope of the joint venture company is to design,
develop, produce and sell Integrated Circuits, and products of electronic
modules and software as well.
Article 8
The production scale of the joint venture company is as follows:
The production capacity of semiconductor electric power devices and others,
after the joint venture is put into operation, is 12,000 wafers per month (5
inch wafer, 12 masks process, processing level 0.65 u m.). The production scale
may be increased up to 40,000 with the development of the production and
operation. The wafer varieties may be developed into 6~8 inch (processing level
0.5 u m.).
Chapter 5 Total Amount of Investment and the Registered Capital
Article 9
The total amount of investment of the joint venture company is RMB 248.24
million Yuan (including US dollar 4.0 million).
Article 10
Investment contributed by the parties is RMB 152.0 million Yuan, which will be
the registered capital of the joint venture company. Of which:
Party A shall pay RMB 76.0 million Yuan, accounting for 50%;
Party B shall pay RMB 76.0 million Yuan, accounting for 50%.
Article 11
Both Party A and Party B will contribute the following as their investment:
11.1 Party A:
machines and equipment RMB 32.0 million Yuan premises RMB 40.20 million Yuan the
right to the use of the site RMB 3.8 million Yuan RMB 76.0 million Yuan in all.
11.2 Party B:
machines and equipment RMB 39.92 million Yuan industrial property RMB 36.08
million Yuan, RMB 76.0 million Yuan in all.
When contributing capital goods (Attachment 3) or industrial property
(Attachment 2, 4, 6, 7) as investment, Party A and Party B shall conclude a
separate agreement to be a part of this main contract.
Article 12
The registered capital of the joint venture company shall be paid by Party A and
Party B respectively, according to their respective proportion of their
investment. The machines and equipment capital of party B can be to Ningbo,
China, in three installments. The payment arrangement proposal is in Attachment
1.
Article 13
The shortage between the total investment and registered capital of the joint
venture shall be lent from bank, especially from the bank in China or other
resources. The joint venture company shall handle the matter of the required
bank guarantees for the loan.
Except for the about loan, judged by the board of directors of the joint
venture, the working capital dollar or other capital dollar required by the
joint venture, shall be lent and the joint venture shall handle the bank
guarantee.
If the joint venture fails to get the loan, the board shall raise the required
money from both parties according to the above proportion. Unless agreed by both
parties, any party has no obligation to increase the registered capital for
providing with bank guarantees for the loan from the third party.
Article 14
Any party of the contract shall not assign all or part of his investment
subscribed to a third party without the agreement of the other party and the
approval from the examination and approval authority.
In case any party to the joint venture intends to assign all or part of his
investment subscribed to a third party, the other party has preemptive right.
Article 15
Without the unanimous approval of the board, any parties shall not raise a
mortgage on all or part of his investment or take all or part of his investment
as guarantor.
Chapter 6 Responsibilities of Each Party to the Joint venture
Article 16
Party A and Party B shall be respectively responsible for the following matters:
16.1 Responsibilities of Party A:
Providing cash, machinery and equipment and premises in accordance with the
provisions of Chapter 5;
Handling of applications for approval, registration, business license and other
matters concerning the establishment of the joint venture company from relevant
departments in charge of China;
Processing the application for the right to the use of a site to the authority
in charge of the land;
Organizing the design and construction of the premises and other engineering
facilities of the joint venture company and in conultation with Party B;
Process import customs declaration for the machinery and equipment contributed
by Party B as investment and arranging the transportation within the Chinese
territory;
Contacting and settling the fundamental facilities such as water, electricity,
transportation etc.;
Xxxxxxx for the possible tax benefit and reduction and other benefit;
Recruiting Chinese management personnel, technical personnel, workers and other
personnel needed, and in conultation with Party B;
Assisting foreign workers and staff in applying for entry visas, work licenses
and handling their travel procedures;
Responsible for handling other matters entrusted by the joint venture company.
16.2 Responsibilities of Party B:
Providing, machinery and equipment, industrial property ... in accordance with
the provisions of Chapter 5, and assisting to raise the capital for the joint
venture;
Handling the matters entrusted by the joint venture company, such as selecting
and purchasing machinery and materials outside China, etc.;
Providing necessary technical personnel for installing, testing and trial
production of the equipment as well as the technical personnel for production
and inspecting;
Training the technical personnel and workers of the joint venture company;
Providing the technology, product to be manufactured and the market to the joint
venture in accordance with the contract and responsible for the stable
production of qualified products of the joint venture company in the light of
design capacity within the specified period;
Responsible for the sale of the joint venture's products for the first three
years;
Responsible for other matters entrusted by the joint venture company.
Chapter 7 Transfer of Technology
Article 17
Party B shall transfer all the existing foundry processing technology, the IMP's
standard products processing technology to the joint venture company. The major
contents of the transfer is in Attachment 2, which shall be signed the same time
with this contract.
Both sides agree that the transfered technology of products and processing shall
not be transferred to the third party in China without the agreement by both
sides.
Article 18
In case Party B fails to provide equipment and technology in accordance with the
provisions of this contract and the technology transfer agreement or in case any
deceiving or concealing actions are found, Party B shall be responsible for
compensating the direct losses to Party A. Also if Party A fails to keep its
commitments as specified with respect to factory, cash and other items as
specified, the losses suffered by the Party B will be paid by Party A.
Chapter 8 Trade Mark and Selling of Products
Article 19
"Trade mark License agreement" (Attachment 6) shall be conclude between the
joint venture and Party B, all relevant activities concerning the use of IMP
trade mark shall be in accordance with its provision. The 4.0 million US dollar
payment to party B includes the fee of using the IMP trade mark, the products
produced by the joint venture company can use the IMP trade mark.
Article 20
The products of the joint venture company will be sold both on the Chinese and
the overseas market, the export portion accounts for 90% and 10% for the
domestic market, for the first three years. The products sold are those business
including the wafers made for IMP's products by the Joint venture and the new
business brought in by the Joint venture Company.
Article 21
The joint venture's products to be sold in China may be handled by the joint
venture company directly. This includes IMP standard products. In order to sell
IMP's standard products in an unified price, the Joint venture Company will sign
a separate sale agreement with IMP.
Article 22
Products of the joint venture may be sold on overseas markets through the
following channels:
The joint venture company may directly sell its products on the international
market, or the joint venture company may entrust Party B to sell its products.
Chapter 9 The Board of Directors
Article 23
The date of registration of the joint venture company shall be the date of the
establishment of the board of directors of the joint venture company.
Article 24
The board of directors is composed of 9 directors, of which 5 shall be appointed
by Party A, 4 by Party B. The chairman, vice chairman of the board shall be
appointed respectively by one Party and the other Party. The term of office for
the directors, chairman and vice-chairman is three years, their term of office
may be renewed if continuously appointed by the relevant party.
The chairman shall be appointed by Xxxxxxx, the vice chairman by IMP;
The general manager/board member shall appointed by IMP, and four deputy general
managers shall be recommended by Xxxxxxx and approved by the board of directors.
However it is understood that the goal of the Joint venture is making profit.
All the appointments will be made based on the goal.
Article 25
The highest authority of the joint venture company shall be its board of
directors. It shall decide all major issues concerning the joint venture
company:
1. Amendment of the regulation of the joint venture;
2. Termination of the joint venture;
3. Mergence with the other economic units;
4. Increase of the registered capital of the Joint venture;
5. Acceptance, alteration or termination of the labor contract, wages,
welfare for the staff, etc.;
6. Bonus share.
7. Approval of annual financial report of the joint venture.
Article 26
Unanimous approval shall be required for Article 25 term 1.2.3. As for other
matters, approval by majority or a simple majority shall be required.
Article 27
The chairman of the board is the legal representative of the joint venture
company. Should the chairman be unable to exercise his responsibilities for any
reason, he shall authorize the vice-chairman or any other directors to represent
the joint venture company temporarily.
Article 28
The board of directors shall convene at least one meeting every year. The
meeting shall be called and presided over by the chairman of the board. The
chairman may convene an interim meeting based on a proposal made by more than
one third of the total number of directors. Minutes of the meetings shall be
placed on file.
Chapter 10 Business Management Office
Article 29
The joint venture company shall establish a management office which shall be
responsible for its daily management. The management office shall have a general
manager, 4 deputy general managers, by Party A and by Party B respectively. The
general manager and deputy general managers whose terms of office is 3 years
shall be appointed by the board of directors. The general manager shall be
appointed from the non-chairman Party.
Article 30
The responsibility of the general manager is to carry out the decisions of the
board and organize and conduct the daily management of the joint venture
company. The deputy general managers shall assist the general manager in his
work.
Article 31
In case of graft or serious dereliction of duty on the part of the general
manager and deputy general managers, the board of directors shall have the power
to dismiss them at any time.
Chapter 11 Purchase of Equipment
Article 32
The joint venture is responsible for the purchase of required equipment and
apparatus, etc.
Article 33
In its purchase of required raw materials, fuel, parts, means of transportation
and articles for office use, etc., the joint venture company shall give first
priority to purchase in China where conditions are the same.
Chapter 12 Labor Management
Article 34
Labor contract covering the recruitment, employment, dismissal and resignation,
wages, labor insurance, welfare, rewards, penalties and other matters concerning
the staff and workers of the joint venture company shall be drawn up between the
joint venture company and the labor union of the joint venture company as a
whole, or the individual employees in the joint venture company in accordance
with the Regulations of the People's Republic of China on Labor Management in
Joint Ventures Using Chinese and Foreign Investment and its Implementing Rules.
The labor contracts shall, after being signed, be filed with the local labor
management department.
Article 35
The matters concerning the employment of foreign staff shall be governed by the
relative regulations of China.
Chapter 13 Labor Union
Article 36
The task of the labor union is:
Protecting the rights and benefit of the staff in accordance with the law;
Assisting the joint venture to arrange welfare funds reasonably;
Taking part in the settlement of the dispute between staff and the joint
venture.
Article 37
Labor union representative has the right to deal with the management office of
the joint venture for the problems of the staff, such as rewards, penalties,
wages labor insurance, etc.
Article 38
The joint venture shall transfer 2% of the total wages of the staff as the funds
of labor union, in accordance with Chinese law and provisions.
Chapter 14 Taxes, Finance and Audit
Article 39
The joint venture company shall pay taxes in accordance with the provisions of
Chinese laws and other relative regulations.
Article 40
Staff members and workers of the joint venture company shall pay individual
income tax according to the Individual Income Tax Law of the People's Republic
of China.
Article 41
Allocations for reserve funds, expansion funds of the joint venture company and
welfare funds and bonuses for staff and workers shall be set aside in accordance
with the provisions of the Joint Venture Law. The annual proportion of
allocations shall be decided by the board of directors according to the business
situation of the joint venture company.
Article 42
The fiscal year of the joint venture company shall be from January 1 to December
31 (IMP will prefer the fiscal year to match with IMP fiscal year which is April
1st to March 31st). All vouchers, receipts, statistic statements and reports
shall be written in Chinese and English. The accounting procedure is in
Attachment 5.
Article 43
Financial checking and examination of the joint venture company shall be
conducted by an auditor registered in China and the results shall be submitted
to the board of directors and the general manager.
The joint venture shall prepare the financial statement every quarter and the
year end result Which will also audited by IMP auditor.
Article 44
In the first three months of each fiscal year, the manager shall prepare the
previous year's balance sheet, profit and loss statement and proposal regarding
the disposal of profits, and submit them to the board of directors for
examination.
Chapter 15 Insurance
Article 45
Insurance policies of the joint venture company on various kinds of risks shall
be underwritten with the People's Republic of China. Types, value and duration
of insurance shall be decided by the board of directors in accordance with the
provisions of the People's Insurance Company of China.
Chapter 16 Duration of the Joint venture
Article 46
The duration of the joint venture company is 10 years. The establishment date of
the joint venture company shall be the date on which the business license of the
joint venture company is issued.
An application for the extension of the duration, proposed by one party and
unanimously approved by the board of directors, shall be submitted to the
Ministry of Foreign Trade and Economic Cooperation (or the examination and
approval authority entrusted by it) six months prior to the expiry date of the
joint venture.
Article 47
Upon the expiration of the duration, or termination before the date of
expiration of the joint venture, liquidation shall be carried out according to
the relevant laws. The liquidation shall be made in accordance with the
proportion of investment contributed by Party A and Party B.
Chapter 17 The Amendment, Alteration and Termination of the Contract
Article 48
The amendment of the contract or other appendices shall come into force only
after a written agreement has been signed by Party A and Party B and approved by
the original examination and approval authority.
Article 49
In case of inability to fulfil the contract or to continue operation due to
heavy losses in successive years as a result of force majeure, the duration of
the joint venture and the contract shall be terminated before the time of
expiration after being unanimously agreed upon by the board of directors and
approved by the original examination and approval authority.
Article 50
Should the joint venture company be unable to continue its operation or achieve
its business purpose due to the fact that one of the contracting parties fails
to fulfil the obligations prescribed by the contract and articles of
association, or seriously violates the provisions of the contract and articles
of association, that party shall be deemed to have unilaterally terminated the
contract. The other party shall have the right to terminate the contract in
accordance with the provisions of the contract after approval by the original
examination and approval authority, and to claim damages. In case both Parties
of the joint venture company agree not to terminated the contract, the party who
fails to fulfil its obligations shall be liable for the losses caused thereby to
the joint venture company.
Chapter 18 Liability for Breach of Contract
Article 51
Should either Party A or Party B fail to pay on schedule the contributions in
accordance with the provisions defined in Article 12 of this contract, the party
in breach shall pay to the other party 0.5% of the contribution starting from
the first month after exceeding the time limit. Should the party in breach fail
to pay after 3 months, 1.5% of the contribution shall be paid to the other
party, who shall have the right to terminate the contract and to claim damages
from the party in breach in accordance with the provisions of Article 49 of the
contract.
Article 52
Should all or part of the contract and its appendices be unable to be fulfilled
owing to the fault of one party, the party in breach shall bear the liability
therefore. Should it be the fault of both parties, they shall bear their
respective liabilities according to the actual situation.
Chapter 19 Force Majeure
Article 53
Should either of the parties to the contract be prevented from executing the
contract by force majeure, such as earthquake, typhoon, flood, fire, war or
other unforeseen events, and their occurrence and consequences are unpreventable
and unavoidable, the prevented party shall notify the other party by telegram
without any delay, and within 15 days thereafter provide detailed information of
the events and a valid document for evidence issued by the relevant public
notary organization explaining the reason of its inability to execute or delay
the execution of all or part of the contract. Both parties shall, through
consultations, decide whether to terminate the contract or to exempt part of the
obligations for implementation of the contract or whether to delay the execution
of the contract according to the effects of the events on the performance of the
contract.
Chapter 20 Applicable Law
Article 54
The formation, validity, interpretation, execution and settlement of disputes in
respect of this contract shall be governed by the relevant laws of the People's
Republic of China.
Chapter 21 Settlement of Disputes
Article 55
Any disputes arising from the execution of, or in connection with, the contract
shall be settled through friendly consultations between both parties. In case no
settlement can be reached through consultations, the disputes shall be submitted
to the Foreign Economic and Trade Arbitration Commission of the China Council
for the Promotion of International Trade for arbitration in accordance with its
rules of procedure. The arbitral award is final and binding upon both parties.
