PRIVATE LABEL PURCHASE AGREEMENT
This Agreement is entered into between MINNESOTA MINING AND MANUFACTURING
COMPANY acting through its Packaging Systems Division (3M), having its principal
offices at 3M Center, St. Xxxx, Minnesota, and AIR PACKAGING TECHNOLOGIES
INCORPORATED (APTI), a Delaware corporation, with its principal offices at 00000
Xxx Xxxxxx Xxxx, Xxxxxxxx Xxxxxxxxxx 00000-0000.
1. Purpose
APTI manufactures and sells inflatable packaging products and has entered
into a Private Label Purchase Agreement with Minnesota Mining and Manufacturing
Company on behalf of the Stationery Products Division regarding the sale of some
of these products, granting 3M the worldwide exclusive right for the retail
market, the exclusive right for Japan for all markets and a non-exclusive right
for all other markets throughout the world effective September 1, 2000
(hereafter "SPD Agreement"). The SPD Agreement will remain in full force and
effect unless expressly modified herein. 3M is interested in purchasing
additional products from APTI on a private label basis for resale throughout the
world and to obtain exclusive rights for these additional products in the
industrial protective packaging market under the terms and conditions set forth
in this Agreement. APTI is willing to sell the desired products to 3M under the
terms and conditions set forth in this Agreement.
2. Products To Be Sold: Restrictions: New Products
2.1 APTI agrees to sell to 3M and 3M agrees to buy from APTI the private
label inflatable packaging products which are described in the attached Exhibit
A ("STANDARD PRODUCTS") and custom designed products specified by the parties
following the procedure outlined in Exhibit B and to be deemed added to Exhibit
A once specified ("CUSTOM PRODUCTS")(together "PRODUCTS"). Specifications of the
STANDARD PRODUCTS will be agreed to between the parties and delivered to APTI
prior to the commencement of this Agreement. APTI must not change PRODUCTS
without the prior written consent of 3M. If APTI wishes to change a PRODUCT,
then APTI will provide 3M with a written request to change the PRODUCT,
including a description of the proposed change and whether or not the change
would affect the price or performance of the PRODUCT. 3M agrees to inform APTI
concerning whether or not 3M is willing to consent to the change within ninety
(90) days after receipt of the request.
2.2 a. Starting on May 1, 2001, APTI grants 3M, its subsidiaries and
affiliates the exclusive right throughout the world to distribute, sell or
otherwise dispose of all PRODUCTS in the market for industrial protective
packaging, as defined herein (hereinafter "EXCLUSIVE MARKET") and the
non-exclusive right to distribute, sell or otherwise dispose of all PRODUCTS
throughout the world in all other markets. For the purposes of this Agreement,
the market of industrial protective packaging is defined as direct or indirect
sales to small businesses, industrial customers, and logistics companies for
packaging applications, the predominant purpose of which is to protect products
and/or product components against damage during storage or transportation from
the manufacturer throughout the logistics and distribution channel to the
ultimate destination of the product or product component.
b. Notwithstanding the foregoing, APTI shall be entitled to continue to
sell to any existing customer and to any customer whom it was actively
soliciting independently of 3M as of the date on which 3M's exclusive rights
hereunder commenced until the earlier of (i) the date on which 3M's purchases in
any given 12 months period have reached two (2) million dollar worth of PRODUCTS
sold under this Agreement from APTI or (ii) 3M has maintained two years of
exclusivity and the parties have agreed on the business plan for the third year
as outlined in Section 2.3 b.
c. APTI agrees that APTI will not knowingly and intentionally sell PRODUCTS
to any third party for resale into in the EXCLUSIVE MARKET as long as 3M's
exclusive rights exist. If APTI subsequently learns that a customer is selling
PRODUCTS into the EXCLUSIVE MARKET, then APTI agrees to immediately cease
selling PRODUCTS to the customer.
