PORTIONS OF THIS AGREEMENT WERE OMITTED AND HAVE BEEN FILEDMaster Products and Services Agreement • January 30th, 2019 • Itamar Medical Ltd. • Surgical & medical instruments & apparatus • New York
Contract Type FiledJanuary 30th, 2019 Company Industry JurisdictionThis MASTER PRODUCTS AND SERVICES AGREEMENT (“Agreement”) is made and entered into as of this 16 day of August 2007 (the “Effective Date”) by and between KAISER FOUNDATION HEALTH PLAN, INC., a California nonprofit public benefit corporation (“Customer”) and Itamar Medical Inc, a Delaware Corporation (“Supplier”), having its principal place of business at 160 Speen St. Framingham, MA, and remains in effect for 2 years commencing on the Effective Date and expiring on August 15, 2009 unless terminated or extended as provided herein (the “Term”). Customer and Supplier agree as follows:
EX-10.8 6 d535234dex108.htm EX-10.8 GE DIGITAL MASTER PRODUCTS AND SERVICES AGREEMENT dated as of [●], 2017 between GE DIGITAL LLC and BAKER HUGHES OPERATING CO., LLC Page Page 2 of 42 Page 3 of 42 SCHEDULES SCHEDULE 2.01(a) GE Digital Offerings...Master Products and Services Agreement • May 5th, 2020
Contract Type FiledMay 5th, 2020This GE Digital Master Products and Services Agreement (“Agreement”) is entered into by and between GE Digital LLC, having its place of business at 2623 Camino Ramon, San Ramon, CA 94583 (“GE Digital”) and [Baker Hughes Operating Co., LLC], having a place of business at [●] (“Baker Hughes”), on this [●] (the “Effective Date”).
Master Products and Services AgreementMaster Products and Services Agreement • January 10th, 2024 • Delaware
Contract Type FiledJanuary 10th, 2024 JurisdictionThis Master Product and Services Agreement (“Agreement”) is made as of the date of execution of the Order Form (the “Effective Date”), by and between AEM Commercial, Inc., a Delaware corporation with its principal place of business located at12410 Milestone Center Drive, Suite 300, Germantown, MD 20876, and its
Master Products and Services Agreement betweenMaster Products and Services Agreement • February 10th, 2020 • Delaware
Contract Type FiledFebruary 10th, 2020 JurisdictionThis Agreement shall commence on the Effective Date and continue for/until: 5 Years (“Initial Term”). At the end of the Initial Term, this Agreement shall automatically renew for an additional term of 5 years (“Renewal Term”), provided that either party may terminate this Agreement by providing the other party with written notice of its desire not to renew the Agreement at least one hundred twenty (120) days before the end of the Initial Term. The “Term” shall refer to both the Initial Term and, if applicable, the Renewal Term.
MASTER PRODUCTS AND SERVICES AGREEMENTMaster Products and Services Agreement • September 6th, 2023 • Utah
Contract Type FiledSeptember 6th, 2023 JurisdictionThis Master Products and Services Agreement (this “MSA”) is the governing document for the transactions between OptConnect Management LLC (“OptConnect”) and its customer designated below or in an accompanying Customer Order (the “Customer”) who is purchasing, renting or using the products and services offered by OptConnect.
PLEASE READ THIS ENTIRE DOCUMENT CAREFULLY AS IT AFFECTS YOUR RIGHTS, RESPONSIBILITIES AND SERVICES RENDERED PURSUANT HERETO:Master Products and Services Agreement • January 19th, 2024 • New York
Contract Type FiledJanuary 19th, 2024 JurisdictionTHIS MASTER PRODUCTS AND SERVICES AGREEMENT (“Agreement”) is made and entered into by and between Reflected Networks, LLC, a Delaware limited liability company (“RN”), located at 738 Main Street #195, Waltham, MA 02451 and (“Customer”) a corporation, effective as of (“Effective Date”). RN and Customer are sometimes referred to as the “parties” and individually as a “party”. Customer’s use of and access to RN’s Products and/or Services (defined, infra) is governed by this Agreement, including RN’s Acceptable Use Policy, Privacy Policy and the terms and conditions contained in any other Appendix/Appendices (including terms related to Service Level) and/or Order Form(s) (all of which are collectively referred to as the “Agreement”). This Agreement represents the complete and exclusive agreement between RN and Customer regarding RN’s Products and/or Services and related subject matter and supersedes and replaces any understanding, communication, or agreement, whether written or oral, prior
AMENDMENT #2 TO MASTER PRODUCTS AND SERVICES AGREEMENTMaster Products and Services Agreement • August 13th, 2020 • DecisionPoint Systems, Inc. • Services-computer programming, data processing, etc.