Article 56
During the arbitration, the contract shall be observed and enforced by both
parties except for the matters in dispute.
Chapter 22 Language
Article 57
The contract shall be written in Chinese and in English. Both language versions
are equally authentic. In the event of any discrepancy between the two
aforementioned versions, the Chinese version shall prevail.
Chapter 23 Effectiveness of the Contract and Miscellaneous
Article 58
The appendices drawn up in accordance with the principles of this contract, are
integral parts of this contract, including the project agreement, the technology
transfer agreement, the sales agreement etc.
Article 59
The contract and its attachments shall come into force until approved by the
relevent top management administration (before that, this contract is not
legally effective).
Article 60
Should notices in connection with any party's rights and obligations be sent by
either Party A or Party B by telegram or telex, etc., the written letter notices
shall be also required afterwards. The legal addresses of Party A and Party B
listed in this contract shall be the posting addresses.
Article 61
The contract is signed in Ningbo, China, by the authorized representatives of
both parties on ____________, ____________.
Note: Attachment 1, 2, 3, 4, 5 and 6 have the same legal validity to the
contract.
For Party A For Party B
Ningbo Minghua Microelectronic
Investment Co. IMP Inc
/s/ (sd ---) /s/ (sd ---)
(Signature) (Signature)
Attachment 1 Payment Arrangement of Compensation by Xxxxxxx to IMP
1. U.S.$ 2.0M L/C for IMP on the signing and coming into force of the contract
within 15~30days.
________ release U.S.$ 0.75M on the receiving of IMP's project plan and complete
processing documents the receiving of the shipping documents (the first lot) of
part of the first 50% of equipment, and within one week after the technical
training starting;
_________ release U.S.$ 0.75M on the shipping documents (the second lot) of the
first 50% of equipment;
_________ release the last U.S.$ 0.5M on the arrival and verification of the
first 50% of equipment.
2. U.S.$ 1.0M L/C for IMP after 6 moths of commercial production and achieving
U.S.$6M sales revenue. After IMP receives the L/C, shipping of the second 50% of
equipment shall start.
_________ release U.S.$ 0.5M on the shipping documents (the third lot) of the
second 50% equipment;
_________ release the other U.S.$ 0.5M on the arrival and verification of the
second 50% of equipment.
3. The remainder U.S.$ 1.0M shall be paid to IMP from the first U.S.$ 1.0M
profit created by the joint venture.
Note: IMP shall provide with detailed descriptions for the contents of the
compensation made by Xxxxxxx to IMP as appendix.
For Party A (Minghua) For Party B (IMP)
/s/ (sd ---) /s/ (sd ---)
(Signature) (Signature)
Attachment 2 Transfer of Technology, Proceess
According to "Memorandum of Understanding Relating to Joint Venture
between IMP Inc. and NingBo MingHua Micro--Electronic Co. Ltd of China",
"1. IMP will contribute to the joint venture with the following items: .........
b) Process technology. IMP will license to the joint venture its mixed
signal processes ranging from 2.5 to 700 volts. These process technologies are
specially developed for analog and mixed signal designs and ideal for low power
and high efficient power management ICs.
c) Set up process for manufacturing, IMP engineers and technicians will
bring up processes in the joint venture Fab facility for wafer manufacturing."
IMP shall provide with:
1. Process technology
1.1 process integration
IMP transfer its more than 35 process integration modules to the joint
venture, ranging from 2.5 to 700volts. Each process module including: process
type, application rang, design rule for layout, device model specification,
standard cell data base, PCM structure, integration process flow and
manufacturing requirement.
1.2 Chip manufacturing technology including:
Photolithographic, oxidation and diffusion, planarization, deposit, etching and
implantation, etc. Technological flow, procedure, process specification,
operation specification, inspection specification.
2. PCM (Process Control Monitor) test technology, including:
PCM test operation system software, application software for PCM testing, layout
design for test devices, testing methods and operation, device specification
analyzing technique.
3. IMP shall continuatively provide with new process technology developed.
According to the following of the memorandum:
"e) Business, IMP will bring business volume to the joint venture wafer
foundry business from its wafer foundry business and from its standard product
business. IMP can bring to the joint venture the following business revenue:
year 1----------U.S.$ 12M
year 2----------U.S.$ 18M
year 3----------U.S.$ 24M
f) Standard products. The joint venture can expand its scope to cover
development of new standard ICs for China market."
IMP shall provide with detailed list of product transferred, including:
Product type, package form, process type, manufacturing level, product's
performance and application, technical specification, similar type by other
company.
1. IMP shall provide with integrated technical data for the design and
manufacture of the products, including:
Schematic and logic diagram
Layout of the circuit
Working masks
Testing methods for the products
Package type and manufacturing
2. IMP shall provide with yield historical records, including:
Wafer probing yield
Yield of packaging and bonding
Composite yield of product
According to
"7. Management and control of the operation. IMP currently has several
large wafer fabrication foundry customers such as Microsemi, International
rectifier, National semiconductr, Dialog and Tektronix, In order to maintain
continuity relative to those businesses, it is necessary that IMP will need to
manage the joint venture and has the control of the operation for the first
three years of operations. After the first three years, XxxxXxx will assume the
lead role of management and control of the operation." (Memorandum)
IMP shall provide with
1. IS09000 quality system management file, including:
Procedure file, Quality system guarantee file
2. In-line processing management software
3. Data about quality control and reliability control such as statistic data,
failure analyzing data.
4. The type, specification, vendor of the raw materials, gases, chemical etc,
for the processing line.
For Party A (Minghua) For Party B (IMP)
/s/ (sd ---) /s/ (sd ---)
(Signature) (Signature)
Attachment 3 Assets and Equipment
According to "Memorandum of Understanding Relating to Joint Venture
between IMP Inc. and NingBo MingHua Micro-Electronic Co. Ltd of China", and to
the intention concerning the transferred assets and equipment through
consultation by both parties, IMP shall provide with:
A. Fabrication equipment: IMP will transfer its present production and test
equipment of the line to the joint venture, IMP shall provide with whatever is
available:
1. Complete Fab equipment and instruments, and a list of them, including:
Wafer processing equipment,
In-line test / inspection equipment and instruments,
PCM test system,
Computer aided production management Hardware and Software,
Raw material test / inspection equipment;
indicating the manufacturer model#, date, and status of above items.
2. Complete documentation,
including
Instruction Manual
Maintenance Manual
System Structure Drawing
Electrical Drawings
Technical Specification and Acceptance Specification
Installation Manual and Environment Requirements
Maintenance Records (If only available)
3. IMP will provide with complete spare parts, and a list of them, indicating
in the list:
Item description
Quantity
Description of using (If only available)
B. Supporting facilities with listing:
Including:
IMP's existing air compressor
IMP's existing DI water system
IMP's existing processing gas supply system
Others
Instruction Manuals of the above
This can be done only if the Fab in San Xxxx is shut down.
C. According to the agreement by both parties, IMP shall provide the joint
venture with all the assets, equipment and assets in the San Xxxx facility.
Minghua will send their representatives to register these items with IMP
personnel. The Joint Venture shall decide if these items should be transferred
to China.
D. IMP shall provide with the documentation of installation and environment
requirements as soon as possible to meet with the need of constructions and the
equipment installation.
E. IMP shall transfer all hardware of the Fab equipment and instruments in 2
shipments to Ningbo. The equipment list is the list 3. The items of the two
shipments are listed in list 3.1, 3.2.
For Party A (Minghua) For Party B (IMP)
/s/ (sd ---) /s/ (sd ---)
(Signature) (Signature)
IMP [Chinese translation not available]
The List of IMP Equipment Transfered
------------------------------------------------------------------------------------------------------------------------------------
AREA TYPE MANUFACTURE XXXXX.XX COMMENTS MODEL # SERIAL #
------------------------------------------------------------------------------------------------------------------------------------
Ellipsometer Rudolp Auto EI 70387
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU AB-1 BPSG BD4/7351A DIMM-1
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU AB-2 Poly BDF4/7351A DIMM-1
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU AB-3 Nitride BDF4/7351A DIMM-1
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU AB-4 Nitride BDF4/7351A DIMM-1
------------------------------------------------------------------------------------------------------------------------------------
Rinser/Dryer Verteq RD-4A FOR WS-4 1600-3 5060
------------------------------------------------------------------------------------------------------------------------------------
Rinser/Dryer Verteq RD-4B FOR WS-4 1600-3 5061
------------------------------------------------------------------------------------------------------------------------------------
Xxx Xxxx Xxxx WS-4 100:1 HF,H2S04,H2S04 8
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU BB-1 Initial OX,Isolation,Field BDF4/7351A DIMM-2
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU BB-2 Initial OX,Isolation,Field BDF4/7351A DIMM-2
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU BB-3 Initial Pregate,base,field BDF4/7351A DIMM-2
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU BB-4 Initial Pregate,base,field BDF4/7351A DIMM-2
------------------------------------------------------------------------------------------------------------------------------------
Rinser/Dryer Verteq RD-5A FOR WS-5 1600-3 5076
------------------------------------------------------------------------------------------------------------------------------------
Rinser/Dryer Verteq RD-5B FOR WS-5 1600-3 5075
------------------------------------------------------------------------------------------------------------------------------------
Wafer Transfer Fortrend FWT-6 Wafer Transfe F-5000
------------------------------------------------------------------------------------------------------------------------------------
Wafer Transfer Fortrend FWT 3 Wafer Transfe F-5000 1092382
------------------------------------------------------------------------------------------------------------------------------------
Wet Sink Noah WS-5 RCA-SC2,RCA-SC1,20 8
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU CB-1 Initial OX,Isolation,Field BDF4/7351A DlMM-3
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU CB-2 Pregate,Field BDF4/7351A DIMM-3
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU CB-3 S/D Reox BDF4/7351A DIMM-3
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU CB-4 LTO Denisify BDF4/7351A DIMM-3
------------------------------------------------------------------------------------------------------------------------------------
Rinser/Dryer Verteq RD-2A For WS-6 1600-3 5051
------------------------------------------------------------------------------------------------------------------------------------
Rinser/Dryer Verteq RD-2B For WS-6 1600-3 5110
------------------------------------------------------------------------------------------------------------------------------------
Wafer Transfer Fortrend FWT-4 Wafer Transfe F-5000 693368
------------------------------------------------------------------------------------------------------------------------------------
Wet Sink Noah WS-6 20:1 HF,H2SO4,H2S04 8
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU DB-1 Poly Dope, Pocl3, Dens BDF4/7351A DIMM-4
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU DB-2 Poly Dope, Pocl3, Dens BDF4/7351A DIMM-4
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU DB-3 Phos Drive,Arsnic Drive BDF4/7351A DIMM-4
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU DB-4 Xxxxx, Alloy BDF4/7351A DIMM-4
------------------------------------------------------------------------------------------------------------------------------------
Rinser/Dryer Verteq RD-7A For WS-7 1600-4 5073
------------------------------------------------------------------------------------------------------------------------------------
Rinser/Dryer Verteq RD-7B For WS-7 1600-4 5074
------------------------------------------------------------------------------------------------------------------------------------
Wafer Transfer MGI Electronics Phoenix-V4 Transfer Station PXM-5872V4-5-V 587068
------------------------------------------------------------------------------------------------------------------------------------
Wet Sink Noah WS-7 20:1 HF,H2S04,H2S04 8
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU EB-1 Cap OX, Interpoly OX BDF4/7351A DIMM-5
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU EB-2 Poly Dep BDF4/7351A DIMM-5
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU EB-3 LTO Dep, LTO Pass BDF4/7351A DIMM-5
-----------------------------------------------------------------------------------------------------------------------------------
Fab Equipment List.xls 1 OF 7 IMP Confidential 8/10/01
IMP [Chinese translation not available]
The List of IMP Equipment Transfered
------------------------------------------------------------------------------------------------------------------------------------
AREA TYPE MANUFACTURE XXXXX.XX COMMENTS MODEL # SERIAL #
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU EB-4 LTO Dep, LTO Pass BDF4/7351A DIMM-5
------------------------------------------------------------------------------------------------------------------------------------
Rinser/Dryer Semitool RD-3B 260C 3621C
------------------------------------------------------------------------------------------------------------------------------------
Rinser/Dryer Semitool RD-3A 260C 3620C
------------------------------------------------------------------------------------------------------------------------------------
Rinser/Dryer Verteq RD-8A 1600-3 5068
------------------------------------------------------------------------------------------------------------------------------------
Rinser/Dryer Verteq RD-8B 1600-3 5072
------------------------------------------------------------------------------------------------------------------------------------
Wafer Transfer MGI Electronics Phoemx-V4 Transfer Station PXM-6882V2 125-U 587052
------------------------------------------------------------------------------------------------------------------------------------
Wet Sink Noah WS-8 1:1 HF,H2S04,H2SO4 8
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU FB-l P-WELL 7351C DIMM-6
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU FB-2 P-WELL 7351C DIMM-6
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU FB-3 N-WELL 7351C DIMM-6
------------------------------------------------------------------------------------------------------------------------------------
Furance BTU FB-4 SOG Bake/Cure 7351C DIMM-6
------------------------------------------------------------------------------------------------------------------------------------
Rinser/Dryer Verteq RD-11A 1600-3 5069
------------------------------------------------------------------------------------------------------------------------------------
Vertical Furance Thermco/SVG VF-1 6105DOX 193
------------------------------------------------------------------------------------------------------------------------------------
Wafer Transfer Fortrend FWT-5 F-5000 693457
------------------------------------------------------------------------------------------------------------------------------------
Wet Clean/Etch FSI Mercury FS-1 Gate,Field,Base,Pregate 903736-001 0000-0000-0000
------------------------------------------------------------------------------------------------------------------------------------
Wet Sink Noah WS-10 RCA-SC2,RCA-SC1,20 4
------------------------------------------------------------------------------------------------------------------------------------
Film Analyzer Gaetner Ellipsomter Film Analyer L1116-B 1414-AK
------------------------------------------------------------------------------------------------------------------------------------
Film Measurement Nanometrics NS-3 3B 8466
------------------------------------------------------------------------------------------------------------------------------------
Inspection Scope Irvine Opti Corp UL-3 3D 8464
------------------------------------------------------------------------------------------------------------------------------------
V/l Measurement Signatone
------------------------------------------------------------------------------------------------------------------------------------
Crystal Damage Meas.Therma Wave TW-1 TP-2705 2005
------------------------------------------------------------------------------------------------------------------------------------
Film Measurement Nanometrics NS-1 180 0181-1009
------------------------------------------------------------------------------------------------------------------------------------
Inspection Scope Olympus Scope
------------------------------------------------------------------------------------------------------------------------------------
Inspection Scope Irvine Opti Corp UL-9 3B 846
------------------------------------------------------------------------------------------------------------------------------------
Measurement Tencor Alpha Step 200 200
------------------------------------------------------------------------------------------------------------------------------------
Oxide Etecher Xxx Research LO-1 Sog & BPSG Plannarization 590 1788
------------------------------------------------------------------------------------------------------------------------------------
Oxide Etecher Mtrix MO-1 Contact,Iso,Oxide Etch, 303 S164101-05
------------------------------------------------------------------------------------------------------------------------------------
Oxide Etecher Tegal TO-1 Contact, Via,Pad Mask 903E 10406
------------------------------------------------------------------------------------------------------------------------------------
Oxide Etecher Tegal TO-2 Contact, Via,Pad Mask 903E 10841
------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------
Oxide Etecher Xxx Research LO-2 Sog & BPSG Plannarization 595 9004
------------------------------------------------------------------------------------------------------------------------------------
Poly Etcher Lam Research LP 1 Poly Etcher 490 1791
------------------------------------------------------------------------------------------------------------------------------------
Poly Etcher Lam Research LP-2 Poly Etcher 490 60621
------------------------------------------------------------------------------------------------------------------------------------
Rinser/Dryer Verteq RD-12A ForWS-12 1600-3 5066
------------------------------------------------------------------------------------------------------------------------------------
Rinser/Dryer Verteq RD-12B ForWS-12 1600-3 5069
------------------------------------------------------------------------------------------------------------------------------------
UV Inspection Ultrastation UL-4 BOE 6:1 w/es 1(5017 pro) 3L
------------------------------------------------------------------------------------------------------------------------------------
Fab Equipment List.xls 2 OF 7 IMP Confidential 8/10/01
IMP [Chinese translation not available]
The List of IMP Equipment Transfered
------------------------------------------------------------------------------------------------------------------------------------
AREA TYPE MANUFACTURE XXXXX.XX COMMENTS MODEL # SERIAL #
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wet Sink Noah WS-12 BDF4/7351 A
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxx Xxxxxxx/IPC BA-l PM-1813 FM-827-l
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxx Xxxxxxx/IPC BA-2 PM-1813 FM8280-1
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxx Xxxxxxx/IPC BA-4 PM11220 FM762RO-1
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxx Xxxxxxx/IPC BE-2 L2101 M909800
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxx Gasonics GA-1 A95-037-01 04972-A
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxx Gasonics GA-2 A95-037-01 02968-A
------------------------------------------------------------------------------------------------------------------------------------
[ ] Bake Oven Blue M OV-3 DCC-256-C DCC-509
------------------------------------------------------------------------------------------------------------------------------------
[ ] Deep UV Fusion FS-4 M150PC
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-7 3B
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-11 3B 8492
------------------------------------------------------------------------------------------------------------------------------------
[ ] Particle Monitor Surfscan 4500 TS-1 86630 0490-406
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-16A For WS-13 0000-00 0000
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-16B For WS-13 0000-00 0000
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-2A For WS-2 1600-3 5303
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-2B For WS-2 1600-3 5041
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxxxx Xxxx Xxxx WS-13 8
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wafer Transfer Fortrend FWT-1 F-5225 693454
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wet Sink Noah WS-2 H2SO4,H2SO4,H2SO4 6
------------------------------------------------------------------------------------------------------------------------------------
