[NOKIA LOGO]
Exhibit 10.28
DEVELOPMENT AGREEMENT
ESINS03T733
BETWEEN
NOKIA CORPORATION
NOKIA NETWORKS
AND
ENDWAVE CORPORATION
ON THE DEVELOPMENT OF
[*] AND [*] GHZ MICROWAVE UNITS (MWUS)
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO]
TABLE OF CONTENTS
1 DEFINITIONS ......................................... 1
2 DEVELOPMENT.......................................... 4
3 RESOURCES............................................ 5
4 SPECIFICATIONS....................................... 6
5 CHANGES.............................................. 7
6 QUALITY REQUIREMENTS................................. 8
7 DELIVERY, TESTING AND ACCEPTANCE..................... 8
8 DELAYS............................................... 9
9 PRICING.............................................. 10
10 INTELLECTUAL PROPERTY RIGHTS AND INDEMNIFICATION..... 11
11 MANUFACTURING RIGHTS AND INFORMATION................. 14
12 WARRANTIES........................................... 16
13 PURCHASE AGREEMENT................................... 18
14 ENVIRONMENTAL AND ETHICAL ISSUES..................... 19
15 LIABILITY............................................ 20
16 FORCE MAIEURE........................................ 20
17 CONFIDENTIALITY...................................... 21
18 TERM AND TERMINATION................................. 22
19 MISCELLANEOUS........................................ 23
20 APPLICABLE LAW AND DISPUTES.......................... 24
APPENDICES
APPENDIX 1 Product Definitions incl. Specifications
APPENDIX 2 Milestone Schedule
APPENDIX 3 Project Plan
APPENDIX 4 Quality Requirements
APPENDIX 5 Business Model incl. Pricing
APPENDIX 6 Mandatory Environmental Requirements
APPENDIX 7 Contact List
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 1(25)
This DEVELOPMENT AGREEMENT ("Agreement") No. (eslnso3t733) is made by and
between
NOKIA CORPORATION, represented through its Nokia Networks business group,
of Xxxxxxxxxxxxxx 0, X.X.Xxx 000, FIN-00045 Nokia Group, business identity
code 0112038-9, including its Affiliates ("Nokia"); and
Endwave Corporation, a Delaware corporation with its principal office at
000 Xxxxxxx Xxxxxx, Xxxxxxxxx, XX 00000 XXX ("Developer")
WHEREAS
(A) Nokia is a developer, manufacturer and supplier of sophisticated
communications equipment and terminals, accessories and connectivity
solutions.
(B) Developer is a reputable developer, supplier and supporter of hardware
and, as applicable, thereto related software technologies.
(C) Developer and Nokia desire that Developer performs certain development for
Nokia in accordance with this Agreement.
NOW IT IS HEREBY AGREED:
1 DEFINITIONS
"Affiliate"
of a Party means an entity
(i) which is directly or indirectly controlling such Party; or
(ii) which is under the same direct or indirect ownership or control as
such Party; or
(iii) which is directly or indirectly owned or controlled by such Party.
For these purposes, an entity is considered as being controlled by
another, if that other entity has fifty percent (50%) or more of the votes
in such entity, is otherwise able to direct its affairs and/or to control
the composition of its board of directors or equivalent body.
"Background IPR"
means any and all Intellectual, Property Rights in all Background Works
globally, whether registered, otherwise effected or not.
"Background Works" means any and all:
(i) technical data, designs, documents, drawings, inventions, concepts,
test results, tooling, specifications, software, models, samples,
know-how and other information, materials and works, to the extent
they are; and
(ii) Product(s), Deliverables, Product Documentation, Specifications and
parts thereof, to the extent they are
held by, licensed to, devised by or devised for a Party hereto either
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 2(25)
(i) prior to the commencement of the Development; or
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 3(25)
(ii) outside and in no relation to the Development
as evidenced by the Party asserting the item in question to constitute a
Background Work.
"Certificate of Approval"
means a certificate of approval that will be signed by Nokia, if the
Deliverables and/or the performance of other obligations of Developer due
at a Milestone are approved by Nokia.
"Certificate of Final Acceptance"
means a certificate of final acceptance that will be signed by Nokia, if
the Deliverables last due hereunder are approved by Nokia and provided
that Nokia also approves the Developer's performance of its other
Development obligations hereunder, without prejudice to the Parties'
rights and obligations hereunder.
"Change"
means any change to Product(s), Deliverables, Specification (s) or
Development. For avoidance of doubt, it is agreed that mere change of the
Project Plan, Project Schedule, therein contained Milestones or status of
Development, e.g. delays, is not considered a Change.
"Deliverable"
means any result of Development to be delivered by Developer to Nokia
hereunder, including without limitation Engineering Samples, DV Units, PV
Units and Documentation.
"Deliverable Prices"
means the fixed maximum cost and mutually agreed price to be paid by Nokia
to the Developer as consideration for the Engineering Samples, DV Units
and PV Units pursuant to Clause 9 below.
"Design Validation Unit(s)" or "DV Unit(s)"
means fully working and properly tested prototypes of the Product(s)
packaged into final delivery format that meet the Specifications. These
prototypes will be fully characterised upon delivery to Nokia. These
prototypes will be used for final validation of the Product.
"Development"
means any development work and other measures and services to be performed
by Developer under this Agreement including, without limitation, the
development and delivery of various Deliverables.
"Development Fee"
means the development fee payable by Nokia in accordance with Appendix 5
and Clause 9 below to Developer as consideration for the performance of
Development and for the rights granted, licensed and/or transferred by
Developer hereunder.
"Effective Date"
means the date of the last signature below.
"Engineering Sample(s)"
means mechanical specifications compliant first functional samples that
are at least direct current (DC) and main radio frequency (RF) function
tested. These modules and devices are intended for preliminary testing.
Some deviation from applicable Specifications is allowed for these
samples.
"Foreground IPR"
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 4(25)
means any and all Intellectual Property Rights in all Foreground Works
globally (excluding any Nokia Proprietary Items).
"Foreground Works" means any and all:
(i) technical data, designs, documents, drawings, inventions,
concepts, test results, tooling, specifications, software,
models, samples, know-how, and other information, materials
and works, to the extent they are; and
(ii) Product(s), Deliverables, Product Documentation,
Specifications and parts thereof, to the extent they are
devised or created by Developer or by a third party for Developer in the
performance of Development. For the avoidance of doubt, Foreground Works
exclude any Nokia Proprietary Items.
"Intellectual Property Right"
means any worldwide intellectual property rights, including without
limitation patents (including utility models and rights to patent an
invention), design patents, designs (whether or not capable of
registration), chip topography rights and other like protection,
copyrights, trademarks and any other forms of like statutory protection as
well as any applications, divisions, continuations, renewals, reexams and
reissues thereof as well as any trade secrets and other information or
know-how subject to statutory protection.
"Manufacturing Information"
means Specifications and other technical and commercial documentation and
information, irrespective of its form, necessary for the manufacturing of
Product(s) by Developer (including without limitation and as applicable,
information on Developer's suppliers, sub-suppliers and subcontractors,
from which it procures Third Party Components (if any) and raw materials
for Product(s) and its contract manufacturers and other subcontractors
participating in the manufacturing of Product(s)).
"Milestone"
means phase of the Development as specified in the Project Schedule.
"Nokia Bank Link Policy"
means the Nokia centralized system for payments, pursuant to which all
invoices maturing during a working week (i.e. Monday through Friday) are
consolidated and paid on one predetermined business day during that same
week, irrespective of the due date of the invoice. At the moment, the
payment day is Wednesday, but the payment day is subject to change by
Nokia at any time without notice.
"Nokia Direct Competitor"
means Telefonaktiebolaget LM Ericsson, Motorola Inc., Siemens AG,
Compagnie Financiere Alcatel, Lucent Technologies Inc., Samsung
Electronics Company Ltd., Qualcomm Inc., Nortel Networks Corp., or any
other major company with a broad product portfolio whose primary business
is telecom infrastructure and in addition Microsoft Corporation and Cisco
Systems, Inc.
"Nokia Proprietary Items"
means any and all functionalities, features, components, parts, software,
software interfaces, electrical interfaces and other like items that are
(i) provided by Nokia to Developer hereunder or (ii) developed by or on
behalf of Developer under this Agreement to the extent such items are
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 5(25)
derivative works of or modifications to any of Nokia's Background Work or
to any other Nokia Proprietary Item Nokia Proprietary Items include,
without limitation, the following items:
(i) the electrical interfaces specified in applicable Specifications
between the Products and any other products or parts thereof
commercialized by Nokia; and
(ii) the content of the EEPROM or other memory device specified in the
applicable Specifications.
"Not to Exceed Prices"
means the maximum prices specified in Appendix 5 payable by Nokia to
Developer for Product(s) possibly purchased under the Purchase Agreement.
"Product(s)"
means the microwave units to be developed hereunder and, subject to a
possible successful outcome of Development and at a separate request of
Nokia, also supplied by Developer to Nokia under the Purchase Agreement.
"Product Documentation"
means any and all information, instructions, drawings, models, layouts and
materials that are documented on any media and that are related to the
use, reliability, properties, functionality, performance, installation,
maintenance or support of Product(s), Engineering Samples, and/or
Development thereof.
"Production Validation Unit(s)" or "PV Unit(s)"
means fully working and properly tested Product(s) built on the production
line, which will be used for the volume production of respective
Product(s) under the Purchase Agreement and that meet the Specifications.
"Project Plan"
means the then current version of the project plan attached hereto as
Appendix 3 defining the Development and related matters. For avoidance of
doubt, it is agreed that Project Plan always means the then current
mutually agreed version of Project Plan.
"Project Schedule"
means the then current version of the project schedule for the Development
attached hereto as Appendix 2. For avoidance of doubt, it is agreed that
Project Schedule always means the then current mutually agreed version of
Project Schedule.
"Purchase Agreement"
means the purchase agreement no 1201000 or any later replacement thereof
agreed to between the Parties that defines the terms and conditions of the
delivery, sale and purchase of applicable products and, subject to a
successful outcome of Development, to also cover the delivery, sale and
purchase of Product(s).
"Specification(s)"
means the then current technical and/or functional specification(s) and
other requirements for Product(s) and/or Development attached hereto as
Appendix 1. For avoidance of doubt, it is agreed that Specifications
always mean the then current mutually agreed version of Specifications.
"Third Party Component"
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 6(25)
means any hardware and/or software component or part of any Deliverable or
Product, to the extent Intellectual Property Rights in the component are
not (i) held by Developer or (ii) licensed to Developer by Nokia.
2 DEVELOPMENT
2.1 Purpose of Development
The purpose of this Agreement is to agree upon the terms and conditions,
which apply to the Development of Deliverables and Product(s) by Developer
for Nokia and the delivery of Deliverables to Nokia.
Developer shall deliver Deliverables to Nokia in accordance with the
Project Plan, Project Schedule and Clause 7 below. All Deliverables,
excluding Engineering Samples, shall upon delivery conform to applicable
Specifications and other requirements hereunder.
2.2 Independent Parties
The Parties are and will remain independent contractors hereunder. This
Agreement does not create any partnership, franchise, joint venture,
agency, distributorship, representative or employment relationship between
the Parties or between Nokia and any Affiliate, subcontractor or employee
of Developer.
2.3 General Inspection Rights
Developer shall, upon reasonable notice by Nokia and within Developer's
business hours, provide Nokia and/or its authorized representative with:
(i) access to all facilities and premises that may be reasonably
required for Nokia to enable the monitoring of the progress of the
Development ; and
(ii) opportunity to inspect and verify at source that Development,
Deliverables and Product(s) conform to applicable Specifications and
other requirements hereunder.
Any such inspection or verification shall be without prejudice to any
rights and obligations of the Parties' hereunder and under the Purchase
Agreement and shall not be used by Developer as evidence of any control
over Development by Nokia.
3 RESOURCES
3.1 Time is of Essence
The Parties agree that time of delivery of Deliverables and other
performance of Development is of essence for this Agreement. Developer
acknowledges that one or several product programs of Nokia may be
dependent on the successful and timely completion of the Development in
accordance with the Project Schedule and Project Plan.
3.2 Resources
Developer shall ensure that its participation in any other projects shall
not in any way adversely affect the proper fulfillment of Developer's
obligations hereunder. Developer shall at all times allocate sufficient
resources for the Development so as to ensure that the Milestones can
realistically be achieved. Developer agrees to allocate and use for the
Development the
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 7(25)
necessary and suitable latest state of art technologies, tools, equipment,
know-how and technical information. Developer shall carry out the
Development with professional diligence and skill. The Developer shall not
transfer the Development to other physical premises without prior written
consent of Nokia.
3.3 Developer's Personnel
Developer shall assign personnel of appropriate competence and experience
to perform Development and its other obligations hereunder and shall
change such personnel as rarely as reasonably possible. Developer shall
ensure that all personnel assigned by Developer to perform Development
are:
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 8(25)
(i) employees of Developer or, to the extent Nokia has consented to the
use of subcontractors, employees of such subcontractors; and
(ii) bound to confidentiality obligations not less restrictive than those
applicable to Developer hereunder; and
(iii) are subject to Developer's supervision as an employer or, to the
extent Nokia has consented to the use of subcontractors, subject to
other sufficient supervision of Developer.
3.4 Subcontractors
In the absence of advance written consent by Nokia, Developer shall not
engage any subcontractor or other third party to perform any part of
Development. However, notwithstanding any such possible consent by Nokia,
Developer shall remain fully responsible and liable for the performance of
its subcontractors and shall ensure that the agreements with its possible
subcontractors impose, as a minimum, the duties and obligations on
subcontractors with respect to confidentiality and Intellectual Property
Right ownership issues that are substantially similar to those imposed on
Developer under this Agreement.
3.5 Production Capability
The Parties acknowledge that it is the current contemplation of Nokia,
subject to a successful outcome of Development, to use and/or sell the
Product(s) in certain volumes and that, consequently, production
capability and cost effectiveness of the Product(s) are critical factors
for the successful completion of Development. Developer shall ensure that
it is, upon the issuance of Certificate of Final Acceptance, able to
manufacture and deliver to Nokia Product(s) in the quantities specified in
the Appendix 5 - (Business Model incl. Pricing) or Purchase Agreement. For
avoidance of doubt it is agreed, that this Agreement constitutes no
obligation whatsoever for Nokia to purchase any Product(s) or other items
from Developer.
Developer warrants that, in the absence of Nokia's clear written
instructions to the contrary, it shall maintain the manufacturing process
for the Product(s) or the capacity to promptly implement such process at
least until [*] years have passed from the beginning of the deliveries of
Product(s) under the Purchase Agreement.
Developer shall prepare a documented production recovery plan as set out
in Appendix 2, which shall define in detail, how Developer has arranged
the recovery from any incidents affecting any production lines or plants
related to production of Product(s). Upon request, Developer shall
promptly provide Nokia with a copy of said recovery plan. Upon reasonable
notice by Nokia and within Developer's business hours, Developer shall
further allow Nokia and/or its authorized representative to audit the risk
management systems of Developer. Developer shall promptly implement all
reasonable instructions given by Nokia with respect to Developer's
Product-related production recovery plan and risk management systems.
4 SPECIFICATIONS
4.1 General
In case the Specifications have not been agreed on or prior to the
Effective Date, the Parties shall without undue delay agree in writing on
the Specifications. Nokia may before the Specifications are agreed on
provide to Developer certain functional specifications, which may
constitute the basis for more detailed Specifications. The Parties may at
any time mutually agree on updated
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 9(25)
Specifications replacing the old Specifications. The Developer is
responsible for implementing the Specifications in the Deliverables and
Products.
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 10(25)
4.2 Third Party Components
Upon Nokia's request, Developer shall promptly provide Nokia with such
available data, that can be disclosed to Nokia without violating
Developer's confidentiality obligations, on all Third Party Components
included or contemplated to be included in Deliverables and/or Products,
including without limitation information on commercial sources and
specific types of all such Third Party Components. Notwithstanding any
disclosure of such information by Developer, Nokia shall under no
circumstances bear any liability for Third Party Components or Developer's
use thereof in Development or subsequent volume delivery stage.
4.3 Packing Requirements
Deliverables shall be packed and packaged properly to withstand
transportation and different weather conditions and as possibly separately
required by Nokia in writing. Developer agrees to indemnify Nokia against
any damage that the Deliverables may suffer due to improper or
non-conforming packaging and/or packing.
5 CHANGES
5.1 General
Nokia may require and Developer may recommend any Changes. Developer shall
promptly inform Nokia of any Changes it is or reasonably should be aware
of that are necessary (i) for duly performing the Development, (ii) for
Deliverables and/or Product(s) to conform to Specifications, or other
requirements hereunder or to function as intended and/or (iii) for any
detected inconsistency, discrepancy, error or omission in or between the
Specifications and any instructions given by Nokia.
Developer shall promptly undertake to investigate the possibility to
implement any Changes required by Nokia and the technical and commercial
consequences of such Changes irrespective of whether or not the Parties
have yet agreed on the Change in writing.
The Parties will respond in writing or meet to discuss any Change, if
necessary. Promptly upon Nokia's request, Developer shall advise Nokia of
the likely consequences of the Change, including without limitation any
effects on the safety, quality, reliability, availability, form or
performance of Deliverables or Product(s) and any effects on the
Development Fee, Deliverable Prices, prices of Product(s), Project
Schedule, therein contained Milestones and/or Project Plan and submit a
written quotation to Nokia accordingly.
Changes shall be explicitly defined and agreed on in writing by, for
example, amending the Specifications and Developer shall promptly
implement any Changes having been agreed on in writing.
For avoidance of doubt, it is agreed that in case Developer wishes to
implement any Changes before the Parties having agreed in writing on the
Changes, then Developer is entitled to do so at Developer's sole risk and
expense, provided that such implementation does' not endanger the
continued proper performance of Development in case Nokia later elects to
reject the Change or in case the Parties are unable to agree on the
Change.
5.2 Pricing of Changes
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 11(25)
Developer shall implement the Changes for a [*]. Notwithstanding the
above, the Change shall be implemented by Developer [*].
Notwithstanding the above, if a Change becomes necessary in order to
comply with any terms and conditions of this Agreement or for the
Product(s) to conform to applicable Specifications, [*].
6 QUALITY REQUIREMENTS
6.1 General
Developer shall in the performance of Development comply with the quality
requirements attached hereto as Appendix 4. Developer agrees to promptly
inform Nokia of any existing or suspected discrepancies in Product(s),
Deliverables and/or Development in relation to such quality requirements
and shall promptly correct any such discrepancies. Nokia may, where
appropriate, request reasonable improvements in Developer's practices and
procedures to ensure compliance with such quality requirements and
Developer shall promptly implement such requests.
In case no traceability requirements are contained in Appendix 4, then
Developer shall in the performance of Development and volume deliveries of
Product(s) under the Purchase Agreement comply, at Developer's sole cost
and expense, with all reasonable traceability requirements provided by
Nokia to Developer.
6.2 Quality of Raw Materials and Components
Developer shall duly inspect and constantly monitor the quality of all raw
materials and components used in the Development hereunder, including
without limitation the manufacturing and delivery of Deliverables, in
order to ensure the continuous high quality level of Development and
Deliverables.
6.3 Quality Audits
Nokia shall, upon reasonable notice to Developer and within Developer's
business hours, be entitled to perform and/or to have its authorized
representatives perform reasonable audits of Developer's compliance with
this Clause 6 and Developer shall promptly correct any deficiencies found
during any such audit.
7 DELIVERY, TESTING AND ACCEPTANCE
7.1 General
Developer shall carry the Development out timely and diligently in
accordance with the Project Schedule, therein contained Milestones and
Project Plan. The Development is divided into various Milestones, as
specified in Project Schedule.
At the latest upon each Milestone, Developer shall deliver to Nokia the
Deliverables (if any) due at the Milestone in question and/or perform its
other obligations due at the Milestone. The terms of delivery for the
delivery of Deliverables shall be [*] to the agreed destination.
Developer shall, prior to shipment of Deliverables to Nokia, test the
Deliverables properly and in accordance with the agreed test procedures as
well as provide Nokia with a comprehensive
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 12(25)
written report on the results of such testing. The Developer shall also
provide Nokia with a comprehensive written report on its performance of
other obligations due at the Milestone.
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 13(25)
7.2 Approval of Milestones
Without undue delay after a Milestone other than the final one, the
Parties shall review the results of the Milestone on the basis of written
report(s) submitted by Developer to Nokia. If the results meet the
requirements set forth in Appendix 2 (Milestone Schedule) and upon
Developer performing its other obligations due at said Milestone, a
Certificate of Approval for the Milestone in question shall be signed by
Nokia signifying the completion of that Milestone without prejudice to the
Parties' rights and obligations hereunder.
7.3 Testing- and Acceptance of DV Units and PV Units
Nokia shall test the DV Units and PV Units for defects, failures and other
problems in performance, functionality, quality and other errors. Nokia
shall notify Developer of any found defects, failures or other problems in
the performance, functionality, quality or other errors.
Within [*] days from receiving the DV Units and/or PV Units, Nokia will
provide the Developer with a Certificate of Acceptance or a statement of
rejection for said DV Units and/or PV Units In the event of rejection,
Nokia shall provide a list of issues to be corrected before the DV Units
or PV Units can be accepted by Nokia. Developer shall [*] to correct said
issues at [*] and as a minimum, within [*] weeks upon receipt of the
statement and of the rejected DV Units or PV Units from Nokia, provide
Nokia with a root cause analysis and time estimate for the corrections.
Within [*] days from redelivery of DV Units and/or PV Units, Nokia will
provide the Developer with a Certificate of Acceptance or another
statement of rejection with a list of issues to be corrected. This
procedure will be repeated until Nokia accepts the DV Units and PV Units,
unless Nokia chooses to terminate this Agreement in accordance with this
Agreement.
7.4 Acceptance of Final Milestone
In the event the PV Units and other Deliverables due hereunder meet the
requirements set forth in Appendix 2 (Milestone Schedule) and upon
Developer's performing its other Development obligations hereunder, Nokia
will without undue delay provide Developer with a separate Certificate of
Final Acceptance signifying the completion of Development without
prejudice to the rights and obligations of the Parties hereunder.
7.5 No Waiver of Rights
The testing performed as well as the acceptances and approvals granted
under this Clause 7 shall be without prejudice to any rights of Nokia
hereunder.
8 DELAYS
8.1 Monitoring of Progress
Developer shall continuously monitor the status and progress of
Development in order to ensure that any possible failures in meeting the
dates set forth for any Milestone are identified well in advance. If the
Developer cannot deliver to Nokia any Deliverable(s) or perform any of its
other obligations hereunder in accordance with the Milestones, then the
Developer shall as soon as Developer is or should reasonably have been
aware of delay, inform Nokia thereof in writing specifying the reason for
the delay and propose a new date for the delivery of such Deliverables or
performance of obligations. Upon receipt of such notice, Nokia will
determine whether a new date for the delayed Milestone is warranted given
the circumstances causing the delay.
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 14(25)
8.2 Delayed Milestone
For the purposes of this Agreement, a Milestone shall be deemed delayed:
(i) In case the Deliverables due at the Milestone are not delivered to
Nokia in full compliance with this Agreement; and/or
(ii) in case Developer fails to perform any of its other obligations due
at the Milestone in full compliance with this Agreement
at the latest upon the date set forth for the Milestone in question and
provided that the delay is not solely attributable to Nokia or an event of
Force Majeure pursuant to Clause 16 below.
8.3 Termination Due to Delayed Milestone
Notwithstanding any other provisions of this Agreement, in case a
Milestone is delayed for [*] days or more (or [*] days or more in the
event the delay is solely attributable to a third party's failure to
supply [*]) and provided that the delay is not solely attributable to
Nokia or an event of Force Majeure pursuant to Clause 16 below, then Nokia
may, without prejudice to its other rights and remedies hereunder, [*].
9 PRICING
9.1 Development Fee
The Development Fee is specified in Appendix 5 (Pricing) and shall
constitute full consideration for all rights granted, licensed and/or
transferred to Nokia hereunder and for all expenses and costs incurred by
Developer from the performance of the Development, including without
limitation, all Development costs, travel costs, costs of premises,
packing costs, transportation and insurance costs, import tariffs, taxes,
duties, inspection fees, costs of tools and materials, non-recurring
engineering (NRE) costs, installation costs, product validation/type
approval costs, testing and implementation costs and costs of the
production and delivery of Deliverables.