Contract Type FiledAugust 13th, 2020 Company IndustryThis Amendment # 2 (“Amendment #2”) to the MASTER PRODUCTS AND SERVICES AGREEMENT, effective as of the 1st day of January 2017, and as previously amended as of the 15th day of August 2019 (the “Agreement”), is between KAISER FOUNDATION HEALTH PLAN, INC. (“Kaiser”) and DECISIONPOINT SYSTEMS, INC. (“Supplier”), Successor in Interest to ROYCE DIGITAL SYSTEMS, INC.. This Amendment #2 is effective on April 1, 2020 (the “Amendment #2 Effective Date”). Unless otherwise defined in this Amendment #2, capitalized terms used in this Amendment #2 shall have the meanings given to such terms in the Agreement.
AgreementMaster Products and Services Agreement • March 7th, 2019 • Texas
Contract Type FiledMarch 7th, 2019 JurisdictionThis Master Products and Services Agreement (the “Agreement”) is made and entered into this Click or tap to enter a date., ("Effective Date") by and between GENERAL DATATECH, L.P. (“General Datatech”) for the benefit of itself and its affiliates
Master Products and Services AgreementMaster Products and Services Agreement • May 30th, 2018 • New York
Contract Type FiledMay 30th, 2018 JurisdictionThis Agreement (which includes and incorporates by reference Sales Orders attached and any Service Agreement Addendums) sets forth the terms under which the parties agree that Hudson Valley Host shall provide certain services to Customer according to the following specifications:
MASTER PRODUCTS AND SERVICES AGREEMENTMaster Products and Services Agreement • September 24th, 2018 • Illinois
Contract Type FiledSeptember 24th, 2018 JurisdictionThese General Terms and Conditions together with all Supplements, Order Form(s), Exhibits and other addenda attached hereto from time to time constitute the Master Products and Services Agreement (“Agreement”) which is effective as of the last date of execution on the AirCell Order Form (“Effective Date”) by and between AirCell, Inc.
ContractMaster Products and Services Agreement • July 5th, 2012
Contract Type FiledJuly 5th, 2012Hong Kong Exchanges and Clearing Limited and The Stock Exchange of Hong Kong Limited take no responsibility for the contents of this announcement, make no representation as to its accuracy or completeness and expressly disclaim any liability whatsoever for any loss howsoever arising from or in reliance upon the whole or any part of the contents of this announcement.
MASTER PRODUCTS AND SERVICES AGREEMENTMaster Products and Services Agreement • September 10th, 2007 • California
Contract Type FiledSeptember 10th, 2007 JurisdictionWHEREAS, WildPackets is in the business of, developing, licensing and supporting certain computer software and hardware products (“Products”), and providing training and advisory services to support such Products; and
MASTER PRODUCTS AND SERVICES AGREEMENTMaster Products and Services Agreement • June 5th, 2020 • California
Contract Type FiledJune 5th, 2020 JurisdictionThese General Terms and Conditions together with all Supplements, Order Form(s), Exhibits and other addenda attached hereto from time to time constitute the Master Products and Services Agreement (“Agreement”) which is effective as of the last date of execution below (“Effective Date”) by and between Race Telecommunications, Inc.. (“Race”), a California corporation, and Customer. Race and Customer are collectively referred to as the “Parties” or individually as a “Party”.