[ ] Blue M Bake Oven DCC-256C OV-4 DCC-510
------------------------------------------------------------------------------------------------------------------------------------
[ ] Blue M Bake Oven DCC 256C OV-5 DCC-506
------------------------------------------------------------------------------------------------------------------------------------
[ ] CD Measurement Nanometrics NL-2 3B 8482
------------------------------------------------------------------------------------------------------------------------------------
[ ] CV-Plotter MDC/Signature CV-1 GP S-104 105DDI 528-4/87
------------------------------------------------------------------------------------------------------------------------------------
[ ] Deep UV Fusion FS-1 M150PC 156
------------------------------------------------------------------------------------------------------------------------------------
[ ] Deep UV Fusion FS-2 M150PC 19
------------------------------------------------------------------------------------------------------------------------------------
[ ] Deep UV Fusion FS-3 M150PC PA5G718BR
------------------------------------------------------------------------------------------------------------------------------------
[ ] Film Measurement Nanometrics NS-2 3B 8485
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-8 3B
------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------
[ ] Nitride Etch Xxx Research LN-2 490 490
------------------------------------------------------------------------------------------------------------------------------------
[ ] Poly Etcher Lam Research LP-3 4420B 3414
------------------------------------------------------------------------------------------------------------------------------------
[ ] Prober Signatone 153 1007
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-18A For WS-14 1600-3 5429
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-18B For WS-14 1600-3 5430
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wet Sink Noah WS-14 Al Pad,Poly Etch for 50 8
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxx Xxxxxxx/IPC BA-3 23100-11220 PM0410-1
------------------------------------------------------------------------------------------------------------------------------------
Fab Equipment List.xls 3 OF 7 IMP Confidential 8/10/01
IMP [Chinese translation not available]
The List of IMP Equipment Transfered
------------------------------------------------------------------------------------------------------------------------------------
AREA TYPE MANUFACTURE XXXXX.XX COMMENTS MODEL # SERIAL #
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxx Xxxxxxx/IPC BE-l PM-112200 M60B3RO-4
------------------------------------------------------------------------------------------------------------------------------------
[ ] Hi-Current Implant Xxxxx 10-160-1 Nova 10-160
------------------------------------------------------------------------------------------------------------------------------------
[ ] Hi-Pox Gastronics
------------------------------------------------------------------------------------------------------------------------------------
[ ] Implanter Varian 350D-1 350D 50788
------------------------------------------------------------------------------------------------------------------------------------
[ ] Implanter Varian 350D-2 350D 51083
------------------------------------------------------------------------------------------------------------------------------------
[ ] Implanter Varian 350D-3 350D
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-6
------------------------------------------------------------------------------------------------------------------------------------
[ ] Metal Etcher Drytech DM-1 Quad
------------------------------------------------------------------------------------------------------------------------------------
[ ] Metal Etcher Lam Research DM-2 Asiq
------------------------------------------------------------------------------------------------------------------------------------
[ ] Oxide Etcher Lam Research LO-3 Asiq
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-14A 0000-00 0000
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-14B 0000-00 0000
------------------------------------------------------------------------------------------------------------------------------------
[ ] W CVD/Etch Applied Materials Prec. 5000
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wafer Transfer Fortend FWT-2 F-5225 693453
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wet Sink Noah WS-3 Metal Etch,H2SO4,6:l 8
------------------------------------------------------------------------------------------------------------------------------------
Bake Oven Blue M OV-1 GP DCC-256C DCC-508
------------------------------------------------------------------------------------------------------------------------------------
Bake Oven Blue M OV-2 GP DCC-256C DCC-507
------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------
Spinner Solitic SS-6 OFPR 30, Nova 2015 820-ACB 8890611
------------------------------------------------------------------------------------------------------------------------------------
Spinner Solitic SS-7
------------------------------------------------------------------------------------------------------------------------------------
Spinner SVG SS-8 ARC 8636 36-19322
------------------------------------------------------------------------------------------------------------------------------------
Spinner SVG SS-9 Nova 2071, 2071 Dyed2 8626/36 940506-TY3736
------------------------------------------------------------------------------------------------------------------------------------
Spinner SVG SS-10 Nova 2071, ARC 8626/36 940506-TY3736
------------------------------------------------------------------------------------------------------------------------------------
Spinner SVG SS-11 Nova 2021, Acetone, No 8626/36 012795-TY40703
------------------------------------------------------------------------------------------------------------------------------------
Spinner SVG SS-12 Nova 2071, Acetone, No 8626/36 012795-TY40703
------------------------------------------------------------------------------------------------------------------------------------
Spinner SVG SS-15 Nova 2071, Nova 2015 8626/8636 950928-TY4207
------------------------------------------------------------------------------------------------------------------------------------
Spinner SVG SS-16 Nova 2071, Nova 2015 8626/8636 950928-TY4207
------------------------------------------------------------------------------------------------------------------------------------
Spinner SVG SS-17 8600
------------------------------------------------------------------------------------------------------------------------------------
Spinner SVG SS-18 8600
------------------------------------------------------------------------------------------------------------------------------------
Spinner SVG SS-19 8600
------------------------------------------------------------------------------------------------------------------------------------
Spinner SVG SS-20 8600
------------------------------------------------------------------------------------------------------------------------------------
Spinner SVG SS-21 8600
------------------------------------------------------------------------------------------------------------------------------------
Fab Equipment List.xls 4 OF 7 IMP Confidential 8/10/01
IMP [Chinese translation not available]
The List of IMP Equipment Transfered
------------------------------------------------------------------------------------------------------------------------------------
AREA TYPE MANUFACTURE XXXXX.XX COMMENTS MODEL # SERIAL #
------------------------------------------------------------------------------------------------------------------------------------
[ ] Vapor Primer IMTEC IMT-1 GP STAR-2000 V01794
------------------------------------------------------------------------------------------------------------------------------------
[ ] Vapor Primer IMTEC IMT-2 GP STAR-2000 V01015
------------------------------------------------------------------------------------------------------------------------------------
[ ] Vapor Primer IMTEC IMT-3 GP YES-5 87600
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspecton Scope Olympus Scope GP BHMJL 201325
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspecton Scope Nikon Scope
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspecton Scope PPL/Olympus Scope GP U-PMYVC 4J00418
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspecton Scope Irvine Opti Corp UL-12 GP
------------------------------------------------------------------------------------------------------------------------------------
[ ] Laser Scribe Lumonics LS-1 Wafer Xxxx XX 145
------------------------------------------------------------------------------------------------------------------------------------
[ ] Laser Scribe Lumonics LS-2 Wafer Xxxx XX 145
------------------------------------------------------------------------------------------------------------------------------------
[ ] Megasonics Verteq MS-1
------------------------------------------------------------------------------------------------------------------------------------
[ ] Prober Electroglas EG-109 GP 2001X WP88073005/1293
------------------------------------------------------------------------------------------------------------------------------------
[ ] Prober Signatone GP S-1007X-5 291-3/90
------------------------------------------------------------------------------------------------------------------------------------
[ ] QC Lamp Scientific Product GP L6094
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinse/Dryer Verteq RD-15A For MSI 1600-4 5368
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinse/Dryer Verteq RD-15B For MSI 1600-4 5368
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spin on Glass Semix Sog-2 GP TR61324(D) 695142
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spin on Glass Semix Sog-3 GP TR61324(D) 63A367
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wafer Flat Measure Tropel 9000 203861
------------------------------------------------------------------------------------------------------------------------------------
[ ] 5X Stepper ASM Litho AS-1 PAS2500/40 53219
------------------------------------------------------------------------------------------------------------------------------------
[ ] 5X Stepper ASM Litho AS-2 PAS2500/50 9481
------------------------------------------------------------------------------------------------------------------------------------
[ ] 5X Stepper ASM Litho AS-3
------------------------------------------------------------------------------------------------------------------------------------
[ ] Measurement Imspex TPC 8525 8525
------------------------------------------------------------------------------------------------------------------------------------
[ ] Std. Field Stepper U Tech Stepper US-1 GP 1000 158
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] Std. Field Stepper U Tech Stepper US-4 GP 1000 264
------------------------------------------------------------------------------------------------------------------------------------
[ ] Std. Field Stepper U Tech Stepper US-5 GP 1000 276
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] Std. Field Stepper U Tech Stepper US-6 GP 1000 417
------------------------------------------------------------------------------------------------------------------------------------
[ ] Std. Field Stepper U Tech Stepper US-9 GP 1000 416
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspetion Scope Nikon Scope GP 251592
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wide field Stepper U Tech Stepper US-11 GP 1000 472
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wide field Stepper U Tech Stepper US-12 GP 1000 475
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wide field Stepper U Tech Stepper US-15 GP 1500 696
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wide Field Stepper U Tech Stepper US-17 GP 1100 487
------------------------------------------------------------------------------------------------------------------------------------
Fab Equipment List.xls 5 OF 7 IMP Confidential 8/10/01
IMP [Chinese translation not available]
The List of IMP Equipment Transfered
------------------------------------------------------------------------------------------------------------------------------------
AREA TYPE MANUFACTURE XXXXX.XX COMMENTS MODEL # SERIAL #
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wide Field Stepper U Tech Stepper US-18 GP 1100 474
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wide Field Stepper U Tech Stepper US-19 All First Layers 1100 952
------------------------------------------------------------------------------------------------------------------------------------
[ ] CD Measurement Nano Metrics NL-1 GP 7000-0237 589-5243
------------------------------------------------------------------------------------------------------------------------------------
[ ] Immersion Develop Ultra Tec Corp ID-2 015 resist only, exclude 504 OIL
------------------------------------------------------------------------------------------------------------------------------------
[ ] Immersion Develop UTE ID-3 NON 2015 resist only, exclude 4051 9401-4407
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Olympus Scope GP 251592
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-1 GP 3D 8494
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-2 GP 3D 8493
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-12 GP 3D
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-10A 1600-3 5011
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-10B 1600-3 5047
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-17A 1600-3 5190
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-17B 1600-3 5191
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] Track Developer SD-4,5 8632 950905TY-42070
------------------------------------------------------------------------------------------------------------------------------------
[ ] Track Developer SVG SD-6,7,8
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-5
------------------------------------------------------------------------------------------------------------------------------------
[ ] PECVD Reactor Novellus NV-1 Plasma Pass/ Inter-metal Concept One 89-17-66
------------------------------------------------------------------------------------------------------------------------------------
[ ] PECVD Reactor Novellus NV-2 Concept One 89-24-7B
------------------------------------------------------------------------------------------------------------------------------------
[ ] PECVD Reactor Novellus NV-3 Concept One 00-00-000
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rapd Thermal Xxxxx XXX AST-1 AS5-2000 91-11-0050
------------------------------------------------------------------------------------------------------------------------------------
[ ] Relective MES MTW Inc. Rdflectometer RMS-11 104078
------------------------------------------------------------------------------------------------------------------------------------
[ ] Resistance Probe Veeco Instrment 4 point Probe FPP5000 762D
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-9A For WS-9 1600-3 5137
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-9B For WS-9 1600-3 5138
------------------------------------------------------------------------------------------------------------------------------------
[ ] Sputter Varian 3180-1 3180 84218-165
------------------------------------------------------------------------------------------------------------------------------------
[ ] Sputter Varian 3180-2 3180 88722-055
------------------------------------------------------------------------------------------------------------------------------------
[ ] Sputter MRC MRC-1 ECLIPS XXXX XX 47758
------------------------------------------------------------------------------------------------------------------------------------
[ ] 04 1406-47758
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wet Sink Noah WS-9 50:1 BOE,H2SO4,H2O2 8
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] Hitachi
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
Fab Equipment List.xls 6 OF 7 IMP Confidential 8/10/01
IMP [Chinese translation not available]
The List of IMP Equipment Transfered
------------------------------------------------------------------------------------------------------------------------------------
AREA TYPE MANUFACTURE XXXXX.XX COMMENTS MODEL # SERIAL #
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] SUMMARY
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] FAB
------------------------------------------------------------------------------------------------------------------------------------
[ ] Reliability
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
Fab Equipment List.xls 7 OF 7 IMP Confidential 8/10/01
[Chinese translation not available]
The First Lot of IMP Equipment Transfered
------------------------------------------------------------------------------------------------------------------------------------
AREA TYPE MANUFACTURE XXXXX.XX COMMENTS MODEL # SERIAL #
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU AB-1 BPSG BD4/7351A DIMM-1
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU AB-2 Poly BDF4/7351A DIMM-1
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU AB-3 Nitride BDF4/7351A DIMM-1
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU AB-4 Nitride BDF4/7351A DIMM-1
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-4A FOR WS-4 1600-3 5060
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU BB-1 Initial OX,Isolation,Field BDF4/7351A DIMM-2
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU BB-2 Initial OX,Isolation,Field BDF4/7351A DIMM-2
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU BB-3 Initial Pregate,base,field BDF4/7351A DIMM-2
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU BB-4 Initial Pregate,base,field BDF4/7351A DIMM-2
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-5B FOR WS-5 1600-3 5075
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wafer Transfer Fortrend FWT-3 Wafer Transfe F-5000 1092382
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wet Sink Noah WS-5 RCA-SC2,RCA-SC1,20 8
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU CB-1 Initial OX,Isolation,Field BDF4/7351A DIMM-3
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU CB-2 Pregate,Field BDF4/7351A DIMM-3
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU CB-3 S/D Reox BDF4/7351A DIMM-3
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU CB-4 LTO Denisify BDF4/7351A DIMM-3
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-2A For WS-6 1600-3 5051
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wafer Transfer Fortrend FWT-4 Wafer Transfe F-5000 693368
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wet Sink Noah WS-6 20:1 HF,H2S04,H2S04 8
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU DB-1 Poly Dope, Pocl3, Dens BDF4/7351A DIMM-4
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU DB-2 Poly Dope, Pocl3, Dens BDF4/7351A DIMM-4
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU DB-3 Phos Drive,Arsnic Drive BDF4/7351A DIMM-4
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU DB-4 Xxxxx, Alloy BDF4/7351A DIMM-4
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-7A For WS-7 1600-4 5073
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wafer Transfer MGI Electronics Phoenix-V4 Transfer Station PXM-5872V4-5-V 587068
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wet Sink Noah WS-7 20:1 HF,H2S04,H2S04 8
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU EB-1 Cap OX, Interpoly OX BDF4/7351A DIMM-5
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU EB-2 Poly Dep BDF4/7351A DIMM-5
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU EB-3 LTO Dep, LTO Pass BDF4/7351A DIMM-5
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU EB-4 LTO Dep, LTO Pass BDF4/7351A DIMM-5
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Semitool RD-3B 260C 3621C
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wafer Transfer MGI Electronics Phoenix-V4 Transfer Station PXM-6882V2 125-U 587052
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wet Sink Noah WS-8 1:1 HF,H2SO4,H2SO4 8
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU FB-1 P-WELL 7351C DIMM-6
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU FB-2 P-WELL 7351C D1MM-6
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU FB-3 N-WELL 7351C DIMM-6
------------------------------------------------------------------------------------------------------------------------------------
1 OF 4
[Chinese translation not available]
The First Lot of IMP Equipment Transfered
------------------------------------------------------------------------------------------------------------------------------------
AREA TYPE MANUFACTURE XXXXX.XX COMMENTS MODEL # SERIAL #
------------------------------------------------------------------------------------------------------------------------------------
[ ] Furance BTU FB-4 SOG Bake/Cure 7351C DIMM-6
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-11A 1600-3 5069
------------------------------------------------------------------------------------------------------------------------------------
[ ] Vertical Furance Thermco/SVG VF-1 6105DOX 193
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wafer Transfer Fortrend WT-5 F-5000 693457
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wet Clean/Etch FSI Mercury S-l Gate,Field,Base,Pregate 903736-001 0000-0000-0000
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wet Sink Noah WS-10 RCA-SC2,RCA-SC1,20 4
------------------------------------------------------------------------------------------------------------------------------------
[ ] Film Analyzer Gaetner Ellipsomter Film Analyer L116-B 1414-AK
------------------------------------------------------------------------------------------------------------------------------------
[ ] Film Measurement Nanometrics NS-3 3B 8466
------------------------------------------------------------------------------------------------------------------------------------
[ ] Film Measurement Nanometrics NS-1 180 0181-1009
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Olympus scope