2.3 a. 3M will not be required to purchase any specified quantity of
PRODUCTS from APTI during the Agreement term.
b. On or before March 31st of 2001 and March 31st of each subsequent
calendar year during the Agreement term, 3M will present to APTI a marketing
plan, which explains the actions 3M will take to market PRODUCTS in the
EXCLUSIVE MARKET. APTI will review the plan, taking into account, among others,
the previous year's sales and notify 3M in writing within two weeks after
receiving 3M's plan that APTI accepts the plan as written or APTI wishes to
discuss the plan. If APTI notifies 3M that a plan is accepted, then 3M's
exclusivity with respect to the EXCLUSIVE MARKET will continue during the next
12 months period starting on May 1st of each subsequent calendar year. If APTI
notifies 3M that APTI wishes to discuss a plan, then the parties will meet to
discuss the plan. If the parties are not able to agree upon a marketing plan
that is acceptable to APTI, then 3M's exclusive right for the EXCLUSIVE MARKET
will convert to a nonexclusive right effective as of the date APTI notifies 3M
in writing that the parties were unable to agree upon a marketing plan
acceptable to APTI such notice not to be sent earlier than 30 days after
discussions about the marketing plan have started. APTI agrees that it will not
unreasonably withhold its acceptance of a 3M marketing plan. If 3M loses
exclusivity for the EXCLUSIVE MARKET during the Agreement term, then 3M will not
be obligated to share a marketing plan the following March 31st.
2.4 a. APTI agrees to offer 3M the right to purchase all new inflatable
packaging products which APTI develops or obtains the right to sell from a third
party. If 3M notifies APTI that 3M wishes to add a new product to the Agreement,
then the parties will execute an amendment adding the new product to Exhibit A.
The initial price of the new product will not exceed APTI's manufacturing cost
times 1.5. The initial price will be firm until the end of the twelve month
period during which the new product is added to the Agreement. After this
initial period, the price will be subject to change as provided in Section 3.2
b.
b. If 3M declines to purchase a new product offered by APTI and APTI
subsequently decides to offer the new product at a price lower than the price
offered to 3M, then APTI agrees to give 3M the opportunity to buy the new
product at the reduced price before offering the lower price to any third party.
3. Product Prices: Payment Terms: Price Protection
3.1 a. APTI agrees to initially sell STANDARD PRODUCTS to 3M at the prices
listed in the Price Schedule attached as Exhibit A. Prices for each CUSTOM
PRODUCT will be determined and documented according to the procedure outlined in
Exhibit B. The prices are F.O.B. APTI's Valencia, California facility delivered
to a carrier specified by 3M.
b. APTI and 3M will meet to agree upon the prices which will apply to all
other products which APTI makes and which 3M wishes to buy after this Agreement
has been executed. Once 3M and APTI agree upon the price for a particular
product, the product will be added to Exhibit A in the appropriate section by
both parties initialing an updated version of Exhibit A.
3.2 a. APTI agrees that the prices listed in Exhibit A are firm during the
first twelve months of the Agreement term. Prices for CUSTOM PRODUCTS will be
held firm for a period of 12 months starting from the date when they were added
to Exhibit A.
b. At the beginning of each new twelve months period during the Agreement
term the parties will meet to review the pricing. No overhead or labor cost
increases will be passed on to 3M. APTI will offset any such cost increases
through continuous improvements within APTI's operations. If the prices of the
raw materials used to manufacture each PRODUCT and the packaging supplies used
to package the PRODUCT have increased or decreased during the previous twelve
months of the Agreement term by an amount equal to at least 3% of the total raw
material and packaging supplies costs related to a PRODUCT, then the price of
the affected PRODUCT will be increased or decreased at the end of the twelve
month period by the amount of the raw material and packaging supply price
increase or decrease applicable to the PRODUCT effective as of the first day of
the new twelve month period. The adjusted prices will be firm for the new twelve
month period.
c. The amount of the raw material and packaging supply price increase or
decrease applicable to each PRODUCT will be calculated by taking the prices of
each raw material and packaging supply paid by APTI on the first day of each
month during the preceding twelve months (or the amount paid in the last xxxx
prior to the first day of the month) and calculating an average price. This
average price will be compared to the price of the each raw material and
packaging supply that APTI paid during the first month of the previous twelve
months period. A weighted average calculation will be made to determine whether
or not APTI's total cost or raw materials and packaging supplies for a PRODUCT
has increased or decreased by an amount equal to at least 3% of the total raw
material and packaging supplies costs related to a PRODUCT.