MASTER PRODUCTS AND SERVICES AGREEMENTMaster Products and Services Agreement • January 28th, 2022 • New Jersey
Contract Type FiledJanuary 28th, 2022 JurisdictionThese General Terms and Conditions, together with all Order(s), applicable Service Guide(s), exhibits and other addenda attached hereto from time to time, collectively constitute the Master Products and Services Agreement (“Agreement”) which is effective as of the last date of execution below (“Effective Date”) by and between Ancero LLC, a New Jersey limited liability company (“Ancero”), on the one hand, and Customer, on the other hand. Ancero and Customer are collectively referred to herein as the “Parties” or individually as a “Party”.
Master Products and Services AgreementMaster Products and Services Agreement • November 7th, 2020 • New York
Contract Type FiledNovember 7th, 2020 JurisdictionThis Agreement (which includes and incorporates by reference Sales Orders attached and any Service Agreement Addendums) sets forth the terms under which the parties agree that ColoCrossing shall provide certain services to Customer according to the following specifications:
Master Products and Services AgreementMaster Products and Services Agreement • May 30th, 2018 • New York
Contract Type FiledMay 30th, 2018 JurisdictionThis Agreement (which includes and incorporates by reference Sales Orders attached and any Service Agreement Addendums) sets forth the terms under which the parties agree that Chicago VPS shall provide certain services to Customer according to the following specifications:
MASTER PRODUCTS AND SERVICES AGREEMENTMaster Products and Services Agreement • April 5th, 2012 • New York
Contract Type FiledApril 5th, 2012 JurisdictionThese General Terms and Conditions together with all Order Form(s), Supplements and other addenda and service-specific terms and conditions attached hereto from time to time constitute the Master Products and Services Agreement (“Agreement”) which is effective
MASTER PRODUCTS AND SERVICES AGREEMENTMaster Products and Services Agreement • August 3rd, 2022 • Maryland
Contract Type FiledAugust 3rd, 2022 JurisdictionWHEREAS Partner is primarily engaged in the business of providing healthcare related resources and desires to benefit from Company’s expertise in Veteran and Military Population Health education, data science and marketing and Company is willing to provide certain products and related services to Partner on the terms and under the conditions of this Agreement.
ContractMaster Products and Services Agreement • January 14th, 2020 • Itamar Medical Ltd. • Surgical & medical instruments & apparatus • California
Contract Type FiledJanuary 14th, 2020 Company Industry JurisdictionIn compliance with Regulation S-K Item 601(b)(10)(iv), certain identified information has been excluded from this exhibit because it is both not material and would likely cause competitive harm to the registrant if publicly disclosed CONTRACT NO. 5881 MASTER PRODUCTS AND SERVICES AGREEMENT This MASTER PRODUCTS AND SERVICES AGREEMENT ("Agreement") is made and entered into as of this 1st day of April 2019 (the "Effective Date") by and between KAISER FOUNDATION HEALTH PLAN, INC. ("Kaiser") and ltamar Medical Inc. ("Supplier"). This Agreement commences on the Effective Date and expires on March 315 \ 2022,unless terminated or extended as provided herein (the "Term"). Kaiser and Supplier agree as follows: 1. DEFINITIONS 1.1 "Acceptance" means a Customer' s verification that the Product and/or Service conforms to the Specifications,is ready for commercial use and all required documentation has been delivered. 1.2 "Customer" means any KP Entity purchasing Products under this Agreement. 1.3 "C
MASTER PRODUCTS AND SERVICES AGREEMENTMaster Products and Services Agreement • October 1st, 2021 • Massachusetts
Contract Type FiledOctober 1st, 2021 JurisdictionTHESE MASTER PRODUCTS AND SERVICES TERMS AND CONDITIONS GOVERN CUSTOMER’S ACQUISITION AND USE OF COMPUTACENTER UNITED STATES INC. (“PROVIDER”) SERVICES AND DELIVERABLES.
MASTER PRODUCTS AND SERVICES AGREEMENTMaster Products and Services Agreement • May 28th, 2019 • California
Contract Type FiledMay 28th, 2019 JurisdictionThis Master Products and Services Agreement (the "Master Agreement" or this “Agreement”) constitutes the terms and conditions on which Netradyne, Inc., a Delaware corporation with offices located at 9191 Towne Centre Dr Suite 200, San Diego, CA 92122 and/or its suppliers/licensors (collectively, as applicable, "Netradyne") provide the software licenses, hardware, warranty coverage and other services purchased by an end-user, customer, or other entity (“you” or “Customer”) directly from Netradyne or through a Netradyne authorized distributor or reseller (each a "Party," and collectively, the "Parties"). Your rights and Netradyne’s and its suppliers’/licensors’ obligations hereunder, are conditioned upon your payment of all applicable license fees, subscription fees, and other payments due in connection with your license and/or purchase as well as your compliance with the terms and conditions set forth in this and other agreements with Netradyne.
Customer”), a (entity type) in the State of .Master Products and Services Agreement • April 23rd, 2021 • California
Contract Type FiledApril 23rd, 2021 JurisdictionThese General Terms and Conditions together with all Order Form(s), Supplements and other addenda and service-specific terms and conditions attached hereto from time to time constitute the Master Products and Services Agreement (“Agreement”) which is effective as of (“Effective Date”) (the date of execution by both parties below) by and between StreamGuys, Inc. d/b/a/ StreamGuys (“SG” or “StreamGuys”), a California corporation, and Customer. SG and Customer are collectively referred to as the "Parties" or individually as a “Party”.
AMENDED AND RESTATED GE DIGITAL MASTER PRODUCTS AND SERVICES AGREEMENT dated as of November 13, 2018 between GE DIGITAL LLC and BAKER HUGHES, A GE COMPANY, LLCMaster Products and Services Agreement • November 13th, 2018 • BAKER HUGHES a GE Co LLC • Oil & gas field machinery & equipment
Contract Type FiledNovember 13th, 2018 Company IndustryThis Amended and Restated GE Digital Master Products and Services Agreement (“this Agreement”) is entered into by and between GE Digital LLC, having its place of business at 2623 Camino Ramon, San Ramon, CA 94583 (“GE Digital”) and Baker Hughes, a GE company, LLC, a Delaware limited liability company (“Baker Hughes”), on this November 13, 2018.
Master Products and Services AgreementMaster Products and Services Agreement • August 16th, 2024 • Ontario
Contract Type FiledAugust 16th, 2024 JurisdictionThis Master Products and Services Agreement (“Agreement”) shall take effect upon the execution of a Sales Order (the "Effective Date") by HostPapa, Inc., doing business as ColoCrossing, along with its affiliates (collectively referred to herein as "ColoCrossing"), and the organization whose authorized representative has executed the Sales Order, ("Customer"), each being a “Party”, and collectively the “Parties”.
MASTER PRODUCTS AND SERVICES AGREEMENTMaster Products and Services Agreement • January 29th, 2022 • Illinois
Contract Type FiledJanuary 29th, 2022 JurisdictionThese General Terms and Conditions together with all Order Form(s), Exhibits and other addenda attached hereto from time to time constitute the Master Products and Services Agreement (“Agreement”) which is effective as of
SBFN PRODUCTS AND SERVICES SUPPLEMENTMaster Products and Services Agreement • June 5th, 2020
Contract Type FiledJune 5th, 2020This is a Supplement to that certain Master Products and Services Agreement (“Agreement”) entered into by and between Race Telecommunications, Inc.. (“Race”), a California corporation, and Customer, effective as of its Effective Date. Race and Customer are collectively referred to as the “Parties” or individually as a “Party”.
MASTER PRODUCTS AND SERVICES AGREEMENTMaster Products and Services Agreement • February 20th, 2017 • California
Contract Type FiledFebruary 20th, 2017 JurisdictionThis MASTER PRODUCTS AND SERVICES AGREEMENT (the “Agreement”) is entered into and made effective on (the “Commencement Date”), between Entisys360, A Division of Entisys Solutions, Inc, (DBA “Entisys360”) having its principal place of business at 1855 Gateway Blvd. Suite 730, Concord, CA, 94520, a California Corporation (“Entisys360”) and the client identified below (“Client”):