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-9 3B 846
------------------------------------------------------------------------------------------------------------------------------------
[ ] Oxide Etecher Xxx Research LO-1 Sog & BPSG Plannarization 590 1788
------------------------------------------------------------------------------------------------------------------------------------
[ ] Oxide Etecher Tegal TO-1 Contact, Via,Pad Mask 903E 10406
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] Oxide Etecher Xxx Research LO-2 Sog & BPSG Plannarization 595 9004
------------------------------------------------------------------------------------------------------------------------------------
[ ] Poly Etcher Lam Research LP-1 Poly Etcher 490 1791
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-12A For WS-12 1600-3 5066
------------------------------------------------------------------------------------------------------------------------------------
[ ] UV Inspection Ultrastation UL-4 BOE 6:1 w/es1(5017 pro) 3L
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxx Xxxxxxx/IPC BA-1 PM-1813 FM-827-1
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxx Xxxxxxx/IPC BA-2 PM-1813 FM8280-1
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxx Gasonics GA-1 A95-037-01 04972-A
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxx Gasonics GA-2 A95-037-01 02968-A
------------------------------------------------------------------------------------------------------------------------------------
[ ] Deep UV Fusion FS-4 M150PC
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-7 3B
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-16A For WS-13 0000-00 0000
------------------------------------------------------------------------------------------------------------------------------------
[ ] Solvent Sink Noah WS-13 8
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wet Sink Noah WS-2 H2SO4,H2SO4,H2S04 6
------------------------------------------------------------------------------------------------------------------------------------
[ ] Blue M Bake Oven DCC-256C OV-4 DCC-510
------------------------------------------------------------------------------------------------------------------------------------
[ ] CD Measurement Nanometrics NL-2 3B 8482
------------------------------------------------------------------------------------------------------------------------------------
[ ] CV-Plotter MDC/Signature CV-1 GP S-l04 105DDI 528-4/87
------------------------------------------------------------------------------------------------------------------------------------
[ ] Deep UV Fusion FS-1 M150PC 156
------------------------------------------------------------------------------------------------------------------------------------
[ ] Film Measurement Nanometrics NS-2 3B 8485
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-8 3B
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] Nitride Etch Xxx Research LN-2 490 490
------------------------------------------------------------------------------------------------------------------------------------
[ ] Poly Etcher Lam Research LP-3 4420B 3414
------------------------------------------------------------------------------------------------------------------------------------
2 OF 4
[Chinese translation not available]
The First Lot of IMP Equipment Transfered
------------------------------------------------------------------------------------------------------------------------------------
AREA TYPE MANUFACTURE XXXXX.XX COMMENTS MODEL # SERIAL #
------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------
[ ] Prober Signatone 153 1007
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq HD-18A For WS-14 1600-3 5429
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wet Sink Noah WS-14 Al,Pad,Poly Etch for 50 8
------------------------------------------------------------------------------------------------------------------------------------
[ ] Hi-Current Implant Xxxxx 10-160-1 Nova 10-160
------------------------------------------------------------------------------------------------------------------------------------
[ ] Implanter Varian 350D-1 35OD 50788
------------------------------------------------------------------------------------------------------------------------------------
[ ] Implanter Varian 350D-2 35OD 51083
------------------------------------------------------------------------------------------------------------------------------------
[ ] Metal Etcher Lam Research DM-2 Asiq
------------------------------------------------------------------------------------------------------------------------------------
[ ] Oxide Etecher Xxx Research LO-3 Asiq
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-14A 0000-00 0000
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wafer Transfer Fortend FWT-2 F-5225 693453
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wet Sink Noah WS-3 Metal Etch,H2SO4,6:l 8
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spinner Solitic SS-6 OFPR 30,Nova 2015 820-ACB 8890611
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spinner Solitic SS-7
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spinner SVG SS-8 ARC 8636 36-19322
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spinner SVG SS-9 Nova 2071,2071 Dyed2 8626/36 940506-TY3736
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spinner SVG SS-10 Nova 2071, ARC 8626/36 940506-TY3736
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spinner SVG SS-11 Nova 2021,Acetone,No 8626/36 012795-TY40703
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spinner SVG SS-17 8600
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spinner SVG SS-18 8600
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] Vapor Primer IMTEC IMT-1 GP STAR-2000 V01794
------------------------------------------------------------------------------------------------------------------------------------
[ ] Vapor Primer IMTEC IMT-3 GP YES-5 87600
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspecton Scope Olympus Scope GP BHMJL 201325
------------------------------------------------------------------------------------------------------------------------------------
[ ] Laser Scribe Lumonics LS-1 Wafer Xxxx XX 145
------------------------------------------------------------------------------------------------------------------------------------
[ ] Megasonics Verteq MS-1
------------------------------------------------------------------------------------------------------------------------------------
[ ] Prober Electroglas EG-109 GP 2001X WP88073005/1293
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinse/Dryer Verteq RD-15A For MS1 1600-4 5368
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spin on Glass Semix Sog-2 GP TR61324(D) 695142
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wafer Flat Measure Tropel 9000 203861
------------------------------------------------------------------------------------------------------------------------------------
[ ] 5X Stepper ASM Litho AS-1 PAS2500/40 53219
------------------------------------------------------------------------------------------------------------------------------------
[ ] 5X Stepper ASM Litho AS-2 PAS2500/50 9481
------------------------------------------------------------------------------------------------------------------------------------
[ ] 5X Stepper ASM Litho AS-3
------------------------------------------------------------------------------------------------------------------------------------
3 OF 4
[Chinese translation not available]
The First Lot of IMP Equipment Transfered
------------------------------------------------------------------------------------------------------------------------------------
AREA TYPE MANUFACTURE XXXXX.XX COMMENTS MODEL # SERIAL #
------------------------------------------------------------------------------------------------------------------------------------
[ ] Measurement Imspex TPC 8525 8525
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] Std.Field Stepper U Tech Stepper US-4 GP 1000 264
------------------------------------------------------------------------------------------------------------------------------------
[ ] Std.Field Stepper U Tech Stepper US-5 GP 1000 276
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspetion Scope Nikon Scope GP 251592
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wide field Stepper U Tech Stepper US-11 GP 1000 472
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wide field Stepper U Tech Stepper US-12 GP 1000 475
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wide Field Stepper U Tech Stepper US-19 All First Layers 1100 952
------------------------------------------------------------------------------------------------------------------------------------
[ ] CD Measurement Nano Metrics NL-1 GP 7000-0237 0589-5243
------------------------------------------------------------------------------------------------------------------------------------
[ ] Immersion Develop Ultra Tec Corp ID-2 2015 resist only, exclude 504 OIL
------------------------------------------------------------------------------------------------------------------------------------
[ ] Immersion Develop UTE ID-3 NON 2015 resist only, exclude 4051 9401-4407
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Olympus Scope GP 251592
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-10A 1600-3 5011
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-10B 1600-3 5047
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] Track Developer SD-4,5 8632 950905TY-42070
------------------------------------------------------------------------------------------------------------------------------------
[ ] Track Developer SVG SD-6,7,8
------------------------------------------------------------------------------------------------------------------------------------
[ ] PECVD Reactor Novellus NV-1 Plasma Pass/ Inter-metal Concept One 89-17-66
------------------------------------------------------------------------------------------------------------------------------------
[ ] PECVD Reactor Novellus NV-2 Concept One 89-24-7B
------------------------------------------------------------------------------------------------------------------------------------
[ ] PECVD Reactor Novellus NV-3 Concept One 00-00-000
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rapd Thermal Xxxxx XXX AST-1 AS5-2000 91-11-0050
------------------------------------------------------------------------------------------------------------------------------------
[ ] Relective MES MTW Inc. Rdflectometer RMS-11 104078
------------------------------------------------------------------------------------------------------------------------------------
[ ] Resistance Probe Veeco Instrment 4 point Probe FPP5000 762D
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-9A For WS-9 1600-3 5137
------------------------------------------------------------------------------------------------------------------------------------
[ ] Sputter Varian 3180-1 3180 84218-165
------------------------------------------------------------------------------------------------------------------------------------
[ ] Sputter Varian 3180-2 3180 88722-055
------------------------------------------------------------------------------------------------------------------------------------
[ ] Sputter MRC MRC 1 ECLIPS XXXX XX 47758
------------------------------------------------------------------------------------------------------------------------------------
[ ] 04 1406-47758
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wet Sink Noah WS-9 50:1 BOE,H2SO4,H202 8
------------------------------------------------------------------------------------------------------------------------------------
4 OF 4
[Chinese translation not available]
The Second Lot of IMP Equipment Transfered
------------------------------------------------------------------------------------------------------------------------------------
AREA TYPE MANUFACTURE XXXXX.XX COMMENTS MODEL # SERIAL #
------------------------------------------------------------------------------------------------------------------------------------
[ ] Ellipsometer Rudolp Auto EI 70387
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-4B FOR WS-4 1600-3 5061
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-5A FOR WS-5 1600-3 5076
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wafer Transfer Fortrend FWT-6 Wafer Transfe F-5000
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-2B for WS-6 1600-3 5110
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-7B for WS-7 1600-4 5074
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Semitool RD-3A 260C 3620C
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-8A 1600-3 5068
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-8B 1600-3 5072
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-3 3D 8464
------------------------------------------------------------------------------------------------------------------------------------
[ ] V/l Measurement Signatone
------------------------------------------------------------------------------------------------------------------------------------
[ ] Crystal Damage Meas.Therma Wave TW-1 TP-2705 2005
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-9 3B 846
------------------------------------------------------------------------------------------------------------------------------------
[ ] Oxide Etecher Xxx Research LO-1 Sog & BPSG Plannarization 590 1788
------------------------------------------------------------------------------------------------------------------------------------
[ ] Oxide Etecher Tegal TO-2 Contact, Via,Pad Mask 903E 10841
------------------------------------------------------------------------------------------------------------------------------------
[ ] Poly Etcher Lam Research LP-2 Poly Etcher 490 60621
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-12B For WS-12 1600-3 5069
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wet Sink Noah WS-12 BDF4/7351A
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxx Xxxxxxx/IPC BA-4 PM11220 FM762RO-1
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxx Xxxxxxx/IPC BE-2 L2101 M909800
------------------------------------------------------------------------------------------------------------------------------------
[ ] Bake Oven Blue M OV-3 DCC-256-C DCC-509
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-11 3B 8492
------------------------------------------------------------------------------------------------------------------------------------
[ ] Particle Monitor Surfscan 4500 TS-1 86630 0490-406
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-16B For WS-13 0000-00 0000
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-2A For WS-2 1600-3 5303
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-2B For WS-2 1600-3 5041
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wafer Transfer Fortrend FWT-1 f-5225 693454
------------------------------------------------------------------------------------------------------------------------------------
[ ] Blue M Bake Oven DCC-256C 0V-5 DCC 506
------------------------------------------------------------------------------------------------------------------------------------
[ ] Deep UV Fusion FS-2 M150PC 19
------------------------------------------------------------------------------------------------------------------------------------
[ ] Deep UV Fusion FS-3 M150PC PA5G718BR
------------------------------------------------------------------------------------------------------------------------------------
[ ] Film Measurement Nanometrics NS-2 3B 8485
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-18B For WS-14 1600-3 5430
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxx Xxxxxxx/IPC BA-3 23100-11220 PM0410-1
------------------------------------------------------------------------------------------------------------------------------------
[ ] Xxxxx Xxxxxxx/IPC BE-1 PM-112200 M60B3RO-4
------------------------------------------------------------------------------------------------------------------------------------
[ ] Hi-Pox Gastronics
------------------------------------------------------------------------------------------------------------------------------------
[ ] Implanter Varian 350D-3 35OD
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-6
------------------------------------------------------------------------------------------------------------------------------------
1 OF 3
[Chinese translation not available]
The Second Lot of IMP Equipment Transfered
------------------------------------------------------------------------------------------------------------------------------------
AREA TYPE MANUFACTURE XXXXX.XX COMMENTS MODEL # SERIAL #
------------------------------------------------------------------------------------------------------------------------------------
[ ] Metal Etcher Drytech DM-l Quad
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-14B 0000-00 0000
------------------------------------------------------------------------------------------------------------------------------------
[ ] W CVD/Etch Applied Materials Prec.5000
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wafer Transfer Fortend FWT-2 F-5225 693453
------------------------------------------------------------------------------------------------------------------------------------
[ ] Bake Oven Blue M 0V-1 GP DCC 256C DCC 508
------------------------------------------------------------------------------------------------------------------------------------
[ ] Bake Oven Blue M OV-2 GP DCC-256C DCC 507
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spinner SVG SS-12 Nova 2071, Acetone,No 8626/36 012795-TY40703
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spinner SVG SS-15 Nova 2071, Nova 2015 8626/8636 950928-TY4207
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spinner SVG SS-16 Nova 2071, Nova 2015 8626/8636 950928-TY4207
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spinner SVG SS-19 8600
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spinner SVG SS-20 8800
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spinner SVG SS-21 8600
------------------------------------------------------------------------------------------------------------------------------------
[ ] Vapor Primer IMTEC IMT-2 GP STAR-2000 V01015
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspecton Scope Nikon Scope
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspecton Scope PPL/Olympus Scope GP U-PMYVC 4J00418
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspecton Scope Irvine Opti Corp UL-12 GP
------------------------------------------------------------------------------------------------------------------------------------
[ ] Laser Scribe Lumonics LS-2 Wafer Xxxx XX 145
------------------------------------------------------------------------------------------------------------------------------------
[ ] Prober Signatone GP S-1007X-5 291-3/90
------------------------------------------------------------------------------------------------------------------------------------
[ ] QC Lamp Scientific Product GP L6094
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinse/Dryer Verteq RD-15A For MS1 1600-4 5368
------------------------------------------------------------------------------------------------------------------------------------
[ ] Spin on Glass Semix Sog-2 GP TR61324(D) 695142
------------------------------------------------------------------------------------------------------------------------------------
[ ] Std.Field Stepper U Tech Stepper US-1 GP 1000 158
------------------------------------------------------------------------------------------------------------------------------------
[ ] Std.Field Stepper U Tech Stepper US-6 GP 1000 417
------------------------------------------------------------------------------------------------------------------------------------
[ ] Std.Field Stepper U Tech Stepper US-9 GP 1000 416
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wide field Stepper U Tech Stepper US-15 GP 1500 696
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wide Field Stepper U Tech Stepper JS-17 GP 1100 487
------------------------------------------------------------------------------------------------------------------------------------
[ ] Wide Field Stepper U Tech Stepper LJS-18 GP 1100 474
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-1 GP 3D 8494
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-2 GP 3D 8493
------------------------------------------------------------------------------------------------------------------------------------
[ ] Inspection Scope Irvine Opti Corp UL-12 GP 3D
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-17A 1600-3 5190
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-17B 1600-3 5191
------------------------------------------------------------------------------------------------------------------------------------
[ ] PECVD Reactor Novellus NV-1 Plasma Pass/ Inter-metal Concept One 89-17-66
------------------------------------------------------------------------------------------------------------------------------------
[ ] Rinser/Dryer Verteq RD-9B For WS-9 1600-3 5138
------------------------------------------------------------------------------------------------------------------------------------
2 OF 3
[Chinese translation not available]
The Second Lot of IMP Equipment Transfered
------------------------------------------------------------------------------------------------------------------------------------
AREA TYPE MANUFACTURE XXXXX.XX COMMENTS MODEL # SERIAL #
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ] Hitachi
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
[ ]
------------------------------------------------------------------------------------------------------------------------------------
3 OF 3
Attachment 4 Products Market and Development
According to the Memorandum of Understanding Relating to Joint Venture
between IMP Inc and NingBo Minghua Microelectronic Co Ltd of China, the detail
is added as following:
1. With the regulation of item 1 of the Memo:
"b) Process technology IMP will license to the joint venture its mixed
signal processes ranging from 2.5-700V. These process technologies are
specially developed for analog and mixed signal designs and ideal for low
power and high efficient power management Ics.