Unless otherwise agreed in Appendix 5 (Pricing), the Development Fee is
subject to payment in installments on a per Milestone basis pursuant to
and subject to Developer meeting the requirements specified in Appendix 5
(Pricing) and/or the Milestones specified in Project Schedule. Payment of
such installments shall take place against invoices drawn correctly by
Developer in accordance with Appendix 5, the dates of which shall be later
than the date when the requirements for each payment are met. The payment
term is [*] days from the date of each invoice and is subject to Nokia
Bank Link policy.
9.2 Deliverable Prices
The Deliverable Prices payable by Nokia for DV Units and PV Units are
specified in Appendix 5 together with the amount of such Deliverables
subject to payments by Nokia.
The payment of the Deliverable Prices shall be carried out by Nokia
against invoices drawn by Developer in accordance with Appendix 5, the due
date of which shall be later than the date when Nokia receives the
relevant DV Units and PV Units. The payment term is [*] days from the date
of each invoice. Payments will be made according to the Nokia Bank Link
policy.
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 15(25)
9.3 Cost Reductions
Developer shall use commercially reasonable efforts to pursue cost
reduction opportunities and price reductions with respect to costs and
expenses of Development, including without limitation costs of raw
materials and components. Obtained cost reductions shall be reflected by
lowering the Development Fee and Deliverable Prices in a reasonable manner
to be mutually agreed.
10 INTELLECTUAL PROPERTY RIGHTS AND INDEMNIFICATION
10.1 General
Developer warrants that it shall not violate or infringe any Intellectual
Property Rights of any third party during Development, manufacturing or
delivery of Deliverables, Product(s) and/or modifications thereof
hereunder.
For avoidance of doubt, it is agreed that, unless otherwise agreed in this
Agreement, the delivery of any documentation and/or specifications
(including without limitation Product Documentation and Specifications)
relating to Development, any Deliverables, Product(s) and/or parts thereof
from a Party to the other Party shall not transfer any Intellectual
Property Rights in such documentation and/or specifications to the
receiving Party, unless otherwise agreed in writing, but the receiving
Party shall be entitled to use such documentation and/or specifications
for the performance of this Agreement and/or the Purchase Agreement.
10.2 Background IPR
Except for the limited licenses granted in this Agreement, nothing in this
Agreement shall be construed as: (a) granting Nokia any right, title, or
interest in or to Developer's Background Works or Developer's Background
IPR, or (b) granting Developer any right, title, or interest in or to
Nokia's Background Works or Nokia's Background IPR. Each Party's
Background Works and Background IPR shall remain vested with such Party.
Subject to the terms and conditions of this Agreement, Developer hereby
grants Nokia under its Background IPR a [*], with the right to[*], to (a)
use, sell, distribute and market Deliverables and Product(s) and combine
such items with any other items. For avoidance of doubt, it is agreed that
a license to manufacture and have manufactured Product(s) is granted to
Nokia only in the situations described in Clause 11.2 below.
Subject to the terms and conditions of this Agreement, Nokia hereby grants
Developer under Nokia's Background IPR a [*], with the right to[*], to
use, reproduce, and modify Nokia's Background Works for the sole purpose
of Developer (a) performing its obligations under this Agreement, or (b)
supplying Products to Nokia under the Purchase Agreement. Said license
shall be effective for the term of this Agreement and the term of the
Purchase Agreement (if Nokia elects to purchase Products from Developer
under the Purchase Agreement).
10.3 Foreground IPR
As between the Parties, Developer shall own all right, title, and interest
in and to all Foreground Works and Foreground IPR. Except for the limited
licenses granted in this Agreement, nothing in this Agreement shall be
construed as granting Nokia any right, title, or interest in or to the
Foreground Works or the Foreground IPR.
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 16(25)
When an employee or subcontractor of Developer is engaged to perform any
Development, Developer shall ensure at the outset that all Foreground IPR
devised by the employee or subcontractor are either duly transferred to
Developer or duly licensed to Developer.
Subject to the terms and conditions of this Agreement, Developer grants
Nokia under its Foreground IPR a [*], with the right to[*], to (a) use,
sell, distribute and market Deliverables and Product(s) as well and
combine such items with any other items. For avoidance of doubt, it is
agreed that a license to manufacture and have manufactured Product(s) is
granted to Nokia only in the situations described in Clause 11.2 below.
10.4 Nokia Proprietary Items
Notwithstanding Clauses 10.2 and 10.3 above, Developer hereby transfers to
Nokia all of its present and future Intellectual Property Rights in Nokia
Proprietary Items, any modifications and derivative works thereof and in
any results of their implementation into Product(s). Developer
acknowledges and undertakes that it shall use such Nokia Proprietary
Items, any modifications and derivative works thereof and any results of
their implementation into Product(s) only for performing its obligations
hereunder and under the Purchase Agreement.
Subject to the terms and conditions of this Agreement, Nokia hereby grants
Developer under Nokia's Intellectual Property Rights in the Nokia
Proprietary Items a [*], with the right to[*], to use, reproduce, and
modify the Nokia Proprietary Items for the sole purpose of Developer (a)
performing its obligations under this Agreement, or (b) supplying Products
to Nokia under the Purchase Agreement. Said license shall be effective for
the term of this Agreement and the term of the Purchase Agreement (if
Nokia elects to purchase Products from Developer under the Purchase
Agreement).
10.5 Third Party Components
If Developer includes any Third Party Component in any Deliverable or
Product(s), Developer will first obtain from the supplier of such Third
Party Component sufficient rights under applicable third party
Intellectual Property Rights to enable Nokia to use, sell, distribute, and
market the Deliverables and Product(s).
10.6 Conditional Commercialization
In the absence of prior written consent by Nokia, Developer shall not
license, manufacture, modify, develop further, sell, distribute or
otherwise utilize any Specifications, Deliverables, Product(s) or other
products (if any of the foregoing contain Nokia Proprietary Items and/or
modifications or derivative works thereof) to or in co-operation with any
third party.
10.7 IPR Indemnification
Developer shall settle and/or defend at its own option and its own
expense, and indemnify and hold harmless Nokia, its Affiliates and their
respective customers, subcontractors, suppliers and contract manufacturers
(the "Nokia Indemnitees") from any cost, expense, loss, attorney's fees or
damage arising out of any claim, demand, suit or proceeding against Nokia
Indemnitees to the extent such claim, demand, suit or proceeding is based
on (i) any infringement or alleged infringement of Intellectual Property
Rights of a third party by the Developer's Development or Deliverables
(excluding Nokia Proprietary Items) or by any utilization thereof, (ii)
any methods
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 17(25)
used by Developer for manufacturing of Deliverables, or (iii) the exercise
by Nokia of any Intellectual Property Rights licensed hereunder to Nokia
or the exploitation by Nokia of any Intellectual Property Rights
transferred to Nokia hereunder, provided that (1) Nokia informs Developer
in writing of any such claim, demand, suit or proceeding without delay,
(2) Developer is given sole control over the defence thereof and Nokia
reasonably cooperates in the defence at Developer's expense, and (3) Nokia
will not agree with the third party to the settlement of any such claim,
demand, suit or proceeding prior to a final judgment thereon without the
prior written consent of Developer, which consent shall not be
unreasonably withheld. Nokia shall have the right to select its own
counsel to participate in such defence at Nokia's own expense.
Notwithstanding the Developer's primary right to have control over
defence, (i) Nokia may take all necessary steps, at the expense of the
Developer, to defend itself until the Developer, to the reasonable
satisfaction of Nokia, assigns a counsel and initiates defence in a
professional manner; and (ii) whenever the third party making such claim
is a customer to the Developer, Nokia may, at its option and at the
expense of Nokia, have full control over defence, and the Developer agrees
to fully cooperate with such defence.
The foregoing states Nokia's sole and exclusive remedy in the event
Developer violates or infringes any Intellectual Property Rights of any
third party during Development, manufacturing or delivery of Deliverables,
Product(s) and/or modifications thereof hereunder.
This indemnification does not apply to the extent that (i) infringement
arises by a combination made a Nokia Indemnitee of Deliverables with other
products not furnished by Developer except to the extent Developer is a
contributory infringer, (ii) infringement arises solely from changes or
modifications made to or from Deliverables by a Nokia Indemnitee, or (iii)
infringement arises from Deliverables that are made, or methods that are
used, in accordance with drawings, samples, or manufacturing
specifications that are designated by a Nokia Indemnitee and Developer
proves that such infringements arise solely from such drawings, samples,
or manufacturing specifications that are designated by a Nokia Indemnitee.
If a claim, demand, suit or proceeding alleging infringement is brought or
Developer believes one may be brought, Developer shall have the option, at
its expense, to (1) modify the Deliverable to avoid the allegation of
infringement, while at the same time maintaining compliance of the
Deliverable with the requirements set forth under this Agreement, (2)
replace the Deliverable with non-infringing but equivalent Deliverable,
which comply with the requirements set forth under this Agreement; or (3)
obtain for Nokia, at no cost to Nokia a license to continue using and
exploiting the Deliverable in accordance with this Agreement free of any
liability or restriction.
In the event any Deliverable to be furnished under this Agreement is to be
made in accordance with drawings, samples, or manufacturing specifications
designated by Nokia and to the extent such Deliverable is not the design
of Developer, Nokia agrees to settle and/or defend; at its own option and
its own expense, and indemnify and hold Developer harmless from any cost,
expense, loss, attorney's fees or damage arising out of any claim, demand,
suit or proceeding against Developer to the extent such claim, demand,
suit or proceeding alleges that such Deliverable or drawings, samples, or
manufacturing specifications designated by Nokia infringes upon any
Intellectual Property Right of a third party, provided that (1) Developer
informs Nokia in writing of any such claim, demand, suit or proceeding
without delay, (2) Nokia is given sole control over the defence thereof
and Developer reasonably cooperates in the defence at Nokia's expense, and
(3) Developer will not agree with the third party to the settlement of any
such claim, demand, suit or proceeding prior to a final judgment thereon
without the prior written consent of Nokia, which consent shall not be
unreasonably withheld. Developer shall have the right to select its own
counsel to participate in such defence at Developer's own expense.
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[NOKIA LOGO] 18(25)
This indemnification does not apply to the extent any infringement or any
claim of infringement results from changes or modifications made by
Developer or on behalf of Developer to the drawings, samples,
manufacturing specifications or any other information designated by Nokia.
10.8 Non-Assertion of IPR
Because Product(s) will be developed to Nokia proprietary Specifications
and possibly with certain direct or indirect financing of Nokia, Developer
and its Affiliates hereby covenant and agree to (1) [*] from [*] based on
any of their [*] or [*] or [*] such rights (2) in relation to [*] or [*]
or [*] based on [*] or [*] (3) [*] its [*] and/or their [*] and [*] (4) to
the [*] are [*] by [*] of the [S*] or [*] (5) provided that such [*] could
not have been [*] and [*] of [*] or [*] provided however, that the fact
that [*], its [*] and/or their [*] and [*] may or will incur increased
costs by [*] of [*] shall not be deemed to [*] such [*]. This obligation
of [*] shall [*] acknowledges that the [*] given in this Clause 10.8 is a
material condition for this Agreement and has been taken into account and
reflected in determining the content of this Agreement and in the decision
by each Party to enter into this Agreement.
10.9 No Implied Rights
Except as expressly provided herein and in Clause 11 (Manufacturing Rights
and Information), no right or license under any Intellectual Property
Right of a Party is granted to the other Party under, or is to be inferred
from, any provision of this Agreement.
11 MANUFACTURING RIGHTS AND INFORMATION
11.1 Escrow Agreement
Within [*] days after delivery by Nokia to Developer of the Certificate of
Final Acceptance, Nokia and Developer will enter into a technology escrow
agreement with a third-party escrow agent selected by Nokia and reasonably
acceptable to Developer (the "Escrow Agreement"). Pursuant to the Escrow
Agreement, Developer will promptly deposit with the escrow agent the
then-existing Manufacturing Information and, upon Nokia's acceptance of
any implemented Changes whatsoever to any Specifications or any
Product(s), Developer will promptly deposit with the escrow agent any
updated Manufacturing Information. [*] shall [*] under the Escrow
Agreement. Before any deposit, Nokia may, solely at the presence of a
representative of the Developer, briefly review the Manufacturing
Information so as to generally ascertain that its contents comply with the
requirements of this Agreement and Developer shall, upon request,
demonstrate to the reasonable satisfaction of Nokia that the contents do
comply with said requirements.
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO) 19(25)
11.2 Trigger Events
Under the terms of the Escrow Agreement, Nokia will have the right to
obtain the Manufacturing Information in the event that Nokia elects to
purchase Products under the Purchase Agreement and, thereafter, any of
the following events (each, a "Trigger Event") occurs:
(1) a breach by Developer against a material obligation under the
Purchase Agreement, which breach is not duly remedied within a
reasonable time fixed by Nokia, which period shall not be less
than [*] days, in a written notice drawing the attention of
Developer to the breach and requiring the breach to be
remedied; and/or
(2) Developer (A) becoming insolvent, filing for any form of
bankruptcy or re-organization proceedings, making any
assignment for the benefit of creditors, having a receiver,
administrative receiver or officer appointed over the whole or
a substantial part of the assets or ceasing to conduct any
material part of its business relating to any Product(s), and
(B) in connection with any of the foregoing Developer breaches
its obligation to accept and fulfill orders for Products under
the Purchase Agreement, which breach is not duly remedied
within a time fixed by Nokia, which period shall not be more
than [*] week, in a written notice drawing the attention of
Developer to the breach and requiring the breach to be
immediately remedied.
(3) a material change in ownership in or effective control over
Developer (A) resulting in any Nokia Direct Competitor
obtaining control over the Developer, and (B) where such Nokia
Direct Competitor refuses to accept and fulfill orders for
Products in material breach of the terms of the Purchase
Agreement.
11.3 Manufacturing License
In the event of a Trigger Event, Developer grants to Nokia and its
Affiliates a [*] and right, without the right to sublicense, under all
Intellectual Property Rights of Developer, (i) to modify Product(s) or
have the Product(s) modified (provided, however, that Nokia will
indemnify and hold Developer harmless from and against any damages,
costs and expenses incurred by Developer in cases where such damages,
costs and expenses are solely due to Nokia's modifications), and (ii)
and manufacture, have manufactured, make, have made, use, sell, offer
to sell, and import such Products ("the Manufacturing License"). For
the avoidance of doubt, Nokia may use any Manufacturing Information for
such purposes provided, however, that Nokia shall treat such
Manufacturing Information as Developer's Information under Clause 17.
In addition to such license, Developer shall also provide Nokia with
assistance in getting access to Developer's suppliers, sub-suppliers
and subcontractors, from which it procures raw materials for Product(s)
and Third Party Components and to Developer's contract manufacturers
and other subcontractors participating in the production of Product(s).
Nokia hereby covenants and agrees that the Manufacturing License shall
only be exercisable if and when a Trigger Event occurs. Nokia hereby
further covenants and agrees that if a Trigger Event occurs and (i)
thereafter the Developer has been able to cure its breaching situation
mentioned in Clauses 11.2(1)-(3) for a continuous period of [*]days;
and (ii) the Developer has the capability to accept and fulfil orders
for Products under the Purchase Agreement, and (iii) the Developer
agrees to purchase from Nokia any raw materials or Third Party
Components that Nokia has purchased and committed to in order to
exercise its rights under the Manufacturing License, then Nokia will
purchase Products from Developer under the Purchase Agreement and
Nokia's right to exercise the Manufacturing License shall terminate.
Upon termination of Nokia's right to exercise the Manufacturing
License, Nokia shall return the Manufacturing Information to
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO) 20(25)
the third-party escrow agent named in the Escrow Agreement and shall
immediately destroy any copies thereof.
12 WARRANTIES
12.1 General
Nokia shall be entitled to use the PV Units for commercial pilots and
like projects after the issuance of Certificate of Final Acceptance for
relevant Product(s).
12.2 Warranty PV of Units
Developer hereby gives a warranty for each PV Unit delivered hereunder
by Developer that (i) at the time of delivery the PV Unit will be new
and unused (except for repaired PV Units provided under Clause 12.3),
and (ii) for a period of [*] from the delivery of the respective PV
Unit ("Warranty Period"), each PV Unit delivered shall:
(i) Be in [*]; and
(ii) Be [*]; and
(iii) Be [*]; and
(iv) Strictly conform to applicable Specifications, quality
requirements and other mutually agreed requirements.
For the purposes of this Clause 12, "Defect", shall mean any breach of,
non-conformance to or deviation from the warranty set out in this
Clause 12.2. This warranty does not apply if a Defect is (i) solely
attributable to Nokia Proprietary Items, (ii) any development
activities solely carried out by Nokia or solely attributable to the
Specifications provided by Nokia.
12.3 Examples of Remedies
If PV Units delivered do not meet the warranties given by Developer
during the Warranty Period, Nokia may at its own option and upon notice
to Developer require Developer to
(i) replace the PV Units with new PV Units that fully satisfy the
given warranties [*]; or
(ii) repair such PV Units [*]; or
(iii) [*].
If the remaining Warranty Period for the repaired/replaced PV Unit is
less than [*], the Warranty Period shall be extended to be [*] from the
date of receipt of the repaired/replaced PV Unit.
12.4 Hidden Defects
For the purposes of this Clause 12, "Hidden Defect" means such Defect,
which could not have been detected during an ordinary incoming
inspection and which are attributable to non-compliance by Developer
with any of the terms and conditions of this Agreement or to
Development performed by Developer. If Hidden Defects appear in PV
Units during or after the Warranty Period, then [*], undertake any and
all necessary corrective action(s) to ensure that the PV Units are made
to conform to all the terms of this Agreement and that such defects do
not reappear in PV Units. The corrective actions include but are not
limited to (i) [*], (ii) [*], (iii) [*]
[*] and/or (iv) [*]. [*].
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO) 21(25)
12.5 Notice on Defects
Nokia shall notify Developer of the Defects or Hidden Defects in
writing and also specify the [*] for Developer to perform corrective
actions. Developer shall respond to Nokia within [*] from the date of
Nokia's notice. Such response shall include a detailed outline of the
necessary corrective actions that Developer undertakes to perform in
order to remedy the Defect or Hidden Defect without delay. If Developer
is not able to perform the corrective actions and/or present a
correction plan that both Parties can accept [*], then Nokia is
entitled to, upon written notice to Developer
a) take the necessary corrective actions [*]; or
b) require Developer [*], or
c) [*].
12.6 Remedying of Defects by Nokia
If the Parties mutually agree on case-by-case basis that Nokia shall
undertake the repair or replacement of a Defect or Hidden Defect in PV
Units on behalf of Developer, Developer shall [*].
12.7 No Waiver of Rights
Notwithstanding anything to the contrary in this Agreement, Nokia shall
be entitled to [*].
12.8 Limited Warranty for DV Units
Developer warrants that DV Units conform to applicable Specifications,
quality requirements and other mutually agreed requirements hereunder,
to the extent reasonably possible bearing in mind the status of
Development, and that said items have been developed a manufactured
with professional diligence and skill. If any breach of,
non-conformance to or deviation from this warranty is found within [*]
months from the date of Nokia's reception of said DV Unit, Developer
shall [*]. In the event Developer fails to remedy such breach,
non-conformance or deviation within a reasonable time, then Developer
shall [*].
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO) 22(25)
12.9 Warranty for Product Documentation
All Product Documentation to be developed by Developer under this
Agreement shall:
(a) be [*];
(b) [*]; and
(c) [*]. If any Product Documentation is found containing a
deviation from the above warranties or if any Product
Documentation needs to be revised or updated as a result of
Defect contained in any PV Units or Product(s), Developer
shall also [*].
13 PURCHASE AGREEMENT
13.1 [*] Commitment
This Agreement constitutes [*] for [*] to [*] from [*]. Developer
agrees, at Nokia's separate request, to sell Product(s) to Nokia in
accordance with the Purchase Agreement. Any and all purchases under the
Purchase Agreement are at all times [*] in accordance with the Purchase
Agreement.
13.2 Amending the Purchase Agreement
By signing this Agreement, Developer undertakes to amend the Purchase
Agreement and/or its relevant appendices, if so requested by Nokia,
together with Nokia so that the Purchase Agreement will also cover the
delivery, sale and purchase of Product(s) developed hereunder in order
to ensure that Nokia will be able to order Product(s) from Developer
subsequent to the possible successful outcome of the Development.
13.3 Product Prices
The prices of Product(s) under the Purchase Agreement shall be
negotiated between the Parties, but shall not exceed the lower of:
(i) [*] or
(ii) [*]
For avoidance of doubt, it is agreed that the prices of Product(s)
under the Purchase Agreement may, if mutually agreed by the Parties, be
lower than the above mentioned amounts (i) and (ii).
13.4 Conflicting Provisions
In case of a conflict between the provisions of this Agreement and
those of the Purchase Agreement, the provisions of this Agreement shall
prevail over the provisions of the Purchase Agreement as regards
matters covered by both agreements, unless stated in the Purchase
Agreement that certain provision(s) thereof shall prevail over this
Agreement. For avoidance of doubt, it is agreed that warranties for
Product(s) delivered under the Purchase Agreement are agreed on in said
agreement.
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO) 23(25)
14 ENVIRONMENTAL AND ETHICAL ISSUES
14.1 General
Developer shall comply with the principles of the Business Charter for
Sustainable Development (published by the International Chamber of
Commerce in 1991) for environmental management. Developer shall
encourage the adoption of the principles therein by its sub-suppliers
and subcontractors. Nokia may, where appropriate, request improvements
in Developer's practices to ensure compliance with the said principles.
Developer shall take into consideration environmental issues in all
phases of Product Development and manufacturing process design.
Developer shall be committed to ethical conduct and respect for human
rights in the spirit of internationally recognized social and ethical
standards, e.g. SA8000. Developer further monitors the ethical
performance of its suppliers and subcontractors and takes immediate and
thorough steps in cases where ethical performance of its suppliers or
subcontractors comes into question.
14.2 Information to Provide and Environmental Requirements
Developer shall, upon request, inform Nokia of all materials,
substances and compounds by weight and by location in the
Products)/Deliverables in the form set out in Appendix 6.
Developer further shall, upon request, provide Nokia with instructions
for disassembly, re-use and end-of-life treatment of the
Products)/Deliverables, and with any other information that Nokia may
need based on statutory requirements.
Developer shall in designing of the Products and Deliverables and in
manufacturing and delivery of the Products/Deliverables strictly comply
with the Environmental Requirements and the schedule set forth in
Appendix 6 of this Agreement. Developer warrants, that each
Product/Deliverable that Developer delivers hereunder strictly conforms
to such requirements. In case any Product/Deliverable does not conform
to the Environmental Requirements as they exist at the time of
delivery, and where the law requires selective end-of-life treatment
for such Products)/Deliverables, Developer shall compensate Nokia for
any direct costs incurred by Nokia in connection with Nokia's selective
end-of-life treatment for such Products)/Deliverables.
14.3 Return of Defective Products
Developer shall be responsible for the proper disposal and/or recycling
of any defective Product(s)/Deliverables that are returned to and not
repaired by Developer.
14.4 Environmental Management System
Developer shall implement an environment management system (EMS) based
on the principles of ISO 14001 standard.
14.5 Compliance with laws
Developer represents and warrants that in the designing, manufacturing,
delivery and through entire the supply chain of the
Product(s)/Deliverables all national and international laws,
directives, statutes (including but not limited to EU statutes) and
regulations are diligently followed.
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO) 24(25)
15 LIABILITY
15.1 Exclusion of Certain Damages
Neither Party shall be liable to each other in contract, tort or
otherwise, whatever the cause thereof, for any loss of revenue or of
profit, business or goodwill or any indirect, special, consequential,
incidental or punitive costs, damages or expenses of any kind,
howsoever arising under or in connection with this Agreement, unless
arising out of or based on a breach by such Party of Clause 17
(Confidentiality), Clause 10 (Intellectual Property Rights and
Indemnification), Clause 15.2 below or caused due to intentional
misconduct or gross negligence of such Party.
15.2 Additional Indemnification Obligations
Developer shall indemnify, defend and hold harmless Nokia, its
Affiliates and their respective officers, directors, employees and
customers harmless from and against all damages, claims, demands,
suits, proceedings, damages, costs, expenses and liabilities, including
without limitation, reasonable legal fees incurred due to:
(i) [*]; and/or
(ii) [*]
resulting from or alleged to result from any act or omission of
Developer in the performance of Development and/or from any Defects in
the Deliverables or Product(s). Developer shall maintain in force and
on request give evidence of adequate insurance relative to its
obligations under this Clause.
Developer shall use counsel satisfactory to Nokia to defend against any
claims, demands, suits, proceedings, damages, costs, expenses or
liabilities mentioned above ("Claims" for the purposes of this Clause).
