EXHIBIT 10.9
This PROFESSIONAL SERVICES AGREEMENT is made and entered into on August 7, 1998
(the "Effective Date").
BETWEEN:
NEWBRIDGE NETWORKS CORPORATION, a. corporation incorporated under the laws
of Canada, and having its offices at 000 Xxxxx Xxxx, X.X. Xxx 00000,
Xxxxxx, Xxxxxxx, Xxxxxx X0X 0X0
("Newbridge")
AND:
MILLITECH CORPORATION, a Massachusetts corporation having its offices at 00
Xxxxxxxxxx Xxxxx, X.X. Xxx 000, Xxxxx Xxxxxxxxx, XX 00000
("Millitech")
WHEREAS:
A. Newbridge is engaged in a millimeter-wave wireless initiative for
which additional consulting, development or engineering services are required;
B. Millitech has agreed to provide such additional consulting or
engineering services in accordance with the terms of this Agreement.
NOW THEREFORE, in consideration of the mutual covenants contained herein, and
for other good and valuable consideration (the receipt and sufficiency of which
are hereby acknowledged)the parties hereto agree as follows:
1. DEFINITIONS
In this Agreement, unless the context otherwise requires:
(a) "Agreement" shall mean this Professional Services Agreement and
all attached Statements of Work, schedules and exhibits, as may be amended in
accordance with the provisions herein.
(b) "Deliverables" shall mean all information, materials, hardware,
software and/or other items to be provided in connection with, or as a result
of, the Services specified in a Statement of Work.
(c) "Services" shall mean the services to be performed by Millitech
in accordance with a Statement(s) of Work, which shall include any Deliverables.
(d) "Statement of Work" shall mean the description of Millitech's
Services and Deliverables in the form set forth in Schedule A hereto, which
shall from time to time, be executed by the parties and thereby incorporated
into, and made part of this Agreement. In the event of any conflict or
inconsistency between the terms of this Professional Services Agreement and any
Statement of Work the terms of the Statement of Work shall prevail.
2. DUTIES
2.1. Statements of Work. Millitech shall perform the Services in
------------------
accordance with this Agreement. Each Statement of Work shall become effective on
the date specified in the Statement of Work, and shall continue until completion
of the Services described in such Statement of Work, unless earlier terminated
in accordance with this Agreement.
2.2. Millitech Personnel. Millitech warrants that they have and will
-------------------
maintain on staff a sufficient number of individuals who possess the skills and
level of competency necessary to satisfactorily perform their obligations under
this Agreement in a timely manner, and will apply them to this Agreement and any
Statements of Work.
2.3. Independent Contractors. Before beginning any work, any independent
-----------------------
contractor must first sign: (i) a non-disclosure agreement with Millitech, and
(ii) an agreement assigning all rights, title and interest (including all
intellectual property and moral rights) in and to the Deliverables to Millitech.
2.4. Project Management.
------------------
(a) Each party shall appoint a project manager who shall be
responsible for all matters concerning the technical aspects, quality and
acceptance of the work performed under this Agreement.
(b) Each party shall supply information to the other, as reasonably
required to complete a Statement of Work.
(c) Millitech shall deliver monthly activity reports, in form and
content satisfactory to Newbridge, detailing the Services performed by Millitech
in the preceding month. Activity reports shall be delivered no more than fifteen
(15) days following the end of the calendar month to which they relate. Any such
reports shall be subject to verification and review.
(d) Any change to this Agreement, whether by modification or
addition, must be accomplished by a formal contract amendment signed by the
authorized representatives of Newbridge and Millitech. Millitech will quote to
Newbridge the cost associated with the change in the Statement of Work and the
effect on the deliverable schedule.
2
2.5. Timeliness of Performance. Millitech acknowledges that timely
-------------------------
performance is critical to enable Newbridge to meet its schedules and
commitments, and Millitech shall use reasonable best efforts to meet the
delivery dates set forth in a Statement of Work.
2.6. Escalation. If the Services cannot be completed as scheduled,
----------
Millitech is late in meeting more than one delivery date, or Millitech fails to
meet any specific delivery date which may jeopardize the project, Millitech
agrees to escalate such matter to an employee of Vice-President level or higher.
Such employees shall seek to correct such delays as soon as possible.
2.7. Place for the Services. If the Services are performed at Newbridge's
----------------------
premises, Millitech may have access to Newbridge's premises only during
Newbridge's normal business hours. Millitech must observe Newbridge's
procedures for security and obey Newbridge's reasonable instructions while on
Newbridge's premises.
2.8. Third Party Intellectual Property. Before it accepts a Statement of
---------------------------------
Work or a change to a Statement of Work, Millitech may, at its option, review
and investigate such proposed Statement of Work to determine if it requires or
infringes any third party intellectual property. If after investigation,
Millitech believes in good faith that such Statement of Work requires or
infringes third party intellectual property, it shall promptly notify Newbridge
in detail of the reasons why it has come to such conclusions. Upon receipt of
such notice, Newbridge will, at its sole discretion either:
(a) procure at its own expense the necessary rights to such third
party intellectual property;
(b) request Millitech to procure itself the necessary rights to
such third party intellectual property at Millitech's expense, and the parties
agree to re-negotiate in good faith any changes this may require to the pricing
of the Statement of Work, so that Newbridge will reimburse the incremental
expenses incurred by Millitech for such procurement;
(c) alter the proposed Statement of Work so that it no longer
requires or infringes such third party intellectual property; or
(d) withdraw the proposed Statement of Work.
This section shall not apply to any Statement of Work or change to
Statement of Work which has been executed by Millitech. Except as expressly
provided in this Section 2.8, Millitech shall be responsible for obtaining, at
its expense, all rights to third party intellectual property, necessary to
comply with its obligations under this Agreement.