f) Standard products The joint venture can expand its scope to cover
development of new standard ICs for china market."
The joint venture can:
1) Sell and spread IMP's present standard products keep the balanced price
system with IMP.
2) Use the process technology to develop new products keep the balanced
product configuration with IMP.
3) Develop new agents (abroad and in China), keep the balanced market net
with IMP.
4) Above items 1,2,3 are subject to seperated agreement.
With the following of the Memo:
"e) Business: IMP will bring business volume to the joint venture wafer
foundry business from its wafer foundry business and from its standard product
business. IMP can bring to the joint venture the following business revenue:
year 1-u.s.$1.2M: year 2-u.s.$1.8M year 3-u.s.$24M."
IMP shall supply with:
1) The detailed list of all products to be transferred, and the
description of the product, including: product type, performance and application
range, specifications, process type and level, package and the compatible
products.
2) The fabrication cost, market price, marketing form, list of customer
and agent, market share etc, for the main products.
The revenue of the last three years, the contracts on operation, the order
volume, the main area and application of sale.
3) The proportion of foundry entrusted processings is 65%, and IMP's
standard products is 35%, respectively.
4) The expected gross and net profit is 40% and 18% respectively, when
fulfilling the revenue which IMP bring to the joint venture.
In case of less than 70% of expected profit, IMP should make compensation.
With the following of the Memo:
"d) Training of the personnel. IMP will train engineers and technicians
from Minghua Micro Electronics Co. In IMP's San Xxxx wafer fabrication plant
before the equipment is relocated to China, and also in joint venture
fabrication plant in NingBo, China, after the equipment is set up."
IMP should help the market personnel of Minghua to know and handle the
foundry business and standard products business, and give necessary support, so
as to develop the market for the joint venture.
With the regulation of item 2 of the Memo:
"c) Minghua will move their current 4" wafer fabrication operations and
processes from BengBu, Anhui to NingBo for the joint venture. The capacity for
this 4" facility is approximately 2000 wafers per month."
The joint venture can produce present products using the 4" processing
line and develop new products using that line, the joint venture should keep the
line in operation.
With the regulation of item 7 of the Memo:
"Management and control of the operation. IMP currently has several large
wafer fabrication foundry customers such as Microsemi.Intemational rectifier,
National semiconductor, Dialog and Tektronix. In order to maintain continuity
relative to those businesses it is necessary that IMP will need to manage the
joint venture and has the control of the operation for the first three years of
operations. After the first three years, Xxxxxxx will assume the lead role of
management and control of the operation."
Therefore,
1) The joint venture can use the processing line to develop the new
products except the business supplied by IMP in the first three years.
2) After that period, IMP should supply the order and keep a good
relationship with Xxxxxxx.
For Party A (Minghua) For Party B (IMP)
/s/ (sd ---) /s/ (sd ---)
(Signature) (Signature)
Attachment 5 Accounting Procedure
Article 1 Accounting Regulation
1.1 In accordance with the Accounting System of the Joint Venture Using
Chinese and Foreign Investment of the People's Republic of China, this
Accounting Procedure is drawn up. As the attachment of the contact for the joint
venture of IMP and Minghua, the duration of the regulations of this Accounting
Procedure shall agree with the contact.
1.2 The accounting system and procedure is a part of the business of the
joint venture, and shall be responsible to produce accurate and truthful report
required.
The accounting system and procedure applicable to China and its
subordinates shall be adopted by the joint venture.
1.3 The accounting reports and records of the joint venture shall follow
the General Regulation of Accounting and the Implement Rules for Enterprise
Accounting, published by the Ministry of Finance of the People's Republic of
China.
1.4 All Reports shall be recorded in Chinese and English.
1.5 Renminbi (RMB) shall be basic monetary adopted by the joint venture.
1.6 The board of directors shall approve the operating capital and
expenses in the budget. The general manager has the authority to use the loans
from the banks in China. The general manager has the authority to demand
shareholders to pay the registered capital as agreed.
1.7 Any short term operation and cash flow transactions exceeding budget
shall require the approval of the board of directors, and handled with relevant
tactics and accounting procedure.
Article 2 Calculation of the Paid Up Capital
The paid up capital of equipment and premise shall be calculated when the
equipment is in the site of the joint venture or the construction is finished.
For the investment of industrial property, Party B shall list the contents
(including main processing categories and the typical products of each
category). The paid up capital of industrial property shall be calculated as
following : 15% of the total investment of industrial property shall be
calculated when the joint venture receives the transfer of IMP's related
document of processing and products; 35% shall be calculated when the production
line of the joint venture is set up; 40% shall be calculated when the joint
venture produces the typical products; and 10% when the economic benefit of the
joint venture is resulted.
Article 3 Management of Cash and Foreign Currency
3.1 In accounting, when converting foreign currency into RMB, the foreign
exchange rates is fixed on the 1st day of each month, published by the State
Administration of Foreign Exchange.
Article 4 Asset & Inventory Calculation
4.1 Inventory will be calculated based on lower of cost of manufacturing
or sale price.
Article 5 Fixed Asset Calculation
5.1 Fixed assets (Equipment, Machines, Tools, Factory & Other Buildings)
shall be based on five year depreciation.
5.2 Any fixed asset transaction has to be approved by the board of
directors.
Article 6 Intangible Assets and Other Assets
6.1 Intangible Assets (Intellectual Property, Goodwill, etc ) shall at the
depreciation rate: full depreciation in five years.
6.2 Construction Fees: full depreciation in five years.
Article 7 Calculation of Cost and Expenses
7.1 IMP will provide with cost factors input.
Article 8 Calculation of Sales and Profits
8.1 Methodology Standard
8.2 Profit Sharing: Profits shall be shared according to the equity
structure of the joint venture.
8.3 The general manager shall present the profit sharing proposal to the
board of directors within 2 months of the financial year end.
Article 9 Account Classification and Accounting Report
9.1 The un-audited accounting report shall be presented to the management
office and shareholders on or before the 10th day of the following month.
9.2 IMP shall be given the accounting report in both U.S. Dollars and in
Renminbi.
9.3 The accounting report should show budget variances. The general
manager should explain major variances from budget.
For Party A (Minghua) For Party B (IMP)
/s/ (sd ---) /s/ (sd ---)
(Signature) (Signature)
Attachment 6 Trade Mark License Agreement
According to the Memorandum of Understanding Relating to Joint Venture
between IMP Inc and NingBo Minghua Microelectronic Co Ltd of China, through the
consultations about the industrial property and the payment arrangement of
compensation. both parties agree with the following:
The joint venture of IMP and Minghua shall have the rights to use the IMP
trade mark. The products made by the joint venture can mark IMP trade mark.
IMP and the joint venture shall sign a seperate agreement on the terms and
conditions of the sales and marketing of IMP standard products and the IMP trade
mark.
For Party A (Minghua) For Party B (IMP)
/s/ (sd ---) /s/ (sd ---)
(Signature) (Signature)
Attachment 7 Idustrial Proporty
A. IMP's Process Technology
IMP shall provide with the 34 kinds of processing technology which had
been developed before 1999 and recorded on the disc of IMP:
1. Process C0809-5 Volt Analog
2. Process C0810 - High Resistance Poly for Analog
3. Process C1004-5 Volt Digital
4. Process C1012-5 Volt Digital
5. Process C1015 - Analog Mixed Mode
6. Process C1026 - Schottky Diode and Low TC P-Poly Resistor
7. Process C1027 - Low TC-P-Poly Resistor
8. Process C1028 - Low TC-P-Poly Resistor
9. Process C1029 - Schottky Diode and High-Resistance P-Poly Resistor
10. Process C1201 - Digital Double Metal
11. Process Cl202 - Analog Mixed Mode
12. Process C1203 - 2.0GHz
13. Process C1206 - 6.4GHz
14. Process C1209 - EECMOS
15. Process C1210 - Zero Threshold Devices
16. Process C1212 - 12 Volt Bipolar Operation
17. Process C1215 - Low Threshold Devices
18. Process C1216 - 15 Volt Operation
19. Process C1219 - EEPROM
20. Process C1221 - High-Resistance Poly for Analog
21. Process C1225 - BiCMOS
22. Process C1226 - 100V CMOS, Double Metal-Double Poly
23. Process C1227 - 30V Double Metal-Double Poly
24. Process C1229 - 30V Double Metal-Double Poly
25. Process C1230 - Low TCR P-Poly for Analog
26. Process C1231 - 30V Double Metal-Double Poly
27. Process C1232 - EEPROM with Lateral PNP
28. Process C1601 - Analog Mixed Mode
29. Process C3013 - 10 Volt Single Metal Analog
30. Process C3014 - 5 Volt Single Metal Analog
31. Process C3015 - Digital
32. Process C3017 - 10 Volt Analog Mixed Mode
33. Process C3025 - 10 Volt Analog
34. Process C5014 - 5 Volt Analog
IMP shall provide with the new developed processing technology, including
high voltage (100-1000 V) CMOS Processing technology, developed from 1999-2002.
The processing technology provided by IMP shall include the following
catergories. (1.5V 700V analog and mixed signal IC processing technology, more
than 40 typies.)
1. Super low power CCMOS, BiCMOS technology(l.5V - 3.0V)
This technology is suitable to develop super low power circuit for battery or
backup, such as PDA, Wireless phone MP3 player battery circuit for mobile phone,
cell phone, palm computer.
The typical technology include.
Lot traveler, process flow & specifications, elect para design rules & training.
2. Standrad analog and mixed signal IC processing technology (3V-18V CMOS,
BiCMOS, Bipolar).
This technology is suitable to develop standard analog and mixed signal IC, such
as PWM circuit, DC.DC conyerter. Power management and regulater circuits.
The typical technology include.
Lot traveler, process flow & specifications, elect para design rules & training.
3. High voltage compatible analog and mixed signal IC processing technology
(3V -500V CMOS, BiCMOS, BCD).
This technology is suitable to develop electric power devices, power management
and motor drivier Ics.
The typical technology include:
Lot traveler, process flow & specifications, elect para design rules & training.
4. Super high voltage high current CMOS. BiCMOS. BCD. DMOS technology.
This technology is suitable to develop new electric power devices, motor drivier
circuit, conven frequency circuit for home appliances, display drive circuit.
The typical technology include,
Lot traveler, process flow & specifications, elect para design rules & training.
5. EEPROM, EPROM processing technology
This technology is suitable to develop varies circuits of IC cards.
The typical technology include,
Lot traveler, process flow & specifications, elect para design rules & training.
More detailed technical data than those on the dice of IMP shall he provided as
well by IMP, including,
(1) Main steps of the manufacturing process flow
The detailed processing steps, the processing and monitoring requirement for
each step shall be included. The format of a ample is shown in Appendix 1 A
Sample of Processing Flow.
(2) Detailed layout design rules
The detailed layout design rules for each process technology shall he provided,
such as max and min width, max or min space, etc, and with the drawings. The
format of a sample is shown in Appendix 2. A Sample of Layout Design Rules.
