ADM Milling definition

ADM Milling shall have the meaning set forth in the preamble to this Agreement.
Sample 1Sample 2Sample 3
ADM Milling is defined in the first paragraph of this Agreement.
Sample 1

Examples of ADM Milling in a sentence

  • This work will be performed in accordance with the terms of an engineering, procurement, and construction agreement by and among the NYISO, Transmission Developer, and ADM Milling.

  • The Transmission Interconnection Studies for the Transmission Project identified that certain Network Upgrade Facilities at the ADM Milling Substation are required in connection with the Transmission Project.

  • If ADM Milling is unable to complete the ADM Milling Work within the time periods specified in Exhibit C, ADM Milling shall notify the Company of such delay and the reason(s) why additional time is required, and shall provide a revised estimate of when the ADM Milling Work can be completed.

  • The Parties acknowledge that the ADM Milling Work shall be limited to the provision of existing drawings, schematics, specifications, criteria and data related to the Transmission Project (specifically related to the ADM Milling substation), and that the Company’s Contractor shall be responsible for performing any and all engineering design, procurement and construction of the Transmission Project, including any modifications to the ADM Milling substation at the cost of the Company.

  • ADM Milling shall provide to the Company an itemized monthly invoice for any ADM Milling Work performed during the previous 30-day period, as necessary.

  • ADM Milling shall use reasonable efforts to cooperate with the Company’s development and financing of the Transmission Project by: (a) providing status updates and other information reasonably requested by the Company regarding ADM Milling’s performance of the ADM Milling Work; and (b) providing information reasonably requested by the Company to facilitate the financing of the Transmission Project; provided, however, that this Article 23 shall not require ADM Milling to incur any costs or expenses.

  • All work pertaining to the ADM Milling Work that is the subject of this Agreement will be approved by and coordinated only through designated and authorized representatives of the Company and ADM Milling (“Representative”).

  • Unless the Company elects to self- insure, the Company shall have its insurer furnish to ADM Milling certificates of insurance, on forms approved by the Insurance Commissioner of the State of New York, evidencing the insurance coverage required by this Article, such certificates to be provided prior to the commencement of any ADM Milling Work under this Agreement.

  • The Company shall pay such invoice within thirty (30) days of receipt from ADM Milling.

  • The Parties acknowledge and agree that the Company shall be responsible for any reasonable costs incurred by ADM Milling to minimize substation outages or downtime during the substation modifications (including without limitation the costs incurred by ADM Milling to rent, install, operate and remove a generator, if needed).

Related to ADM Milling

  • Ethanol means a high octane gasoline blend stock that is used to make various grades of gasoline.

  • Refinery means a facility used to produce motor fuel from crude oil, unfinished oils, natural gas liquids, or other hydrocarbons and from which motor fuel may be removed by pipeline, by marine vessel, or at a rack.

  • Refiner means any person who owns, operates, or otherwise controls a refinery.

  • Ethanol blended gasoline means the same as defined in section 214A.1.

  • Production Facilities (7 9) means "production equipment" and specially designed software therefor integrated into installations for "development" or for one or more phases of "production".

  • Production facility means a facility in California at which gasoline or CARBOB is produced. Upon request of a producer, the executive officer may designate, as part of the producer's production facility, a physically separate bulk storage facility which (A) is owned or leased by the producer, and (B) is operated by or at the direction of the producer, and (C) is not used to store or distribute gasoline or CARBOB that is not supplied from the production facility.

  • Water supply system means a water distribution system, piping, connection fittings, valves and appurtenances within a building, structure, or premises. Water supply systems are also referred to commonly as premise plumbing systems.

  • Cogeneration facility means a power plant in which the heat or steam is also used for industrial or commercial heating or cooling purposes and that meets Federal Energy Regulatory Commission standards for qualifying facilities under the Public Utility Regulatory Policies Act of 1978 (16

  • Postproduction means an activity related to the finishing or duplication of a medium described in Subsection 59-12-104(54)(a).

  • Cannabis processing facility means a person that:

  • Refining means removing or separating a desirable product from raw or contaminated materials by distillation or physical, mechanical, or chemical processes.

  • Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.

  • Project Water means water made available for delivery to the contractors by project conservation facilities and the transportation facilities included in the System.

  • generating plant means the generating facility described in Schedule 1 as amended from time to time;

  • cogeneration means the simultaneous generation in one process of thermal energy and electrical or mechanical energy;

  • LNG means liquefied natural gas.

  • Fabrication means making up data or results and recording or reporting them.

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per million.

  • Dewatering means the removal of water for construction activity. It can be a discharge of appropriated surface or groundwater to dry and/or solidify a construction site. It may require Minnesota Department of Natural Resources permits to be appropriated and if contaminated may require other MPCA permits to be discharged.

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • generation facility means a facility for generating electricity or providing ancillary services, other than ancillary services provided by a transmitter or distributor through the operation of a transmission or distribution system, and includes any structures, equipment or other things used for that purpose;

  • licensed water supplier means a company which is the holder for the time being of a water supply licence under Section 17A(1) of the 1991 Act(f);

  • Cannabis production establishment agent means a cannabis cultivation facility

  • AES means the Advanced Encryption Standard, a specification of Federal Information Processing Standards Publications for the encryption of electronic data issued by the National Institute of Standards and Technology (xxxx://xxxxxxx.xxxx.xxx/nistpubs/FIPS/NIST.FIPS.197.pdf).

  • Generating Facility means the Generating Unit(s) comprising Seller’s power plant, as more particularly described in Section 1.02 and Exhibit B, including all other materials, equipment, systems, structures, features and improvements necessary to produce electric energy and thermal energy, excluding the Site, land rights and interests in land.

  • Process Gas means gas used for which alternate fuels, other than another gaseous fuel, are not technically feasible such as in applications requiring precise temperature controls and precise flame characteristics.