High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).
Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.
Calibration gas means a gas mixture used to calibrate gas analysers.
Configuration means State-specific changes made to the Software without Source Code or structural data model changes occurring.
medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV to 44 kV;
Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.
HVAC System is defined in Section 6.10(a)(v).
Alarm system means equipment and devices assembled for the purpose of:
Fire alarm system means a system designed to detect and annunciate the presence of fire, or by-products of fire. Fire alarm system includes smoke detectors.
Air Conditioning System Is cooling supplied to all finished rooms? Yes No Unknown Does Not Apply Comments: Is the system in operating condition? Yes No Unknown Does Not Apply Comments:
technical specification means, with respect to any Software, the document setting forth the technical specifications for such Software and included in the Statement of Work.
Working pressure means the settled pressure of a compressed gas at a reference temperature of 15 °C in a full pressure receptacle;
Ventilation means the supply of outside air into a building through window or other openings due to wind outside and convection effects arising from temperature, or vapour pressure differences (or both) between inside and outside of the building;
Generator means a device that produces electricity.
Meters shall have the meaning set forth in Section 4.6(a) hereof.
True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.
Design pressure means the hydrostatic pressure for which each structure or appliance assumed watertight in the intact and damage stability calculations is designed to withstand.
Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.
Network Area means the 50 mile radius around the local school campus the Named Insured is attending.
Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).
Slash means all debris created on the Work area by the precommercial thinning operation.
Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.
Storage area means any location, facility, or vehicle which is used to store, to transport, or to secure a radiographic exposure device, a storage container, or a sealed source when it is not in use and which is locked or has a physical barrier to prevent accidental exposure, tampering with, or unauthorized removal of the device, container, or source.
generating plant means the generating facility described in Schedule 1 as amended from time to time;
Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.
Technical Specifications means the detailed requirements for the Work furnished by the Architect and set forth in Book 3 of the Contract Documents.