3. PAYMENT AND TAXES
3.1. Fees. The fees for the Services (the "Fee") is as follows:
----
3
(a) FIXED PRICE
-----------
If the Statement of Work specifies a fixed price for the Services,
Newbridge will pay the fixed price stated in the Statement of Work.
Millitech may invoice Newbridge for the fixed price on the date(s) stated
in the Statement of Work.
(b) TIME AND MATERIALS
------------------
(i) If the Statement of Work specifies time and materials charges
for the Services, Newbridge will pay charges based on the time
Millitech takes to perform the Services (exclusive of time for
travel, meals, and other personal time). The charges will be
calculated using the rates stated in than Statement of Work.
Millitech may invoice Newbridge monthly (or as otherwise specified
in the Statement of Work) for charges for work performed in
accordance with this Agreement during the previous month. These
invoices must be accompanied by time sheets approved by Newbridge;
and
(ii) Millitech will perform the Services for not more than the
Maximum Charge specified in the Statement of Work.
3.2. Travel and Out-of-Pocket Expenses. If specified in a Statement of
---------------------------------
Work, Newbridge will reimburse Millitech for all reasonable and pre-approved
travel and out-of-pocket expenses that are documented by receipts and incurred
by Millitech's employees when traveling outside the metropolitan area of their
usual place of employment to perform the Services ("Expenses").
3.3. Taxes and Employee Benefits. Newbridge agrees to pay any applicable
---------------------------
sales taxes payable in respect of the performance of the Services (the "Taxes").
Newbridge may deduct from payments to non-residents of Canada any amounts
required to be withheld under Canadian legislation. For greater certainty, as of
the Effective Date,. amounts to be withheld are currently described in Section
212 and Regulation 105 of the Income Tax Act, Canada, as amended, all of which
are subject to change. Millitech shall be solely responsible for the payment of
its personnel's salaries, unemployment insurance, worker's compensation,
employee benefits and other employment related charges and deductions.
3.4. Payment. Millitech's invoices will conform to the reasonable
-------
requirements communicated from time to time to Millitech by Newbridge. Invoices
issued in accordance with this Agreement, are payable by wire transfer within
forty-five (45) days of receipt. Millitech will keep proper records of services
performed and amounts invoiced to Newbridge. Newbridge or its agents may audit
these records upon reasonable notice to Millitech, for expenses and time and
materials charged to Newbridge.
3.5. No Other Charges. Except as may be specifically agreed to in a
----------------
Statement of Work, there shall be no other charges or fees payable by Newbridge
to Supplier except for the Fees, Expenses and Taxes.
4
4. TRAINING
4.1. The parties agree that Millitech's personnel may require specialized
training ("Training") in order to perform the Services. If such Training is
required, it shall be specified in the Statement of Work. The parties agree
that Newbridge shall not be responsible for any of Millitech's Fees and Expenses
during the Training period.
5. ACCEPTANCE
5.1. Newbridge may review or test any Deliverable for up to the period
specified in the Statement of Work, or thirty (`)O) days should no period be
specified (the "Testing Period"). Newbridge shall give reasonable advance
notice to Millitech of such test and Millitech shall have the right to witness
such tests, at its own expense. Promptly after or during the Testing Period,
Newbridge will notify Millitech of any errors or deficiencies in the
Deliverable, or failure of the Deliverable to conform to its specifications or
documentation (collectively "Deficiencies"). Millitech will then have up to
thirty (30) days to correct the Deficiencies, whereupon Newbridge will have an
additional Testing Period to verify that the Deficiencies have been corrected.
However, if after thirty (30) days from the end of the first Testing Period, the
Deliverables still contain Deficiencies, Newbridge may: (a) terminate the
Statement of Work and/or the Agreement, or (b) let Millitech continue its
attempts to correct the Deficiencies for a time specified by Newbridge. If at
the end of that specified time Millitech has not corrected the Deficiencies,
Newbridge may terminate the Agreement.
6. WARRANTY
6.1. Millitech hereby represents and war-rants to Newbridge that:
(a) Millitech has the right to enter into the Agreement, and
provide the Services;
(b) the Services shall be performed in a competent, professional,
xxxxxxx-like manner, in accordance with current industry standards;
(c) Millitech's personnel performing the Services hereunder shall
be qualified to perform the tasks and functions which they are assigned;
(d) The Services and Deliverables shall not in any way be based
upon any confidential or proprietary information or materials derived from, or
owned by, any third-party source, unless Millitech is specifically authorized in
writing by such source;
(e) if software is developed by Millitech as part of the Services,
the software will not contain "product keys", "expiry codes" or other codes or
devices that may prevent Newbridge from using the software at any time, except
as specified in the software documentation. At the time of delivery to
Newbridge, the software, and the media on which the software is delivered, will
not contain any "computer viruses" or any other programs that may affect the
normal use of the software or any other software or data;
5
(f) the Services, Deliverables, and their use and copying, will not
infringe any copyright, patent, trade secret, or other proprietary or
contractual right or obligation. This warranty does not extend to: (i) the use
of any Deliverable in manner for which is was not designed; (ii) the
unauthorized modification of the Deliverables by Newbridge; or (iii) the use of
any Deliverable in combination with any other equipment, products or other
materials, unless such equipment, products or other materials are provided by
Millitech, or referred to or recommended as appropriate for use in combination
with such Deliverable in any written material which has been: (1) made generally
available by Millitech (subject to any limitations or restrictions contained in
such materials), and/or (2) provided to Newbridge by Millitech; and
(g) any software provided to Newbridge is be designed to be used
prior to, during, and after the calendar year 2000 A.D., and shall operate
without any error relating to or arising from date data which represents or
references a leap year, different centuries, more than one century, and/or dates
from January 1, 2000. If requested to do so by Newbridge, Millitech will
promptly provide Newbridge with test results (using Newbridge's test
specification (document GFS-032)) which clearly show that the Deliverables
comply with this Year 2000 compliance warranty in all respects. Millitech shall,
without charge to Newbridge, promptly repair or replace any Deliverables which
are not compliant with the terms of this warranty, in addition to other remedies
available to Newbridge.