(3) Technical description for the layout of each layer
For example, there are 20 masks for Process C1026- Schomky Xxxxx and Low TC
P-Poly Resister.
The detailed function of each layer of the layout shall he explained.
(4) Technical description for the layout cell library
The detailed technology file of layout design and circuit design, and layout
data base library as well as base cell unit layout library, shall be provided. A
sample is shown in Appendix 3 A Sample of single poly EEPROM storage cell layout
and circuit design.
(5) The cross-section view of the technology process
A sample is shown in Appendix; 4A Sample of the Cross-Section View of the
Technology Process.
(6) PCM (Process Control Monitor)
The PCM, layout and circuit for the test device for each process technology
shall be provided. The test technique includes: PCM test system; PCM software
operation system; the application software for PCM test; circuit and layout
design of test device; the device parameter testing method and operation; the
test analyzing of the device parameter.
B. IMP's Products
IMP's process technology can enable the joint venture to produce the following
products:
1. Main products of IMP
The present products of IMP are mainly in two categories: Power Management
circuits and Data Communication circuits. The PM circuits mainly includes five
kinds of circuits: PWM control circuit; Low drop regulator; MPU monitor circuit;
General series bus power management circuit; Field effect LED drive circuit,
etc. The DC circuits mainly includes three kinds of circuits: General
asynchronous receive and transmit circuit; Single SCSI interface circuit;
Multi-model LVD SCSI interface circuit, etc.
1.1 Power Management
1.1.1 PWM Controllers
Key Features
o 384x Series Pinout with BiCMOS Technology
o Zero Cross-Conduction Current by Design
o 65ns Maximum Current-Sense Delay
o 120uA Maximum Start-Up Current
o 1.5uA Maximum Operating Current
o High Output Current Drive
- -1 A, IMP38HC4x
- -0.5 A, IMP38C4x
o 20V Maximum Supply Voltage
o Trimmed Oscillator Discharge Current
--------------------------------------------------------------------------------
Part Number Start Up Minimum Maximum Duty Peak Output Drive
Voltage Operating Cycle
Voltage
--------------------------------------------------------------------------------
IMP38C42 14.5V 9.0V 96% 0.5A
--------------------------------------------------------------------------------
IMP38C43 8.4V 7.6V 96% 0.5A
--------------------------------------------------------------------------------
IMP38C44 14.5V 9.0V 50% 0.5A
--------------------------------------------------------------------------------
IMP38C45 8.4V 7.6V 50% 0.5A
--------------------------------------------------------------------------------
IMP38HC42 14.5V 9.0V 96% 1.0A
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
IMP38HC43 8.4V 7.6V 96% 1.0A
--------------------------------------------------------------------------------
XXX00XX00 14.5V 9.0V 50% 1.0A
--------------------------------------------------------------------------------
IMP38HC45 8.4V 7.6V 50% 1.0A
--------------------------------------------------------------------------------
Pin-for-Pin Enhanced Replacements for Micrel MIC38C/HC4x and GMT38C4x/HC4x
--------------------------------------------------------------------------------
1.1.2 Low Dropout Voltage Regulators
1. IMP37 LDO
Key Features
o Low Dropout Voltage
o 0.8V maximum at l00mA
o 0.95V maximum at 800mA
o Reduced Quiescent Current: 75uA Maximum
o 20% lower dropout voltage than "1117" LDO regulators
o l% Trimmed 2.5V, 3.0V and 3.3V Outputs
o Up to 5.5V input voltage
o "1117" Pin Compatible
o Guaranteed Low Dropout Voltage at Multiple Current Levels
o High-efficiency linear power supplies
o Post regulator for switching supplies
o 5V to 3.3V linear regulators
2. IMP2xxx LDOS
--------------------------------------------------------------------------------------------------
IMP Base Output Minimum Shutdown Pin Adjust Error Reference Telcom
Part Voltage Output Pin Flag Bypass Pin Equivalent
Number Current Output
(mA)
--------------------------------------------------------------------------------------------------
IMP2014 Fixed 60 X X TC1014
Options(7)
--------------------------------------------------------------------------------------------------
IMP2015 Fixed 110 X X TC1015
Options(7)
--------------------------------------------------------------------------------------------------
IMP2054 Fixed 60 X X TC1054
Options(7)
--------------------------------------------------------------------------------------------------
IMP2055 Fixed 110 X X TC1055
Options(7)
--------------------------------------------------------------------------------------------------
IMP2070 Adjustable 60 X X TC1070
--------------------------------------------------------------------------------------------------
IMP2071 Adjustable 110 X X TC1071
--------------------------------------------------------------------------------------------------
IMP2185 Fixed 160 X X TC1185
Options(7)
--------------------------------------------------------------------------------------------------
IMP2186 Fixed 160 X X TC1186
Options(7)
--------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------
IMP2187 Adjustable 160 X TC1187
--------------------------------------------------------------------------------------------------
Notes: 1. Fixed Output Voltage Options are: 2.5V, 2.7V, 2.85V, 3.0V,
3.3V, 3.6V, and 4.0V.
2. IMP2070, IMP2071 and IMP2187 have adjustable outputs.
--------------------------------------------------------------------------------------------------
1.1.3 Microprocessor Supervisors
1. IMP1232LP
o 5V Low Power Supervisor
o User selectable threshold tolerance via TOL pin
o 5% for 4.74V max. threshold and 10% for 4.49V
o Selectable watchdog timer period via TD pin: 150ms/610ms/1.2sec
o 40% lower power supply current than Dallas
o 30m A maximum (IMP) vs 50m A for Dallas
2. IMP1832
o 3.0/.3V Low Power Supervisor
o User selectable threshold tolerance via TOL pin
o 10% for 2.97V max. threshold and 20% for 2.64V max threshold
o Selectable watchdog timer period via TD pin: 150ms/610ms/1.2sec
o 40% lower power supply current than Dallas
o 20m A maximum (IMP) vs 35m A for Dallas
3. IMP161, IMP162
o Edge triggered manual reset input
o Low supply current extends battery life Low supply current makes the
IMP161/162 ideal for use in battery operated equipment.
o Single pulse output CMOS/TTL logic or switch interface
o With 3V supplies power consumption is 8m W typically and 30m W
maximum
4. IMP1810/1811/1812/1815/1816/1817/1834/1834A/1834D
--------------------------------------------------------------------------------
IMP Part Output Stage RESET Polarity System Supply
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
IMP1810 Push-Pull LOW 5V
--------------------------------------------------------------------------------
IMP1811 Open-Drain LOW 5V
--------------------------------------------------------------------------------
IMP1812 Push-Pull HIGH 5V
--------------------------------------------------------------------------------
IMP1815 Push-Pull LOW 3/3.3V
--------------------------------------------------------------------------------
IMP1816 Open-Drain LOW 3/3.3V
--------------------------------------------------------------------------------
IMP1817 Push-Pull HIGH 3/3.3V
--------------------------------------------------------------------------------
IMP1834 Push-Pull LOW 3.3/5V
--------------------------------------------------------------------------------
IMP1834A Open-Drain LOW 3.3/5V
--------------------------------------------------------------------------------
IMP1834D Push-Pull HIGH 3.3/5V
--------------------------------------------------------------------------------
5. IMP1233D and 1233M
--------------------------------------------------------------------------------
IMP Part Reset Threshold Maximum Supply Package
Current
--------------------------------------------------------------------------------
IMP1233MS-55 4.625V 20 microamperes 8-pin, SO
--------------------------------------------------------------------------------
IMP1233MS-5 4.375V 20 microamperes 8-pin, SO
--------------------------------------------------------------------------------
IMP1233MS-3 2.720V 20 microamperes 8-pin, SO
--------------------------------------------------------------------------------
IMP1233DZ-5 4.625V 20 microamperes 4-pin, SOT-223
--------------------------------------------------------------------------------
IMP1233DZ-15 4.125V 20 microamperes 4-pin, SOT-223
--------------------------------------------------------------------------------
IMP1233DZ-10 4.375V 20 microamperes 4-pin, SOT-223
--------------------------------------------------------------------------------
6. IMP690A, IMP692A, IMP802L/M, and IMP805L
--------------------------------------------------------------------------------
IMP Part No RESET Threshold Power Fail Watchdog
Polarity Voltage Threshold Function
Accuracy
--------------------------------------------------------------------------------
IMP690A LOW 4.65V 4% YES
--------------------------------------------------------------------------------
IMP692A LOW 4.40V 4% YES
--------------------------------------------------------------------------------
IMP802L LOW 4.65V 2% YES
--------------------------------------------------------------------------------
IMP802M LOW 4.40V 2% YES
--------------------------------------------------------------------------------
IMP805L HIGH 4 40V 4% YES
--------------------------------------------------------------------------------
7. IMP706P/R/S/T/J, IMP708P/R/S/T/J, IMP705, IMP706, IMP707, IMP708, and IMP813L
--------------------------------------------------------------------------------
IMP Part No RESET Manual Watchdog Threshold Voltage
RESET Timer
--------------------------------------------------------------------------------
IMP706P LOW YES YES 2.63V
--------------------------------------------------------------------------------
IMP706R/S/T/J HIGH YES YES 2.63V/2.93V/3.08V/ 4.0V
--------------------------------------------------------------------------------
IMP708R/S/T/J LOW and YES NO 2.63V/2.93V/3.08V/ 4.0V
HIGH
--------------------------------------------------------------------------------
IMP705 LOW YES YES 4.65V
--------------------------------------------------------------------------------
IMP706 LOW YES YES 4.40V
--------------------------------------------------------------------------------
IMP707 LOW and YES NO 4.65V
HIGH
--------------------------------------------------------------------------------
IMP708 LOW and YES NO 4.40V
HIGH
--------------------------------------------------------------------------------
IMP813 HIGH YES YES 4.65V
--------------------------------------------------------------------------------
8. IMP809, IMP810, IMP811, IMP812
o Low Power, Low Cost Microprocessor Supervisors
o 75% Lower Power Supply Current than Maxim
--------------------------------------------------------------------------------
IMP809 IMP810 IMP811 IMP812
--------------------------------------------------------------------------------
Package Pins 3 3 4 4
--------------------------------------------------------------------------------
Package Type SOT-23 SOT-23 SOT-143 SOT-143
--------------------------------------------------------------------------------
Manual Reset o o
--------------------------------------------------------------------------------
Active HIGH RESET Output o o
--------------------------------------------------------------------------------
Active LOW RESET Output o o
--------------------------------------------------------------------------------
1.1.4 Universal Serial Bus
Power Management Products
-------------------------------------------------------------------------------------------------------------------
IMP Part Number Package Operating Temperature # of Output Resistance Enable
Range Switches (milli-ohms) Logic
-------------------------------------------------------------------------------------------------------------------
IMP2524-1BWM 16-SO -40[degrees]C to +85[degrees]C 4 140.0 HIGH
-------------------------------------------------------------------------------------------------------------------
IMP2524-2BWM 16-SO -40[degrees]C to +85[degrees]C 4 140.0 LOW
-------------------------------------------------------------------------------------------------------------------
IMP2524-1BN 16-DIP -40[degrees]C to +85[degrees]C 4 140.0 HIGH
-------------------------------------------------------------------------------------------------------------------
IMP2524-2BN 16-DIP -40[degrees]C to +85[degrees]C 4 140.0 LOW
-------------------------------------------------------------------------------------------------------------------
IMP2525-1BM 8-SO -40[degrees]C to +85[degrees]C 1 140.0 HIGH
-------------------------------------------------------------------------------------------------------------------
IMP2525-2BM 8-SO -40[degrees]C to +85[degrees]C 1 140.0 LOW
-------------------------------------------------------------------------------------------------------------------
IMP2525-1BN 8-DIP -40[degrees]C to +85[degrees]C 1 140.0 HIGH
-------------------------------------------------------------------------------------------------------------------
IMP2525-2BN 8-DIP -40[degrees]C to +85[degrees]C 1 140.0 LOW
-------------------------------------------------------------------------------------------------------------------
IMP2525A-1BM 8-SO -40[degrees]C to +85[degrees]C 1 70.0 HIGH
-------------------------------------------------------------------------------------------------------------------
IMP2525A-2BM 8-SO -40[degrees]C to +85[degrees]C 1 70.0 LOW
-------------------------------------------------------------------------------------------------------------------
IMP2525A-1BN 8-DIP -40[degrees]C to +85[degrees]C 1 70.0 HIGH
-------------------------------------------------------------------------------------------------------------------
IMP2525A-2BN 8-DIP -40[degrees]C to +85[degrees]C 1 70.0 LOW
-------------------------------------------------------------------------------------------------------------------
IMP2526-1BM 8-SO -40[degrees]C to +85[degrees]C 2 140.0 HIGH
-------------------------------------------------------------------------------------------------------------------
IMP2526-2DM 8-SO -40[degrees]C to +85[degrees]C 2 140.0 LOW
-------------------------------------------------------------------------------------------------------------------
IMP2526-1BN 8-DIP -40[degrees]C to +85[degrees]C 2 140.0 HIGH
-------------------------------------------------------------------------------------------------------------------
IMP2526-2BN 8-DIP -40[degrees]C to +85[degrees]C 2 140.0 LOW
-------------------------------------------------------------------------------------------------------------------
IMP2527-1BWM 16-SO -40[degrees]C to +85[degrees]C 4 300.0 HIGH
-------------------------------------------------------------------------------------------------------------------
IMP2527-2BWM 16-SO -40[degrees]C to +85[degrees]C 4 300.0 LOW
-------------------------------------------------------------------------------------------------------------------
IMP2527-1BN 16-DIP -40[degrees]C to +85[degrees]C 4 300.0 HIGH
-------------------------------------------------------------------------------------------------------------------
IMP2527-2BN 16-DIP -40[degrees]C to +85[degrees]C 4 300.0 LOW
-------------------------------------------------------------------------------------------------------------------
1.1.5 Electroluminescent Lamp Drivers
IMP offers a full line of Electroluminescent (EL) lamp driver integrated
circuits. The four EL lamp driving functions are integrated on chip. These are
the switch-mode power supply, its high-frequency oscillator, the high voltage
H-bridge lamp driver and its low-frequency oscillator.