3.3 If APTI sells a PRODUCT at a lower price to any third party, then APTI
agrees to promptly reduce 3M's price and allow 3M to continue paying the reduced
price as long as APTI is selling the PRODUCT at the reduced price to a third
party. Exhibit A will be amended to reflect to the reduced price.
3.4 Payment terms are 2% 10 days net 45 days from the date 3M receives a
copy of the xxxx of lading and a complete and correct invoice for international
shipments and 2% 10 days net 40 days from the date 3M receives a copy of the
xxxx of lading and a complete and correct invoice for US shipments. If 3M's
purchase order or purchase order release contains invoicing instructions, then
APTI agrees to comply with those instructions. Payment of any invoice will not
constitute acceptance of the applicable PRODUCTS. Invoices will be subject to
adjustment for errors, shortages, defects in goods or services, a PRODUCT's
non-compliance with specifications, or other failure of APTI to meet its
requirements under this Agreement.
4. Forecasts: Orders: Shipment: Packaging
4.1 3M will order PRODUCTS either by a) issuing a specific purchase order
listing an order quantity or b) by issuing a blanket purchase order listing a
forecasted quantity which 3M estimates is the maximum quantity 3M will purchase
for each PRODUCT and then order PRODUCTS using purchase order releases. All
blanket purchase orders are for planning purposes only and are not a commitment
to purchase the estimated quantities of PRODUCTS listed in the blanket purchase
order. If any purchase order or blanket purchase order issued pursuant to this
Agreement contains any specific provision inconsistent with this Agreement, then
this Agreement will govern and the inconsistent provision of the purchase order
will be applicable only so far as it is not inconsistent with this Agreement.
4.2 During the term of this Agreement, APTI will accept all purchase orders
and all purchase order releases for STANDARD PRODUCTS tendered by 3M that
conform to the terms of the Agreement and to respond to all custom design
applications as outlined in Exhibit B.
4.3 3M will provide APTI monthly with a six month rolling forecast. The
quantities listed for the first month of each forecast are firm and the
quantities listed for the last five months are a nonbinding estimate unless
expressly agreed upon otherwise between the parties.
4.4 The quantities of STANDARD PRODUCTS ordered in a purchase order or a
purchase order release which are consistent with 3M's forecast will be made
available by APTI for pickup by 3M's carrier within 10 days after receipt of a
purchase order or purchase order release. If 3M orders more than the forecasted
quantity, then APTI agrees to make a good faith effort to deliver the excess
quantities within 30 days after receipt of the purchase order or a purchase
order release. APTI will inform 3M when the ordered quantity is ready for pickup
by 3M's designated carrier. If the purchase order or purchase order release
contains shipping or identification instructions, then APTI agrees to comply
with such instructions.
4.5 APTI agrees to keep in stock at all times a quantity of each STANDARD
PRODUCT equal to 50% of the current monthly forecast and any quantities the
parties might agree upon for individual CUSTOM PRODUCTS.
4.6 All orders will be sent to the following address:
Air Packaging Technologies Incorporated
00000 Xxx Xxxxxx Xxxx
Xxxxxxxx, Xxxxxxxxxx 00000-0000
Attention: Sales Service Manager Fax No (000) 000-0000
4.7 APTI shall bulk package PRODUCTS, at APTI's sole cost, in conformance
with the Packaging Specifications agreed to by the parties. The packaging
keyline art will be supplied by 3M.
4.8 3M has the option of converting ordering to Electronic Data Interchange
(EDI) and converting payment to Electronic Funds Transfer (EFT) technology at
any time during the Agreement term on sixty (60) days prior written notice to
APTI. If 3M exercises this option, then APTI agrees to provide, at no cost to
3M, the necessary electronic data interface to allow for the implementation of
such technology.
4.9 THE PARTIES AGREE THAT TIME AND THE RATE OF DELIVERY ARE OF THE ESSENCE
FOR ALL PURCHASE ORDERS AND PURCHASE ORDER RELEASES PLACED BY 3M UNDER THIS
AGREEMENT
5. Warranty and Limitation of Remedies
5.1 APTI warrants each PRODUCT will be merchantable and will conform to the
agreed upon product and packaging specifications for a period of one year from
the date the PRODUCT is purchased by a user. Acceptance of delivery and
inspection of any PRODUCTS by 3M will not waive any warranties made by APTI.
APTI understands that 3M has relied upon all of these warranties in entering
into this Agreement.
5.2 As the sole remedy to 3M for breach of the foregoing warranties, APTI
agrees to replace, without charge to 3M or its customer, any PRODUCT proved to
be defective within the warranty period or to refund 3M's purchase price at 3M's
option.
5.3 APTI will have the right to evaluate and confirm all alleged defects in
the specified PRODUCT. 3M shall return allegedly defective PRODUCT to APTI at
the address listed on page 1 at APTI'S cost for evaluation by APTI, unless
instructed otherwise by APTI. APTI shall promptly evaluate the allegedly
defective PRODUCT submitted by 3M and communicate the results of APTI's
evaluation to 3M within fourteen (14) days after receipt.
6. Trademarks
6.1 PRODUCTS packaging will bear such trademarks of 3M as 3M shall direct.
APTI's use of 3M's trademarks will be limited to use in connection with the
PRODUCTS sold to 3M pursuant to this Agreement, subject to 3M's prior review and
approval.
6.2 APTI acknowledges that the "3M" corporate symbol trademark and other 3M
trademarks which may be used on PRODUCTS packaging, and the goodwill associated
therewith, are valid throughout the world and are the exclusive property of 3M
and the use of those trademarks on PRODUCTS packaging, and the goodwill created
inures to the benefit of 3M. APTI will not claim any rights in the "3M"
corporate symbol trademark or the type style, or the other 3M trademarks which
3M may use on PRODUCTS packaging, or put in issue either the validity of those
trademarks or the ownership by 3M of those trademarks.
6.3 Upon cancellation or termination of this Agreement, APTI shall not use
the "3M" corporate symbol trademark, or the type style, or the other 3M
trademarks which 3M may use on PRODUCTS packaging or any other confusingly
similar marks.
7. Terms: Termination
7.1 The term of this Agreement will commence as of its execution by both
parties and continue until 3M terminates the Agreement by giving APTI written
notice at least 90 days before the desired termination date.
7.2 Notwithstanding the foregoing language, this Agreement may be
terminated on proper written notice by either of the parties in the event of a
material breach by the other party of its obligations under this Agreement.
Either of the parties intending to terminate the Agreement under this Section
shall give written notice of its intention to do so to the other party stating
its rationale and giving a detailed description of the cause. The party giving
notice shall grant the other party a reasonable period of time (but in no event
more than thirty (30) days) to remedy the cause for termination. During the
grace period, the parties shall make a good faith effort to assist one another
in the remedying of any problems surrounding this Agreement. If the cause for
termination is remedied within the grace period, then this Agreement will remain
in full force and effect.
7.3 Termination of this Agreement will not terminate any obligations set
forth in this Agreement which are incurred prior to such termination.
8. Confidential Information
8.1 APTI acknowledges that during the Agreement term APTI may receive
confidential information related to the subject matter of this Agreement from
3M, including, but not limited to, product specifications, customer information
and sales information. Except as required by law, APTI agrees that during the
term of this Agreement and for three (3) years after the term of this Agreement
APTI shall keep secret all such 3M confidential information and shall use such
care as APTI uses in maintaining the confidentiality of its own secret
information, but not less than a reasonable degree of care. APTI shall use such
3M confidential information only to the extent, for the purpose and in the
course of performing APTI's obligations under this Agreement. Notwithstanding
the foregoing, APTI may disclose the fact that 3M is purchasing PRODUCT from
APTI, the fact that 3M has entered into a purchase Agreement with APTI, and a
summary of the major terms of the Agreement to APTI's
bank and investors; furthermore, APTI may disclose to third parties the
existence and scope of this Agreement after having received 3M's prior written
consent which will not be unreasonably withheld.
8.2 The obligations of confidentiality will not apply to the extent that
any such information:
a. Is known to APTI prior to receipt of the same from 3M as shown by its
written records; or
b. Is disclosed in published form now or in the future in any
publication, or
c. Is or becomes available to APTI from any other source without breach
of Agreement or violation of law; or
d. Is independently developed by APTI as evidenced by its written
records; or
e. Is released in writing from the obligation of confidentiality by 3M.
9. Regulatory Compliance
APTI represents that PRODUCTS have been manufactured and sold in compliance with
all applicable federal, state, and municipal laws, rules and regulations,
including but not limited to those related to environmental concerns and waste
disposal.
10. Inspection
10.1 APTI shall execute at its factory a quality control inspection program
to ensure each lot of PRODUCTS meets the agreed upon product specifications.
APTI shall send 3M a copy of the inspection results and retain samples whenever
requested by 3M. 3M agrees it will not request such results and samples more
than once a month.
10.2 APTI agrees to allow 3M to enter APTI's premises and inspect APTI's
manufacturing operation at any time to allow 3M to confirm that APTI is making
high quality PRODUCTS in compliance with all applicable governmental
regulations.
11. Notice
Any notice, report or communication required or permitted to be given under this
Agreement will be in writing. Notices given will be sent by facsimile or Air
Mail, postage prepaid, addressed as follows unless otherwise specified in this
Agreement:
To 3M: Packaging Systems Division
Minnesota Mining and Manufacturing Company
3M Center, Xxxx. 000-0X-00
Xx. Xxxx, Xxxxxxxxx 00000
Attn: Division Vice President
To APTI: Air Packaging Technologies Incorporated
00000 Xxx Xxxxxx Xxxx
Xxxxxxxx, Xxxxxxxxxx 00000-0000
Attention: President
If either party wishes to change the address where notice is to be sent, the
party shall promptly communicate the desired change in writing to the other
party.
12. Right of First Refusal
12.1 If APTI wishes to sell the assets of the business or the capital stock
of the company, then APTI agrees to give 3M written notice of this desire and
the price at which APTI wishes to sell. 3M must give APTI written notice within
15 days from receipt of APTI's notice indicating whether or not 3M is interested
in purchasing the assets or stock. If 3M indicates it is interested, then the
parties will engage in good faith negotiation to determine whether or not they
can agree upon a purchase price and the conditions of purchase. If the parties
can't agree within 30 days from the date APTI receives 3M's notice, then APTI
may offer the assets or stock to other parties subject to the limitations listed
below:
12.2 If APTI receives a bone fide offer to sell or otherwise dispose of
substantially all of the assets of the business or the capital stock of the
company and APTI decides it is willing to consider such an offer, then APTI
agrees to give 3M written notice that APTI has received an offer and is willing
to consider an offer. 3M must give APTI written notice within 15 days from
receipt of APTI's notice indicating whether or not 3M is interested in
purchasing the assets or stock. If 3M indicates it is interested, then the
parties will engage in good faith negotiation to determine whether or not they
can agree upon a purchase price and the conditions of purchase. If the parties
can't agree within 30 days from the date APTI receives 3M's notice, then APTI
may offer the asset or stock to the other party who submitted the offer to APTI.
12.3 The rights granted to 3M in this Section 12 are identical with and are
not in addition to the ones granted to 3M under the SPD Agreement.
13. Stock Warrants
APTI agrees that the definition of PRODUCTS as used in Section 13 of the SPD
Agreement and the warrants attached as Exhibits E, F and G will not only include
PRODUCTS covered by the SPD Agreement but also PRODUCTS covered by this
Agreement. This Section 13 and Section 13 of the SPD Agreement shall survive
termination of either Agreement as long as at least one Agreement is still in
force.
14. Force Majeure
If either party is unable to perform its obligations, either in whole or in
part, under this Agreement as a result of civil or military authority, war,
flood, fire, epidemic, or other Act of God, or any other condition or cause
beyond its reasonable control not due to its fault or negligence (a "Force
Majeure"), the affected party will be excused from such performance during the
continuance of any such event to the extent that the party is prevented or
delayed thereby. If any APTI delay is caused by non-performance of APTI's
subcontractor or supplier, this will be a Force Majeure only if the goods or
services to be furnished by such entity were not obtainable from other
source(s). During any Force Majeure period, APTI will allocate any available
goods for delivery in any manner that is fair and reasonable consistent with the
provisions of Section 2-615 of the Uniform Commercial Code.
15. Assignment
This Agreement, any rights or benefits or duties hereunder will not be
assignable by either party without the prior written consent of the other party.
16. Relationship of Parties
3M and APTI do not in any way or for any purpose intend to become partners in
the conduct of a business or otherwise, or joint venturers, or members of a
joint enterprise under this Agreement. The relationship will be one of
manufacturer and purchaser. Neither party will have any authority to obligate,
or to otherwise act as representative of, or agent for, the other party for any
purpose, and neither party will make any representations or hold itself out as
having such authority.
17. Partial Invalidity
In case of partial invalidity of this Agreement, the rest of the Agreement will
remain in effect and will be enforced.
18. Dispute Resolution Procedures
18.1 The parties agree to resolve any questions, claims or disputes arising
from or relating to this Agreement or its negotiation or termination by the
following sequence of dispute resolution methods. Except as otherwise provided
in Section 18.1.d below, these methods are exclusive and will be fully exhausted
before the commencement of any litigation.
a. Negotiation. The parties shall attempt in good faith to resolve any such
questions, claims, or disputes promptly by negotiations between executives who
have authority to settle the matter within fifteen (15) days of a party's
written request for a meeting, which will include a detailed written explanation
of the question, claim, or dispute and a proposed resolution. Such negotiations
will be held at a mutually acceptable time and location, and as often thereafter
as the parties deem reasonably necessary to exchange information and to attempt
to resolve the matter.
If the parties are not able to resolve the matter within forty-five (45) days of
the parties' first meeting to attempt to resolve the matter, then either party
will initiate mediation of the matter as provided in Section 18.1.b below. If an
executive participating in such negotiations intends to be accompanied by an
attorney, then the other executive(s) will be given at least three (3) working
days' notice of such intention and may also be accompanied by an attorney. All
negotiations pursuant to this Section 18.1.a are confidential and will be
treated as compromise and settlement negotiations for purposes of the Federal
Rules of Evidence and state rules of evidence, and each party will bear its own
costs incurred in connection with such negotiations.
b. Mediation. If the question, claim, or dispute has not been resolved by
negotiation pursuant to Section 18.1.a above, then the parties will attempt to
resolve the matter by non-binding mediation. Such mediation will be conducted at
a mutually acceptable time in a mutually accepted location, using a neutral
mediator having experience with the industry in accordance with the rules of The
Center for Public Resources. Mediation pursuant to this Section 18.1.b is
confidential and will be treated as compromise negotiations for purposes of the
Federal Rules of Evidence and state rules of evidence, and each party will bear
its own costs incurred in and share equally the costs of such mediation.
c. Litigation. If the parties cannot resolve the question, claim or dispute
as provided above, then, as a last resort, either party may commence litigation;
provided, however, that any lawsuit filed by APTI against 3M must be commenced
in a federal or state court of competent jurisdiction in Xxxxxx County,
Minnesota and any lawsuit filed by 3M against APTI must be commenced in a
federal or state court of competent jurisdiction in the county where APTI's
principal office is located.
d. Equitable Relief. Nothing in this Section 18.1 will preclude either
party from taking any action necessary to prevent immediate and irreparable harm
to it.
18.2 THE PARTIES FURTHER HEREBY CONSENT TO WAIVER OF ANY CONSTITUTIONAL,
STATUTORY OR COMMON LAW RIGHT OF TRIAL BY JURY.
19. Choice of Forum
The parties agree that Minnesota and California each have a substantial
relationship to this transaction, and each party consents to personal
jurisdiction in the courts thereof, consistent with Section 18. Any action or
suit arising from or related to this Agreement must only be brought by the
parties in any federal or state court with appropriate jurisdiction over the
subject matter established or sitting in the states of Minnesota or California.
20. Nonwaiver, Modifications
20.1 Failure by either party to require strict performance of this
Agreement shall not be a waiver of a party's right subsequently to require such
strict performance.
20.2 No change or modification of this Agreement will bind the parties
unless it is in writing signed by their respective authorized representatives.
21. License to Manufacture and Sell
21.1 If APTI is unable to meet its delivery obligations for PRODUCTS as
defined in Section 4.4 above during any three month period, APTI agrees to grant
and does hereby grant to 3M a license under any intellectual property rights
(including all patents, trade secrets, and know-how) owned or controlled by APTI
to the extent necessary for 3M to make, have made, sell, offer to sell, or
import PRODUCTS. The terms of such a license will be agreed to by APTI and 3M
and will be commercially reasonable within the industry, but in no event shall
the royalty rate exceed five percent (5%) of 3M's net sales price of PRODUCTS
sold in countries where such PRODUCTS are covered by a granted, enforceable, and
unexpired patent that describes and claims such licensed PRODUCTS. If the
licensed PRODUCTS are covered only by trade secrets and how-how, the royalty
rate shall not exceed two percent (2%) of 3M's net sales price of licensed
PRODUCTS. APTI will provide technical assistance and documentation to 3M
(including know-how) , as 3M may request, so that 3M can make or have made the
PRODUCTS.
21.2 If APTI executes the license because of the occurrence of the event
described in Section 21.1, and subsequently can prove to 3M's reasonable
satisfaction that it has developed the capability to consistently meet its
delivery obligations, then APTI may give 3M written notice that it is able and
willing to meet those delivery obligations.
After receipt of such written notice from APTI, 3M agrees to stop making or
having made by a third party the applicable PRODUCT within three (3) months
after receipt of APTI's notice and the license will be revoked no later than the
end of the three month period. 3M will have the right to sell and use all
quantities of the PRODUCT made during the time period the license was in effect.
It is agreed that this Section will not apply unless APTI provides 3M with the
required written notice within twelve (12) months after the effective date of
the license.
21.3 If the license is executed, the license is subsequently revoked as
provided in Section 21.2 above and then the license must be executed again
because one of the events described in Section 21.1 occurs, it is agreed that
Section 21.2 will not apply again.
22. Bailment of Stock; Work-In Process; Finished Products
22.1 a. While this Agreement is in effect, 3M may provide to APTI the film
(BAILMENT STOCK) needed to manufacture the PRODUCTS. If 3M notifies APTI that 3M
wishes to provide the BAILMENT STOCK, then APTI will be responsible for making
timely release requests to ensure APTI's inventory of BAILMENT STOCK does not
fall below the level necessary to provide timely delivery of PRODUCTS to 3M.
b. APTI will visually inspect all BAILMENT STOCK received from 3M or 3M's
vendors using visual standards supplied by 3M. All BAILMENT STOCK failing
the inspection test will be held for pickup by 3M. 3M will arrange for pickup of
failed BAILMENT STOCK within fourteen (14) days after receipt of written notice
from APTI.
22.2 a. APTI will keep BAILMENT STOCK at its manufacturing facility or
warehouse and will not relocate any BAILMENT STOCK without 3M's prior written
approval.
b. APTI will use the BAILMENT STOCK only to perform work for 3M.
c. APTI will keep the BAILMENT STOCK segregated from any inventory of APTI
through the use of special labeling.
d. APTI will store the BAILMENT STOCK in a dry storage area which will have
a temperature of 60(degree)f - 180(degree)f and a relative humidity of 30% -
90%.
22.3 The BAILMENT STOCK, work-in-process and finished PRODUCTS will remain
at all times 3M property. APTI will not pledge or mortgage any of the BAILMENT
STOCK, work-in-process or finished PRODUCTS. APTI will not do or omit to do
anything which might encumber or threaten to encumber 3M's ownership rights in
the BAILMENT STOCK, work-in-process or finished PRODUCTS. APTI agrees to
execute, upon request, a UCC-1 Financing Statement for filing by 3M to record
3M's ownership rights.
22.4 a. If APTI's waste of film during any month is higher than 10%, then
APTI will reimburse 3M for the excess waste at the excess waste charge of $.20
per square yard. The parties will review the waste percentage quarterly.
b. Waste of BAILMENT STOCK will be calculated by subtracting the total
square yards of finished PRODUCTS produced during a month from the total square
yards of BAILMENT STOCK used to produce those finished PRODUCTS. Production
quantities will be recorded by filling out the production report provided by 3M
after each production run. APTI will also report monthly inventory balances for
BAILMENT STOCK. APTI will send the reports to 3M on the last day of each month.
APTI will also submit a monthly waste report using a mutually agreed upon
format.
c. Where APTI can show that 1) waste is the direct result of a failure of
BAILMENT STOCK to meet 3M's specifications and 2) the failure to comply with
3M's specifications is due to a defect in the BAILMENT STOCK which was not
discoverable by APTI through the use of reasonable care, such waste will not be
counted when calculating APTI's actual waste percentages for the purposes of
this Section 22.4.
d. At the end of each month 3M will calculate the amount due to 3M under
Section 22.4.a above and send APTI a statement showing the amount due. If APTI
owes 3M an amount, then 3M will at its option either deduct the amount from
payments due to APTI or invoice APTI for the amount. If 3M invoices APTI, then
APTI shall pay the amount due within thirty (30) days after receiving the
invoice.
22.5 When this Agreement expires or terminates (regardless of cause), APTI
will immediately make available to 3M all BAILMENT STOCK and any other property
belonging to 3M and stored at APTI's premises or under APTI's control. If APTI
does not immediately make that property available to 3M, then 3M may take all
action permitted by law to immediately recover the property and APTI will on
demand reimburse 3M for all actual and reasonable costs 3M incurs in recovering
the property (including reasonable attorney's fees and other expenses of
litigation).
22.6 APTI will dispose of BAILMENT STOCK waste by incineration or by burial
in a covered landfill site in compliance with all applicable local, state and
federal laws and regulations.
22.7 APTI has full risk of loss as to any BAILMENT STOCK on APTI's premises
or under APTI's control. The total value of the BAILMENT STOCK may reach
$150,000.00 and APTI will insure the BAILMENT STOCK up to that value for all
times during which that property is within APTI's possession or control. The
policy must name 3M as an additional insured as 3M's interest may appear. The
insurance must be primary for 3M regardless of any other coverage which 3M may
have available.
23. Infringement of Third Party Rights
23.1 APTI shall indemnify, defend and hold 3M harmless from any liability
for any injury, loss, damage, cost or expense (including reasonable attorneys
fees) caused by or resulting from any third party claim, action, suit or
proceeding involving PRODUCTS, which claim, action, suit or proceeding is based
on actual or alleged infringement, wrongful use or misappropriation of such
third party's patent, trademark, copyright or trade secret rights by PRODUCT. 3M
shall give APTI notice of any such claim, action, suit or proceeding. 3M shall
have the option to join such claim, action, suit or proceeding and be
represented by attorney(s) of its own choosing, at 3M's cost.
23.2 APTI shall main in full force and effect, so long as this Agreement
remains in effect and for three (3) years thereafter, comprehensive general and
commercial liability insurance, including coverage for the liabilities expressed
in Section 23.1, waiving subrogation with combined single limits of no less than
four million dollars ($4,000,000). Contemporaneously with the execution of this
Agreement, APTI shall deliver to 3M a certificate or certificates evidencing the
required coverage and indicating that 3M will receive written notice of
cancellation, non-renewal or of any material change in the coverage least thirty
days prior to the effective date thereof. Insurance shall be carried by an
insurer with a BEST rating of B+V or above. Compliance with Section 23.2 in no
way limits APTI's indemnity obligations, except to the extent that APTI's
insurance company actually pays amounts which are owed.
24. Entire Agreement
This Agreement constitutes the entire Agreement between the parties
relating to the matters set forth herein and supersedes all prior Agreements
except for the SPD Agreement, whether written or oral, and all other
communications between the parties relating to the subject matter of this
Agreement.
The parties have confirmed this Agreement by having their duly authorized
representatives execute both copies of this Agreement in the spaces provided
below. For reference purposes the date of this Agreement will be the date it is
executed by 3M.
MINNESOTA MINING AND AIR PACKAGING TECHNOLOGIES
MANUFACTURING COMPANY INCORPORATED
By: /s/ Xxxx X. Xxxx By: /s/ Xxxxxx Xxxxxxxx
---------------------------- -----------------------------
Xxxx X. Xxxx Print name: Xxxxxx Xxxxxxxx
Division Vice President Title: President
Packaging Systems Division
Date: 2/26/01 Date 2/26/2001
---------------------------- -----------------------------