6.2. In the event of a breach of any of the foregoing representations and
warranties, in addition to any other remedies which may exist herein, in law or
in equity, Newbridge may require, at Millitech's expense the re-performance of
the Services sufficient to cure the breach.
7. INTELLECTUAL AND INDUSTRIAL PROPERTY
7.1. Except as may be expressly provided in a Statement of Work, all
rights, title and interest in and to the Deliverables, in any form, and
including any patents, copyrights, trade secrets, mask works and other
intellectual and industrial property rights therein, shall vest in Millitech.
7.2. Except as may be expressly provided in a Statement of Work, (a) all
rights, title and interest, including any intellectual or industrial property
rights, in and to any new or preexisting Newbridge information, materials and/or
technology shall remain vested in Newbridge or its suppliers, (b) except for the
limited right to use as necessary for the performance of the Services, Millitech
and Millitech's personnel obtain no rights, title or interest in or to any
Newbridge information, materials and/or technology, and (c) all rights, title
and interest, including any intellectual or industrial property rights, in and
to any new or pre-existing Millitech information, materials and/or technology
shall remain vested in Millitech or its suppliers.
6
8. COVENANT OF CONFIDENTIALITY
8.1. Confidential Information. Each party acknowledges that, during the
------------------------
term of this Agreement, it may be exposed to certain confidential and/or
proprietary information and materials regarding the other party's business,
including but not limited to information concerning a party's technology,
customers and suppliers, which is identified as confidential or proprietary at
the time of disclosure ("Confidential Information").
8.2. Exclusions. However, Confidential Information shall not include any
----------
information or material which: (i) is in (or comes into) the public domain,
provided it came into the public domain through no fault of the receiving party;
(ii) can be demonstrated to have been independently developed by the receiving
party without reference to the Confidential Information; (iii) is rightfully
received by the receiving party from a third party not under an obligation of
confidence to the disclosing party with respect thereto; or (iv) is required by
law or regulation to be disclosed, but then only to the extent of such required
disclosure and under confidentiality to the extent reasonably possible.
8.3. Restrictions. Each party will: (i) use a reasonable standard of
------------
care to protect Confidential Information, (ii) not use Confidential Information
except as permitted by the party disclosing such Confidential Information, (iii)
not disclose Confidential Information except to its employees or representatives
to whom disclosure is necessary to effect the purposes of this Agreement, and
who are similarly bound to hold the Confidential Information in confidence; and
(iv) not reproduce Confidential Information without the disclosing party's prior
written consent.
8.4. Computer and Related Access. If it is necessary for Millitech to have
---------------------------
access to (either remotely or on-site) and/or use any Newbridge computer system
or network in performing the Services, Millitech shall limit such use and access
solely to that required for the performance of the Services, and shall not
access or attempt to access any other computer systems, networks, files,
software or services without the express prior written consent of Newbridge.
Upon request by Newbridge, Millitech shall provide the names of all Millitech
personnel having access to any Newbridge computer system or network. Millitech
shall, and shall ensure that its personnel shall, strictly follow any and all
security rules and procedures relating to the use of Newbridge computer systems.
In the event of actual or suspected misuse by Millitech or its personnel,
Newbridge reserves the right to restrict access to any of its computer systems
on such terms as it sees fit. All user identification numbers, codes and
passwords disclosed to Millitech and any information obtained by Millitech as a
result of Millitech's access to and/or use of Newbridge's computer systems shall
be deemed to be, and treated as, Confidential Information.
9. INFRINGEMENT
9.1. Defense and Indemnity. Millitech will defend Newbridge against any
---------------------
claim, legal proceeding or demand alleging the Services, any Deliverables, or
part thereof, infringe any copyright, patent, trade secret, or other contractual
or proprietary right (a "Claim"); provided Millitech is promptly notified of the
Claim and is given authority to defend and settle
------
7
it. Millitech will indemnify and hold Newbridge harmless from and against all
costs, expenses, legal fees, damages, settlement amounts and other liabilities
arising out of or in respect of a Claim. Notwithstanding the foregoing,
Millitech shall have no obligation to indemnify or hold Newbridge harmless under
this Section 9.1 to the extent that any Claim arises from: (i) the use of any
Deliverable in manner for which is was not designed; (ii) the unauthorized
modification of the Deliverables by Newbridge; or (iii) the use of any
Deliverable in combination with any other equipment, products or other
materials, unless such equipment, products or other materials are provided by
Millitech, or referred to or recommended as appropriate for use in combination
with such Deliverable in any written material which has been: (1) made generally
available by Millitech (subject to any limitations or restrictions contained in
such materials), and/or (2) provided to Newbridge by Millitech.
9.2. Injunctions. In the event Newbridge, its distributors or End Users
-----------
are enjoined from their use of any of the Vendor Products due to a Claim that is
subject to an obligation to indemnify by Millitech under Section 9.1 above,
Millitech will (at no charge) promptly either:
(a) procure for Newbridge the right to continue using the
Deliverables;
(b) render the Deliverables non-infringing without materially
diminishing the Deliverables' performance, functionality or features;
(c) replace the Deliverables with equivalent non-infringing goods; or
(d) if Millitech determines in its reasonable opinion that the
provisions of Sections 9.2(a) through 9.2(c) are not reasonably possible, having
made reasonable efforts, remove the Deliverables and refund Newbridge all
amounts paid in respect thereof.
9.3. Not Applicable. Section 10 ("Limitation of Liability") shall not
--------------
apply in respect to this Section 9.