-----------------------------------------------------------------------------------------------
IMP Part Packages Input Voltage Output Voltage Number of Drivers
Number Range (V) (Vpp)
-----------------------------------------------------------------------------------------------
IMP522 10-MicroSO 2.0 to 6.5V 220 2
-----------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------
IMP525 8-SO, 8-MicroSO, Die 0.9 to 2.5V 112 1
-----------------------------------------------------------------------------------------------
IMP527 8-SO, 8-MicroSO, Die 0.9 to 2.5V 180 1
-----------------------------------------------------------------------------------------------
IMP528 8-SO, 8-MicroSO, Die 2.0 to 6.5 220 1
-----------------------------------------------------------------------------------------------
IMP560 0.XX, 8-MicroSO, Die 2.0 to 6.5 120 1
-----------------------------------------------------------------------------------------------
IMP803 8-SO, 8-MicroSO, Die 2.0 to 6.5 180 1
-----------------------------------------------------------------------------------------------
1.1.6 PCM Digital Switch
IMP8980D PCM Digital Switch
Key Features
o ST-BUS compatible
o 8-line x 32-channel inputs
o 8-line x 32-channel outputs
o 256 ports non-blocking switch
o Single power supply (+5V)
o 3OmW power consumption
o Microprocessor-control interface
o Pin-compatible with Mitel MT8980
1.2 Data Communication
1.2.1 UART Products
----------------------------------------------------
Part Number Description
----------------------------------------------------
IMP16C450 UART
----------------------------------------------------
IMPI6C550 UART with FIFO
----------------------------------------------------
IMP16C552 Dual UART with Parallel Port
----------------------------------------------------
IMP16C554 Quad UART
----------------------------------------------------
IMP68C681 DUART: Phillilps Compatible
----------------------------------------------------
IMP88C681 DUART: Phillilps Compatible
----------------------------------------------------
IMP82C684 DUART: Phillilps Compatible
----------------------------------------------------
1.2.2 Single Ended SCSI Terminators
IMP5111/5112 9-line, Non-Linear SCSI
IMP5115 9-line, Non-Linear SCSI
IMP5121 27-line, Non-Linear SCSI
IMP5218 9-line, Non-Linear SCSI
IMP5219 9-line, Non-Linear SCSI
IMP5225 18-line, Non-Linear SCSI
IMP5226 18-line, Non-Linear SCSI
1.2.3 Multimode LVD SCSI Terminators
-------------------------------------------------------------
Part Number Packages Max. Output Cross
Capacitance Reference
-------------------------------------------------------------
IMP5241 36P-SSOP 3pF DS2118M
24P-TSSOP UCC5630
-------------------------------------------------------------
IMP5242 36P-SSOP 3pF
24P-TSSOP
-------------------------------------------------------------
All IMP multimode devices are Hot Swap capable
-------------------------------------------------------------
IMP shall provide with integrated technical information for the design and
manufacture of the products, including;
(1) Circuit schematic and logic diagram;
(2) Physical layout;
(3) Working masks;
(4) Testing method for the product;
(5) Package type and manufacture.
2 List of the standard products of IMP
Part of the standard products of IMP is listed as following;
IMP1232LP IMP1233DZ-15 IMP1810R-15 IMP1812R-15
IMP1232LPCMA IMP1233DZ-5 IMP1810R-5 IMP1812R-5
IMP1232LPEMA IMP1233M-3 IMP1811-10 IMP1815-10
IMP1232LPN IMP1233M-5 IMP1811-15 IMP1815-20
IMP1232LPS IMP1233M-55 IMP1811-5 IMP1815-5
IMP1232LPS-2 IMP1233MS-3 IMP1811R-10 IMP18l5R-10
IMP1232LPSN IMP1233MS-5 IMP1811R-15 IMP1815R-20
IMP1232LPSN-2 IMP1233MS-55 IMP1811R-5 IMP1815R-5
IMP1233D-10 IMP1810-10 IMP1812-10 IMP1816-10
IMP1233D-15 IMP1810-15 IMP1812-15 IMP1816-20
IMP1233D-5 IMP1810-5 IMP1812-5 IMP1816-5
IMP1233DZ-10 IMP1810R-10 IMP1812R-10 IMP1816R-10
IMP1816R-20 IMP38C44ESA IMP5241CPW IMP707CPA
IMP1816R-5 IMP38C44ESD IMP5242CDB IMP707CSA
IMP1817-10 IMP38C45EMA IMP5242CPW IMP707CUA
IMP1817-20 IMP38C45EPA IMP5245CPW IMP707EPA
IMP1817-5 IMP38C45EPD IMP5246CPW IMP707ESA
IMP1817R-10 IMP38C45ESA IMP525EMA IMP708CPA
IMP1817R-20 IMP38C45ESD IMP525ESA IMP708CSA
IMP1817R-5 IMP38HC42EMA IMP690ACPA IMP708CUA
IMP1832 IMP38HC42EPA IMP690ACSA IMP708EPA
IMP1832EMA IMP38HC42EPD IMP690AEPA IMP708ESA
IMP1832S IMP38HC42ESA IMP690AESA IMP708RCPA
IMP1834 IMP38HC42ESD IMP692ACPA IMP708RCSA
IMP1834A IMP38HC43EMA IMP692ACSA IMP708RCUA
IMP1834AEMA IMP38HC43EPA IMP692AEPA IMP708REPA
IMP1834AS IMP38HC43EPD IMP692AESA IMP708RESA
IMP1834D IMP38HC43ESA IMP705CPA IMP708SCPA
IMP1834DEMA IMP38HC43ESD IMP705CSA IMP708SCSA
IMP1834DS IMP38HC44EMA IMP705CUA IMP708SCUA
IMP1834EMA IMP38HC44EPA IMP705EPA IMP708SEPA
IMP1834S IMP38HC44EPD IMP705ESA IMP708SESA
IMP2525-1BM IMP38HC44ESA IMP706CPA IMP708TCPA
IMP2525-1BN IMP38HC44ESD IMP706CSA IMP708TCSA
IMP2525-2BM IMP38HC45EMA IMP706CUA IMP708TCUA
IMP2525-2BN IMP38HC45EPA IMP706EPA IMP708TEPA
IMP2525A-1BM IMP38HC45EPD IMP706ESA IMP708TESA
IMP2525A-1BN IMP38HC45ESA IMP706PCPA IMP802LCPA
IMP2525A-2BM IMP38HC45ESD IMP706PCSA IMP802LCSA
IMP2525A-2BN IMP5111CDP IMP706PCUA IMP802LEPA
IMP2526-1BM IMP5111CPWP IMP706PEPA IMP802LESA
IMP2526-1BN IMP5112CDP IMP706PESA IMP802MCPA
IMP2526-2BM IMP5112CPWP IMP706RCPA IMP802MCSA
IMP2526-2BN IMP5115CD IMP706RCSA IMP802MEPA
IMP38C42EMA IMP5115CDW IMP706RCUA IMP802MESA
IMP38C42EPA IMP5115CPWP IMP706REPA IMP803IMA
IMP38C42EPD IMP5121CDB IMP706RESA IMP803LG
IMP38C42ESA IMP5121CPW IMP706SCPA IMP805LCPA
IMP38C42ESD IMP5218CDW IMP706SCSA IMP805LCSA
IMP38C43EMA IMP5218CPW IMP706SCUA IMP805LEPA
IMP38C43EPA IMP5219CDW IMP706SEPA IMP805LESA
IMP38C43EPD IMP5219CPW IMP706SESA IMP809JEUR
IMP38C43ESA IMP5225CDB IMP706TCPA IMP809LEUR
IMP38C43ESD IMP5225CDWP IMP706TCSA IMP809MEUR
IMP38C44EMA IMP5226CDB IMP706TCUA IMP809REUR
IMP38C44EPA IMP5226CDWP IMP706TEPA IMP809SEUR
IMP38C44EPD IMP5241CDB IMP706TESA IMP809TEUR
IMP810JEUR IMP8l3LEPA IMP2054-3.0JUK/T IMP2185-4.0JUK/T
IMP810LEUR IMP813LESA IMP2054-3.3JUK/T IMP2185-5.0JUK/T
IMP810MEUR IMP2014-2.5JUK/T IMP2054-3.6JUK/T IMP2186-2.5JUK/T
IMP810REUR IMP2014-2.7JUK/T IMP2054-4.0JUK/T IMP2186-2.7JUK/T
IMP810SEUR IMP2014-2.85JUK/T IMP2054-5.0JUK/T IMP2186-2.85JUK/T
IMP810TEUR IMP2014-3.0JUK/T IMP2055-2.5JUK/T IMP2186-3.0JUK/T
IMP811JEUS IMP2014-3.3JUK/T IMP2055-2.7JUK/T IMP2186-3.3JUK/T
IMP811LEUS IMP2014-3.6JUK/T IMP2055-2.85JUK/T IMP2186-3.6JUK/T
IMP811MEUS IMP2014-4.0JUK/T IMP2055-3.0JUK/T IMP2186-4.0JUK/T
IMP811REUS IMP2014-5.0JUK/T IMP2055-3.3JUK/T IMP2186-5.0JUK/T
IMP811SEUS IMP2015-2.5JUK/T IMP2055-3.6JUK/T IMP2l87JUK/T
IMP811TEUS IMP2015-2.7JUK/T IMP2055-4.0JUK/T IMP37-25JST
IMP812JEUS IMP2015-2.85JUK/T IMP2055-5.0JUK/T IMP37-30JST
IMP812LEUS IMP2015-3.0JUK/T IMP2070JUK/T IMP37-33JST
IMP812MEUS IMP2015-3.3JUK/T IMP2071JUK/T IMP37-25JCM
IMP812REUS IMP2015-3.6JUK/T IMP2185-2.5JUK/T IMP37-30JCM
IMP812SEUS IMP2015-4.0JUK/T IMP2185-2.7JUK/T IMP37-33JCM
IMP812TEUS IMP2015-5.0JUK/T IMP2185-2.85JUK/T IMP8980DE
IMP813LCPA IMP2054-2.5JUK/T IMP2185-3.0JUK/T IMP8980DP
IMP813LCSA IMP2054-2.7JUK/T IMP2185-3.3JUK/T
IMP813LCUA IMP2054-2.85JUK/T IMP2185-3.6JUK/T
IMP shall provide with the relevent certificatation materials of the
industrial proporty transferred to the joint venture, including: the copy of
certificate for patents or trade mark etc.
Appendix 1 A Sample of Processing Flow
Appendix 2 A Sample of Layout Design Rule
For Party A (Minghua) For Party B (IMP)
/s/ (sd ---) /s/ (sd ---)
(Signature) (Signature)
The Regulation of IMP&MH Microelectronic
Limited Liability Company
Chapter 1 General provisions
Article 1
In accordance with the contract for the joint venture of IMP&MH
Microelectronic Co. Ltd (hereafter referred to as the joint venture), which was
concluded in the light of the law of the People's Republic of China on Joint
Venture Using Chinese and Foreign Investment and other relevant Chinese laws and
regulations through the investment of IMP Company (hereafter referred to as
Party B) and Minghua Microelectronic Investment Company (the original Minghua
Microelectronic Company, hereafter referred to as Party A) in Ningbo, Zhejiang,
on , 2002, this regulations of the joint venture is drawn up.
Article 2
The name of the joint venture is [Chinese translation not available]
The name in English is IMP&MH Microelectronic Co. Ltd.
The legal address of the joint venture is at:
[Chinese translation not available]
Article 3
The name and legal address of both parties are as follows:
Party A: Minghua Microelectronic Investment Co. Ltd; registered in Ningbo,
zhejiang.
Legal address: [Chinese translation not available]
Legal representative: Name: [Chinese translation not available]
Position: Chairman of the board
Nationality: Chinese
Party B: IMP Inc. registered in USA.
Legal address: 0000 Xxxxx xxxxx Xx., Xxx Xxxx, XX 00000
Legal representative: Name: Xxxxxxxx Xxxxxxxxxx
Position: Chairman of the board
Nationality: American
Any changes of aforementioned with one party shall be noticed to the joint
venture and to the other party. Otherwise, the joint venture and the other Party
shall not be responsible for the legal consequences arouse from the changes.
Article 4
The joint venture is a limited liability company.
Article 5
The joint venture is a legal person in China. All activities of the joint
venture shall be governed by the laws, decrees, pertinent rules and regulations
of the People's Republic of China.
Chapter 2 The Purpose, Scope of Business
Article 6
The goals of the parties of the joint venture are to enhance economic
co-operation and technical exchanges, to improve the product quality, develop
new products, and gain a competitive position in the world market in quality and
price by adopting advanced and appropriate technology and scientific management
methods, so as to raise economic results and ensure satisfactory economic
benefits for each investor.
Article 7
The business scope of the joint venture is to design, develop, produce and
sell Integrated Circuits, and products of electronic modules and software as
well.
Article 8
The production capacity of simeconductor electric power devices and
others, after the joint venture is put into operation, shall be 12,000 wafers
per month (5 inch wafer, l2mask process, 0.65 micron level).
The production scale may be increased up to 40,000 with the development of
the production and operation. The wafer varieties may be developed into 6 - 8
inch, 0.5 micron level.
Article 9
The products of the joint venture will be sold both on the Chinese and the
overseas market, the export portion accounts for 90%, and 10% for the domestic
market, for the first three years.
Chapter 3 Total Amount of Investment and the Registered Capital
Article 10
The total amount of investment of the joint venture is RMB 248.24 million
Yuan (including US$ 400 million).
The registered capital of the joint venture is RMB 152 million Yuan.
Article 11
Of the registered capital: Party A pay RMB 76 million Yuan, accounting for
50% of the registered capital;
Party B pay RMB 76 million Yuan, accounting for 50%.
Article 12
The registered capital of the joint venture shall be paid by Party A and
Party B respectively within the allotted time, in the form and quantities
according to the provisions of the contract of the joint venture.
Article 13
Within 15 days on any installment payment of the registered capital of the
joint venture, paid by
Party A or Party B, the joint venture shall invite the certified
accountant registered in China to check it and produce the report of the capital
checking. Within 30 days on receiving the report of the capital checking, the
joint venture shall produce the certificate of investment to the party and
report to the original examination and approval authority and the administration
department of business on file.
Article 14
Within the duration of the joint venture, the registered capital of the
joint venture shall not be decreased. Any adjustment of the registered capital
and the total amount of investment shall be reported to and approved by the
examination and approval authority.
Article 15
In case any party to the joint venture intends to assign all or part of
his investment subscribed to a third party, the party shall ask for the
agreement of the other party, and the other part has preemptive rights to buy
where the condition is the same.
Article 16
Any increase or transfer of the registered capital shall be unanimously
approved by the board and reported to the original examination and approval
authorities for approval, and shall be handled and registered at the
administration department of business.
Article 17
The shortage between the total investment and registered capital of the
joint venture, and the working capital dollar required by the joint venture
shall be lent from banks in China or overseas.
Without the advanced agreement with the other party, any party shall not
raise a mortgage or other creditor's rights on all or part of his investment.
Chapter 4 The board of Directors
Article 18
The date of registration of the joint venture shall be the date of the
establishment of the board of directors of the joint venture. The highest
authority of the joint venture shall be its board of directors.
Article 19
The board of directors is composed of 9 directors, of which 5 shall be
appointed by Party A, 4 by Party B. the chairman shall be appointed by Party A,
and the vice president (one person) by Party B. The term of office for the
directors, chairman and vice-chairman is three years, their term of office may
be renewed if continuously appointed by the relevant party.
About the appointment or the dismissal of the director, one party shall
notice the other party in writings and report the administration department of
business on file.