. Nokia shall have the right to select its own counsel to participate
in such defence at Nokia's own expense.
Nokia shall on its behalf indemnify, defend and hold harmless
Developer, its Affiliates and their respective officers, directors,
employees and customers harmless from and against all damages, claims,
demands, suits, proceedings, damages, costs, expenses and liabilities,
including without limitation, reasonable legal fees incurred due to:
(i) [*]; and/or
(ii) [*]
resulting from or alleged to result from any act or omission of Nokia
in the performance of this Agreement.
16 FORCE MAJEURE
Events of "Force Majeure" are events beyond the control of the Party,
which occur after the time of signing of this Agreement and which were
not reasonably foreseeable at the time of signing of this Agreement and
the effects of which are not capable of being overcome without
unreasonable expense and/or loss of time to the Party concerned. Events
of Force Majeure shall include (without limitation) war, civil unrest,
acts of government, natural disasters, fire, flood, earthquake,
explosions and acts of God.
Notwithstanding any other provision of this Agreement, neither Party
shall be liable to the other
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO) 25(25)
for any delay or non-performance of its obligations hereunder in the
event and to the extent that such delay or non-performance is due to an
event of Force Majeure.
If an event of Force Majeure results in delay or non-performance of a
Party for a period of [*] or longer, then either Party shall have the
right to terminate this Agreement with immediate effect without
liability towards the other Party.
17 CONFIDENTIALITY
17.1 General
For avoidance of doubt and notwithstanding this Clause 17, it is agreed
that the confidentiality undertakings provided for in this Clause 17 do
not limit in any way whatsoever Nokia's rights to utilize and disclose
Deliverables, Product(s), Specifications or other outcomes of the
Development or parts thereof in compliance with Clause 10 (intellectual
Property Rights and Indemnification) and Clause 11 (Manufacturing
Rights and Information) above.
Each Party ("Receiving Party" for the purposes of this Clause 17) shall
not, except to the extent required by law, disclose to third parties
nor use for any purpose other than for the proper fulfillment of the
purpose of this Agreement and/or the Purchase Agreement any technical,
financial or commercial information ("Information") received from the
other Party ("Disclosing Party") in whatever form under or in
connection with this Agreement without the prior written permission of
the Disclosing Party. The above mentioned limitations shall not apply
to Information which, as evidenced by the Receiving Party:
a) was in the possession of the Receiving Party prior to
disclosure hereunder; or
b) was in the public domain at the time of disclosure or later
became part of the public domain without breach of the
confidentiality obligations herein contained; or
c) was disclosed by a third party without breach of any
obligation of confidentiality owed to the Disclosing Party; or
d) was independently developed by personnel of the Receiving
Party having no access to the Information of the Disclosing
Party.
Without prejudice to the generality of the foregoing, each Party agrees
not to use any of the Information or technology of the other Party for
any use or purposes except those expressly specified herein.
17.2 Affiliates, Personnel and Subcontractors
Affiliates of a Party hereto engaged in the performance of this
Agreement shall not be deemed to be third parties for purposes of this
Clause 17 on condition that disclosure of Information occurs on a need
to know basis only and that the respective Party ensures full
compliance by such Affiliates of all of the provisions of-this Clause
17.
Developer shall not disclose any Information of Nokia to its
subcontractors, unless Nokia has consented to the use of any such
subcontractor in writing. Each Party shall limit access to Information
of the other Party to those of its subcontractors and personnel for
whom such access is reasonably necessary for the proper performance of
this Agreement and/or the Purchase
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO) 26(25)
Agreement. Such subcontractors and personnel shall be bound by written
confidentiality obligations not less restrictive than those provided
for in this Agreement.
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO) 27(25)
17.3 Duration of Confidentiality
The provisions of this Clause 17 shall bind the Parties for a period of
[*] years from the date of disclosure of any item of Information
regardless of any earlier termination, expiry or fulfillment of this
Agreement.
17.4 Conflicting Provisions
To the extent that the terms of a Non-Disclosure Agreement between the
Parties relating to the subject matter hereof conflict with the terms
of this Clause 17, this Clause 17 shall prevail over the terms of said
Non-Disclosure Agreement.
17.5 No Publicity
In the absence of prior written consent by the other Party, neither
Party shall make any publicity on, press release of or reference to
this Agreement, the other Party, Development or the co-operation
between the Parties, except to the extent required by law.
18 TERM AND TERMINATION
18.1 Term of the Agreement
This Agreement shall become effective upon the Effective Date and shall
apply retroactively also to all Development having been carried out
prior to the Effective Date. This Agreement shall continue to be
effective until either:
(i) Development has been fully carried out and Certificate(s) of
Final Acceptance have been issued by Nokia and the Parties
have, if so requested by Nokia, complied with Clauses 13.2 and
13.3 above; or
(ii) this Agreement has been terminated by either Nokia or
Developer pursuant to Clause 18.2 or 18.3 below or terminated
by Nokia pursuant to Clause 8.3 above.
18.2 Termination
This Agreement may be terminated by either Party with immediate effect
by sending a written notice of termination to the other Party, if said
other Party:
(i) becomes insolvent, is declared bankrupt or becomes the subject
of dissolution, liquidation (other than for the purpose of
reconstruction or amalgamation), receivership or bankruptcy
proceedings, whether voluntarily or involuntarily, or applies
for judicial or extra-judicial settlement with creditors,
makes an assignment for the benefit of creditors, or takes or
suffers any similar action in consequence of a debt or
otherwise discontinues its business relating to Development
and/or Product(s); and/or
(ii) is in breach of any of its material obligations under this
Agreement, which breach is not solely attributable to the
terminating Party and has failed to rectify such breach within
[*] days of having received written notice of such breach and
the intention of the terminating Party to terminate this
Agreement, if the breach is not rectified (or, if such breach
is not capable of being rectified within such time, if the
Party fails to commence to rectify such breach within such
time).
18.3 Termination by Nokia
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO) 28(25)
Notwithstanding the above, Nokia shall also have a right to terminate
this Agreement with immediate effect by sending a written notice of
termination to Developer, in case of:
(i) [*]; and/or
(ii) [*]; and/or
(iii) [*].
18.4 Termination and Payments
For the purposes of this Clause 18.4, "Payments" shall mean payments
for Development Fee, Deliverable Prices and any instalments thereof.
Any termination of this Agreement, for any reason, shall be without
prejudice to any rights or obligations which shall have accrued or
become due to either Party prior to the date of the termination.
Notwithstanding the above:
(i) In the event of Nokia terminating this Agreement based on
Clause 8.3 above or based on Clause 18.2, 18.3(i) or 18.3(ii),
Developer shall not, except with respect to any
then-outstanding unpaid invoices, be entitled to any
additional Payments or parts thereof from Nokia hereunder and
Nokia shall not, except with respect to any then-outstanding
unpaid invoices have any obligation to effect such additional
Payments or parts thereof; and
(ii) In the event of Developer terminating this Agreement based on
Clause 18.2 above or Nokia terminating this Agreement based on
Clause 18.3(iii) above Nokia shall not be relieved from its
obligation to effect Payments having accrued or become due
prior to the date of the termination.
18.5 Surviving Clauses
Any terms and conditions of this Agreement that by their nature or
otherwise reasonably should survive termination, cancellation or other
expiry of this Agreement shall survive any termination, cancellation or
other expiry of this Agreement. Such terms and conditions include but
are not limited to the terms and conditions set forth in Clauses 1.,
7.4, 10, 11, 12, 15, 17, 18.5, 19. and 20.
19 MISCELLANEOUS
19.1 Unless expressly otherwise agreed in this Agreement, neither Party
shall have the right to assign any of its rights or obligations under
this Agreement without the advance written consent of the other Party.
19.2 Unless otherwise agreed by the Parties in writing, neither Party will
have nor represent itself to have any authority to bind the other Party
or act on its behalf.
19.3 No failure to exercise, nor any delay in exercising, on the part of
either Party, any right or remedy hereunder shall operate as a waiver
thereof, nor shall any single or partial exercise of any right or
remedy prevent any further or other exercise thereof or the exercise of
any other right or remedy.
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO) 29(25)
19.4 In the event that any provision of this Agreement is held invalid as
contrary to any law, statute or regulation, the invalidity of such
provision shall in no way affect the validity of any other provision of
this Agreement and each and every provision of this Agreement shall be
severable from each and every other provision.
19.5 The headings and titles used in this Agreement are for convenience only
and are not part of this Agreement and do not in any way limit or
amplify any provisions of this Agreement.
19.6 The governing language of this Agreement and the correspondence between
the Parties shall be English.
19.7 The following persons shall act as the representatives of the Parties
regarding notices, performance, extension, termination and changes in
respect of this Agreement
Representing Nokia Corporation, Nokia Networks
Name: [*]
Address: Nokia Corporation, X.X. Xxx 000
XXX-00000 XXXXX GROUP
E-mail: [*]@xxxxx.xxx
Telephone: x000-00-000 [*]
Representing the Developer
Name: [*]
Address: 000 Xxxxxxx Xxxxxx,
Xxxxxxxxx, XX 00000 XXX
E-mail: [*]@xxxxxxx.xxx
Telephone: x0-000 000 [*]
Every notice and other communication made or delivered by one Party to
another hereunder shall be in the English language or accompanied by an
English translation.
19.8 This Agreement supersedes all prior agreements, arrangements,
proposals, representations or statements (whether oral, written or
implied from the conduct of the Parties), discussions, correspondence
and negotiations between the Parties in relation to the subject matter
of this Agreement with the exception of a possible non-disclosure
agreement which shall be subject to Clause 17. This Agreement shall
otherwise form the entire agreement and understanding between the
Parties with respect to the Development of Product(s).
In the event of any conflict between this Agreement and any of its
Appendices, the provisions of this Agreement shall prevail.
19.9 Any of the Appendices may be modified, altered, added or amended by a
written agreement or a written mutual confirmation between the Parties.
Such agreement shall usually be carried out by replacing the respective
Appendix with an updated version of the relevant Appendix signed by
both Parties.
Other modifications, alterations, additions or amendments to this
Agreement shall be valid only if signed by both Parties and expressly
indicated as an amendment to the Development Agreement.
20 APPLICABLE LAW AND DISPUTES
20.1 This Agreement shall be governed by and construed in accordance with
the laws of Switzerland, excluding its choice of laws provisions. The
Parties agree that the United Nations Convention on Contracts for the
International Sales of Goods (CISG) shall not apply to this Agreement.
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO) 30(25)
20.2 Any dispute, controversy or claim arising out of or relating to this
Agreement or the breach, termination or validity thereof shall be
finally settled in arbitration by three neutral arbitrators appointed
by the International Chamber of Commerce ("ICC"). The arbitration shall
be conducted
pursuant to the ICC's arbitration rules then in force. The arbitration
shall be conducted in Geneva, Switzerland, in the English language. The
award shall be final and binding on the Parties.
20.3 Any dispute, controversy or claim arising out of or relating to this
Agreement including but not limited to the possibility or existence of
the proceedings, the proceedings themselves, oral statements made
during the course of the proceedings, documents and other information
submitted by the Parties or prepared by the Court or the arbitrator(s)
and the final award shall be deemed Information under Clause 17 of this
Agreement.
20.4 Nothing in this Agreement shall be deemed to limit the Parties' rights
to seek interim injunctive relief or to enforce an arbitration award in
any court of law.
20.5 The Appendices mentioned above in the Table of Contents shall be an
integral part of this Agreement.
In witness whereof this Agreement has been duly signed and executed in two
original copies
NOKIA CORPORATION, NOKIA NETWORKS
By: /s/ [*]
Name: [*]
Title: Head of Cellular Transmission R & D
Date: August 14, 2003
ENDWAVE CORPORATION
By. /s/ [*]
Name: [*]
Title: VP of Sales
Date: August 14, 2003
APPENDIX 1 Product Definition incl. Specifications
APPENDIX 2 Milestone Schedule
APPENDIX 3 Project Plan
APPENDIX 4 Quality Requirements
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO) 31(25)
APPENDIX 5 Business Model incl. Pricing
APPENDIX 6 Mandatory Environmental Requirements
APPENDIX 7 Contact List
(C) Nokia Corporation
Proprietary and Confidential
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
NOKIA [*] DEVELOPMENT AGREEMENT
APPENDIX 1 - PRODUCT DEFINITION
NOKIA DEVELOPMENT CONTRACT - ESLNS03T733
UNCONTROLLED COPY
Except as may be otherwise provided by contract, this document or specification
is the proprietary and confidential property of EndWave Corporation. It is
issued in strict confidence and shall not be reproduced or copied or used
(partially or wholly) in any manner without prior, express written authorization
of EndWave Corporation.
DATE: 8/7/03
APPROVALS [*], VP, Account Sales
DATE: 8/7/03
[*], Director, Quality Assurance
DATE: 8/7/03
[*], VP, Product Development
DATE: 8/7/03
[*], Engineering Project Manager
DATE: 8/7/03
[*], Staff Design Engineer
REVISION HISTORY
REVISION ECN APPROVAL DATE
--------------------------------------------------------------------------------
01 5147
--------------------------------------------------------------------------------
02 5158
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
------------------------------------- ------------------------------------------
REVISION: 02 PART NUMBER: 120335-01
------------------------------------- ------------------------------------------
PAGE: 1 of 27
------------------------------------- ------------------------------------------
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
1.0 PURPOSE
The purpose of this document is to define and document the requirements
of Appendix 1 for the Development Agreement (DA) between Nokia Networks
and Endwave Corporation. This DA serves to develop a series of Microwave
Units (MWUs) for use in the Nokia [*] products at [*] GHz, [*] GHz, [*]
GHz, and [*] GHz. The [*]MWUs shall meet the class 2 level design
requirements as called out in Nokia's "[*] GHz Integrated Microwave Unit
Specifications", referenced below.
Appendix 1 defines the functionality of the MWU transceiver, the
components that make up the MWU, and the process technologies to be
used. The discussion will be broken into two parts covering the
millimeter wave section and the DC/IF printed circuit assembly.
2.0 REFERENCE DOCUMENTS
Document # Revision Title
133-004238_01 2.00a Nokia MWU Integration Test Plan
E10014774QE_E0 2.00a [*] GHz Integrated Microwave Unit
Specifications
3.0 ABBREVIATIONS
ALC Automatic Leveling Control
DA Driver Amplifier
DC Direct Current
EEPROM Electrically Erasable Programmable Read Only Memory
FET Field Effect Transistor
HBT Heterojunction Bipolar Transistor
HDR High Data Rate
HPA High Power Amplifier
IF Intermediate Frequency
IM Inter-Modulation
IRM Image Reject Mixer
LM Low Mode
LNA Low Noise Amplifier
LO Local Oscillator
LYRA
MM Medium Mode
MMIC Microwave Monolithic Integrated Circuit
MPA Medium Power Amplifier
MWU Millimeter Wave Unit
Rx Receive
SN Serial Number
------------------------------------- ------------------------------------------
REVISION: 02 PART NUMBER: 120335-01
------------------------------------- ------------------------------------------
PAGE: 2 of 27
------------------------------------- ------------------------------------------
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
Tx Transmit
VCO Voltage Controlled Oscillator
VVA Voltage Variable Attentuator
4.0 APPENDIX 1 - PRODUCT DEFINITION
4.1 MILLIMETER WAVE SECTION
Block diagrams of the millimeter wave section for each of the bands in
development are shown in Figures 1 though 3. The millimeter wave section
provides the following functionality:
1) An end frequency [*] consisting of a [*].
2) A receive section consisting of an [*].
3) A transmit section consisting of a [*].
The millimeter wave section utilizes [*] integrated with a [*]. The
MMICs are [*] on the brass through [*]. [*] is provided by [*] mounted
on the [*]. [*] is provided by [*] mounted on the [*]as [*]. [*] is
achieved with a [*] and via [*]. A [*] is used to make a [*] between the
[*]. The [*] are [*].
4.2 LO SECTION
Three [*] are to be used in the [*]. The designs will be fabricated
using [*]. One [*] will cover the [*], a [*] will cover the [*], and the
[*] and [*] will be covered with a [*]. The designs will employ a [*].
[*] employ [*] operating in the [*] at [*]. The fundamental [*] is at
[*] of [*], or [*]. At the [*], the fundamental [*], while the [*]. The
[*] will have a [*] where the [*] may be accessed.
------------------------------------- ------------------------------------------
REVISION: 02 PART NUMBER: 120335-01
------------------------------------- ------------------------------------------
PAGE: 3 of 27
------------------------------------- ------------------------------------------
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
Because the [*] is at the [*], with no additional [*], phase noise is
[*]. Typical [*] at [*] GHz will be better than [*]. At the [*], the
phase noise will be typically [*]. Typical phase noise for the [*] and
[*] will be better than [*].
Because of the [*], and the [*]achieved at the [*], a [*] are not
required in the [*]. [*] is expected at the [*]. The [*] provide the
necessary [*] to prevent [*] on the [*] and to keep the [*]. A [*] is
used instead of a [*] to improve [*]. The [*] also provides excellent
[*].
The [*] has the additional advantage of an [*]. This elimination of a
[*] should significantly reduce the possibility of [*].
4.3 RECEIVE SECTION
The receive section is comprised of an [*]. The [*] is necessary to
achieve [*]. An [*] follows the [*], and is located on the [*].
4.4 TRANSMIT SECTION
The transmit section starts with the [*]. The modulator is followed by
the [*]. The [*] includes an [*]. The output of the [*], which is used
to [*]the [*]. The [*] is also used to produce a [*]. The [*] is
positioned after the [*] to reduce the [*]. This is necessary to meet
[*].
The [*] includes the [*]. The WA's will be designed by[*], and are
constructed with [*]. The WA model numbers are TBD, and are therefore
labeled VVxxx in the block diagrams. Each [*]provides typically [*]. To
obtain sufficient [*] to cover the [*], [*]. They are labeled [*] in the
block diagrams. The [*]have been distributed to [*]. [*]. Because this
VVA has a [*], its [*] can be closely controlled. Attenuation here,
reduces [*]
------------------------------------- ------------------------------------------
REVISION: 02 PART NUMBER: 120335-01
------------------------------------- ------------------------------------------
PAGE: 4 of 27
------------------------------------- ------------------------------------------
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
of the [*]*], thus improving [*]. By maintaining the [*]VVA in the [*],
their [*]. The result is [*].
After VVA1 has [*], the [*]. The chain is designed so that when [*],
it's [*]. This is due to [*]. In this way, the [*] is controlled. As
[*]. The result is improved [*].
The [*] was chosen because it offers better [*] available. In some
cases, the [*] may be [*]. Often, [*] require two [*]. The [*] includes
an [*] at its [*] to enable [*].
Table 1 lists each of the MMICs used in the Millimeter Wave Section with
the corresponding process technology used. Current Budgets for each of
the bands are shown in tables 2 through 4. Frequency Plans for each of
the bands are listed in tables 5 through 8.
Transmit chain analysis' for each band are shown in Figure's 4 through
7. Nominal gains are assumed for all stages. [*]. The power levels are
assumed to be [*]. Because the [*] will adjust the [*] to maintain a
[*], the [*].
Chain Analysis' for the [*] are shown is Figure's 8 through
4.5 DCIIF PRINTED CIRCUIT ASSEMBLY
The DC/IF assembly provides the following functionality:
1) Mechanical/Electrical interface to customer for [*].
2) Non-volitile memory to contain: [*]
3) [*]
4) [*]
------------------------------------- ------------------------------------------
REVISION: 02 PART NUMBER: 120335-01
------------------------------------- ------------------------------------------
PAGE: 5 of 27
------------------------------------- ------------------------------------------
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
5) [*]
6) [*]
7) [*]
The DC/IF PCA is manufactured with a [*]. The [*] will be fabricated
using [*]. The PCB [*].
The incoming [*] are used directly to [*]. Voltage regulation of the
[*], for all of the millimeter wave MMICs. [*] is provided for the [*].
[*] is included for amplifiers requiring [*]. A [*] should the [*], or
in the event of a [*]. An [*] is used to add [*].
The [*] is compared against a [*] that is selectable for [*]. The [*] is
established by a [*]. The [*] is provided to the customer as [*]. The
[*] is [*]. This [*] functions to maintain a [*].
The [*] starts at the [*] and includes [*]. [*] is controlled by [*].
[*] is used to remove the [*] and to match the [*]. By matching the [*],
the [*] at the [*]. This reduces the [*]. The [*] is followed by the
[*]. These drivers have been designed to [*] as described above in the
[*]. [*].
Under [*], the [*] are driven to [*]. The [*] in the calibration table
is selected to provide a [*] for the [*] that allows the [*] to meet the
[*]. The [*] is proportional to the [*]. This difference [*].
Alternatively, the [*] could be adjusted to improve [*]. However, this
could [*]. The [*] stored in the [*] are chosen to satisfy the [*] and
to optimize the [*].
------------------------------------- ------------------------------------------
REVISION: 02 PART NUMBER: 120335-01
------------------------------------- ------------------------------------------
PAGE: 6 of 27
------------------------------------- ------------------------------------------
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
Figure 14 is a functional block diagram of the DC/IF circuitry with
I/O's.
4.6 MECHANICAL DESIGN
The mechanical processes for assembly shall be the same as those used on
the current production hardware. The electrical interface with the
customer is provided through [*]. The electrical interface between the
[*] is provided by [*]. The [*] are fastened together with screws. A
mechanical exploded view is provided in Figure 15.
5.0 SUMMARY
A compliance matrix has been generated against the class 2 requirements
of specification E10014774QE_E0. Based on the analysis' performed of the
[*], and [*], the Micro Wave Units to be developed by Endwave for the
[*] shall be capable of meeting all class 2 requirements with sufficient
margin for production manufacturing.
[*]
Figure 1 -[*] GHz Block Diagram
[*]
Figure 2 - [*] GHz Block Diagram
[*]
------------------------------------- ------------------------------------------
REVISION: 02 PART NUMBER: 120335-01
------------------------------------- ------------------------------------------
PAGE: 7 of 27
------------------------------------- ------------------------------------------
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
Figure 3 - [*] GHz Block Diagram
DEVICE [*] [*]
[*] X
[*] X
[*] X
[*] X
[*] X
[*] X
[*] X
[*] X
[*] X
[*] X
[*] X
[*] X
[*] X [*]
[*] X [*]
[*] X [*]
Table 1 - MMIC Technology
------------------------------------- ------------------------------------------
REVISION: 02 PART NUMBER: 120335-01
------------------------------------- ------------------------------------------
PAGE: 8 of 27
------------------------------------- ------------------------------------------
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[*]
MMIC MEDIAN CURRENT (MA)
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
Total [*]
Spec. [*]
Margin [*]
Table 2 - [*] GHz Current Budget
[*]
MMIC MEDIAN CURRENT (MA)
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
Total [*]
Spec. [*]
Margin [*]
Table 3 - [*] GHz Current Budget
------------------------------------- ------------------------------------------
REVISION: 02 PART NUMBER: 120335-01
------------------------------------- ------------------------------------------
PAGE: 9 of 27
------------------------------------- ------------------------------------------
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[*]
MMIC MEDIAN CURRENT (MA)
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
Total [*]
Spec. [*]
Margin [*]
Table 4 - [*] GHz Current Budget
------------------------------------- ------------------------------------------
REVISION: 02 PART NUMBER: 120335-01
------------------------------------- ------------------------------------------
PAGE: 10 of 27
------------------------------------- ------------------------------------------
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[*] GHz [*]Band Min Max [*]Band Min Max
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] GHz [*]Band Min Max [*]Band Min Max
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
Table 5 - [*] GHz Frequency Plan
REVISION: 02 PART NUMBER: 120335-01
PAGE: 11 of 27
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[*] GHz [*]Band Min Max [*]Band Min Max
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] GHz [*]Band Min Max [*]Band Min Max
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
Table 6 - [*] GHz Frequency Plan
REVISION: 02 PART NUMBER: 120335-01
PAGE: 12 of 27
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[*] GHz [*]Band Min Max [*]Band Min Max
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
Table 7 - [*] GHz Frequency Plan
[*] GHz [*]Band Min Max [*]Band Min Max
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
[*] [*] [*] [*] [*]
Table 8 - [*] GHz Frequency Plan
REVISION: 02 PART NUMBER: 120335-01
PAGE: 13 of 27
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
REVISION: 02 PART NUMBER: 120335-01
PAGE: 14 of 27
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
[*] GHz [*]Chain
[*]
Figure 4 - [*] GHz [*] Chain Analysis
REVISION: x11 PART NUMBER: 120335-01
PAGE: 15 of 27
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
[*] GHz [*]Chain
[*]
Figure 5 - [*] GHz [*] Chain Analysis
REVISION: x11 PART NUMBER: 120335-01
PAGE: 16 of 27
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
[*] GHz [*] Chain
[*]
Figure 6 - [*] GHz Tx Chain Analysis
[*] GHz [*] Chain
[*]
Figure 7 - [*] GHz [*] Chain Analysis
REVISION: x11 PART NUMBER: 120335-01
PAGE: 17 of 27
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
[*] GHz [*]
[*]
Figure 8 - [*] GHz [*] Chain Analysis
REVISION: x11 PART NUMBER: 120335-01
PAGE: 18 of 27
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
[*] GHz [*]
[*]
Figure 9 - [*] GHz [*] Chain Analysis
REVISION: x11 PART NUMBER: 120335-01
PAGE: 19 of 27
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
[*] GHz [*] Chain
[*]
Figure 10 - [*] GHz [*] Chain Analysis
REVISION: x11 PART NUMBER: 120335-01
PAGE: 20 of 27
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
[*]
REVISION: X11 PART NUMBER: 120335-01
PAGE: 21 of 27
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
[*] GHz [*] Chain
[*]
Figure 12 - [*] GHz [*] Chain Analysis
REVISION: X11 PART NUMBER: 120335-01
PAGE: 22 of 27
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
[*] GHz [*] Chain
[*]
Figure 13 - [*] GHz [*] Chain Analysis [*]
REVISION: X11 PART NUMBER: 120335-01
PAGE: 23 of 27
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
[*]
Figure 14 - DC/IF Printed Circuit Assembly Block Diagram
REVISION: X11 PART NUMBER: 120335-01
PAGE: 24 of 27
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
THIS FIGURE WILL BE ADDED ONCE THE DESIGN OF THE [*]MWU IS COMPLETED.
Figure 15 - Mechanical Exploded View
REVISION: X11 PART NUMBER: 120335-01
PAGE: 25 of 27
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
REVISION: X11 PART NUMBER: 120335-01
PAGE: 26 of 27
ENDWAVE CORPORATION PROPRIETARY AND CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
NOKIA [*]DEVELOPMENT AGREEMENT
APPENDIX 2 - MILESTONE SCHEDULE
NOKIA DEVELOPMENT CONTRACT - ESLNS03T733
UNCONTROLLED COPY
Except as may be otherwise provided by contract, this document or specification
is the proprietary and confidential property of EndWave Corporation. It is
issued in strict confidence and shall not be reproduced or copied or used
(partially or wholly) in any manner without prior, express written authorization
of EndWave Corporation.
APPROVALS [*], VP, Account Sales DATE: 8/7/03
[*], Director, Quality Assurance DATE: 8/7/03
[*], VP, Product Development DATE: 8/7/03
[*], Engineering Project Manager DATE: 8/7/03
REVISION HISTORY
REVISION ECN APPROVAL DATE
-------- --- -------- ----
01 5147
02 5158
REVISION: 02 PART NUMBER: 120336 - 01
PAGE: 1 OF 19
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
1.0 PURPOSE
The purpose of this document is to define and document the requirements of
Appendix 2 for the Development Agreement (DA) between Nokia Networks and
Endwave Corporation. This DA serves to develop a series of Microwave Units
(MWUs) for use in the Nokia [*] products at [*] GHz, [*] GHz, [*] GHz, and
[*] GHz. The [*]MWUs shall meet the class 2 level design requirements as
called out in Nokia's "[*] GHz Integrated Microwave Unit Specifications",
referenced below.
Appendix 2 provides a check list of the specific deliverables for each of
the product development phases for each band. Included with the identified
deliverables is a description of the deliverable, completion criteria, the
responsible party, due date for the deliverable, and the status to date.
2.0 REFERENCE DOCUMENTS
Document # Revision Title
---------- -------- -----
118646-01 Rev. 09 Full Scale Design and Development Control
118646-02 Rev. 03 Phase 1 Exit Criteria Checklist
118646-03 Rev. 00 Xxxxx 0X Xxxx Xxxxxxxx Checklist
118646-08 Rev. 03 Phase 2B Exit Criteria Checklist
118646-04 Rev. 04 Phase 3 Exit Criteria Checklist
118646-05 Rev. 03 Phase 4 Exit Criteria Checklist
118646-06 Rev. 01 Phase 5 Exit Criteria Checklist
118646-07 Rev. 03 Design Review Record
118646-09 Rev. 01 Development Process Modification Record
Rev. 3.2 Nokia Networks MW - Module Project APQP
Requirements
133-004238_01 2.00a Nokia MWU Integration Test Plan
E10014774QE_E0 2.00a [*] GHz Integrated Microwave Unit
Specifications
120424-01 Rev. 02 Endwave Corporation Project Schedule for
the [*]project
3.0 PROJECT SPECIFIC MILESTONE DELIVERABLES (MILESTONE SCHEDULE)
This section divides the deliverables for each band of the project into separate
deliverables by phase. These deliverables are derived from the Nokia APQP
requirements document. As well, the deliverables have been tailored such that
they provide the required information to allow the Endwave development process
to be followed in parallel.
REVISION: 02 PART NUMBER: 120336 - 01
PAGE: 2 OF 19
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
The Due Date for each deliverable represents the date for final completion
of the task. These dates are derived from the Endwave Corporation Project
Schedule 120424-01, [*]Project Schedule. In order to ensure deliverables
of analysis and test data are complete and in an expected format, these
type of deliverable will be provided [*] weeks prior to the Due Date. Of
the [*]week window, [*] weeks is for a Nokia to initially review material.
Then [*] weeks will be allotted for Endwave to incorporate any needed
changes mutually agreed to from the preliminary review.
REVISION: 02 PART NUMBER: 120336 - 01
PAGE: 3 OF 19
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
3.1 MILESTONE DELIVERY SCHEDULE
NO. DESCRIPTION DELIVERABLES COMPLETION CRITERIA RESPONSIBLE DUE DATE STATUS
--- ----------- ------------ ------------------- ----------- -------- ------
1 E1 milestone - Signed Development Agreement A signed off and agreed Nokia/Endwave [*]
- All appendices in support of to development agreement
the development agreement between Nokia and Endwave
2 [*]G PDR - Preliminary design review Deliverables are received Endwave [*]
package and approved by Nokia
- Preliminary design review report Action points completed
- Action point list
3 [*]G dfE - Preliminary environmental Deliverables are received Endwave [*]
requirement report and approved by Nokia
-Statement of Conformance to Action points completed
Nokia Substance List
-Nokia Material Data form
--- [*] GHZ ----------------------------------- --------------- ---------- -------- ------
4 [*] G E2 milestone - Updated Product Definition Deliverables are received Endwave [*]
- Design documentation package and approved by Nokia
(Combined E2 and E3 (Please see Project Plan for Action points completed
milestone. No more detail)
prototypes are build - Updated Project Plan, Milestone
in this development) Schedule and Risk Management
Plan
REVISION: 02 PART NUMBER: 120336 - 01
PAGE: 4 OF 19
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
NO. DESCRIPTION DELIVERABLES COMPLETION CRITERIA RESPONSIBLE DUE DATE STATUS
--- ----------- ------------ ------------------- ----------- -------- ------
- Reliability validation plan
-Derating requirements and
table of results
-Definition of FIT analysis
and calculation results
-Definition of Thermal
analysis and analysis
results
-Environmental test plan
-Reliability test plan
- Manufacturing plan
-Manufacturability
-Implementation plan
-Production process flow,
layout and machinery
-Flexibility and lead-times
-Ramp-up plan
-Production responsibles
- BOM
-All parts and materials
listed.
See project plan for more
detail
- Cost driver report
- Design validation (DV) plan
-MWU test plan
-Nokia MWU Integration test
plan
- Action point list
5 [*] G CDR - Critical design review package Deliverables are received Endwave [*]
- Critical design review report and approved
REVISION: 02 PART NUMBER: 120336 - 01
PAGE: 5 OF 19
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
NO. DESCRIPTION DELIVERABLES COMPLETION CRITERIA RESPONSIBLE DUE DATE STATUS
--- ----------- ------------ ------------------- ----------- -------- ------
- Action point list by Nokia
Action points completed
6 [*] G DV units - [*] pcs [*] G DV units Deliverables are received Endwave [*]
-[*] [*]band and approved by Nokia
-[*] l[*] band Action points are
- DV Test report (total [*] pcs) completed
-MWU test report Units tested and passed
-Integration test report DV test plan.
Units are fully spec
compliant
7 [*] G E4 milestone - Final Product Definition Deliverables are received Endwave [*]
- Final Design documentation and approved by Nokia
package Action points completed
- Process validation (PV) plan Full compliance to
-MWU test plan environmental requirements
-Nokia MWU Integration test
plan
- Processes under validation
- Process capability study
- Updated manufacturing plan
-Control plan
-Production recovery plan
-Forecasting/order procedure
- Final Environmental requirement
report
-Statement of Conformance to
Nokia Substance List
-Nokia Material Data form
- Updated risk management plan
REVISION: 02 PART NUMBER: 120336-01
PAGE 6 OF 19
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
NO. DESCRIPTION DELIVERABLES COMPLETION CRITERIA RESPONSIBLE DUE DATE STATUS
--- ----------- ------------ ------------------- ----------- -------- ------
- Cost driver report
8 [*] G PV units - [*] pcs [*] G PV units Deliverables are received Endwave [*]
-[*] [*]band and approved by Nokia
1st delivery -[*][*] band Action points are
- PV Test report completed
-MWU test report Units tested and passed
-Integration test report PV test plan.
Units are fully spec
compliant
9 [*] G PV units - [*] pcs [*] G PV units Deliverables are received Endwave [*]
-[*] [*]band and approved by Nokia
2ndt delivery -[*] [*]band Action points are
- PV Test report completed
-MWU test report Units tested and passed
-Integration test report PV test plan.
Units are fully spec
compliant
10 [*] G PV units - [*] pcs [*] G PV units Deliverables are received Endwave [*]
-[*] [*]band and approved by Nokia
3rd delivery -[*] [*]band Action points are
- PV Test report completed
-MWU test report Units tested and passed
- -Integration test report PV test plan.
Units are fully spec
compliant
REVISION: 02 PART NUMBER: 120336-01
PAGE 7 OF 19
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
NO. DESCRIPTION DELIVERABLES COMPLETION CRITERIA RESPONSIBLE DUE DATE STATUS
--- ----------- ------------ ------------------- ----------- -------- ------
11 [*] G E5 milestone - Updated Manufacturing plan Deliverables are received Endwave/Nokia [*]
-Updated control plan and approved by Nokia
-Manufacturing documentation Action points completed
package (Manufacturing Full compliance to
information) environmental requirements
- Updated Risk management plan
- Logistic model parameters
(Min/max values, stock implementation
plan)
- Cost driver report
- Action point list
--- [*] GHZ -------------------------------- --------------- ---------- -------- ------
12 [*] G E2 milestone - Updated Product Definition Deliverables are received Endwave [*]
- Design documentation package and approved by Nokia
(Please see Project Plan for more Action points completed
detail)
- Updated Project Plan, Milestone
Schedule and risk Management Plan
- Reliability validation plan
-Derating requirements and
table of results
-Definition of FIT analysis
and calculation results
-Definition of Thermal
analysis and analysis
results
- -Environmental test plan
REVISION: 02 PART NUMBER: 120336-01
PAGE 8 OF 19
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
NO. DESCRIPTION DELIVERABLES COMPLETION CRITERIA RESPONSIBLE DUE DATE STATUS
--- ----------- ------------ ------------------- ----------- -------- ------
-Reliability test plan
- Manufacturing plan
-Manufacturability
-Implementation plan
-Production process flow, layout
and machinery
-Flexibility and leadtimes
-Ramp-up plan
-Production responsibles
- BOM
-All parts and materials listed.
See project plan for more detail
- Cost driver report
- Design validation (DV) plan
-MWU test plan
-Nokia MWU Integration test plan
- Action point list
13 [*] G CDR - Critical design review package Deliverables are received Endwave [*]
- Critical design review report and approved by Nokia
- Action point list Action points completed
14 [*] G DV units - [*] pcs [*] G DV units Deliverables are received Endwave [*]
-[*] [*]band and approved by Nokia
-[*] [*]band Action points are
- DV Test report (total [*] pcs) completed Units tested
-MWU test report and
-Integration test report
REVISION: 02 PART NUMBER: 120336-01
PAGE 9 OF 19
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
NO. DESCRIPTION DELIVERABLES COMPLETION CRITERIA RESPONSIBLE DUE DATE STATUS
--- ----------- ------------ ------------------- ----------- -------- ------
passed DV test plan.
Units are fully spec
compliant
15 [*] G E4 milestone - Final Product Definition Deliverables are received Endwave [*]
- Final Design documentation and approved by Nokia
package Action points completed
- Process validation (PV) plan Full compliance to
-MWU test plan environmental requirements
-Nokia MWU Integration test
plan
- Processes under validation
- Updated Manufacturing plan
-Control plan
-Production recovery plan
Forecasting/order procedure
- Final Environmental requirement
report
-Statement of Conformance to
Nokia Substance List
-Nokia Material Data form
- Updated risk management plan
- Cost driver report
- Action point list
16 [*] G PV units - [*] pcs [*] G PV units Deliverables are received Endwave [*]
-[*] [*]band and approved by Nokia
1st delivery -[*] [*]band Action points are
- PV Test report completed Units tested
-MWU test report and passed PV test plan.
-Integration test report Units are fully spec
REVISION: 02 PART NUMBER: 120336-01
PAGE 10 OF 19
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
[ENDWAVE LOGO]
NO. DESCRIPTION DELIVERABLES COMPLETION CRITERIA RESPONSIBLE DUE DATE STATUS
--- ----------- ------------ ------------------- ----------- -------- ------
compliant
17 [*] G PV units - [*] pcs [*] G PV units Deliverables are received Endwave [*]
-[*] [*]band and approved by Nokia
2ndt delivery -[*] [*]band Action points are
- PV Test report completed Units tested
-MWU test report and passed PV test plan.
-Integration test report Units are fully spec
compliant
18 [*] G PV units - [*] pcs [*] G PV units Deliverables are received [*]
-[*] [*]band and approved by Nokia
3rd delivery -[*] [*]band Action points are
- PV Test report completed Units tested
-MWU test report and passed PV test plan.
-Integration test report Units are fully spec
complaint
19 [*] G E5 milestone - Updated Manufacturing plan Deliverables are received Endwave [*]
-Updated control plan and approved by Nokia
- -Manufacturing documentation Action points completed
package (Manufacturing Full compliance to
information) environmental requirements
- Updated Risk management plan
- Logistic model parameters
(Min/max values, stock
implementation plan)
- Cost driver report
REVISION: 02 PART NUMBER: 120336-01
PAGE 11 OF 19
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
NO. DESCRIPTION DELIVERABLES COMPLETION CRITERIA RESPONSIBLE DUE DATE STATUS
--- ----------- ------------ ------------------- ----------- -------- ------
- Action point list
--- [*] GHZ -------------------------- ----------- ------- ------- -------
20 [*] G E2 milestone - Updated Product Definition Deliverables are Endwave [*]
- Design documentation package received and approved
(Combined E2 and E3 (Please see Project Plan for more by Nokia
milestone. No detail) Action points
prototypes are - Updated Project Plan, Milestone completed
build in this Schedule and Risk Management
development) Plan
- Reliability validation plan
-Derating requirements and table of
results
-Definition of FIT analysis and
calculation results
-Definition of Thermal analysis and
analysis results
-Environmental test plan
-Reliability test plan
- Manufacturing Plan
-Manufacturability
-Implementation plan
-Production process flow, layout and
machinery
-Flexibility and leadtimes
-Ramb-up plan
-Production responsibles
- BOM
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120336-01
--------------------------------------------------------------------------------
PAGE 12 OF 19
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
NO. DESCRIPTION DELIVERABLES COMPLETION CRITERIA RESPONSIBLE DUE DATE STATUS
--- ----------- ------------ ------------------- ----------- -------- ------
-All parts and materials listed. See
project plan for more detail
- Cost driver report
- Design validation (DV) plan
-MWU test plan
-Nokia MWU Integration test plan
- Action point list
21 [*] G CDR - Critical design review package Deliverables are Endwave [*]
- Critical design review report received and approved
- Action point list by Nokia
Action points are
completed
22 [*] G DV units - [*] pcs [*] G DV units Deliverables are Endwave [*]
-[*] [*]band received and approved
-[*] [*]band by Nokia
- DV Test report (total [*] pcs) Action points are
-MWU test report completed
-Integration test report Units tested and
passed DV test plan.
Units are fully spec
complaint
23 [*] G E4 milestone - Final Product Definition Deliverables are Endwave [*]
- Final Design documentation received and approved
package by Nokia
- Process validation (PV) plan Action points are
-MWU test plan completed
-Nokia MWU Integration test plan Full compliance to
- Processes under validation environmental
- Process capability study
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120336-01
--------------------------------------------------------------------------------
PAGE 13 OF 19
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
NO. DESCRIPTION DELIVERABLES COMPLETION CRITERIA RESPONSIBLE DUE DATE STATUS
--- ----------- ------------ ------------------- ----------- -------- ------
- Updated Manufacturing plan requirements
-Control plan
-Production recovery plan
Forecasting/order procedure
- Final Environmental requirement
report
-Statement of Conformance to Nokia
Substance List
-Nokia Material Data form
- Updated risk management plan
- Cost driver report
- Action point list
24 [*] G PV units - [*] pcs [*] G PV units Deliverables are Endwave [*]
-[*] [*]band received and approved
1st delivery -[*] [*]band by Nokia
- PV Test report Action points are
-MWU test report completed
-Integration test report Units tested and
passed PV test plan.
Units are fully spec
compliant
25 [*] G PV units - [*] pcs [*] G PV units Deliverables are Endwave [*]
-[*] [*]band received and approved
2nd delivery -[*] [*]band by Nokia
- PV Test report Action points are
-MWU test report completed
-Integration test report Units tested and
passed PV test plan.
Units are fully spec
compliant
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120336-01
--------------------------------------------------------------------------------
PAGE 14 OF 19
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
NO. DESCRIPTION DELIVERABLES COMPLETION CRITERIA RESPONSIBLE DUE DATE STATUS
--- ----------- ------------ ------------------- ----------- -------- ------
26 [*] G PV units - [*] pcs [*] G PV units Deliverables are Endwave [*]
-[*] [*]band received and approved
3rd delivery -[*] [*]band by Nokia
- PV Test report Action points are
-MWU test report completed
-Integration test report Units tested and
passed PV test plan.
Units are fully spec
compliant
27 [*] G E5 milestone - Updated Manufacturing plan Deliverables are Endwave [*]
-Updated control plan received and approved
-Manufacturing documentation by Nokia
package (Manufacturing Action points are
information) completed
- Updated Risk management plan Full compliance to
Logistic model parameters environmental
(Min/max values, stock requirements
implementation plan)
- Cost driver report
- Action point list
--- [*] GHZ -------------------------- ----------- ------- ------- -------
27 [*] G E2 milestone - Updated Product Definition Deliverables are Endwave [*]
- Design documentation package received and approved
(Combined E2 and E3 (Please see Project Plan for more by Nokia
milestone. No detail) Action points
prototypes are - Updated Project Plan, Milestone completed
build in this Schedule and Risk Management
development)
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120336-01
--------------------------------------------------------------------------------
PAGE 15 OF 19
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
NO. DESCRIPTION DELIVERABLES COMPLETION CRITERIA RESPONSIBLE DUE DATE STATUS
--- ----------- ------------ ------------------- ----------- -------- ------
- Plan
- 9Reliability validation plan
-Derating requirements and table of
results
-Definition of FIT analysis and
calculation results
-Definition of Thermal analysis and
analysis results
-Environmental test plan
-Reliability test plan
- Manufacturing plan
-Manufacturability
-Implementation plan
-Production process flow, layout and
machinery
-Flexibility and leadtimes
-Ramp-up plan
-Production responsibles
- BOM
-All parts and materials listed. See
project plan for more detail
- Cost driver report
- Design validation (DV) plan
-MWU test plan
-Nokia MWU Integration test plan
- Action pint list
29 [*] G CDR - Critical design review package Deliverables are Endwave [*]
- Critical design review report received and approved
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120336-01
--------------------------------------------------------------------------------
PAGE 16 OF 19
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
NO. DESCRIPTION DELIVERABLES COMPLETION CRITERIA RESPONSIBLE DUE DATE STATUS
--- ----------- ------------ ------------------- ----------- -------- ------
- Action point list by Nokia
30 [*] G DV units - [*] pcs [*] G DV units Deliverables are Endwave [*]
-[*] [*]band received and approved
-[*] l[*] band by Nokia
- DV Test report (total 20 pcs) Action points are
-MWU test report completed
-Integration test report Units tested and
passed DV test plan.
Units are fully spec
compliant
31 [*] G E4 milestone - Final Product Definition Deliverables are Endwave [*]
- Final Design documentation package received and approved
- Process validation (PV) plan by Nokia
-MWU test plan Action points
-Nokia MWU Integration test plan completed
- Processes under validation Full compliance to
- Process capability study environmental
- Updated Manufacturing plan requirements
Control plan
-Production recovery plan
Forecasting/order procedure
- Final Environmental requirement
report
-Statement of Conformance to Nokia
Substance List
-Nokia Material Data form
- Updated risk management plan
- Cost driver report
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120336-01
--------------------------------------------------------------------------------
PAGE 17 OF 19
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
NO. DESCRIPTION DELIVERABLES COMPLETION CRITERIA RESPONSIBLE DUE DATE STATUS
--- ----------- ------------ ------------------- ----------- -------- ------
- Action point list
32 [*] G PV units - [*] pcs [*] G PV units Deliverables are Endwave [*]
-[*] [*]band received and approved
1st delivery -[*] [*]band by Nokia
- PV Test report Action points are
-MWU test report completed
-Integration test report Units tested and
passed DV test plan.
Units are fully spec
compliant
33 [*] G PV units - [*] pcs [*] G PV units Deliverables are Endwave [*]
-[*] [*]band received and approved
2nd delivery -[*] [*]band by Nokia
- PV Test report Action points are
-MWU test report completed
-Integration test report Units tested and
passed DV test plan.
Units are fully spec
compliant
34 [*] G PV units - [*] pcs [*] G PV units Deliverables are Endwave [*]
-[*] [*]band received and approved
3rd delivery -[*] l[*] band by Nokia
- PV Test report Action points are
-MWU test report completed
-Integration test report Units tested and
passed DV test plan.
Units are fully spec
compliant
35 [*] G E5 milestone - Updated Manufacturing plan Deliverables Endwave [*]
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120336-01
--------------------------------------------------------------------------------
PAGE 18 OF 19
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
NO. DESCRIPTION DELIVERABLES COMPLETION CRITERIA RESPONSIBLE DUE DATE STATUS
--- ----------- ------------ ------------------- ----------- -------- ------
-Updated control plan received and approved
-Manufacturing documentation by Nokia
package (Manufacturing information) Action points
- Updated Risk management plan completed
- Logistic model parameters
(Min/max values, stock
implementation plan)
- Cost driver report
- Action point list
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120336-01
--------------------------------------------------------------------------------
PAGE 19 OF 19
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
NOKIA [*]RISK PLAN
DATA AS OF 12 AUGUST 2003
1 Medium 0.84 NA [*] [*] 0.6 0.5 0.9 1.0 0.3 0.1 0.3 0.9 [*] [*] [*] [*] Open 12-Aug-03
3 Medium 0.84 NA [*] [*] 0.7 0.6 0.7 1.0 0.3 0.1 0.5 0.7 [*] [*] [*] [*] Open 12-Aug-03
2 Medium 0.83 NA [*] [*] 0.3 0.5 0.9 1.0 0.3 0.1 0.7 0.9 [*] [*] [*] [*] Open 12-Aug-03
8 Medium 0.82 NA [*] [*] 0.8 0.5 0.5 1.0 0.1 0.7 0.7 0.3 [*] [*] [*] [*] Open 12-Aug-03
120427-01r02a Page 1 of 3 8/13/2003
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
NOKIA [*]RISK PLAN
DATA AS OF 12 AUGUST 2003
10 Medium 0.82 NA [*] [*] 0.7 0.4 0.7 1.0 0.1 0.9 0.3 0.5 [*] [*] [*] [*] Open 12-Aug-03
11 Medium 0.82 NA [*] [*] 0.8 0.6 0.6 0.6 0.1 0.1 0.5 1.0 [*] [*] [*] [*] Open 12-Aug-03
4 Medium 0.82 NA [*] [*] 0.7 0.7 0.8 0.1 0.1 0.1 0.3 1.0 [*] [*] [*] [*] Open 12-Aug-03
9 Medium 0.82 NA [*] [*] 0.7 0.5 0.7 1.0 0.1 0.1 0.3 1.0 [*] [*] [*] [*] Open 12-Aug-03
7 Medium 0.77 NA [*] [*] 0.7 0.2 0.8 1.0 0.1 0.1 0.3 0.8 [*] [*] [*] [*] Open 12-Aug-03
120427-01r02a Page 2 of 3 8/13/2003
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
NOKIA [*]RISK PLAN
DATA AS OF 12 AUGUST 2003
5 Medium 0.71 NA [*] [*] 0.5 0.5 0.3 0.8 0.1 0.1 0.5 0.9 [*] [*] [*] [*] Open 12-Aug-03
6 Medium 0.66 NA [*] [*] 0.8 0.3 0.3 0.5 0.1 0.1 0.2 0.9 [*] [*] [*] [*] Open 12-Aug-03
120427-01r02a Page 3 of 3 8/13/2003
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
NOKIA [*]DEVELOPMENT AGREEMENT
APPENDIX 3 - PROJECT PLAN
NOKIA DEVELOPMENT CONTRACT - ESLN03T733
UNCONTROLLED COPY
Except as may be otherwise provided by contract, this document or
specification is the proprietary and confidential property of EndWave
Corporation. It is issued in strict confidence and shall not be
reproduced or copied or used (partially or wholly) in any manner without
prior, express written authorization of EndWave Corporation.
[*], VP, Account Sales DATE: 8/7/03
[*], Director, Quality Assurance DATE: 8/7/03
APPROVALS [*], VP, Product Development DATE: 8/7/03
[*], Engineering Project Manager DATE: 8/7/03
REVISION HISTORY
REVISION ECN APPROVAL DATE
-------- --- -------- ----
01 5147
01 5158
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------------------------------------------------
1 OF 16
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
1.0 PURPOSE
The purpose of this document is to define and document the requirements of
Appendix 3 for the Development Agreement (DA) between Nokia Networks and
Endwave Corporation. This DA serves to develop a series of Microwave Units
(MWUs) for use in the Nokia [*]and [*]products at [*] GHz, [*] GHz, [*]
GHz, and [*] GHz. The [*]MWUs shall meet the class 2 level design
requirements as called out in Nokia's "[*] GHz Integrated Microwave Unit
Specifications", referenced below.
The purpose of Appendix 3 is to define the Project Plan for the
development of the [*]MWUs by Endwave. This plan will be written to
fulfill the requirements of both Nokia Networks APQP and Endwave's Full
Scale Design and Development Control Procedure.
2.0 REFERENCE DOCUMENTS
Document # Revision Title
---------- -------- -----
118646-01 Rev. 09 Full Scale Design and Development Control Procedure
118646-02 Rev. 03 Phase I Exit Criteria Checklist
118646-03 Rev. 00 Xxxxx 0X Xxxx Xxxxxxxx Checklist
118646-08 Rev. 03 Phase 2B Exit Criteria Checklist
118646-04 Rev. 04 Phase 3 Exit Criteria Checklist
118646-05 Rev. 03 Phase 4 Exit Criteria Checklist
118646-06 Rev. 01 Phase 5 Exit Criteria Checklist
118646-07 Rev. 03 Design Review Record
118646-09 Rev. 01 Development Process Modification Record
Rev. 3.2 Nokia Networks MW - Module Project APQP Requirements
133-004238_01 2.00a Nokia MWU Integration Test Plan
E10014774QE_E0 2.00a [*] GHz Integrated Microwave Unit Specifications
120424-01 Rev. 02 Endwave Corporation Project Schedule for the [*]project
120427-01 Rev. 02 [*]Risk Analysis
3.0 APPENDIX 3 - PROJECT PLAN
3.1 PROJECT SCOPE
The objective of this project is to redesign the [*] currently produced by
Endwave to meet the performance requirements as defines in Nokia
specification E10014774QE_E0. [*] wave bands, [*], and [*] GHz, are to be
redesigned in this effort. The [*]MWUs shall meet the class 2 level design
requirements. Each design will be form factor compliant with the current
production MWU's. The project will include a software development effort
to support
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------------------------------------------------
2 OF 16
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
integration testing and qualification of the new MWU's in the [*]. Radio
testing will be done to a depth and level mutually agreed to during the
development effort.
The integration test software at Endwave shall meet the requirements of
Nokia MWU Integration Test Plan, document number 133-004238_00. Minor
modifications are planned to the production test sets to incorporate new
testing capability per the [*]specification. These changes will be defined
during the development effort.
The [*]MWU's shall be designed to conform with Nokia specific and new EU
environmental directive (ROHS, WEE) requirements defined in Appendix 6.
Implementation of all environmentally safe materials and processes shall
occur in phases, and will fulfill the requisite timetables. For example,
lead free PCB finish will be implemented in the initial design phase. Lead
free solder and components will be incorporated at some secondary phase.
Endwave does not expect the need to qualify any new processes for this
design. Any changes in processes for the product are processes either
Endwave or a subcontractor of Endwave has already qualified for use on
standard product designs. Therefore, the only testing required on a
new/changed process will be to ensure unit performance using the new
process.
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------------------------------------------------
3 OF 16
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
3.2 ORGANIZATION OF THE PROJECT
(FLOW CHART)
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------------------------------------------------
4 OF 16
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
3.3 PROJECT MANAGEMENT
3.3.1 PRODUCT DEVELOPMENT PROCESS
A gate process will be used for the development of the [*]product. This
process will follow both the Endwave Corporation Full Scale Design and
Development Control Procedure, 118846-01, and the Nokia Networks MW -
Module Project APQP Requirements. Both processes contain 6 steps for the
development and production launch of a new product. The table below list 6
typical steps to product development and how the phases Nokia's
development approach correlate to Endwave's approach.
Step Phase Name Nokia Phase Endwave Phase
---- ---------- ----------- -------------
1 Development Planning Phase 1 Phase 1
2 Engineering Design Xxxxx 0 Xxxxx 0X
3 Engineering Verification Phase 3 Phase 2B
4 Design Validation Phase 4 Phase 3
5 Production Validation Phase 5 Phase 4
6 Production Xxxx Xxxxx 0 Xxxxx 0
The scope and deliverables of each project phase is defined in the
respective process plan(s), greater clarification of each phase is
outlined later in this document. The following provides a high level
overview of scope for each phase as it pertains to the [*]development
project.
3.3.1.1 STEP I - DEVELOPMENT PLANNING / SUPPLIER QUALIFICATION
During this phase a development agreement will be generated. This
agreement will define how Nokia Networks and Endwave Corporation will work
together in the development of the [*]product as described in the Project
Scope section above. At the end of this phase both parties will mutually
agree on a contractual Development Agreement, Product Definition, Project
Plan, Project Milestone Deliverables, Quality Plan, Business Model,
Environmental Model, and Contact List.
3.3.1.2 STEP 2 - ENGINEERING DESIGN / MIN - MODULE ARCHITECTURE AND DESIGN
A development phase of the project where engineering design and analysis
is conducted with the goal of meeting the product performance
requirements. At the completion of this phase, a completed design of the
MWUs will be done to a level to build Design Validation units.
3.3.1.3 STEP 3 - ENGINEERING VERIFICATION / PROTOTYPE PHASE
Typically during this phase, prototype units are assembled and tested to
verify their performance against expected performance based on analysis.
On this project no prototype units will be assembled and tested. This
phase will not be performed and any pertinent deliverables will be moved
to another phase as detailed in later in this document and Appendix 2.
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------------------------------------------------
5 OF 16
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
3.3.1.4 STEP 4- DESIGN VALIDATION / DESIGN VALIDATION (DV)
During the design validation phase, [*] yielded units per band ([*]) will
be built and tested. These units will be put through varies test as
planned to validate their performance against the Nokia Specification. At
the completion of Integration Testing at Endwave. [*] of the units ([*])
will be delivered to Nokia for system testing at Nokia in the [*]system.
The project schedule/plan has allotted [2] weeks for the integration
testing at Endwave. As well, the project schedule/plan has allotted [*]
weeks for shipping, testing, analysis of the data, and responding to
Endwave acceptance of the design. The total number of DV units built
across the [*] bands will be [*] units, of which [*] units will be
delivered to Nokia. The table below indicate the ship timeline for the
delivery of the DV units.
3.3.1.5 STEP 5 - PRODUCTION VALIDATION / PROCESS VALIDATION
The PV phase will consist of a larger pre-production lot size and will
provide statistical yield analysis on all parameters to be measured in
production. Integration testing based on a mutually agreed to integration
test plan will also be included in this phase on a sample basis. [*] units
from each of the four bands ([*]) will be supplied to Nokia. The total
number of delivered PV units will be [*] each covering all [*] bands.
[*]
Name May Jun Jul Aug Sep Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
---- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Product Shipments
[*] GHz
Start DV Integration Test
DV ([*] units)
PV ([*] units)
Ship [*] Units
Ship [*] Units
Ship [*] Units
[*] GHz
Start DV Integration Test
DV ([*]units)
PV ([*] units)
Ship [*] Units
Ship [*] Units *
Ship [*] Units
[*] GHz
Start DV Integration Test
DV ([*] units)
PV ([*] units)
Ship [*] Units
Ship [*] Units
Ship [*] Units
[*] GHz
Start DV Integration Test
DV ([*] units)
PV ([*] units)
Ship [*] Units
Ship [*] Units
Ship [*] Units
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------------------------------------------------
6 OF 16
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
3.3.2 PROJECT REVIEWS
Monthly project reviews will be held throughout the development effort.
Endwave shall hold these monthly to review progress of technical, cost,
and schedule issues. A monthly report will also be delivered to Nokia via
e-mail using an agreed to format.
3.4 PROJECT DESIGN AND MILESTONE REVIEWS
During the development of the [*]product, design reviews will be held as
mutually agreed necessary. At a minimum a Preliminary Design Review and a
Critical Design Review shall be held for each band and an Exit Reviews by
band. The following shows dates for the mandatory design reviews and Exit
Gate Reviews.
[*]
Name May Jun Jul Aug Sep Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
---- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Design Reviews
[*] GHz
PDR
CDR
[*] GHz
PDR *
CDR
[*] GHz
PDR
CDR
[*] GHz
PDR
CDR
Preliminary & Critical Design Reviews
[*]
Name May Jun Jul Aug Sep Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
---- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
Gate/Milestones
[*] GHz
P1 Exit - E1
P2 Exit - X0
X0 Xxxx - X0
X0 Xxxx - X0
[*] GHz
P1 Exit - E1
P2 Exit - X0
X0 Xxxx - X0
X0 Xxxx - X0 *
[*] GHz
P1 Exit - E1
P2 Exit - X0
X0 Xxxx - X0
X0 Xxxx - X0
[*] XXx
X0 Xxxx - X0
X0 Xxxx - X0
X0 Exit - E4
P5 Exit - E5
Project Gate Reviews by Band
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------------------------------------------------
7 OF 16
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
3.5 PROJECT DELIVERABLES
Appendix 2 list the deliverables; in a check list format for the project,
their delivery dates, completion criteria, responsible party, due date,
and status. This section serves to better define those deliverables as
they apply to the HDR effort, the expected content, list assumptions when
appropriate, and clarify items that are not applicable to this development
effort. Some deliverables are delivered, and then delivered later in the
project as an update. For those updated deliverables that do not have
additional scope, the definition of the deliverable is defined for it's
first delivery with the same level on content to be delivered in
subsequent deliveries.
3.5.1 SUPPLIER QUALIFICATION & CONTRACTING - MILESTONE E1
3.5.1.1 DEVELOPMENT AGREEMENT
A development agreement will be generated and agreed to between Endwave
Corporation and Nokia Networks.
3.5.1.2 DEVELOPMENT AGREEMENT EXHIBITS
Several appendices will be generated in support of the DA. Below is a list
of these appendices to support the DA.
APPENDIX 1 Product definition including specifications
APPENDIX 2 Milestone schedule
APPENDIX 3 Project plan
APPENDIX 4 Quality requirements
APPENDIX 5 Business model
APPENDIX 6 Mandatory environmental requirements
APPENDIX 7 Contact list
3.5.2 MW MODULE ARCHITECTURE & DESIGN - MILESTONE E2
3.5.2.1 DESIGN DOCUMENTATION
Endwave will generate a documentation package as follows.
- A complete detailed drawing package of the MWU for review at
Endwave's facility.
- System level lineup analysis showing the anticipated performance of
the MWU and expected variations due to temperature and chip lot to
lot variations.
- Information on MMICs used to the level of a typical vendor data
sheet.
- An updated compliance matrix noting any non-compliant issues.
- FMEA may be performed on any areas of mutually agreed to concerns as
possible failure modes or quality issues.
RELIABILITY VALIDATION
FIT ANALYSIS
Endwave will generate a MTBF analysis for the MWU and deliver a report
showing the design meets specification for reliability.
The MTBF calculations for new [*]transceivers will be performed to the
requirements of Bellcore TR-332, with an environment [*], and a mounting
surface temperature of [*].
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------------------------------------------------
8 OF 16
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
Under this reliability study, the transceiver will consist of a [*] using
conventional [*] and a [*] and other [*] mounted on a [*]. Thermal
analysis for this assembly will assume [*].
The individual MMIC devices will be analyzed at [*] using a [*] based on
the total [*]. The resulting [*] for each chip will then be used to
calculate the [*] used for the [A*] entered in the [*].
3.5.2.2.2 THERMAL ANALYSIS
Endwave Corporation will provide a [*]values for all RF components.
Devices will be assumed to be operating at a maximum power load and at a
base plate temperature of [*]. Where available [*]will be arrived at using
the manufacturer's thermal conductivity coefficient and power dissipation.
Where no known thermal conductivity is known, a value based on [*]will be
used.
3.5.2.2.3 MECHANICAL QUALIFICATION TESTING
Endwave will perform extensive reliability and environmental tests in
order to fully qualify the [*]product. Reliability and Environmental plans
will be combined into one with the following specific tests to be
performed.
- Storage and Operation in high and low temperature cycling
environments. (Temperatures may range from [*])
- Non-Operation rapid thermal cycling between high and low
temperatures. (Temperatures may range from [*])
- Non-Operation vibration and thermal shock. (Combination of sine and
random profiles based on ETS standards)
- Combined Environmental test of rapid thermal cycling and vibration.
([*])
- Accelerated aging at [*] and for duration of no less than [*].
- Humidity testing will be performed per [*].
Test plans will include a detail description of test to be performed,
number of units tested under each environment, serial numbers of
transceivers tested, and acceptance criteria for each test.
Endwave believes by completing these test in conjunction with test to be
performed for electrical performance and unit integration test, all of the
environmental and reliability test requirements will be met.
3.5.2.2.4 FMEA
At this time no FMEA is will be performed on this effort. FMEA may be
performed on any areas of mutually agreed to concerns of possible failure
modes or quality issues. If the need for such an analysis be required then
it will be added to the project schedule.
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------------------------------------------------
9 OF 16
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
3.5.2.3 MANUFACTURING PLAN
A manufacturing plan will be generated for the [*]product. For this first
delivery the following will be included in the plan.
- Design manufacturability
- Design for testability (level of automation)
- Design for assembly (level of automation)
- Design flexibility (parts and material control between
variants)
- Yield targets
- Production line implementation plan (schedule)
- Preliminary production process flow
- Preliminary layout and machinery
- Production flexibility, lead time targets, etc. (module / component
level)
- Stock replenishment capability
3.5.2.3.1 PFMEA
At this time no PFMEA is will be performed on this effort. PFMEA may be
performed on any areas of mutually agreed to concerns of possible failure
modes or quality issues. If the need for such a analysis be required then
it will be added to the project schedule.
3.5.2.4 BOM
Endwave will provide for review at their facility a complete and detailed
BOM of the MWU. The BOM will highlight what components are determined to
be sole source, application/customer specific, long lead, quality risk,
low yield, or supplier risk.
3.5.2.5 COST DRIVER REPORT
Endwave is obligated to notify any changes in material costs (xxxx of
material) labor costs assembly/test cost and all other factors which have
an effect on the product pricing. These changes shall be reviewed if so
requested by either party.
3.5.2.6 RISK MANAGEMENT PLAN
Endwave will generate a risk management plan. This plan will define the
risk, assign a risk factor based on consequence and probability, the
trigger point, determine the impact to the project, and discuss a
mitigation plan.
3.5.2.7 PRELIMINARY DESIGN REVIEW
A Preliminary Design Review (PDR) will be held at Endwave's facility. This
PDR will cover the technical approach of all [*] bands and project plan at
that point in time.
3.5.2.8 DESIGN VALIDATION (DV) PLAN
The DV plan will be written in Phase 2 of the project and will be
delivered as part of the E2 deliverables. This plan will be based on a
test matrix describing the test to be performed, what number of units are
to be measured, and the parameters to be tested.
--------------------------------------------------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------------------------------------------------
10 OF 16
--------------------------------------------------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
3.5.3 DESIGN VALIDATION (DV) - E4 MILESTONE
3.5.3.1 DV UNITS DELIVERED
[*] units from each of the [*] bands ([*]) will be supplied to
Nokia as detailed in the project plan. Therefore the total number
of delivered DV units will be [*] each.
3.5.3.2 DV REPORT
A DV report will be provided with the following information.
- A product capability analysis report for each of the bands.
This report will contain the measured performance of
approximately [*] units and statistical analysis of the data.
- Data and or plots of unit performance over temperature.
Number of units per band is approximately [*] each ([*]).
- Plots and data from Integration Testing using the Nokia
Flexihopper test setup. This testing will include
qualification in [*].
- Mechanical Qualification Report If any new processes are
required, a Process Capability analysis will be generated as
part of this deliverable.
3.5.3.3 PROCESS VALIDATION (PV) PLAN
A PV plan will be written. This plan will be based on a test
compliance matrix describing the test required for PV. This matrix
will also cover the number of units to be measured, and the
parameters to be tested. As well as engineering test, some number
of units will be tested using the Integration Test Set developed
as part of this effort. Units will be tested for performance in
both [*] systems as mutually agreed too.
3.5.3.3.1 PROCESS CAPABILITY STUDY
A list of any and all new process(s) to Endwave will be provided
as well as a plan for qualification of identified new process(s).
3.5.3.4 MANUFACTURING PLAN
The manufacturing plan will be updated as need and the following
content will be added for the [*]development effort:
- Control Plan
o Including measures of critical parameters and features
- Production Recovery Plan (Nokia Supplier Requirement)
- Capacity / Ramp -up Schedule
- Forecasting / Order Procedure for Incoming Material
3.5.3.4.1 MANUFACTURING INFORMATION
At the completion of this gate, all pertinent information to
manufacture MWUs as mutually agreed will be stored on to a CD.
This information will be handled and stored as agreed to in the
Development Agreement.
3.5.3.5 SHIPPING PACKAGING EVALUATION AND APPROVAL BY NOKIA
Not applicable to this project due to similarity to the current
production [*] product. The packaging and marking of the product
will follow the same as used on the [*] today. Any slight
variations to the specifics to the printing on the labels will be
addressed as required through the weekly meetings.
--------------------------------------- ---------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------- ---------------------------------------
11 of 16
--------------------------------------- ---------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
3.5.3.6 ENVIRONMENTAL REQUIREMENTS
Information will be provided as required, in Nokia's format, in
order to meet environmental requirements. Please reference
Appendix 6 for more detail.
3.5.3.7 CRITICAL DESIGN REVIEW
Due to the fact the this Prototype Phase is not being performed,
the Critical Design Review will be held during the Design
Validation phase.
3.5.4 PROCESS VALIDATION (PV) - E5 MILESTONE
3.5.4.1 PV UNITS DELIVERED
[*] units from each of the [*] bands ([*]) will be supplied to
Nokia as detailed in the project plan. Therefore the total number
of delivered DV units will be [*] each for the entire HDR project.
3.5.4.2 PV REPORT
A PV report will be provided with the following information.
- A product capability analysis report for each of the bands. This
report will contain the measured performance of approximately [*]
units and statistical analysis of the data.
- Data and or plots of unit performance over temperature. Number of
units per band is [*].
- Plots and data from Integration Testing using the Nokia [*] test
setup. This testing will include qualification in [*] ODU systems.
- If any new processes to Endwave are required, a Process Capability
analysis will be generated as part of this deliverable.
3.5.4.3 NOKIA INBOUND LOGISTICS MODEL AGREED
Model parameters are agreed on.
--------------------------------------- ---------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------- ---------------------------------------
12 of 16
--------------------------------------- ---------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
3.6 PROJECT INTERFACES
In order to keep project flow smooth and continuous, the following
defined interfaces are being established. These interfaces are the
primary expected communication points; however, exchanges of
communication are not to be limited to the designated interface or only
to the following list.
ROLE / ENDWAVE CORPORATION NOKIA NETWORKS
RESPONSIBILITY NAME PHONE E-MAIL NAME PHONE E-MAIL
All Contractual [*] [*] [*] [*] [*] [*]
Discussions
[*]Program Contact [*] [*] [*] [*] [*] [*]
[*]Technical Interface [*] [*] [*] [*] [*] [*]
Integration Test Set [*] [*] [*] [*] [*] [*]
Contact
[*]Program Ramp [*] [*] [*] [*] [*] [*]
--------------------------------------- ---------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------- ---------------------------------------
13 of 16
--------------------------------------- ---------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
3.7 RESOURCE PLAN
3.7.1 PERSONNEL RESOURCE PLAN
A resource plan identifying key personnel required to support this
project has been generated. As part of defining the project team
as shown in the section, Organization of the Project, each
functional organization within Endwave was informed about the
scope and timeline of the [*]development effort. During monthly
Endwave internal project reviews, management of these various
organizations will be updated about current and future needs of
resources to support this project from kickoff to completion.
3.7.2 EQUIPMENT RESOURCE PLAN
With the recent completion of the Nokia Block II effort, and the
ongoing production of [*], no significant additional equipment
resources have been identified, except to support the upgrade of
the Integration Test station. This equipment has been identified
and budgeted for in the project budget.
3.8 XXXXX CHARTS
As a means to track the progress of the development effort, a
detailed project schedule has been generated in MS Project. A plot
of the schedule in Xxxxx Chart format will be provided as an
attachment to this document. This schedule will be updated
regularly as required per the Endwave Full Scale Design and
Development Process.
3.9 PROTOTYPE REVISION MATURITY AND TOTAL QUANTITY (PLAN)
Not applicable since no prototype units will be built for this
project.
3.10 CHIP LOTS AND REVISIONS USED
This section covers new MMICs for the [*]project and addresses
where they will come from in terms of lot and mask used. All
unchanged MMICs will be kitted from Endwave's stock room as a
standard part. [*] new MMICs are required across the [*] bands. In
the building of the Design Validation units and Process Validation
units, MMICs will be pulled from a collection of various
engineering lots and production lots. Chips from the engineering
lots will be fabricated on an engineering wafer mask. The
following provides the anticipated plan for use of new MMICs:
DESIGN VALIDATION BUILD:
[* ]GHz:
- PA MMIC, [*]- Engineering mask/lot
- VVA ([*] per MWU) MMIC, [*]-Engineering mask/lot
- VCO MMIC, [*]- Production parts / lot from [*]
[*] GHz:
- PA MMIC, [*]- Engineering mask/lot
- VVA ([*] per MWU), [*]MMIC -Engineering mask/lot
--------------------------------------- ---------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------- ---------------------------------------
14 of 16
--------------------------------------- ---------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
- MPA MMIC, [*]- Engineering mask/lot
- VCO MMIC, [*]- Production parts / lot from [*]
[*] GHz:
- PA MMIC, [*]- Engineering mask/lot
- VVA ([*] per MWU), [*]MMIC- Engineering mask/lot
- MPA MMIC, [*]- Engineering mask/lot
- VCO MMIC, 7 - Production parts / lot from [*]
[*] GHz:
- PA MMIC, [*]- Engineering mask/lot
- VVA ([*] per MWU) MMIC, [*]- Engineering mask/lot
- Driver ([*] per MWU) MMIC, [*]- Engineering mask/lot
- Driver, ([*] per MWU) MMIC, [*]- Screened production parts
lot from [*]
- VCO MMIC, [*]- Production parts / lot from [*]
PROCESS VALIDATION BUILD:
[*] GHz:
- PA MMIC, [*]- Production parts / lot(s) from [*]
- VVA ([*] per MWU) MMIC, - Production parts/ lot(s) from [*]
- VCO MMIC, - Production parts / lot from [*]
[*] GHz:
- PA MMIC, [*]- Production parts / lot(s) from [*]
- VVA ([*] per MWU), [*]MMIC -Production parts/ lot(s) from
[*]
- MPA MMIC, - Production parts / lot(s) from [*]
- VCO MMIC, - Production parts / lot from[*]
[*] GHz:
- PA MMIC, [*]- Production parts / lot(s) from [*]
- VVA ([*] per MWU), [*]-Production parts/ lot(s) from [*]
- MPA MMIC, [*]- Production parts / lot(s) from [*]
- VCO MMIC, [*]- Production parts / lot(s) from [*]
[*] GHz:
- PA MMIC, [*]- Production parts / lot from [*]
- VVA ([*] per MWU) MMIC, [*]- Production parts / lot(s) from
[*]
- Driver ([*] per MWU) MMIC, [*]- Production parts / lot(s)
from [*]
- Driver, ([*] per MWU) MMIC, [*]- Engineering mask/lot &
Production parts / lot(s) from [*]
- VCO MMIC, [*]- Production parts / lot from [*]
--------------------------------------- ---------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------- ---------------------------------------
15 of 16
--------------------------------------- ---------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
1(5)
Development Agreement No. [ESLN03T733] Confidential
Appendix [ 4 ]
Nokia Networks
3.11 PARTS AND MATERIALS USED
The design of the [*]product will be very similar to that of the
current production [*] product. The new design will [*] to brass using
an [*] on top for protection and [*]. A primarily [*]will attach to the
carrier assembly. The PCB will use [*] similar to that of the current
production product.
The [*] will change from the current [*] to a [*]. The [*] will be from
a make up from what is used at Endwave on other products already. At
the time of product launch, especially for the [*] & [*] GHz bands,
Endwave will use [*] and/or solder in the final design configuration.
3.12 MANUFACTURING PROCESS(ES) USED
No new manufacturing process to Endwave / [*] will be used in the
design of the [*] product. The new plating on the [*]PCB will be one
that has been used at Endwave for over 10 years. As well, Endwave is
considering a change of the material used for lamination of the[*].
Should this change occur, the material and process used will be one
that has already been fully developed and qualified at Endwave.
--------------------------------------- ---------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------- ---------------------------------------
1 of 16
--------------------------------------- ---------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(ENDWAVE LOGO)
DEVELOPMENT AGREEMENT RELATING TO
THE DEVELOPMENT OF [*] GHZ MWUS
NOKIA CORPORATION
(REPRESENTED THROUGH ITS NOKIA NETWORKS BUSINESS GROUP)
AND
ENDWAVE CORPORATION
APPENDIX 4. QUALITY REQUIREMENTS
Version Date Prepared By Modifications
A 28.1.2003 [*] First version
B 9.6.2003 [*] Chapter 6, 8
--------------------------------------- ---------------------------------------
REVISION: 02 PART NUMBER: 120337-01
--------------------------------------- ---------------------------------------
2 of 16
--------------------------------------- ---------------------------------------
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
3(5)
Development Agreement No. [ESLN03T733] Confidential
Appendix [ 4 ]
Nokia Networks
QUALITY REQUIREMENTS AND WORKMANSHIP STANDARDS
1. QUALITY SYSTEM REQUIREMENTS
Parts design development and planned manufacturing processes and their
development shall follow the guidelines of the Endwave Quality System,
which shall meet at a minimum, the applicable requirements of ISO 9001,
Nokia Supplier Requirements and Nokia specific requirements as set
forth in this appendix.
2. CHANGE MANAGEMENT
Endwave is not entitled to change the Specification(s) (incl. customer
specification(s), agreed upon internal specification(s) or the raw
materials used in the Deliverable(s), when they affect any form, fit or
function of the Part without a prior consent from Nokia.
Any such Engineering Change Request during the project after Design
Validation and/or Manufacturing Process Validation or any part thereof
shall be brought forward to the Nokia Project Manager. Any such
Engineering Change Request after the project final acceptance shall be
brought forward to the agreed upon contact at Nokia.
3. QUALITY PLANNING ACTIVITIES
A Project Plan shall be prepared for the design, prior to any major
design change, and manufacturing development/change activity. Any such
Project Plan shall be brought to Nokia's attention. The Project Plan
shall include all APQP requirements set forth by Nokia. [*].
Endwave shall ensure that all resources responsible for the Project
Plan activities are available during the project and that all activity
planning is in compliance with Nokia's targets. Endwave is responsible
for reviewing the Project Plan status on a regular basis and updating
it as necessary. Any deviation; from the plan shall be notified to
Nokia.
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
4(5)
Development Agreement No. [ESLN03T733] Confidential
Appendix [ 4 ]
Nokia Networks
4. CONTINUOUS QUALITY IMPROVEMENT
The target for service, design and product delivery shall be defect
free operations.
Endwave shall generate plans for achieving such targets. These plans
shall be available for Nokia review upon request.
Endwave shall continuously monitor the improvement targets to verify
the effectiveness of the improvement plans. Endwave shall be able to
demonstrate of verification of results.
5. CONTROL PLAN
All key process control parameters and key product characteristics
shall be documented in product and product line specific, incl.
subcontractor(s) Control Plans, which shall be available to Nokia upon
request. Endwave shall update these Control Plans to continuously
reflect the current manufacturing situation. The Control Plans shall
form one basis for targeting specific continuous quality improvements.
6. QUALITY INSPECTION
Endwave shall deliver defect free parts in accordance with the quality
requirements, guidelines and standards set forth in clause 8 of this
appendix. The LOCAL BUYER is entitled to perform incoming quality
inspection on the part(s) before they are received to the consigned
inventory and to return defected part(s) to Endwave.
The LOCAL BUYER is entitled to perform quality inspection on the
part(s) as they are taken from the consignment stock for production and
to return the part(s) to the Endwave if they are found defected.
If any defected part(s) is found in production at LOCAL BUYER the LOCAL
BUYER is entitled to exchange any such part for a good part from the
consignment stock at any time.
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
5(5)
Development Agreement No. [ESLN03T733] Confidential
Appendix [ 4 ]
Nokia Networks
7. QUALITY REPORTING
Endwave shall submit the following reports to Nokia on a continuous
basis or upon request:
REPORT / DOCUMENT FREQUENCY / DEADLINE
Control Plan (for each product and product TBD
line, incl. subcontractor
Returns/claims status and corrective TBD
action reports
8. PRODUCT SPECIFIC QUALITY REQUIREMENTS/QUALITY STANDARDS
Endwave shall meet product specific quality requirements and follow the
guidelines set forth in the following Nokia Quality Standards
NEMS: NOKIA ELECTRONICS & MECHANICAL STANDARDS (instructions and
standards for use in mechanical design and manufacture).
NESS: NOKIA ELECTRONICS STANDARDS & SPECIFICATIONS.
(instructions and standards that are to be adhered to when defining and
using materials and electronic components).
EAU/EAR:
(general Nokia standards relating to both electrical and mechanical
sub-contract assembly).
MIL (-STD): MILITARY STANDARD (US)
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
6(5)
Development Agreement No. [ESLN03T733] Confidential
Appendix [ 4 ]
Nokia Networks
APPLICATION
HIGH FREQUENCY TRANSCEIVERS:
MIL IPC
[*] [*]
[*] [*]
[*]
[*]
[*]
[*]
[*]
[*]
[*]
[*]
[*]
[*]
NEMS NESS EAU
[*] [*] [*]
[*]
[*]
[*]
[*]
[*]
[*]
Note 1: Notwithstanding the above, the use of [*].
9. DISCLAIMER
Neither the presence of Nokia's representatives nor any express or
implied acceptance of e.g. work, materials, components, equipment or
method of manufacture nor the fact that Nokia or its representatives
has not brought any defect or deficiency to the attention or Endwave or
his representatives shall relieve Endwave from its obligations under
this Appendix to perform according to and to meet all requirements set
out in the Agreement or prejudice any warranty to Nokia under the
Agreement.
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
1(3)
Development Agreement No. [ESLN03T733] Confidential
Appendix [ 5 ]
Nokia Networks
DEVELOPMENT AGREEMENT RELATING TO
THE DEVELOPMENT OF [*] GHZ MWUS
NOKIA CORPORATION
(REPRESENTED THROUGH ITS NOKIA NETWORKS BUSINESS GROUP)
AND
ENDWAVE CORPORATION
APPENDIX 5. BUSINESS MODEL
Version Date Prepared By Modifications
A 1.5.2003 [*] First version
B 9.6.2003 [*] Chapter 1, 3
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
2(3)
Development Agreement No. [ESLN03T733] Confidential
Appendix [ 5 ]
Nokia Networks
BUSINESS MODEL FOR DEVELOPMENT AND MANUFACTURING OF [*] GHZ MICROWAVE UNITS
1. DEVELOPMENT FEE
The development fee payments are in accordance to the agreed
Milestones.
[*] XXx X0 [*] USD
[*] XXx X0 [*] USD
[*] XXx X0 [*] USD
[*] XXx X0 [*] USD
[*] XXx X0 [*] USD
[*] XXx X0 [*] USD
[*] XXx X0 [*] USD
[*] XXx X0 [*] USD
2. [*] GHZ PRICES
DEVELOPMENT
Design Validation Units (DV) - [*] pcs per frequency band [*] USD/Unit
Production Validation Units (PV) - [*] pcs per frequency band [*] USD/Unit
Additional DV-Units shall be available for the price of [*] USD/Unit.
NOT TO EXCEED PRICES FOR CUMULATIVE ORDER VOLUMES ([*] GHZ)
[*] pcs [*] USD/Unit
[*] pcs [*] USD/Unit
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
3(3)
Development Agreement No. [ESLN03T733] Confidential
Appendix [ 4 ]
Nokia Networks
3. PRODUCT COST STRUCTURE
Endwave is obligated to notify any changes in
- material costs (xxxx of material)
- labour costs
- assembly/test cost
and all other factors which have an effect on the Product pricing.
These changes shall be reviewed if so requested by either Party.
4. MINIMUM DELIVERY CAPABILITY, REQUESTED ACCORDING TO THE FORECAST
AND ORDERING PROCEDURE, IS AS FOLLOWS ([*] GHZ COMBINED):
YEAR [*] [*] [*]
Volume > [*] > [*] > [*]
capability units/week units/week units/week
This Agreement constitutes [*] Product(s) from Developer. Developer
agrees, at Nokia's separate request, to sell Product(s) to Nokia in
accordance with the Purchase Agreement. Any and all purchases under
the Purchase Agreement are at all times [*].
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
1(7)
Development Agreement No. [ESLN03T733] Confidential
Appendix [ 6 ]
Nokia Networks
DEVELOPMENT AGREEMENT RELATING TO
THE DEVELOPMENT OF [*] GHZ MWUs
NOKIA CORPORATION
(REPRESENTED THROUGH ITS NOKIA NETWORKS BUSINESS GROUP)
AND
ENDWAVE CORPORATION
APPENDIX 6. MANDATORY ENVIRONMENTAL REQUIREMENTS FOR PRODUCTS
DELIVERED TO NOKIA NETWORKS (NET)
Version Date Prepared By Modifications
Revision A 1.5.2003 [*] First version
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
2(7)
Development Agreement No. [ESLN03T733] Confidential
Appendix [ 6 ]
Nokia Networks
TABLE OF CONTENTS
1. Purpose and scope..........................................................3
2. General....................................................................3
3. Requirements...............................................................4
3.1 Substances requirements.............................................4
3.1.1 Nokia Substance List...........................................4
3.1.2 Material content information...................................4
3.2 Solder requirements.................................................4
3.3 Requirement of providing information on substances used in Product..5
3.4 Requirement of symbol indicating need for separate collection.......5
3.5 Information on the Date of placing on the market....................5
3.6 Re-use and Recycling................................................5
3.7 Separate disassembly................................................5
3.8 Battery requirements................................................6
3.8.1 Substance requirement..........................................6
3.8.2 Marking and documentation......................................6
3.9 Transportation packaging requirement................................6
4. Exhibites..................................................................7
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
3(7)
Development Agreement No. [ESLN03T733] Confidential
Appendix [ 4 ]
Nokia Networks
1. PURPOSE AND SCOPE
This document describes the environmental requirements ("Environmental
Requirements") which are mandatory according to the agreed upon
schedule. These Environmental Requirements are applicable to any and
all products delivered to Nokia by supplier (the "Product").
2. GENERAL
Nokia Networks (NET) aims to minimise the environmental impacts of
communication networks by systematically considering environmental
issues in product design. The mandatory environmental requirements
described in this document are based on NET environmental goal areas
(e.g. environmentally relevant substances) and legislative
requirements.
3. SCHEDULE AND DELIVERABLES OF REQUIREMENTS
NO. TASK AND DELIVERABLES RESPONSIBLE DUE DATE
1 Delivery of information, no compliance is EW [*]
required
Delivery of "Statement of Conformance to
Nokia Substance List"
2 Delivery of information, no compliance is EW [*]
required.
Delivery of "Nokia Material Data form"
3 Full compliance to ROHS requirements EW [*]
Update and delivery of "Statement of
Conformance to Nokia Substance List"
Update and delivery of "Nokia Material Data
form"
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
4(7)
Development Agreement No. [ESLN03T733] Confidential
Appendix [ 4 ]
Nokia Networks
4. REQUIREMENTS
4.1 SUBSTANCES REQUIREMENTS
4.1.1 Nokia Substance List
All the products, parts and modules supplied to Nokia Networks shall be
compliant with the Nokia Substance List (EXHIBIT A). Please read the
cover letter carefully. Statement of Conformance to Nokia Substance
List (EXHIBIT D) is delivered to Nokia according to schedules given in
chapter 3.
References
- Proposal for a Directive of the European Parliament and
of the Council on the restriction of the use of certain
hazardous substances in electrical and electronic
equipment (RoHS)
- other Nokia requirements
4.1.2 Material content information
The supplier shall provide Nokia with [*]. Nokia Material Data Form is
delivered to Nokia according to schedules given in chapter 3.
When the Material Data Form is to be filled by a subcontractor of the
supplier, all Nokia-logos and other Nokia-references must be deleted
from the Material Data Form by the supplier prior to delivery of the
Material Data Form to such subcontractor.
References:
- Proposal for a Directive of the European Parliament and
of the Council on the restriction of the use of certain
hazardous substances in electrical and electronic
equipment (RoHS)
- Proposal for a Directive of the European Parliament and
of the Council on waste electrical and electronic
equipment (WEEE)
- Nokia Substance List
4.2 SOLDER REQUIREMENTS
Product shall in all respect be designed and manufactured to be
compliant with lead-free process by [*]. Please find below the NET
Leadfree Specification, which shall be used as a reference guideline,
and information slideset.
[ICON] [ICON]
NET_Leadfree_Spec. "Leadfree Update for
pdf Suppliers_160902.pd
Reference:
- Proposal for a Directive of the European Parliament and
of the Council on the restriction of the use of certain
hazardous substances in electrical and electronic
equipment (RoHS)
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
5(7)
Development Agreement No. [ESLN03T733] Confidential
Appendix [ 4 ]
Nokia Networks
4.3 REQUIREMENT OF PROVIDING INFORMATION ON SUBSTANCES USED IN PRODUCT
Environmentally relevant substances and the information of their
locations in the Product shall be stated in the product documents.
Environmentally relevant materials are defined in the Nokia Substance
List (please see chapter 3.1). Upon Nokia's request, but no sooner than
[*], Seller shall provide material declaration for Product using the
template in Exhibit C.
Reference:
- Proposal for a Directive of the European Parliament and of
the Council on waste electrical and electronic equipment
(WEEE)
- Nokia Substance List
4.4 REQUIREMENT OF SYMBOL INDICATING NEED FOR SEPARATE COLLECTION
[*]
4.5 INFORMATION ON THE DATE OF PLACING ON THE MARKET
[*]
4.6 RE-USE AND RECYCLING
[*].
4.7 SEPARATE DISASSEMBLY
As a minimum the substances, preparations and components defined in
Proposal for a Directive of the European Parliament and of the Council
on waste electrical and electronic equipment and adantment (WEEE),
Annex II, have to be removed from products in their end-of-life phase.
Thus, the removal of these substances, preparations and components
shall be enabled.
Reference:
- Proposal for a Directive of the European Parliament and
of the Council on waste electrical and electronic
equipment and adantment (WEEE)
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
6(7)
Development Agreement No. [ESLN03T733] Confidential
Appendix [ 4 ]
Nokia Networks
[*]
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
7(7)
Development Agreement No. [ESLN03T733] Confidential
Appendix [ 6 ]
Nokia Networks
5. EXHIBITS
EXHIBIT A) NOKIA SUBSTANCE LIST:
[LINK TO DOC "NOKIA SUBSTANCE LISV-3.XLS"]
EXHIBIT B) MATERIAL DATA FORM TEMPLATE PROVIDED BY NOKIA:
[LINK TO DOC MDFV5-01.XLS]
EXHIBIT C) MATERIAL DECLARATION TEMPLATE PROVIDED BY NOKIA:
[LINK TO DOC "MAT DECLARATION TEMPLATE.DOC"]
EXHIBIT D) STATEMENT OF CONFORMANCE TO NOKIA SUBSTANCE LIST:
[LINK TO DOC S-O-CONFORMANCE_NSLV3.0.XLS"]
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
1(2)
Development Agreement No. [ESLNS03T733] Confidential
Appendix [7]
Nokia Networks
DEVELOPMENT AGREEMENT RELATING TO
THE DEVELOPMENT OF [*] GHZ MWUS
BETWEEN
NOKIA CORPORATION
(REPRESENTED THROUGH ITS NOKIA NETWORKS BUSINESS GROUP)
AND
ENDWAVE CORPORATION
APPENDIX 7. CONTACT LIST
VERSION DATE PREPARED BY MODIFICATIONS
A 28.1.2003 [*] FIRST VERSION
B 23.5.2003 [*] [*]
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
2(2)
Development Agreement No. [ESLNS03T733] Confidential
Appendix [7]
Nokia Networks
CONTACT INFORMATION FOR [*] GHZ MICROWAVE UNIT PROJECT
CONTACT TITLE/RESPONSIBILITY PHONE E-MAIL
ENDWAVE
[*] [*] [*] [*]
[*] [*] [*] [*]
[*] [*] [*]
[*] [*]
[*] [*] [*] [*]
[*] [*] [*] [*]
[*] [*] [*] [*]
NOKIA
[*] [*] [*] [*]
[*] [*] [*] [*]
[*] [*] [*] [*]
[*] [*] [*] [*]
[*] [*] [*] [*]
[*] [*] [*] [*]
[*] [*] [*] [*]
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
1(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
[*] GHZ INTERGRATED MICROWAVE UNIT SPECIFICATIONS
Version Date Author Modified items/Remarks
0.01a 13.08.1997 [*] All frequency bands combined to 1 document, 0 (text), 1.1, 1.2, 1.3,
draft 1.4, 1.8, 1.9, 1.10, 1.16, 1.19.2, 1.24, 1.28, 2.1, 2.2,
2.3, 2.5, 2.7, 2.8, 2.9, 2.14.1, 2.15, 3.1, 3.2.6, 3.3,
3.3.5, 3.3.8, 3.3.8.1, 3.3.9, 4.1, 4.2 4.3, 4.5, 4.7, 4.10,
4.11, 4.12, 4.14, 4.15, 4.16, 5.6, 5.7, 6.2, 6.2.1, 6.2.2,
6.4, 6.9.5
0.01b 15.08.1997 [*] 0 (text, picture), 1.11, 1.12, 1.13, 1.14, 1.19.2, 2.1, 2.2, 2.3,
draft 2.4, 2.6, 2.12, 2.14.1, 3.2, 3.2.3, 3.2.6, 3.3, 3.3.8, 3.3.8.1,
4.1, 4.2, 4.9, 4.14, 4.15, 4.15.1, 4.15.2, 4.15.3, 5.6, 6.2, 6.4.2
0.01 18.08.1997 [*] 1.1, 3.2.3
0.02 01.09.1997 [*] Format of the document changed, 0 (text), 1.9, 1.9.1, 1.9.2,
1.29, 2.15, 3.3 (note), 3.3.8.1 (note), 3.3.9, 4.14, 4.15, 4.15.1, 4.15.2,
4.16, 4.17
0.03 03.09.1997 [*] 0 (text), 1.5 (note), 2.7, 2.8, 2.13, 2.14, 3.2.2, 3.2.6, 4.11,
4.12, 4.14, 6.4
0.04 22.10.1997 [*] 1.9.3 Note 1, 1.2.5, 1.26, 1.27, 2.2, 2.3, 2.12, 3.2.1, 5.2, 6.3,
6.4
0.05 07.11.1997 [*] 1.19.2 Note 2, 3.3.1, 5.2, 6.4.2, 6.8
0.06 12.11.1997 [*] 0, 1.29, 2.5, 2.9, 6.4.2, 6.9
0.07 26.11.1997 [*] 2.15, 4.13, 6.9
0.08 23.02.1998 [*] 3.2.3 note 2, 3.3.1, 3.3.8.1, 4.2.1, 6.9.5
0.09 25.02.1998 [*] 2.5, 2.6, 2.13, 2.14, 4.1, 4.2, 6.9.5
0.10 05.03.1998 [*] 4.2.1, 6.9.5
0.11 20.03.1998 [*] 1.1, 1.9.2 (note), 1.9.3 (note 2), 3.3.8 (note 3), 4.2.1
0.12 07.04.1998 [*] 1.9.2 (note), 1.25, 2.1, 2.9 (note), 2.13, 3.3.8 (note 3), 4.1
(note), 4.2 (note 2), 4.2.1 (note 1), 4.14, 4.15, 4.17
0.13 15.04.1998 [*] 4.1.1
0.14 21.04.1998 [*] 0, 1.1, 2.2, 4.1, 4.2
0.16 22.05.1998 [*] 0, 1.9.2 (note), 1.9.3, 1.25, 2.2, 3.2.2, 3.2.3, 4.5 (note added),
4.15.2, 4.17, 6.4 (note added)
0.17 01.07.1998 [*] 1.19.1, 3.2.3 (figure), 3.2.6 (note 1), 4.13.1, 5.6, 5.8 (note)
0.18 19.08.1998 [*] 2.5, 4.4.1, 4.8.1, 4.16.1, 4.17.1
0.19 18.09.1998 [*] 1.6, 2.11, 2.15, 3.3.4, 4.2.1, 4.13, 4.14
0.20 28.09.1998 [*] Abbreviation MWU changed to mw module, 0. (related documents list)
1.19.1, 1.23 (document number), 4.5 (note 2), 4.13.1
(document number), 6.2 (document number in note 1)
0.21 25.11.1998 [*] 0 (rel doc), 2.2.1, 2.5, 2.6, 2.9, 3.2.2, 3.2.3 (note 1 &
picture), 5.2, 6.2
0.22 01.02.1999 [*] 1.1 ([*]), 2.2.1 [*]), 4.13.1 [*]
--------------------------------------------------------------------------------
Prepared: Checked: Approved: Document Id:
[*] [*] [*] E10014774QE_E0
21.01.2003 21.01.2003
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 2(17)
NET/IMN/Kilo Site R&D Rev 5.2
Hans Somerma 08.10.2001 E10013984RE_C2
\\Esgroup001\Groups3\HDR\Projects\HW\MWU\Specifications\e10014774qed_e0.doc
--------------------------------------------------------------------------------
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
3(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
Version Date Author Modified items/Remarks
0.23 08.02.1999 [*] Document Id added, E10014774QE_00
0.24 09.02.1999 [*] 3.2.7 (Itx and Qtx polarity)
0.25 10.02.1999 [*] Header/footer updated
0.26 15.02.1999 [*] 0 (Related documents version)
0.27 17.03.1999 [*] 0 (Related documents version), 1.1 ([*]), 1.9.3 (physical
place of the note), 3.3.8 (wording of note 3), 4.5 (zero
setting clarified in note 2), 6.2 (wording of note), 6.4
(1.6 deleted, 2.11 updated).
0.28 16.04.1999 [*] 2.15 & 4.13 (antenna filter characteristics)
0.29 24.05.1999 [*] 5.6 (DET_CTRL1 & DET_CTRL2 pin allocation swapped)
0.30e 08.06.1999 [*] 1.5 (note added)
0.30 22.06.1999 [*] 2.2 (updated [*])
0.31 06.04.2000 [*] 6.4 ([*]
0.32 31.05.2000 [*] 0 (Related documents version), 1.9.1 from 10 ms to 5 ms,
NOT APPROVED
0.33 27.10.2000 [*] 1.1, 4.1, and 4.2 added for [*]GHz
0.34 05.12.2000 [*] Notes removed, 0 (Related documents, mechanical drawings), 1.1,
1.5.1, 1.11, 1.19.1, 1.23, 2.1, 2.2.1, 2.6.2, 2.7, 2.15, 3.3,
3.3.8, 4.1, 4.4.1, 4.8.1, 4.10, 4.11, 4.12, 4.13, 4.16.1, 4.17.1, 5.1.2,
5.3.2, 5.8, 6.2. Approved.
1.00 30.03.2001 [*] Version numbers added, 0 (Adding of classes, updating related
(D0) documents), 1.1, 1.5, 1.5.1, 1.16, 1.19.1, 1.19.2, 1.24, 1.29,
2.1, 2.1, 2.2.1, 2.3, 2.5, 2.6, 2.6.1, 2.12, 2.13, 2.14, 2.15, 3.1, 3.2.3,
3.3, 3.3.8, 4.1, 4.1.1, 4.2.1, 4.3, 4.9, 4.11, 4.13, 4.13.1, 5.1.1, 5.6, 5.7,
6.4, 6.5, 6.6., 6.7, 6.8. Approved.
1.01 20.11.2001 [*] 0 (Related documents version), 1.1, 1.5, 1.5.1, 1.16, 1.19.1, 1.19.2,
(D1) 1.24, 2.2, 2.2.1, 2.3, 2.5, 2.6, 2.6.1, 2.8, 2.9, 2.15, 3.1, 3.2.6, 4.1.1,
4.11, 4.13, 4.13.1, 5.1.2, 5.3.2, 5.6, 5.7, 6.4. Approved.
1.02 22.08.2002 [*] 0 (Related documents versions) 1.1 (added [*]GHz
(D2) modified), 1.11, 2.1, 3.3, 4.1.1, 4.2.1, 5.1.1, 5.2, 5.7, 5.8,
6.7 Approved
1.03d 20.12.2002 [*] 1.16, 4.2.1, 5.1 Changed, 5.1.3 added
(D3)
1.04d 17.01.2003 [*] 4.2.1 38 GHz class 2&3 changed
(D4)
2.00a 21.01.2003 [*] 4.14 changed, Approved
Approved 14 / 8 2003
------ ---
-------------------- ---------------------
Nokia Supplier
This specification describes the microwave module as an
integrated module.
--------------------------------------------------------------------------------
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
4(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
0. GENERAL
The microwave module consists of:
1) An [*] as needed.
2) An [*].
3) An [*].
4) [*].
5) [*].
6) [*].
7) [*].
8) The package for the whole microwave module.
9) Non-volatile memory to contain: [*]
The end frequency interfaces will be [*] and all other
interfaces will be [*].
The purpose of the divider chain is to [*].
Operation of microwave module must enable [*].
RELATED DOCUMENTS:
1) Non volatile memory contents E10013984RE_C2
2) Microphonics test setup E10013978QE_00
3) Maximum dimensions, drawings [*] GHz K10000636RE_A0
[*] GHz K10000416RE_A1
[*] GHz K10000410RE_B1
[*] GHz K10000409RE_B1
4) Environmental conditions and environmental tests for
telecommunication equipment. ETSI EN 300 019-2-4 V2.1.2 (1999-09)
5) Environmental conditions and environmental tests for
telecommunication equipment, transportation ETSI EN 300 019-2-2 V2.1.2 (1999-09)
--------------------------------------------------------------------------------
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
5(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
Below is one possible solution for the microwave module topology:
[*]
All connectors are "multipin connectors" as described in detailed
mechanical drawing. See Specification item 6.2
[*] as in the table below:
Frequency band WG-flange or Coaxial connector
[*] GHz [*]
[*] GHz [*]
[*] GHz [*]
[*] GHz [*]
[*] GHz TBD
A multipin connector will be used for
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
- [*]
--------------------------------------------------------------------------------
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
6(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
- [*]
- [*]
There shall be [*] of at least [*] on all the contact surfaces
of the connectors.
TBD (to be determined) means in this document that the
specification is not yet known and is under discussion.
Proposals from both sides will be taken into account but the
specification shall be agreed on based on mutual understanding
and shall be accepted by Nokia.
Must/goal statement means that the decision shall be made by
Milestone E2.
The supplier has to take into account [*]when verifying the
specifications. This applied mainly for TX output power. The
verified [*]shall be the reading of the [*].
The microwave modules can be divided into three classes
depending on intended use.
Class 1: Intended for use with [*].
Class 2: Intended for use with [*].
Class 3: High performance microwave module intended for use
with [*].
--------------------------------------------------------------------------------
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
7(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
1. OSCILLATOR RELATED ISSUES
1.1 Frequency bands
Frequency band TX carrier frequencies, MHz Duplex spacings
-------------- --------------------------- ---------------
[*] Band [*] Band
[*] GHz [*] [*] [*] MHz
[*] [*] [*] MHz
[*] [*] [*] MHz
[*] GHz [*] [*] [*] MHz
[*] [*] [*] MHz
[*] [*] [*] MHz
[*] GHz [*] [*] [*] MHz
[*] GHz [*] [*] [*] MHz
[*] [*] [*] MHz
[*] [*] [*] MHz
[*] [*] [*] MHz
[*] GHz [*] [*] [*] MHz
[*] [*] [*] MHz
[*] GHz [*] [*] [*] MHz
[*] [*] [*] MHz
[*] GHz [*] [*] [*] MHz
[*] GHz [*] [*] [*] MHz
[*] GHz [*] [*] [*] MHz
[*] GHz [*] [*] [*] MHz
[*] GHz [*] [*] [*] MHz
[*] GHz [*] [*] [*] MHz
These are transmitter "carrier" frequencies. In addition allowance for
modulation has to be made in the TX/RX amplifiers.
Class Allowance for modulation
----- ------------------------
1 & 2 [*] MHz
3 [*] MHz
In the case of several duplex spacings in one frequency band ([*] GHz,
[*] GHz, [*] GHz, [*] GHz, [*] GHz), one mw module should work with as
many duplex spacings as possible.
1.2 - 1.3 Deleted
1.4. Temperature stability
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 8(17)
NET/IMN/Kilo Site R&D Rev 5.2
Hans Somerma 08.10.2001 E10013984RE_C2
The temperature stability must be good enough to enable operation at
any frequency. See temperature range in specification item 6.4.
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
9(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
1.5 Pulling by:
muting (at end frequency): Class 1: [*] kHz, Goal [*] kHz
Class 2 and 3: [*] kHz
nominal [*] See figure 1 (specification item 1.5.1)
1.5.1 Crosstalk by nominal [*]to RX_IF
Class 1 and 2: DC...[*] MHz [*] dBc
Class 3: DC...[*] MHz [*] dBc
Pulling and crosstalk specification is ratio of spurious sideband
[*]level to IF level. It is measured from the [*] (specification 2.1).
Applied [*]are [*] between them.
[*]
1.6. - 1.7. Deleted
1.8. [*]
1.9. df/dU for each VCO at diveder output (TX_FDIV): for DC tuning
voltage enough to cover the band. The df/dU for DC voltage has to be
[*].
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
10(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
[*]
DC slope is [*]
AC slope is [*]
can be adjusted for different bands (even
individually if necessary)
1.9.1 Time constant R2C2 [*] ms
1.9.2 Input impedance Zin to the TX_TUNE port [*] k ohm
The phase angle of Zin must be [*] kHz (verification by analysis).
1.9.3. df/dU for each VCO at divider output (TX_FDIV) for AC tuning
voltage ([*]):
Frequency band, GHz Minimum %/V Maximum%/V
------------------- ----------- ----------
[*] [*] [*]
[*] [*] [*]
The AC tuning slope is specified here in units % of operating center
frequency fo per volt. This can be calculated from the final TX
frequency as well as from the TX_FDIV frequency.
1.10. Tuning voltage to varactor (TX_TUNE) Needed [*] V
Allowed [*] V
Needed range means normal operation and allowed range means voltage
that might be generated e.g. during startup. Allowed range is must not
harm the VCO or varactor and must not cause e.g. startup problems or
breakdown effects.
1.11. Maximum current of TX_TUNE [*]
1.12. - 1.14. Deleted
1.15. Tuning connector [*]
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
11(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
1.16. Phase noise (after multiplication),
Frequency band, GHz 10 kHz from 100 kHz from 1 MHz from 20 MHz from
carrier carrier carrier carrier
------------------- ----------- ------------ ---------- -----------
[*] Class 1 [*] dBc/Hz [*] dBc/Hz [*] dBc/Hz Not specified
[*] Class 1 [*] dBc/Hz [*] dBc/Hz [*] dBc/Hz Not specified
[*] Class 2 [*] dBc/Hz [*] dBc/Hz [*] dBc/Hz [*] dBc/Hz
[*] Class 2 [*] dBc/Hz [*] dBc/Hz [*] dBc/Hz [*] dBc/Hz
[*] Class 3 [*] dBc/Hz [*] dBc/Hz [*] dBc/Hz [*] dBc/Hz
[*] Class 3 [*] dBc/Hz [*] dBc/Hz [*] dBc/Hz [*] dBc/Hz
Noise floor of the VCO shall be low enough not to degrade the noise
performance of the downconverter due to any leakage in the module.
The specified points define the mask for the phasenoise. VCO phase
shall decrease outside the specified points.
1.17. - 1.18. Deleted
1.19. Spurious outputs around VCO-carrier signal
1.19.1. Ripple modulation in any power supply voltage ([*] kHz)
Class 1: [*]
Class 2: [*]
[*]
Class 3: [*]
[*]
1.19.2. Spurious signals
Frequency band, GHz Spurious frequencies Spurious level
------------------- -------------------- --------------
[*] GHz Class 1: [*] [*]
[*] GHz Class 2: [*] [*]
[*] GHz Class 3: [*] [*]
[*] GHz Class 1: [*] [*]
[*] GHz Class 2: [*] [*]
CW signals (spurious frequencies range in table above) of [*] are to be
fed to the power supply voltages during the measurements. [*] more near
the carrier.
1.20. - 1.22. Deleted
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
12(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
1.23. Microphonics
Nokia microphonics specification for the complete outdoor unit
is E10013978QE_00.
This item is tested by Nokia at system level. The VCO must
meet this system level specification tested and approved by
Nokia.
In case of significant changes in the mw module mechanical and
electrical construction, the effect of the modifications on
the system level microphonics performance must be verified and
approved by Nokia.
The supplier shall on a sample basis monitor that the
performance does not degrade.
1.24. Phase hits
VCO must meet the Nokia system level specification for
residual bit errors during temperature cycling. See
temperature cycling. See temperature ranging in specification
item 6.4.
Maximum frequency jump during cycling
Class 1: [*] kHz
Class 2 and 3: [*] kHz
This item is finally tested and approved by Nokia at system
level. Supplier must during development be able to show and
verify that basic design meets this specification.
Phase hits are sudden changes in the output signal that are
caused e.g. by bad contacts and thermal expansion or
mechanical stresses expiring.
1.25 Output power after frequency divider [*] dBm
1.26 Divider output nominal impedance [*] ohm
1.27 Divider output return loss [*] dB
1.28 Divider output frequency [*] GHz
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
13(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
1.29. Division ratio
Frequency band, GHz Possible division ratios; Transmit carrier
frequency / Divider output frequency
------------------- ------------------------------------------
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
The output matching can be negotiated. The design has to be able to
drive a PLL circuit (e.g. LMX 2330A).
SW will read the division ratio from the non-volatile memory.
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
14(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
2. LNA / IR MIXER RELATED ISSUES
2.1 RX_IF center frequencies
Frequency band, GHz RX_IF center frequency, MHz
------------------- ---------------------------
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
2.2 Spurious signals in RX_IF. Measured with no input to the receiver.
Class 1 and 2: [*] MHz [*] dBm
Class 3: [*] MHz [*] dBm
2.2.1 Spurious signals outside [*] (Class 3)
Frequency range: [*] GHz [*] dBm
2.3. RX_IF return loss [*] (Class 3))
Class 1 and 2 [*] dB
Class 3 [*] dB
2.4. RX_IF connector [*]
2.5. Total RX gain (frequency, temperature)
Frequency band, GHz RX gain, dB
------------------- -----------
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 15(17)
NET/IMN/Kilo Site R&D Rev 5.2
Hans Somerma 08.10.2001 E10013984RE_C2
[*] [*]
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
16(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
2.6. RF_in RF maximum level (<1 dB compression)
Class RF maximum level
----- ----------------
1 [*]
2 [*]
3 [*]
2.6.1. Third order intermodulation results for
Class 1 and 2 Not specified
Class 3 [*] [*]
Class 3 [*] [*]
Measured with a two-tone test, the individual sine wave tone levels are
[*] each.
2.6.2 Maximum input level to the RF_in (no damage) [*] dBm
2.7. Total RX gain variation [*] MHz [*] dB
2.8 Total RX group delay variation
Class 1 and 2 [*] MHz [*] ns
Class 3 [*] MHz [*] ns
2.9. Mw module total RX NF
Frequency band, GHz Mw module total RX NF, dB
------------------- -------------------------
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
The internal TX/RX isolation of the mw module must be good enough, so
that the transmitter does not degrade these numbers (wide band thermal
noise components). The needed isolation depends on the chosen topology
and can be [*] dB.
2.10. Image frequency rejection without diplexer [*] dB
2.11. RX return loss [*] dB
2.12. Gain stability over frequency [*] dB
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 17(17)
NET/IMN/Kilo Site R&D Rev 5.2
Hans Somerma 08.10.2001 E10013984RE_C2
2.13 Gain stability over temperature (vs. T = 25(degree)C) [*] dB
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
18(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
2.14. total gain stability, (frequency and temperature) [*] dB
This should be as good as possible to allow good accuracy in
determining input level based on measurement at IF.
2.14.1 RX stability bandwidth [*]
2.15 CW signal spurious mixing conversion gain to [*], relative to the
main signal.
Frequency range Relative conversion gain of the mw module
--------------- -----------------------------------------
[*] GHz [*] GHz [*] GHz [*] GHz
[*] [*] dB [*] dB [*] dB [*] dB
[*] [*] dB [*] dB [*] dB [*] dB
[*] [*] dB [*] dB [*] dB [*] dB
[*] [*] dB [*] dB [*] dB [*] dB
[*] [*] dB [*] dB [*] dB [*] dB
[*] [*] dB [*] dB [*] dB [*] dB
[*] [*] dB [*] dB [*] dB [*] dB
[*] [*] dB [*] dB [*] dB [*] dB
[*] can any frequency in the list in item 1.1 (either [*]depending on
the mw module) and is the actual LO frequency of the mw module during
the measurement. The sign (+ or -) in [*] is selected so that it gives
the actual receiver frequency according to the list in item 1.1.
Frequency [*].
The input level of the CW signal is [*] dBm.
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
19(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
3. TX MODULATOR RELATED
3.1 Transmitter subbands As in specification item 1.1 plus [*]
MHz (Class 1 and 2), [*] MHz
(Class 3) allowance for modulation
3.2 [*]:
3.2.1 Impedance (must be DC-coupled), nominal [*] ohm [*] ohm
3.2.2 Return loss to a [*] ohm reference, [*] MHz [*] dB
3.2.3 Input level, nominal [*] mYpp
[*]. Source impedance is [*]. If the return loss of the mw module
changes, the input level at the interface will change accordingly from
the nominal value [*]to approximately [*].
[*].
Class 2 and 3: The level may also change [*] dB [*]. When using [*]the
reference level is kept constant and [*]. This increases the maximum
[*]to [*] mYpp.
[*]
3.2.4 Mixer [*] [*] dB
3.2.5 Mixer [*] [*] degr
3.2.6 Needed [*]. [*] mA
Maximum allowed [*]. [*] mA
The specifications 3.2.4 and 3.2.5 shall be fulfilled in the biased
operating condition. In biased operating condition, [*]is as specified
in item 4.13.1.
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
20(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
3.2.7 [*].
[*]
3.3 ENV_MEAS ([*]) logic levels
CMOS Low [*] V
High [*] V
Maximum voltage allowed [*] V
The [*] is needed to feed the information about the [*]. The average
[*] at the [*] is assumed to be constant. In the [*] the difference
between the [*] is about [*] dB. In the [*] the difference between [*]
is [*] dB[*]. (See the figure in spec item 3.3.8)
The signal shall be well below compression all the way to the point
where [*]measurement occurs.
3.3.1 ENV_MEAS polarity with a [*] [*]
3.3.2 Deleted
3.3.3 Deleted
3.3.4 Open loop frequency response, [*] MHz
maximum value of the response vs. DC value [*] dB
minimum value of the response vs. DC value [*] dB
Care must be taken not to introduce extra delay and delay variation
[*].
3.3.5 - 3.3.7 Deleted
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
21(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
3.3.8 MPA_CTRL input
[*] V
Maximum current available [*] mA
This is based on the [*] to have a [*]. [*] will be [*] and [*] at [*].
The [*] refer to the [*]. In the [*] (see also specification item 5.7)
the [*]. In the [*] the [*].
[*]
Figure: [*].
[*]: The [*] it [*] dB [*]. The [*] is [*] dB [*]. Because there
is an [*] is [*] dB [*]. [*]: The [*] level is [*] dB [*]
level.[*].
The [*] must not [*] during specified operating conditions and the [*].
3.3.8.1 Polarity of MPA_CTRL
when [*]
when [*]
3.3.9 MPA-CTRL slope [*] dBN
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
22(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
4. POWER AMPLIFIER RELATED
4.1. TX output power,
Frequency band, GHz Output power, electrical
control range [*]
------------------- ------------------------
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] TBD
4.1.1 Noise power level at TX output
[*] GHz [*]
[*]
[*]
[*]: [*]
[*] GHz [*]
[*]
[*]
[*]: [*]
[*] GHz [*]
[*]
[*]
[*]: [*]
[*] GHz [*]
[*]
[*]
[*]: [*]
This is at frequencies of [*].
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
23(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
4.2 Output power 1 dB compression point after ms/WG transition
Frequency band, GHz P1dB, dBm
------------------- ---------
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] TBD
[*] TBD
This is for the whole mw module transmit chain. The [*] must not in any
condition [*].
4.2.1 Output third order intermodulation level, IM;
Class l:
Band TX output power/dBm IM3 Other Intermodulation levels
---- ------------------- --- ----------------------------
[*] [*] [*] dBc [*] dBc
[*] [*] [*] dBc [*] dBc
[*] [*] [*] dBc [*] dBc
[*] [*] [*] dBc [*] dBc
Class 2 and 3:
Band TX output power/dBm IM3 IM5 +higher 1M7 +higher
---- ------------------- --- ----------- -----------
[*] [*] [*] dBc [*] dBc [*] dBc
[*] dBc [*] dBc [*] dBc
[*] [*] [*] dBc [*] dBc [*] dBc
[*] dBc [*] dBc [*] dBc
[*] [*] [*] dBc [*] dBc [*] dBc
[*] dBc [*] dBc [*] dBc
[*] [*] [*] dBc [*] dBc [*] dBc
[*] dBc [*] dBc [*] dBc
[*] [*] [*] dBc [*] dBc [*] dBc
[*] dBc [*] dBc [*] dBc
The two-tone measurement is done as a single-side-band (SSB)
measurement. Specification shall be fulfilled at any two-tone
separation less than [*] MHz . Two tones (typically [*] MHz separation)
are [*] [*] dB below the nominal level. [*]shall be [*]. LO leakage has
to be [*] dBc. [*]is [*].
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 24(17)
NET/IMN/Kilo Site R&D Rev 5.2
Hans Somerma 08.10.2001 E10013984RE_C2
IM5 +higher means intermodulation levels excluding IM3. IM7 +higher
mans intermodulation levels excluding IM3 and IM5. These should be
measured in the same way as the IM3 specification. The ratios
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
25(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
specify [*] where Po is the power of the two main tones and IM5 and
PIM7 are the in-phase sum of all the above mentioned intermodulation
products.
4.3 TX output power when MUTE "on" Must [*] dBm
Goal for [*] GHz bands [*] dBm
4.4 TX-MUTE on/off control, "mute off, power on" [*] V
"mute on, power off" [*] V
[*]
4.4.1 Maximum current of TX-MUTE control, [*] mA
4.5 TX-MUTE on/off speed
Mute on to off (Pout within [*]dB) [*] ms
Mute off to on [*] ms
During a transient from 'MUTE on' to 'MUTE off or vice versa, the TX
output power is allowed to overshoot the steady state TX output power
(set by TX_PWR, DET_CTRLI and DET_CtR1.2) only by [*] dB.
The software will set TX_PWR and the control bits first to zero during
muting (within [*] ps). When the power will again be switched on, the
sequence is: [*]. This will also take place in [*] ps.
4.6 TX return loss [*] dB
4.7 TX output power electronic control range Minimum [*] dB
Goal [*] dB
4.8. Electronic attenuator control voltage TX_PWR (refer to picture in
paragraph 0).
Voltage range (to high impedance, [*] kohm) [*] V
Polarity: Increasing TX_PWR will cause increasing output power.
The control has an [*]resolution.
4.8.1 Maximum current of TX_PWR [*] mA
4.9. Transmit power stability ([*]
Variation over temperature [*] OdB
Variation over frequency [*] OdB
[*] GHz Class 3 total variation over frequency
and temperature [*] dB
Transmit power is controlled by TX_PWR in [*] dB steps. This
specification applies for all power levels. The curve is individually
[*]of the subband.
4.10. Transmit power stability bandwidth
[*]
[*] GHz [*] MHz
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
26(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
4.11. Total TX gain variation
Class Frequency TX 'n variation
----- --------- ---------------
1 and 2 [*] MHz [*] dB
[*] MHz [*] dB (goal)
3 [*] MHz [*] dB
[*] MHz [*] dB
TX gain variation covers the whole TX chain [*]to waveguide output.
During the measurement the LO must be at least [*] dB below the wanted
signal. [*]must be controlled manually during the measurement. [*]ports
should be measured separately.
4.12. Total TX group delay variation [*] MHz [*] ns
TX group delay variation covers the whole TX chain [*]to waveguide
output.
4.13 Spurious emissions after ms/wg-transition. Allowed level is as
mentioned below as well as antenna filter attenuation
characteristics.
Spurious emissions of other frequencies
after the antenna diplexer (any 1 MHz
bandwidth):
[*] GHz [*] dBm
[*] GHz [*] dBm
Antenna filter attenuation characteristics:
Frequency range [*] GHz [*] GHz [*] GHz [*] GHz
[*] [*] dB [*] dB [*] dB [*] dB
[*] [*] dB [*] dB [*] dB [*] dB
[*] [*] dB [*] dB [*] dB [*] dB
[*] [*] dB [*] dB [*] dB [*] dB
[*] [*]dB [*] dB [*] dB [*] dB
[*] [*]dB [*] dB [*] dB [*] dB
[*] [*] dB [*] dB [*] dB [*] dB
[*] [*] dB [*] dB [*] dB [*] dB
f(tx,mean) means the mean value of TX frequencies as given in
specification item 1.1.
f(tx,low) means the lowest and highest TX frequency in the same list,
respectively. The abbreviation f(d) means duplex-spacing as given in
specification item 1.1.
4.13.1 LO leakage Class 1 and 2: All output power levels [*] dBc
Class 3: TX output power levels above
[*] dBm [*] dBc
The LO leakage cancellation is based on the closed loop control by
ENV_MEAS signal coning the Itx and Qtx biasings. The internal isolation
of the mw module from LO to PA inside the module must not degrade the
LO leakage to be worse than [*] dBc at the mw module output.
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
27(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
4.14 Power levelling loop signal TX_PWR
This signal is used for output power level adjustment
4.14.1 Speed of the transmit power levelling loop Minimum [*] ms
Maximum [*] ms
Prescale bits and TX_PWR signal may have [*] ps timing difference.
4.14.2 Rise time (10 % to 90 % level) for TX_PWR signal [*] ps
This may not cause [*] over/undershoot in TX power.
4.15. BS_DET signal (= buffered power amplifier attenuator control
voltage)
This voltage is used to give an alarm (limits exceeded) if the loop is
not working correctly.
4.15.1 BS_DET signal voltage total range [*] V
4.15.2 BS_DET signal voltage alarm limits (high and low limits) are to
be given and stored to the non-volatile memory.
4.15.3 BS_DET signal output load [*] ohms
4.16. [*]voltage CMOS [*]V
[*] V
Frequency [*] kHz
4.16.1 Maximum current of [*] [*] mA
4.17. TX output power control
DET_CTRL1 DET CTRL2
--------- ---------
1 1 High output power voltage [*] V
1 0 voltage [*] V
0 1 Low output power
4.17.1 Maximum current of DET_CTRLl and DET_CTRL2 signals [*] mA
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
28(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
5. BIAS AND TEMPERATURE CONTROL BOARD
5.1.1. Positive supply voltage [*] V
5.1.2. Ripple voltage at [*] kHz [*] mVpp
fast transients [*] mVpp
all together [*] mVpp
5.1.3 Minimum voltage available with different current consumptions
Current [*] Voltage[*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
5.2. Positive supply current, continuous [*] A
- [*]
5.3.1. Negative supply voltage [*] V
5.3.2. Ripple voltage at [*] kHz [*] mVpp
fast transients [*] mvpp
all together [*] mVpp
5.3.3. Deleted 5.4. Negative supply current [*] mA
5.6 Pin allocation::
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
29(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
Signal Abbreviation Pin
------ ------------ ---
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
[*] [*] [*]
(See specification item 5.7)
[*] [*] [*]
[*] [*] [*]
5.7 [*]identification pin (signal provided by system)
[*]case high [*] V
[*]case ground or low [*] V
Maximum current available [*] mA
5.8. .Non-volatile memory Pin Level
Baseline chip [*] [*] V
AT [*] (ATMEL) [*] V
[*] [*] V
[*] V
[*] [*] V
[*] V
[*] [*] V
[*] V
The signaling directions arc depicted in the block diagram in chapter
"0. General". The TxD signal is from ASIC towards the mw module and
the RxD signal is from the mw module towards the ASICA. The maximum
allowed voltage of RxD towards the ASIC, is [*] V in any conditions
including transients.
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 30(17)
NET/IMN/Kito Site R&D Rev 5.2
Hans Somerma 08.10.2001 E10013984RE_C2
________________________________________________________________________________
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
31(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
6. GENERAL
6.1. Construction
6.2. Maximum dimensions with connector pairs (LxWxH)
Frequency band Length Width Height
[*] GHz [*] mm [*] mm As in drawings
Refer to drawings listed in section 0 (General).
Connector locations are shown in drawings.
6.2.1. Deleted
6.2.2. Deleted
6.3. Weight [*] [*] g
6.4. Inside air temperature in outdoor unit Class 1 and 2 Class 3
Operation [*](degree)C [*](degree)C
Everything as specified [*](degree)C [*](degree)C
Rate of change [*](degree)C /min [*](degree)C /min
The operation at temperatures of [*] is specified by:
- The VCO can be locked
- The [*]work
- The specifications are relaxed according to the following table:
Name of specification Specification at Specification at Unit
[*] Class 1 and 2 [*]Class 3
--------------------- ----------------- ---------- ----
1.5, Pulling and Crosstalk Combine Combined
1.5.1
Spec [*] dB Spec [+3] dB
1.16 Phase noise Spec [*] dB Spec [+2] dB
2.5 Total RX gain Spec [*] dB Spec [+/-1] dB
2.6 RF Maximum level [*] dBm
2.6.1 IM3 at [*] Not applicable Spec [+3] dB DBc
2.9 Total RX noise figure Spec [*] dB Spec [+0.2] dB
2.10 Image frequency rejection [*] [*] DB
2.11 RX return loss [*] [*] DB
2.13 RX gain stability over temperature Spec [*] dB Spec[*] dB dB
2.14 Total RX gain stability [*] [*] dB
4.1.1 Noise power level at TX Spec [*] dB Spec [*] dB
4.6 TX return loss [*] [*] dB
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
32(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
4.9 TX power stability, Spec [*] dB Spec [*] dB
-Temperature
6.4.1. Deleted
6.4.2. Maximum mw module baseplate temperature with maximum power dissipation [*](degree)C
6.5. Humidity, Relative [*]
Absolute [*] g/m(3)
Test specification: Refer to ETSI EN 019-2-4, Chapter 3.2 Specification T
4.lE: Non-weatherprotected locations - extended
The mw module must withstand the melting of frost on its surface
without any permanent damage in case of sudden temperature change
([*] C)
6.6. Deleted
6.7. Vibration, Frequency [*] Hz
Acceleration [*] m/ sZ
Frequency [*] Hz
Displacement [*] mm
Test specification: Refer to ETSI EN 019-2-4, Chapter 3.2 Specification T
4.lE: Non-weatherprotected locations - extended
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
33(27)
IP Mobility Networks (IMN) MWU Specifications Approved
[*] 21.01.2003
[*] Confidential
6.8. Shock, Operation Acceleration [*] m/ s2
Duration [*] ms
Test specification: Refer to ETSI EN 019-2-4, Chapter 3.2 Specification T
4.11: Non-weatherprotected locations - extended, Class 4M5
Transportation Acceleration [*] m/s'
Duration [*] ms
Test specification: Refer to ETSI EN 019-2-2, Chapter 3.2 Specification T
2.2: Careful transportation, Table 4: Test specification T 2.2: Careful
transportation - mechanical tests
6.9. MTBF, according to Bellcore or British Telecom at [*](degree)C mw
module baseplate temperature
6.9.4. Microwave module total [*] fit
6.9.5. Expected lifetime of the mw module [*] years
The expected lifetime of the mw module is [*] years. The FITs of the
mw modules will be followed and the long term statistic shall show
better than [*] in a period of [*] years. This equals on average [*]
mw modules in [*] years. A fault is defined as a customer return
attributed to the mw module.
Document Id:
E10014774QE_E0
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 1(17)
NET/IMN/Kilo Site R&D Rev 5.2
[*] 08.10.2001 E10013984RE_C2
MICROWAVE MODULE ID EEPROM DATA STRUCTURE
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 2(17)
NET/IMN/Kilo Site R&D Rev 5.2
[*] 08.10.2001 E10013984RE_C2
CONTENTS
0. DOCUMENT HISTORY .............................................. 3
1. introduction................................................... 4
1.1 Purpose .................................................. 4
1.2 Related Documents ........................................ 4
2. File/record system ............................................ 5
2.1 Attribute ................................................ 5
2.2 Protection ............................................... 6
2.3 End of data .............................................. 6
3. MWU Identification and calibration data ....................... 7
3.1 Code numbers, attributes, and protection ................. 7
3.2 Description of records ................................... 7
3.2.1 MWU Item Name ....................................... 7
3.2.2 MWU Serial Number.................................... 7
3.2.3 MWU RX Gain Calibration.............................. 8
3.2.4 MWU Band ............................................ 8
3.2.5 MWU Half of Band .................................... 8
3.2.6 MWU Division Ratio .................................. 8
3.2.7 MWU RX IF Range ..................................... 9
3.2.8 MWU BSDET Limits..................................... 9
3.2.9 MWU TXPWR Calibration ............................... 9
3.2.10 MWU Time Counters.................................... 10
3.2.11 MWU RX Gain Temp Coeff............................... 10
3.2.12 MWU TXPWR Temp Coeff................................. 10
3.3 Code structure definitions................................ 11
4. Address map ................................................... 13
5. APPENDIX for [*]GHz MWU ....................................... 16
5.1 Description............................................... 16
5.2 Code numbers, attributes, and protection for [*]GHz MWU... 17
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 3(17)
NET/IMN/Kilo Site R&D Rev 5.2
[*] 08.10.2001 E10013984RE_C2
0. DOCUMENT HISTORY
Document no. Date Comment
------------ ---- -------
none 26.6.1997 First document.
E10013984RE_00 "Rev 2" 17.08.1998 File system changed, Code ID, checksum and attribute
added. Data not written twice anymore, checksum is
calculated for each record, not for one memory block.
E10013984RE_AO "Rev 3.0" 11.12.1998 File system changed, a protection byte added to file
header, attribute content changed. *Item ID's changed
to component codes.
E10013984RE_BO "Rev 4.0" 28.01.1999 Document history added.
The "MWU TXPWR Calibration" file specified in more
detail, order of data now more clear. Also the
description of other files are updated.
Two temp coefficient records added.
End of Data requirement added.
Address map included.
E10013984RE_CO "Rev 5.0" 17.03.1999 Scaling of the temperature coefficients changed from
100 to 10000.
E10013984RE_Cl "Rev5.1" 21.03.2001 Refining and improving the text and checking validity
of the document. (KVe, TVa, NNo)
E10013984RE_C2 "Rev5.2" 08.10.2001 Table of contents added, Appendix to allow multiple
calibration tables for [*]GHz. (NNo)
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 4(17)
NET/IMN/Kilo Site R&D Rev 5.2
[*] 08.10.2001 E10013984RE_C2
1. INTRODUCTION
1.1 PURPOSE
The purpose of this document is to specify identification and
technical information to be stored in the [*] Microwave Module
EEPROM. The data be loaded into the memory by the supper.
1.2 RELATED DOCUMENTS
Document no. Version Date Name
------------ ------- ---- ----
CMFE_CustomConf_cnf.h rev 0.6 17.03.1999 CMFE_CustomConf_cnf.h
NESS O99C60 19.09.2000 NET Requirements of Labeling of Incoming Packages
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 5(17)
NET/IMN/Kilo Site R&D Rev 5.2
[*] 08.10.2001 E10013984RE_C2
2. FILE/RECORD SYSTEM
EEPROM has a simple file (or record) system as shown below.
Ach 06h 27h 6Eh 01H FFh 10h
--- --- --- --- --- --- ---
[*] [*] [*] [*] [*] [*]
[*] [*] [*] [*] [*] [*]
[*] [*]
- Checksum is calculated by summing all the bytes in the record (byte
by byte) except the checksum itself (overflown bits are discarded)
- Size is the number of the bytes in the record excluding Checksum
- Code ID identifies the record (see Chapter 3.1 for details)
- Attribute is a bit coded byte, which specifies the format of the
data (see Chapters 2.1, 3.1 and 3.3 for details)
- Protection is a bit coded byte, which specifies the read/write
protection (see Chapter 2.2 for details)
As an example, the content of "MWU Division Ratio" record is described:
The division ratio of the [*]GHz module is [*] (TX frequency / FD!V
frequency) and the associated attribute byte is 0000 0001 (in binary
format), code ID is [*] (decimal value), and protection byte is [*] (in
binary format). It follows that the size is then 6 bytes and the check sum
is [*] ((binary value).
The records are stored in the EEPROM sequentially starting with the first
record and first byte available. Before starting the writing procedure,
the memory content should be erased with an initialize procedure available
for the memory chip used.
Note, that record "MWU Time Counters" is not used by the MWU supplier and
these files should be stored with zeros as data values, whereas, Code ID
and size of the file should be stored as required.
2.1 ATTRIBUTE
Attribute byte specifies the value type used (see Chapters 3.1 and 3.3)
and whether a meaning of data is included or not. IN MWU EEPROM no meaning
(zero) is added to the records.
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 6(17)
NET/IMN/Kilo Site R&D Rev 5.2
[*] 08.10.2001 E10013984RE_C2
------------------------------------------------------------------------------------------------------------------
Bit
------------------------------------------------------------------------------------------------------------------
7 6 5 4 3 2 1 0
------------------------------------------------------------------------------------------------------------------
Reserved Meaning of data Type of Value
0000 [*]
0 = no meaning 0001 [*]
0010 [*]
1 = meaning included 0011 [*]
(meaning separated from 0100 [*]
value with `;' character 1000 [*]
and contains ASCII data) 1001 [*]
1010 [*]
1011 [*]
2.2 PROTECTION
Read and write protection of the data is not used at the moment for MWU
EEPROM. Instead, FFh values should be used.
------------------------------------------------------------------------------------------------------------------
Bit
------------------------------------------------------------------------------------------------------------------
7 6 5 4 3 2 1 0
------------------------------------------------------------------------------------------------------------------
Reserved Write protection Reserved Read protection
000 Fully protected, no one 000 Fully protected, no one
can update the record can update the record
001 Record can be updated by 001 Record can be read by
class 1 class 1
010 Record can be updated by 010 Record can be read by
class 2 class 2
100 Record can be updated by 100 Record can be read by
class 3 class 3
111 Unprotected, anyone can 111 Unprotected, anyone can
update the record (class read the record (class
0). All other bit 0). All other bit
combinations mean that combinations mean that
the record is somehow the record is somehow
write protected read protected
2.3 END OF DATA
After the last file, `End of data' record should be stored as below:
------------------------------------------------------------------------------------------------------------------
Checksum Size Code ID Attribute Protection
------------------------------------------------------------------------------------------------------------------
0h 0h FFh FFh 0h 0h
------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 7(17)
NET/IMN/Kilo Site R&D Rev 5.2
[*] 08.10.2001 E10013984RE_C2
3. MWU IDENTIFICATION AND CALIBRATION DATA
The data stored to the EEPROM is described in this chapter. The actual
data format differs from record to record (refer to Chapter 3.3 "Code
structure definitions" for details).
3.1 CODE NUMBERS, ATTRIBUTES, AND PROTECTION
--------------------------------------------------------------------------------------------------------
CODE ID ATTRIBUTE PROTECTION TYPE STRUCTURE FORMAT DESCRIPTION RECORD
SIZE
(BYTES)
--------------------------------------------------------------------------------------------------------
10050 00000000 11111111 ASCII [*] [*]
10051 00000000 11111111 ASCII [*] [*]
10052 00001000 11111111 Structure CMFE_GainCalib [*] [*]
10053 00001000 11111111 Structure CMFE Band [*] [*]
10054 00000001 11111111 Uint8 [*] [*]
10055 00000001 11111111 Uint8 [*] [*]
10056 00001000 11111111 Structure CMFE Band [*] [*]
10057 00001000 11111111 Structure CMFE Limit [*] [*]
10058 100001000 11111111 Structure CMFE_TXPWRCalib [*] [*]
10059 00001000 11111111 Structure CMFE Time [*] [*]
10060 00001010 11111111 Int16 [*] [*]
10061 00001010 11111111 Int16 [*] [*]
total size used [*]
total size with checksums [*]
EOF [*]
TOTAL SIZE [*]
3.2 DESCRIPTION OF RECORDS
3.2.1 MWU ITEM NAME
MWU item names are different for each band and duplex frequency. These
names (component codes) are provided by Nokia.
The length of the item name is [*]header) and format is [*]
3.2.2 MWU SERIAL NUMBER
As defined in document NESS 099C60 "NET Requirements of labeling of
Incoming Packages", the serial number is a symbol of 11 characters in
length, and it consists of the following data:
--------------------------------------------------------------------------------
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 8(17)
NET/IMN/Kilo Site R&D Rev 5.2
[*] 08.10.2001 E10013984RE_C2
Serial number: FFYYWKNNNNN
FF = factory symbol; e.g. L1
YY = year; e.g. 88
WK = number of the week; e.g. 13
NNNNN = consecutive number: e.g. 0O123
The factory symbols are provided by Nokia (each factory ahs to have its
own symbol).
The length of the serial number is [*]\
3.2.3 MWU RX GAIN CALIBRATION
Receiver downconvermion gain calibration points measured at
[*]frequencies are saved using this structure. Two [*]bit numbers
(order MSB, ..., LSB) are used to store the values: frequency in GHz
multiplied by [*]and measured gain in dB multiplied by [*]All the
frequency values have to be stored first, then all gain values
Frequency format is unsigned integer (Uint16) and gain format is signed
integer (Int16).
Total length of data is [*]).
3.2.4 MWU BAND
The lowest and the highest transmitter frequencies are stored as [*]bit
numbers in kHz (order MSB, ..., LSB).
Both formats are unsigned integer ([*]).
Total length of data is [*].
3.2.5 MWU HALF OF BAND
One byte value for identification of the receiver mixer mode is needed:
0 = [*] BAND MODULE (TX frequency is lower than RX frequency)
1 = [*] BAND MODULE (TX frequency is higher than RX frequency)
Format is unsigned integer (Uint8),
Total length is 1 byte (+ 5 byte header).
3.2.6 MVVU DIVISION RATIO
MWU division ratio is transmitter frequency divided by the FDIV
frequency. E.g., if the VCO in the module is multiplied by [*]to get
the output frequency, and the VCO signal is divided by [*]to get the
FDIV signal, the division ratio value is then 8.
Format is unsigned integer ([*]).
Total length is [*].
--------------------------------------------------------------------------------
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 9(17)
NET/IMN/Kilo Site R&D Rev 5.2
[*] 08.10.2001 E10013984RE_C2
3.2.7 MWU RX IF RANGE
MWU RX IF range is the used bandwidth stored as lower and upper limits
in kHz using [*]bit numbers (order MSB, ... , LSB).
Format is unsigned integer ([*]).
Total length of data is ([*]
3.2.8 MWU BSDET LIMITS
BSDET signal limits are given by the supplier. In operating conditions
the BSDET signal should be within these limits, otherwise an alarm is
generated in the system. The value stored is the BSDET voltage
multiplied by 100 (e.g. -2.7 V = -270)
Format is signed integer (Int16).
Total data length is (2 bytes x 2 limits) = 4 bytes (+ 5 byte header).
3.2.9 MWU TXPWR CALIBRATION
This structure is used to store the TXPWR versus output power
calibration data. The scaling is one byte long and represents DET_CTRL1
and DET_CTRL2 values as shown below:
DET_CTRL1 DET_CTRL2 OUTPUT POWER SCALING VALUE
--------------------------------------------------------------------------------
1 1 High power [*]
1 0 [*]
0 1 [*]
0 0 Low power [*]
TXPWR voltages multiplied by [*]are stored using two bytes for each
value, and then the measured output power in dBm multiplied by [*]is
stored using [*]bytes per each value. [*]data points per scaling value
are saved.
The data is stored by writing at first all scaling values, then all
voltage values, and finally, all power values. Scaling runs from the
highest value to the lowest, and voltage runs from the lowest value to
the highest value.
Scaling is stored in unsigned integer format ([*]), voltages as
unsigned integers ([*]), and powers as signed integers ([*]).
Total data length is [*].
--------------------------------------------------------------------------------
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 10(17)
NET/IMN/Kilo Site R&D Rev 5.2
[*] 08.10.2001 E10013984RE_C2
Below is an example of the MWU TXPWR calibration data.
[*]
3.2.10 MWU TIME COUNTERS
These counters are used to store the time in seconds the module has
been used at low temperatures, at high temperatures, and total time of
use. The supplier is requested to load these values with zeros, Each
value is stored using four bytes and unsigned integer format.
Tote data length is [*].
3.2.11 MWU RX GAIN TEMP COEFF
The [*]change over temperature compared to gain at room temperature (25
(degree)C) is stored as dB/,C. If the [*]decreases when temperature
increases, the coefficient is negative. An average value should be
used. The value is multiplied by [*].
Format is signed integer ([*]).
Total data length is [*].
3.2.12 MWU [*]COEFF
The [*]of the [*]change over temperature compared to [*]at room
temperature (25 (degree)C) is stored as [*]. This value gives the
[*]change over temperature with a constant TXPWR voltage. This value
should be optimized for the highest [*]scaling value (DET_CTRL1=1 and
DET_CTRL2=1). The value is multiplied by [*]. A negative value means
decreasing power with increasing temperature.
Format is signed integer ([*]).
--------------------------------------------------------------------------------
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 11(17)
NET/IMN/Kilo Site R&D Rev 5.2
[*] 08.10.2001 E10013984RE_C2
Total data length is [*]
3.3 CODE STRUCTURE DEFINITIONS
(These definitions are from file CMFE_CustomConf_cnf.h rev 0.6)
[*]
--------------------------------------------------------------------------------
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 12(17)
NET/IMN/Kilo Site R&D Rev 5.2
[*] 08.10.2001 E10013984RE_C2
4. ADDRESS MAP
An example of MWU EEPROM content is shown in the table below. The
values in the table are in decimal format and value of each byte is
shown.
[*]
--------------------------------------------------------------------------------
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 13(17)
NET/IMN/Kilo Site R&D Rev 5.2
[*] 08.10.2001 E10013984RE_C2
[*]
--------------------------------------------------------------------------------
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 14(17)
NET/IMN/Kilo Site R&D Rev 5.2
[*] 08.10.2001 E10013984RE_C2
5. APPENDIX FOR [*] GHZ MWU
5.1 DESCRIPTION
When the [*] MHz duplex spacings are combined in one high and one low
band [*] GHz MWU, then one calibration table for Rx gain and Tx power
calibration do not provide the needed accuracy. In this case the MWU
will have two calibration tables for Rx gain and Tx power calibration
values. These additional tables will be written after the other data
previously defined in this document. The `End of data' record (EOF)
shall be written after the last record. This appendix does not apply to
the [*] GHz [*] MHz variant.
The first MWU RX Gain Calibration record (Code ID 10052) shall
represent the Rx frequencies and gain values corresponding with the [*]
MHz IF frequencies and the first MWU TXPWR Calibration (Code ID 10058)
record shall represent the TX power calibration table associated to
this same frequency range.
The second MWU RX Gain Calibration record (Code ID 10062) shall
represent the Rx frequencies and gain values corresponding with the [*]
MHz IF frequencies and the second MWU TXPWR Calibration (Code ID 10063)
record shall represent the TX power calibration table associated to
this same frequency range.
This appendix does not apply if one MWU variant only covers [*] MHz or
[*] MHz duplex spacings. In this case the original MWU EEPROM
specification should be applied.
--------------------------------------------------------------------------------
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 15(17)
NET/IMN/Kilo Site R&D Rev 5.2
[*] 08.10.2001 E10013984RE_C2
5.2 CODE NUMBERS, ATTRIBUTES, AND PROTECTION FOR [*] GHZ MWU
-------------------------------------------------------------------------------------------------------------------------
Code ID Attribute Protection Type Structure format Description Record size
(bytes)
-------------------------------------------------------------------------------------------------------------------------
10050 00000000 11111111 ASCII [*] [*]
10051 00001000 11111111 ASCII [*] [*]
10052 00001000 11111111 Structure CMFE_GainCalib [*] [*]
10053 00000001 11111111 Structure CMFE_Band [*] [*]
10054 00000001 11111111 Uint8 [*] [*]
10055 00001000 11111111 Uint8 [*] [*]
10056 00001000 11111111 Structure CMFE_Band [*] [*]
10057 00001000 11111111 Structure CMFE_Limit [*] [*]
10058 00001000 11111111 Structure CMFE_TXPWRCalib [*] [*]
10059 00001000 11111111 Structure CMFE_Time [*] [*]
10060 00001010 11111111 Int16 [*] [*]
10061 00001010 11111111 Int16 [*] [*]
10062 00001000 11111111 Structure CMFE_GainCalib [*] [*]
10063 00001000 11111111 Structure CMFE_TXPWRCalib [*] [*]
[*] [*]
total size with checksums [*]
[*] [*]
TOTAL SIZE [*]
--------------------------------------------------------------------------------
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
INSTRUCTIONS 16(2)
Radio Access Systems (RAS) SPECIFICATION
System Development 17.1.2003
Xxxxxx Xxxxxxxx
SPECIFICATION FOR MECHANICAL SENSITIVITY OF THE FLEXIHOPPER RADIO RELAY TERMINAL
1. GENERAL
The mechanical sensitivity of the [*] relay family is specified for a
complete terminal installed into its enclosure. Possible bit errors
caused by mechanical vibrations are detected from a radio channel with
a BER meter. The mechanical sensitivity of the terminal is separately
tested when it is operating as a receiver or as a transmitter of a hop.
Specification is the same for both case.
2. KNOCKING DEVICE
2.1 PENDULUM TYPE HAMMER
A weight with a mass of [*] kg is attached to a [*] hanging from its
upper end. The weight which is acting as a hammer has a tip made of
[*], whose hardness [*]. The shock is caused by raising the hammer from
its initial free-hanging position to distance [*] and released, letting
the hammer hit the desired spot of the terminal body.
2.2 KNOCKING SPOT
Most sensitive spot of the terminal found by knocking it with an
ordinary plastic hammer.
2.3 ENERGY OF THE SHOCK
The energy will be [*] with the pendulum hammer.
2.4 REPETITION OF THE SHOCKS
Series of [*] shocks
2.5 NUMBER OF SHOCKS CAUSING ERRORS IN THE KNOCKING SERIES
[*] erroneous results are allowed.
--------------------------------------------------------------------------------
MICROPH.RTF
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
(NOKIA LOGO)
SPECIFICATION 17(17)
NET/IMN/Kilo Site R&D Rev 5.2
Hans Somerma 08.10.2001 E10013984RE_C2
[*]
[*]
--------------------------------------------------------------------------------
mwu_eeprom_data_rev52.doc Checked by: Approved by:
08.10.2001 Kve 08.10.2001 MPI
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS,
HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE
COMMISSION PURSUANT TO RULE 24B-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS
AMENDED.