10. LIMITATION OF LIABILITY
10.1. GENERAL LIMITATION. EXCEPT FOR SECTIONS 8 AND 9, AND FOR ANY CLAIMS
------------------
RELATING TO WILLFUL INFRINGEMENT OF A PARTY'S INTELLECTUAL PROPERTY PROVIDED BY
ONE OF THP- PARTIES HEREUNDER, IN NO EVENT SHALL THE TOTAL CUMULATIVE LIABILITY
OF NEWBRIDGE AND MILLITECH (INCLUDING THEIR EMPLOYEES, DIRECTORS, OFFICERS OR
AGENTS), FOR ALL CLAIMS ARISING OUT OF OR RELATING TO THIS AGREEMENT, EXCEED
ACTUAL DIRECT, PROVABLE DAMAGES, UP TO THE TOTAL AIMOUNTS PAID BY NEWBRIDGE TO
MILLITECH HEREUNDER. THE FOREGOING PROVISION LIMITING THE LIABILITY OF
NEWBRIDGE AND MILLITECH (INCLUDING THEIR EMPLOYEES, DIRECTORS, OFFICERS OR
AGENTS) SHAI L APPLY REGARDLESS OF THE FORM OR CAUSE OF ACTION, WHETHER IN
CONTRACT OR TORT, OR A BREACH OF A FUNDAMENTAL TERM CONDITION.
8
10.2. ECONOMIC LOSSES. EXCEPT FOR SECTION 9, NEWBRIDGE AND MILLITECH
---------------
(INCLUDING THEIR EMPLOYEES, DIREC RORS, OFFICERS OR AGENTS) SHALL NOT BE LIABLE
IN ANY WAY WHATSOEVER, FOR ANY INDIRECT, PUNITIVE, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, LOSS OF REVENUE OR PROFIT.
THIS LIMITATION SHALL APPLY WHETHER OR NOT SUCH DAMAGES ARE FORESEEABLE, OR
NEWBRIDGE, OR MILLITECH (OR THEIR EMPLOYEES, AGENTS, OFFICERS OR DIRECTORS) HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
10.3. Trust. The foregoing provisions limiting the liability of
-----
Newbridge's and Millitech's employees, agents, officers and directors shall be
deemed to be trust provisions for the benefit of such employees, officers,
directors and agents and shall be enforceable by such as trust beneficiaries.
11. TERM & TERMINATION OF THE AGREEMENT
11.1. Term. This Agreement shall begin on the Effective Date, and shall
----
continue for the longer of five (5) years from the Effective Date or until
completion of all Statements of Work entered into hereunder, unless terminated
earlier as provided herein.
11.2. Termination for Cause. Either party may terminate this Agreement
---------------------
and/or Statement of Work(s) if: (a) if the other party breaches any material
term of this Agreement, and fails to remedy such breach within thirty (30) days
of receiving notice to do so by the nondefaulting party, or (b) in the event
that the other party becomes insolvent, makes a general assignment to creditors,
has a receiver appointed or files a petition in bankruptcy.
11.3. Termination Without Cause. Millitech hereby agrees that Newbridge
-------------------------
may terminate this Agreement and/or any Statement of Work at any time without
cause upon thirty (30) days written notice to Millitech. However, after
notification of its intent to terminate under this Section 1 1.3, Newbridge
agrees, at Millitech request, to discuss (without obligation to negotiate) at an
Executive Vice-President level or higher, the reasons for termination.
11.4. Termination for Non-Payment. In addition to its rights under
---------------------------
Section 1 1.2, Millitech may terminate this Agreement if Newbridge fails to pay
any undisputed amount which is in excess of ten thousand US dollars ($10,000),
either individually or in the aggregate with all other amounts past due, and
Newbridge fails to remedy such undisputed non-payment within five (5) business
days of receiving notice to do so by Millitech.
11.5. Effect of Termination.
---------------------
(a) Upon termination without cause, Millitech will deliver to
Newbridge all Deliverables (complete or incomplete) then in its possession or
control and Newbridge shall pay all the Fees, Expenses and Taxes due and payable
to Millitech for such Deliverables and Services completed or partially completed
up to the date of termination of the Agreement and/or any Statement of Work.
9
(b) Upon termination with cause, and if any Deliverables are
incomplete as of the effective date of termination, Newbridge may, at its sole
option, return such incomplete Deliverable for a full refund of all amounts paid
to Millitech for such incomplete Deliverable.
(c) Upon termination of this Agreement with or without cause:
(i) Upon the termination of this Agreement, each parties
shall promptly destroy or return to the other all
Confidential Information, including all copies thereof,
and, upon request, shall certify in writing that all such
materials have been destroyed or returned;
(ii) Millitech shall promptly refund Newbridge all Fees or
other amounts paid in advance for Services not yet
provided; and
(iii) Sections 3, 6, 7, 8, 9, 10, 11.5 and 13 shall survive
any termination or expiry of this Agreement.
12. STANDARDS COMPLIANCE & PRODUCT CHANGES
Newbridge and Millitech shall comply with the standards compliance and
product change requirements, as set forth in Schedule B hereto.
13. GENERAL
13.1. Independent Contractors. Millitech and Newbridge are independent
-----------------------
contractors and neither party will act as the legal agent of the other or
otherwise case the other to incur liability in any manner whatsoever. Neither
party shall issue a news release, public announcement or advertisement
concerning the existence of this Agreement or its efforts in connection with
this Agreement without the prior written approval of the other party.
13.2. Assignment. Either party may assign or transfer (by operation of
----------
law or otherwise) this Agreement only by written notice to the other party. In
the event that a party wishes to assign or transfer this Agreement (the
"Assignor/Transferor") in accordance with this Section 13.2:
(i) The Assignor/Transferor must give the other party (the "Other
Party") at least thirty (30) days prior notice;
(ii) the assignee/transferee must accept the foregoing assignment/
transfer and agree that, from and after the date of such
assignment/transfer, it shall be bound by and perform all of
the provisions of this Agreement to the same extent as if the
assignee/transferee had been an original party to this
Agreement instead of the Assignor/Transferor; and
10
(iii) in addition to its other rights under this Agreement, the
Other Party may, in its discretion, terminate the Agreement for
convenience upon ninety (90) days written notice.
13.3. Waiver. No waiver by either party of any delay, default or
------
omission by the other party shall affect or impair the rights of the non-
defaulting party in respect of any subsequent delay, default or omission of the
same or different kind.
13.4. Force Majeure. Neither party shall be deemed to failure to
-------------
perform its obligations resulting from ("Force Majeure"). Each party will use
its best efforts to anticipate such delays and failures, and to devise means to
eliminate or minimize them.
13.5. Notice. All notices, demands or requests required or permitted
------
hereunder shall be deemed property given when sent in writing to the designated
representative of the other party at the addresses set out above, or such other
address as a party may from time to time advise, by way of:
(a) registered first class mail;
(b) commercial courier, return receipt requested;
(c) personal delivery; or
(d) facsimile transmission, receipt of which ha been acknowledged by
recipient.
Notices shall be deemed received when physically received by the recipient.
Notice to Newbridge shall be sent to: VP Business Development (with a copy to
Newbridge's Legal Department)
Notices to Millitech shall be sent to: President
13.6. Severability. The provisions of this Agreement shall be deemed
------------
severable. If any provision of this Agreement shall be held unenforceable by
any court of competent jurisdiction, it shall be severed from this Agreement and
the remaining provisions shall remain in full force and effect.
13.7. Applicable Law. This Agreement shall be governed by the laws in
--------------
force in the State of Virginia (except for its conflict of laws provisions), and
the parties hereby irrevocably submit to the non-exclusive jurisdiction of the
courts located in the State of Virginia. The parties expressly exclude from this
Agreement all the provisions of the Vienna Convention, 1980 (The United Nations
Convention on Contracts for the International Sale of Goods). The remedies
specified in the Agreement will not be considered the sole remedies of the
parties.
11
13.8. Attorney's Fees. If litigation or other judicial or administrative
---------------
action is commenced between the parties concerning, any dispute arising out of
or relating to this Agreement, the prevailing party in any contested ancillary
proceeding relating to the action (e.g. motions to transfer, to compel
discovery, etc.) and the prevailing party in the action itself will be entitled,
in addition to any other award that nay be made, to recover all court costs or
other official costs and all reasonable expenses associated with the ancillary
proceeding or action, including without limitation reasonable attorney's fees
and expenses.
13.9. Entire Agreement. This Agreement sets forth the entire agreement
----------------
between the parties pertaining to the services to be provided by Millitech to
Newbridge, and no modification, variation or amendment of it shall be binding
upon the parties unless it is in writing and signed by both parties. The parties
acknowledge that there are no collateral agreements, representations,
warranties, arrangements, understandings or otherwise, written or oral,
pertaining to the subject matter of this Agreement. All additional or
inconsistent terms or conditions contained in either party's purchase orders,
acknowledgments, invoices or other business forms shall be void and of no
effect.
IN WITNESS WHEREOF, the parties have caused this Agreement to be executed
by their duly authorized representatives.
Newbridge Networks Corporation Millitech Corporation
By: /s/ Xxxxxx Xxxxx By: /s/ Xxxx X. Xxxxxxxxxx
------------------------------ ----------------------------
Name: Xxxxxx Xxxxx Name: Xxxx X. Xxxxxxxxxx
---------------------------- ---------------------------
Title: Executive Vice President Title: President and CEO
--------------------------- --------------------------
12
SCHEDULE A-1
Newbridge/Millitech
OTU (P/N 9031237801)
STATEMENT OF WORK #1
This is a Statement of Work entered into and pursuant to the Professional
Services Agreement between Newbridge Networks Corporation ("Newbridge") and
Millitech Corporation ("Millitech"), dated the 7th day of August, 1998.
SERVICES TO BE PERFORMED:
Millitech shall perform engineering services for Newbridge to implement the
Outdoor Transmitter Unit (referred to as the "Product") pursuant to the mutually
agreed technical specification attached hereto as Exhibit A-1 (the "Technical
Specification").
MILLITECH DELIVERABLES:
. Project Plan
. Critical Design Review Documentation Package
. Five (5) OTU Engineering Prototype units
. Design Verification Report for Engineering Prototypes
. Five (5) OTU Pre-production Units
. Design Verification Report for Pre-production Units
For the purposes of this Statement of Work:
. "Engineering Prototype" shall mean an OTU which must be functional with
all electrical and mechanical interfaces pursuant to the Technical
Specification. The units are intended for Research and Development use
primarily for integration, functional testing and limited characterization.
Although there may be non-conformance with the Technical Specification, the
Engineering Prototypes must be usable and Millitech must disclose known
problems to Newbridge in the design verification report.
. "Pre-Production Prototype" shall mean an OTU which is compliant to the
form, fit and function of the Technical Specification of the OTU. The units
are intended for Field Trial use to enable system testing and
characterization. Although there may be minor parametric non-conformance
with the Technical Specification, the Pre-Production Prototypes must be
usable with the final Product quality OTU and all non-conformance must be
disclosed to Newbridge in the design verification report. Newbridge would
have an option to purchase Pre-Production units until full production units
become available.
The parties shall provide technical information, to each other, which they
believe will be necessary to allow completion of the development activity.
DELIVERY DATE/PERFORMANCE SCHEDULE
Milestones Delivery Date Owner
---------- ------------- -----
1.0 Project Plan [***] Millitech
2.0 Critical Design Review [***] Both
[***] Confidential Treatment Requested.
Page 13
3.0 Delivery of Two (2) Engineering Prototypes [***] Millitech
3.1 Delivery of Three (3) Engineering Prototypes [***] Millitech
4.0 Design Verification Report for Eng. Proto. [***] Millitech
5.0 Delivery of two (2) Pre-Production Proto.s [***] Millitech
5.1 Delivery of Three (3) Pre-Production Proto.s [***] Millitech
6.0 Design Verification Report for Pre-pro. Proto. [***] Millitech
7.0 Approval of Pre-production Prototypes [***] Newbridge
Millitech shall assume prime project management responsibility for the project.
The Project Managers will create a project plan which shall include milestones
for the deliverables as mutually agreed to by the parties. Millitech shall
provide the necessary bi-weekly update information to allow Newbridge to track
the project.
SPECIFICATIONS FOR SERVICES:
Millitech shall represents and warrants that its deliverables for the Products
and any other items developed pursuant to this Statement of Work shall comply
with and operate in accordance with a mutually agreed-to Technical Specification
and the Standards Compliance of Schedule B to the Agreement.
The parties shall address all technical issues through their respective
technical coordinators. Initially the technical coordinators will be Colin Soul
of Newbridge and Xxx Xxxx of Millitech. Any change of the technical coordinators
would be mutually agreed to by the parties.
AMOUNT PAYABLE FOR SERVICES:
Newbridge shall fund Millitech for the development of the deliverables to a
maximum as provided below:
[***]
[***]
Amount shall be payable on the [***] as outlined below.
PAYMENT SCHEDULE:
Deliverables Payment (USD)
------------ -------------
[***] [***]
[***] [***]
[***] [***]
[***] [***]
Payment terms shall be net 30 days after receipt of invoice. Invoices shall be
submitted in accordance with the Payment Schedule above.
ACCEPTANCE TEST CRITERIA
The acceptance test of the Engineering and Pre-Production Prototypes will use
the most current revision of the Compliance Matrix as the pass/fail criteria for
such Prototypes and shall be in
[***] Confidential Treatment Requested.
Page 14
accordance with the definition of "Engineering Prototype" and "Pre-Production
Prototype" as stated herein. Newbridge may, in its sole discretion, waive in
whole or in part any non-compliance of such Prototypes.
DISTRIBUTION/RESALE OF THE DELIVERABLES:
Millitech may commercially distribute and resell the Deliverables, provided that
in so doing, it does not disclose any Newbridge Confidential Information [***].
Subject to the foregoing Millitech may disclose the other specifications of the
Deliverables only for the distribution and resale of the Deliverables.
IN WITNESS WHEREOF, the parties have caused this Statement of Work to be
executed by their duly authorized representatives.
Newbridge Networks Corporation Millitech Systems Corporation
By: /s/ Xxxxxx Xxxxx By: /s/ Xxxx X. Xxxxxxxxxx
----------------- -----------------------
Name: Xxxxxx Xxxxx Name: Xxxx X. Xxxxxxxxxx
--------------- ---------------------
Title: Executive Vice President Title: Pres & CEO
------------------------- --------------------
[***] Confidential Treatment Requested.
Page 15
EXHIBIT A-1
STATEMENT OF WORK #1
TECHNICAL SPECIFICATION
[***]
[***] Confidential Treatment Requested.
SCHEDULE B
STANDARDS COMPLIANCE
1. STANDARDS COMPLIANCE
1.1 Millitech Responsibilities. Millitech shall be responsible for:
--------------------------
1.1.1 Verifying and maintaining compliance of the Vendor Product to the
Standards listed herein (hereinafter referred to as "Standards"),
except as specifically and to the extent modified by a Technical
Specification attached to a Statement of Work.
1.1.2 Implementing any design changes required to the Vendor Product
for compliance of the Vendor Product to the Standards.
1.1.3 All applicable regulatory approvals for the Vendor Product sought
in Millitech's normal course of business and in accordance with
Section 1.5 of this Schedule B. For such approvals required by
Newbridge and not sought in Millitech's normal course of
business, the parties shall reasonably share the costs incurred
by the approval process, based on good faith negotiations.
1.1.4 Providing Newbridge with information, including but not limited
to soft copies of bills of materials and reliability information,
as required for Newbridge to complete evaluation of the Vendor
Product to Standards.
1.1.5 Compiling the database of all the polymers used in the Vendor
Product and ensuring they meet Bellcore NEBS flammability
requirements per Standards. This database shall be submitted to
Newbridge. (This paragraph shall not apply to the use of Xxxxxx
4003 millimeter-wave circuit board which is enclosed within an O-
ring sealed metal housing.)
1.1.6 Providing Newbridge with copies of test reports, as applicable,
for product safety, Electromagnetic Compatibility (EMC), network
interface, etc. demonstrating compliance to the Standards.
1.1.7 Notifying Newbridge of systematic failures, defined as failures
exceeding predicted failure rates as required under the
applicable Statement of Work.
1.1.8 Submitting to Newbridge qualification test results for vital
components such as power supplies, fans, optical interfaces,
batteries and ASICs.
1.1.9 Providing (under suitable non-disclosure provisions where
appropriate) documents such as PCB and mechanical drawings,
schematics, Bills of Materials, to Newbridge and Newbridge
customers, on request.
1.2 Newbridge Responsibilities: Newbridge shall be responsible for:
--------------------------
1.2.1 Verifying and maintaining compliance of the Vendor Product
integrated with Newbridge cards and modules to the applicable
Standards.
1.2.2 Advising Millitech of any design changes to the Vendor Product as
required for compliance of the Vendor Product to the applicable
Standards.
Page 17
1.2.3 Pursuing regulatory approvals as required on the Vendor
Product integrated with Newbridge cards and modules and in
accordance with Section 1.5 of this Schedule B.
1.3 Ownership of Approvals. Ownership of the approvals shall reside with
----------------------
the party responsible for obtaining and maintaining the regulatory
approvals.
1.4 Transfer of Approvals. As applicable and upon request, Millitech shall
---------------------
assist Newbridge in registering second approvals in Newbridge's name
where permitted by law. Any costs associated with second approvals
shall be borne by Newbridge.
1.5 Regulatory Approvals. The Vendor Product shall have the following
--------------------
regulatory approvals markings, as applicable:
1.5.1 Canadian Standards Association (CSA) logo or equivalent.
1.5.2 Underwriters Laboratories Inc. (UL) logo or equivalent.
1.5.3 Federal Communications Commission (FCC) Part 15 and Part 68
markings.
1.5.4 Industry Canada (IC) ICES-003 and CS-03 markings.
1.5.5 Food and Drug Administration (FDA) markings.
1.5.6 European Community CE marking to the Low Voltage Directive
(LVD), EMC directive and Telecommunications Terminal
Equipment (TTE) directive.
1.5.7 The Vendor Product documentation shall include all required
statements and markings for the Standards. Newbridge
document GEN0050 [15], titled Regulatory Approvals
Statement, can be used for guidance.
SCHEDULE A-2
Newbridge/Millitech
ORU (P/N 9031238101)
STATEMENT OF WORK #2
This is a Statement of Work entered into and pursuant to the Professional
Services Agreement between Newbridge Networks Corporation ("Newbridge") and
Millitech Corporation ("Millitech"), dated the 7 day of August 1998.
SERVICES TO BE PERFORMED:
Millitech shall perform engineering services for Newbridge to implement the
Outdoor Receiver Unit (referred to as the "Product") pursuant to the mutually
agreed technical specification attached hereto as Exhibit A-2 (the "Technical
Specification").
MILLITECH DELIVERABLES:
. Project Plan
. Critical Design Review Documentation Package
. Five (5) ORU Engineering Prototype units
. Design Verification Report for Engineering Prototypes
. Five (5) ORU Pre-production Units
. Design Verification Report for Pre-production Units
For the purposes of this Statement of Work:
. "Engineering Prototype" shall mean an ORU which must be functional
with all electrical and mechanical interfaces pursuant to the Technical
Specification. The units are intended for Research and Development use
primarily for integration, functional testing and limited characterization.
Although there may be non-conformance with the Technical Specification, the
Engineering Prototypes must be usable and Millitech must disclose known
problems to Newbridge in the design verification report.
. "Pre-Production Prototype" shall mean an ORU which is compliant to the
form, fit and function of the Technical Specification of the ORU. The units
are intended for Field Trial use to enable system testing and
characterization. Although there may be minor parametric non-conformance
with the Technical Specification, the Pre-Production Prototypes must be
usable with the final Product quality ORU and all non-conformance must be
disclosed to Newbridge in the design verification report. Newbridge would
have an option to purchase Pre-Production units until full production units
become available.
Page 2
The parties shall provide technical information, to each other, which they
believe will be necessary to allow completion of the development activity.
DELIVERY DATE/PERFORMANCE SCHEDULE
Milestones
----------
Delivery Date Owner
------------- -----
1.0 Project Plan [***] Millitech
3.0 Critical Design Review [***] Both
4.0 Delivery of Two (2) Engineering Prototypes [***] Millitech
4.1 Delivery of Three (3) Engineering Prototypes [***] Millitech
5.0 Design Verification Report for Eng. Proto. [***] Millitech
6.0 Delivery of Two (2) Pre-Prod Protos [***] Millitech
6.1 Delivery of Three (3) Pre-Prod Protos [***] Millitech
7.0 Design Verification Report for Pre-pro. Proto. [***] Millitech
8.0 Approval of Pre-production Prototypes [***] Newbridge
Millitech shall assume prime project management responsibility for the project.
The Project Managers will create a project plan which shall include milestones
for the deliverables as mutually agreed to by the parties. Millitech shall
provide the necessary bi-weekly update information to allow Newbridge to track
the project.
SPECIFICATIONS FOR SERVICES:
Millitech shall represents and warrants that its deliverables for the Products
and any other items developed pursuant to this Statement of Work shall comply
with and operate in accordance with a mutually agreed-to Technical
Specification.
The parties shall address all technical issues through their respective
technical coordinators. The technical coordinators will be Colin Soul of
Newbridge and Xxx Xxxx of Millitech. Any change of the technical coordinators
would be mutually agreed to by the parties.
AMOUNT PAYABLE FOR SERVICES:
Newbridge shall fund Millitech for the development of the deliverables to a
maximum as provided below:
[***]
[***] Confidential Treatment Requested.
Page 3
[***]
Amounts shall be payable on the [***], as outlined below.
PAYMENT SCHEDULE:
Deliverables Payment(USD)
------------ ------------
[***] [***]
[***] [***]
[***] [***]
[***] [***]
Payment terms shall be net 30 days after receipt of invoice. Invoices shall be
submitted in accordance with the Payment Schedule above.
ACCEPTANCE TEST CRITERIA
The acceptance test of the Engineering and Pre-Production Prototypes will use
the most current revision of the Compliance Matrix as the pass/fail criteria for
such Prototypes and shall be in accordance with the definition of "Engineering
Prototype" and "Pre-Production Prototype" as stated herein. Newbridge may, in
its sole discretion, waive in whole or in part any non-compliance of such
Prototypes.
DISTRIBUTION/RESALE OF DELIVERABLES
Millitech may commercially distribute and resell the Deliverables, provided that
in so doing, it does not disclose any Newbridge Confidential Information [***].
Subject to the foregoing Millitech may disclose the other specifications of the
Deliverables only for the distribution and resale of the Deliverables.
[***] Confidential Treatment Requested.
Page 4
IN WITNESS WHEREOF, the parties have caused this Statement of Work to be
executed by their duly authorized representatives.
Newbridge Networks Corporation Millitech Corporation
By: /s/ Xxxxxx Xxxxx By: /s/ Xxxx X. Xxxxxxxxxx
------------------------------ ---------------------------
Name: Xxxxxx Xxxxx Name: Xxxx X. Xxxxxxxxxx
---------------------------- -------------------------
Title: Executive Vice President Title: PRES & CEO
--------------------------- ------------------------
Title:___________________________ Title:________________________
Page 5
EXHIBIT A-2
STATEMENT OF WORK #2
TECHNICAL SPECIFICATION
[***]
[***] Confidential Treatment Requested.
SCHEDULE A-3
Newbridge/Millitech
OTRU (P/N 9031238401)
STATEMENT OF WORK #3
This is a Statement of Work entered into and pursuant to the Professional
Services Agreement between Newbridge Networks Corporation ("Newbridge") and
Millitech Corporation ("Millitech"), dated the 7 day of August, 1998.
SERVICES TO BE PERFORMED:
Millitech shall perform engineering services for Newbridge to implement the
Outdoor Transmitter Receiver Unit (referred to as the "Product") pursuant to the
mutually agreed technical specification attached hereto as Exhibit A-3 (the
"Technical Specification").
MILLITECH DELIVERABLES:
. Project Plan
. Critical Design Review Documentation Package
. Four (4) OTRU Engineering Prototype units
. Design Verification Report for Engineering Prototypes
. Ten (10) OTRU Pre-production Units
. Design Verification Report for Pre-production Units
For the purposes of this Statement of Work:
. "Engineering Prototype" shall mean an OTRU which must be functional with
all electrical and mechanical interfaces pursuant to the Technical
Specification. The units are intended for Research and Development use
primarily for integration, functional testing and limited characterization.
Although there may be non-conformance with the Technical Specification, the
Engineering Prototypes must be usable and Millitech must disclose known
problems to Newbridge in the design verification report.
. "Pre-Production Prototype" shall mean an OTRU which is compliant to the
form, fit and function of the Technical Specification of the OTRU. The units
are intended for Field Trial use to enable system testing and
characterization. Although there may be minor parametric non-conformance with
the Technical Specification, the Pre-Production Prototypes must be usable
with the final Product quality OTRU and all non-conformance must be disclosed
to Newbridge in the design verification report. Newbridge would have an
option to purchase Pre-Production units until full production units become
available.
Page 2
The parties shall provide technical information, to each other, which they
believe will be necessary to allow completion of the development activity.
DELIVERY DATE/PERFORMANCE SCHEDULE
Milestones
----------
Delivery Date Owner
------------- -----
1.0 Project Plan [***] Millitech
3.0 Critical Design Review [***] Both
4.0 Delivery of Four (4) Engineering Prototypes [***] Millitech
5.0 Design Verification Report for Eng. Proto. [***] Millitech
6.0 Delivery of ten (10) Pre-Prod. Protos [***] Millitech
7.0 Design Verification Report for Pre-Prod. Proto. [***] Millitech
8.0 Approval of Pre-production Prototypes [***] Newbridge
Millitech shall assume prime project management responsibility for the project.
The Project Managers will create a project plan which shall include milestones
for the deliverables as mutually agreed to by the parties. Millitech shall
provide the necessary bi-weekly update information to allow Newbridge to track
the project.
SPECIFICATIONS FOR SERVICES:
Millitech shall represents and warrants that its deliverables for the Products
and any other items developed pursuant to this Statement of Work shall comply
with and operate in accordance with a mutually agreed- to detailed Technical
Specification.
The parties shall address all technical issues through their respective
technical coordinators. The technical coordinators will be Colin Soul of
Newbridge and Xxx Xxxx of Millitech. Any change of the technical coordinators
would be mutually agreed to by the parties.
AMOUNT PAYABLE FOR SERVICES:
Newbridge shall fund Millitech for the development of the deliverables to a
maximum as provided below:
[***]
[***]
[***] Confidential Treatment Requested.
Page 3
Amounts shall be payable on the [***], as outlined below.
PAYMENT SCHEDULE:
Deliverables Payment (USD)
------------ -------------
[***] [***]
[***] [***]
[***] [***]
[***] [***]
Payment terms shall be net 30 days after receipt of invoice. Invoices shall be
submitted in accordance with the Payment Schedule above.
ACCEPTANCE TEST CRITERIA
The acceptance test of the Engineering and Pre-Production Prototypes will use
the most current revision of the Compliance Matrix as the pass/fail criteria for
such Prototypes and shall be in accordance with the definition of "Engineering
Prototype" and "Pre-Production Prototype" as stated herein. Newbridge may, in
its sole discretion, waive in whole or in part any non-compliance of such
Prototypes.
DISTRIBUTION/RESALE OF DELIVERABLES
Millitech may commercially distribute and resell the Deliverables, provided that
in so doing, it does not disclose any Newbridge Confidential Information [***].
Subject to the foregoing Millitech may disclose the other specifications of the
Deliverables only for the distribution and resale of the Deliverables.
IN WITNESS WHEREOF, the parties have caused this Statement of Work to be
executed by their duly authorized representatives.
Newbridge Networks Corporation Millitech Corporation
By: /s/ Xxxxxx Xxxxx By: /s/ Xxxx X. Xxxxxxxxxx
---------------------------------- ---------------------------
Name: Xxxxxx Xxxxx Name: Xxxx X. Xxxxxxxxxx
-------------------------------- -------------------------
Title: Executive Vice President Title: PRES & CEO
------------------------------- ------------------------
[***] Confidential Treatment Requested.
Page 4
EXHIBIT A-3
STATEMENT OF WORK #3
TECHNICAL SPECIFICATION
[***]
[***] Confidential Treatment Requested.