Article 20
The board of the joint venture shall decide all major issues concerning
the joint venture,
including:
1) Amendment of the regulation of the joint venture;
2) Separating of the joint venture or merging with the other economic
units;
3) Termination of the joint venture;
4) Increase of the registered capital and the total amount of
investment or the transfer of the investment;
5) The investment by the joint venture to other economic units;
6) Setting up of branches or affiliated units of the joint venture;
7) Proposal of annual profit disposal of the joint venture after
taxing;
8) Allocations for reserve funds, expansion funds of the joint venture
and welfare founds for staff and workers;
9) Major financial expenditure;
10) Annual and long term plan on production, sales and such development
plans, etc, of the joint venture;
11) Any loan or guarantor provided by the joint venture;
12) The setting of the basic configuration of the joint venture,
including the positions of management staff;
13) Internal regulations of the joint venture;
14) Appointment, dismissal and rewards for high-ranking management
personnel;
15) Engaging of certified accountant, auditor or lawyer, etc.;
16) Lawsuits or arbitration arising from the joint venture;
17) Sale of the fixed assets of the joint venture;
18) Other issues for the approval of its directors judged by the board,
Unanimous approval shall be required for the following:
1) Amendment of the regulation of the joint venture;
2) Termination of the joint venture;
3) Adjustment of the registered capital of the joint venture;
4) Separations of the joint venture or merging with the other economic
unities;
5) Transfer of the stock ownership of the joint venture by one party or more
parties;
6) Mortgage of the stock ownership of the joint venture by one party or more
parties;
7) Mortgage of the assets of the joint venture;
8) Issues judged by the board for the unanimous approval of its directors.
As for other matters, approval by majority or a simple majority shall be
required.
Article 21
The chairman of the board is the legal representative of the joint
venture. Should the chairman be unable to exercise his responsibilities for any
reason, he shall authorize the vice-chairman or any other directors to represent
the joint venture temporarily. In case the chairman fails to exercise his
responsibilities and to authorize other person explicitly, the vice-chairmen
shall exercise the chairman's responsibilities.
Article 22
The board of directors shall convene at least one meeting every year. The
meeting shall be called and presided over by the chairman of the board. The
chairman may convene an interim meeting based on a proposal made by more than on
third of the total member of directors. Minutes of the meetings shall be placed
on file.
The notice about convening the meeting of the board shall include the
meeting's date, place and agenda, etc., and shall be distributed to all the
directors in writings 30 days before the convening of the meeting.
Article 23
More than two third of the number of directors of the board present at the
meeting (including the interim meeting) shall be required. Each director has one
ballot for voting.
Article 24
All parties shall be voluntary to ensure the directors entrusted by them
respectively present at the meeting of the board. Should the director be unable
at the meeting, he shall entrust other person at meeting with the commission
notice.
Article 25
Should the directors entrusted by one party or parties be unable at the
meeting of the board and fail to entrust other person, therefore the board
should not make the resolutions to the major matters concerning the joint
venture according to the law and regulations, and to the contract and this
regulation of the joint venture, within 30 days, the other party may notice the
party or parties unable at the meeting and not entrusting other person at
meeting to urge them to be present at the meeting on the specified date at their
legal address.
Article 26
Aforementioned urging notice shall be delivered in double-registered
letter and 60 days before the date of convening the meeting specified, and shall
give indication that the party noticed should reply whether or not to be present
at the meeting of the board within 45 days of the notice being delivered. Should
the party noticed be unable reply to the noticing party within 45 days after the
notice being delivered, or should the noticed party reply not to be present at
the meeting, the noticed party shall be deemed to abstain from voting. On
receiving the receipt of the double-registered letter, the director entrusted by
the noticing party and other directors may
convene the special meeting of the board and then make effective resolution to
the major matters concerning the joint venture with the unanimous approval of
the directors presented at the meeting, even if the number of directors is less
than legal number.
As for the matters requiring the resolution of the board before action,
the chairman of the board may ask for the opinion of all the directors in
writings. With the approval of more than legal number of directors in writings,
the resolution of the matter shall be deemed as the resolution of the
conventional meeting.
Article 27
The director of the board who has no management position in the joint
venture shall not be paid by the joint venture. All the relevant expenses to
hold the meeting of the board shall be xxxxx by the joint venture.
Chapter 5 Business management Office
Article 28
The joint venture shall establish a management office which shall be
responsible for its daily management. The management office shall have a general
manager, recommended by Party B; 4 deputy general managers recommended by Party
A. The general manager and deputy general managers, whose terms of office is 3
years, shall be appointed by the board of directors. The general manager shall
be appointed from the non-chairman party. The term of office of the general and
deputy general managers may be renewed if continuously appointed by the board.
Article 29
The responsibility of the general manager is to carry out the decisions of
the board, to organize and conduct the daily management of the joint venture.
The deputy general managers shall assist the general manager in his work, and
exercise the necessary daily management of the general manager for the normal
business operation at the absence of the general manager. Co-decision by the
general and deputy general managers on the major matters shall be required. The
scope of the general and deputy general managers' function shall be discussed
and decided by the board.
Several department managers may be appointed by the management office,
they shall be responsible for the work in various departments respectively,
handle the matters handed over by the general manager and deputy general
managers and shall be responsible to them.
Article 30
The general manager, deputy general manager and other department manager
shall perform his duty seriously and shall not hold a manager position or not be
an employee of other companies concurrently.
In case of graft or serious dereliction of duty on the part of general
manager and deputy managers, the board of directors shall dismiss them through
the resolution of the meeting of the
board at any time.
Article 31
The setting of departments of the joint venture and their structures shall
be planned by the general manager and deputy manager and decided by the board.
The setting of other units and other positions of non-management personnel shall
be decided by the general manager and deputy managers.
Article 32
In case of graft or serious dereliction of duty on the part of
high-ranking management personnel, the board of directors shall have the power
to dismiss them at any time.
Chapter 6 Finance and Accounting
Article 33
In accordance with Chinese laws and regulations and the rules of finance
administration, the joint venture shall establish the system of finance and
accounting, to carry out the financial management of the joint venture under the
responsibility of the general manager.
Article 34
The fiscal year of the joint venture shall be the same as the Gregorian
calendar. The first fiscal year shall be from the date of registration of the
joint venture to December 31st of that year. IMP will prefer the fiscal year to
match with IMP fiscal year which is April 1st to March 31st.
Article 35
All vouchers, receipts, statistic statement and reports shall be written
in Chinese, if written in English, additional explanation in Chinese shall be
required.
Article 36
RMB shall be the basic monetary adopted by the joint venture for
accounting. The converting of RMB to other foreign monetary shall be in
accordance with the mid exchange rate published by the State Administration of
Foreign Exchange in due time.
Article 37
The joint venture shall open a foreign exchange account with the Bank of
China or with other banks approved to do the foreign exchange business by the
People's Bank of China.
Article 38
The joint venture shall adopt the system of duties and rights, and
accounting of loan with current international standard.
Article 39
In the first three months of each fiscal year, the manager shall prepare
the previous year's balance sheet, profit and loss statement and proposal
regarding the disposal of profits, and submit them to the board of directors for
examination.
Article 40
On promising to keep the business secrets in advance, any party of the
joint venture may employ an auditor at its own expenses to undertake the
accounting checking and examination. The joint venture shall give its consent
for that.
Article 41
In accordance with Rules for the Implementation of the Income Tax Law of
the People's Republic of China to Foreign Enterprise and Enterprise Using
Foreign Investment, the board of the joint venture shall decide the number of
years set for the depreciation of fixed assets of the joint venture.
Article 42
The joint venture shall handle the matter of foreign exchange according to
the relevant rules of China about the foreign exchange management, and keep the
balance of the foreign exchange of the joint venture.
Chapter 7 Disposal of Profits
Article 43
Allocations for reserve funds, expansion funds of the joint venture and
welfare funds and bonus for staff and workers shall be set aside from the
profits after payment of income tax. If the proportion of allocations of reserve
funds is no less than 15% of the profits after payment of income tax, the
decision by the board of the joint venture shall be required.
Article 44
Within 4 months after the end of previous fiscal year, the board of the
joint venture shall decide the profit dividends after payment of various taxes
and allocation of various funds according to the actual conditions of the joint
venture. The share dividends shall be distributed with the proportion of
registered capital actually invested by each party.
Without making up the loss of previous fiscal years, the joint venture
shall not draw dividends. The un-allotted profits of previous years may be
distributed with the profits of this fiscal year.
Article 45
Insurance policies of the joint venture on various kinds of risks shall be
taken out with insurance companies in China. The types, value and duration of
insurance shall be decided by the board of director in accordance with the
provisions of the insurance company.
Article 46
The joint venture shall supervise its domestic and foreign staff to pay
individual income tax according to the Individual Income Tax Law of the People's
Republic of China.
Article 47
The lawful profits of investor earned from the joint venture, the other
legal income and the capital after liquidation may be remitted abroad.
The wages and other proper income of the foreign staff of the joint
venture may be remitted
abroad after the payment of individual income tax.
The profits of foreign investor and the wages of foreign staff of the
joint venture shall be paid with RMB. The joint venture shall provide help to
convert them into foreign exchange.
Chapter 8 Staff and Workers
Article 48
The matters covering the recruitment, employment, dismissal and
resignation, wages, labor insurance, welfare, rewards, labor discipline and
labor protection, etc., concerning the staff and workers of the joint venture
shall be handled in accordance with the Regulations of the People's Republic of
China on Labor Management in Joint Ventures Using Chinese and Foreign Investment
and its Implementing Rules.
The joint venture shall not employ child labors.
Article 49
The staff and workers required by the joint venture shall be publicly
engaged in the condition that they are recommended by, or agreed with local
labor management department, and employed on the basis of competitive selection
through examination test. The labor contract between the personnel enrolled and
the joint venture shall be signed according to the laws, and be on filed with
the local labor management department.
Article 50
The joint venture shall have the rights to give penalties to those staff,
who violate the regulation of the joint venture or the discipline of labor, such
as warning, offence recording and wage reducing, and resignation to those with
serious offence. The resignation of staff of the joint venture shall be on filed
with the local management department.
Article 51
The wages and other rewards of staff of the joint venture shall be
specified in the labor contract in accordance with relevant Chinese rules and
the actual condition of the joint venture, and shall be decided by the board of
directors. With the development of the business of the joint venture, with the
improvement of the staff's business capabilities and technical level, the wages
of staff shall be increased properly.
Chapter 9 Labor Union
Article 52
The staff and workers of the joint venture shall have the rights to set up
a basic unit of labor union and to take activities in accordance with the law of
the People's Republic of China on Trade Union.
Article 53
The labor union of the joint venture shall represent the benefits of the
staff and workers. The task of the labor union is:
Protecting the rights and benefits of the staff in accordance with the
law;
Assisting the joint venture to arrange welfare funds and rewards properly;
Organizing the staff of learning politics, science and technology and
business;
Developing activities on arts and sports;
Instructing the staff and workers on observing the labor discipline, and
on fulfilling the various tasks of the joint venture with best efforts.
Article 54
The labor union of the joint venture, representing the staff and workers
as a whole, may sign a contract with the joint venture, and supervise the
implementation of this contract.
Article 55
The representative of the labor union shall have the rights to attend the
meeting of the joint venture as an observer when the meeting is conceming the
staff and workers about their awards and penalties, wages, welfare, labor
protection and labor insurance. The joint venture shall heed the opinion of the
labor union and co-operate with the labor union.
Article 56
The joint venture shall provide the labor union with necessary rooms and
equipment, according to the provisions of the Law of the People's Republic of
China on Trade Union, used for offices meetings and the activities about the
staff's collective welfare, culture and sports.
Article 57
The joint venture shall transfer 2% of the total wages of the staff and
workers as the funds of the labor union. The labor union of the joint venture
shall use the funds in accordance with the relevant management rules of the
funds of labor union specialized by the All-China Federation of Trade Unions.
Chapter 10 Duration Termination and Liquidation
Article 58
The duration of the joint venture shall be for 10 years. The establishment
date of the joint venture shall be the date on which the business license of the
joint venture is issued.
Article 59
An application for the extension oft the duration, proposed by one party
and unanimously approved by the board of directors, shall be submitted to the
original examination and approval authority in writings six months prior to the
expiry date of the joint venture.
Article 60
The contract of the joint venture and the joint venture itself may be
terminated and disbanded before the date of expiration of the joint venture for
the reasons as follows:
(1) Either of the parties to the contract be prevented from executing the
contract of the joint venture by force majeure;
(2) In case of inability to fulfill the contract or to continue operation due
to heavy losses in successive years;
(3) The contract of the joint venture be unnecessary to continue in operation
due to the fact the one of the contracting parties substantially violates
the provisions of the contract and articles of association;
(4) Both parties deem that the business goal of the joint venture have not
been reached and there are no prospects on the development of business;
(5) Other reasons on the termination of the contract specialized by the
contract the regulation of the joint venture and the relevant laws and
regulations;
The written application for the disbandment of the joint venture shall be
raised by the board of directors and approved by the examination and approval
authority.
Should the directors of one party or more parties do not attend at or do
not convene the meeting of the board for more than two years so that the board
of directors can not make the effective resolution of terminating the joint
venture, should those directors do not reply the no less than 3 notices
delivered by other investors, the other investors may apply for the disbandment
of the joint venture to the original examination and approval authority under
the witness of Chinese notarization office or the lawyer.
Article 61
Upon the termination of the joint venture, liquidation shall be carried
out. The commission of liquidation shall consist of at least 3 persons who are
selected from the directors by the board or engaged from relevant specializing
persons.
Should the joint venture be unable to organize the commission of
liquidation by himself, the board of directors or the investors and creditors
may apply for a special liquidation with the original examination and approval
authority.
During the period of liquidation, the joint venture shall not open new
business.
Article 62
The joint venture shall be liquidated by the commission of liquidation in
accordance with the Implement of Liquidation of Enterprises Using Foreign
Investment.
The property of the joint venture shall be assessed by the accountant
registered in China and invited by the commission of liquidation.
In the liquidation, each investor of the joint venture shall first take
back his contributing investment respectively, the new property produced by
parties together shall be allotted in proportion to the investment.
For the property of the joint venture, the investing party shall have the
pre-emptive rights to purchase them.
Article 63
After finishing the liquidation, the joint venture shall conduct the
registration nullifying with the business and administration management
department, and cancel the license of the joint venture.
Chapter 11 Regulation and Institution
Article 64
Through the board of directors, the joint venture shall draft regulations
and institutions as follows:
(1) Business management system, including the terms of reference and the
working procedures of the various management departments;
(2) Regulation of staff and workers;
(3) Labor and wage system;
(4) The system of attendance promotion and rewards & penalties for staff
and workers;
(5) Staff welfare institution;
(6) The finance system;
(7) The procedure of liquidation when the joint venture is disbanded;
(8) Other necessary rules.
Chapter 12 Appendices
Article 65
This regulation shall be written in Chinese and in English. Both language
versions are equally authentic. In the event of any discrepancy between the two
afore mentioned versions, the Chinese version shall prevail.
This regulation shall be in four copies, one for each party respectively,
one for the examination and approval authority, and one for the business
administration management department.
Article 66
Other matters not specialized in this regulation shall be handled
according to the provisions of the contract of the joint venture, to the
resolution by the board of directors and to the provisions of relevant laws and
regulations in China. In the event of any discrepancy between the contract of
the joint venture and this regulation, the contract shall prevail.
Article 67
This regulation shall come in force upon the approval of the foreign trade
and economic cooperation commission. The amendment of this regulation shall be
approved by the same commission.
Article 68
This regulation is signed in Ningbo, Zhejiang of China, by the authorized
representatives of
both parties on
Party A: Party B:
Ningbo Minghua IMP Inc.
Microelectronic Investment
Co. Ltd.
/s/ (sd ---) /s/ (sd ---)
Legal representative: Legal representative:
Authorized representative: Authorized representative:
