Approved Technical Environment definition

Approved Technical Environment shall have the meaning set forth in Exhibit B, at the Location. 1.2 “Current Release” means the most recent version of the Programs generally released to Provider’s licensees of the Program. 1.3 “Maintenance Fee” means the amount to be paid by User to Provider for the services set forth in Exhibit C attached hereto and made a part hereof. 1.4 “New Release” shall mean new versions of the Programs or modules thereof, licensed to User which may be developed by Provider and which are provided to Provider’s licensees of the Programs upon their official release, at no additional cost. 1.5 “Supported Releases” shall mean the Current Release and the immediate two previous versions of the Program following general release of the Current Release to Provider’ licensees. 1.6 “Update” shall mean revisions and error corrections to the Program which may be introduced by Provider and which are provided to Provider’s licensees of the Program upon their official release, at no additional cost. 1.7 "Location" shall mean a room or rooms where each unit of the approved computer is installed and run by the client, whether in centralized configuration, or in a distributed configuration. 1.8 “Documentation” shall mean any and all information, instructions, documents provided by Provider to the User, including those provided before signing hereof, which relate to the use of the Program by the User. INTERPRETACE A DEFINICE Pokud kontext nevyžaduje jinak, xxxx v této Smlouvě následující abecedně uvedená slova a slovní spojení níže definované významy: “Schválené technické prostředí” má význam stanovený v Příloze B, v Místě. “Aktuální verze” znamená nejaktuálnější xxxxx Programů poskytovanou Poskytovatelem. “Poplatek za údržbu” znamená částku, kterou Uživatel zaplatí Poskytovateli za služby stanovené v Příloze C, která je připojena k této Smlouvě a tvoří její nedílnou součást. “Nová verze” znamená nové verze Programů nebo jejich modulů licencovaných Uživateli, které Poskytovatel může vyvinout a které poskytuje držitelům licencí k Programům při jejich oficiálním vydání, a to bez dalších nákladů. “Podporovanou xxxxx” se rozumí aktuální verze a dvě bezprostředně předcházející verze Programu po vydání aktuální verze držitelům licencí k Programům. “Aktualizace” znamená revize a opravy chyb v Programu, které může Poskytovatel zavádět a které jsou poskytovány držitelům licencí k Programu při svém vydání bez dalších nákladů. “Místo” znamená místnost nebo místnosti, kde je instalována xxxxx je...
Sample 1Sample 2
Approved Technical Environment shall have the meaning set forth in Exhibit B, at the Location.
Sample 1
Approved Technical Environment shall have the meaning set forth in Exhibit B, at the Location. 1.2 “Current Release” means the most recent version of the Programs generally released to Ex Libris’ licensees of the Program. 1.3 “Maintenance Fee” means the amount to be paid by User to Ex Libris for the services set forth in Exhibit C attached hereto and made a part hereof. 1.4 “New Release” shall mean new versions of the Programs or modules thereof, licensed to User which may be developed by Ex Libris and which are provided to Ex Libris’ licensees of the Programs upon their official release, at no additional cost. 1.5 “Supported Releases” shall mean the Current Release and the immediate two previous versions of the Program following general release of the Current Release to Ex Libris’ licensees. 1.6 “Update” shall mean revisions and error corrections to the Program which may be introduced by Ex Libris and which are provided to Ex Libris’ licensees of the Program upon their official release, at no additional cost. 1.7 "Location" shall mean a room or rooms where each unit of the approved computer is installed and run by the client, whether in centralized configuration, or in a distributed configuration. 1.8 “Documentation” shall mean any and all information, instructions, documents provided by Ex Libris to the User, including those provided before signing hereof, which relate to the use of the Program by the User. 1.2. “Aktuální verze” znamená nejaktuálnější xxxxx Programů, které byly poskytnuty držitelům licencí k Programu Ex Libris. 1.
Sample 1

Examples of Approved Technical Environment in a sentence

  • User agrees to use the Programs only and solely in the Approved Technical Environment and in accordance with Provider’s then applicable operating instructions.

  • User agrees to use the Programs only and solely in the Approved Technical Environment and in accordance with Ex Libris’ then applicable operating instructions.

  • User agrees to use the Programs only and solely m the Approved Technical Environment and in accordance with Ex Libris' then applicable operating instructions.


More Definitions of Approved Technical Environment

Approved Technical Environment shall have the meaning set forth in Exhibit B, at the Location. 1.2 “Current Release” means the most recent version of the Programs generally released to Ex Libris’ licensees of the Program.
Sample 1
Approved Technical Environment shall have the meaning set forth in Exhibit B, at the Location. 1.2 “Current Release” means the most recent version of the Programs generally released to Provider’s licensees of the Program. 1.3 “Maintenance Fee” means the amount to be paid by User to Provider for the services set forth in Exhibit C attached hereto and made a part hereof. 1.4 “New Release” shall mean new versions of the Programs or modules thereof, licensed to User which may be developed by Provider and which are provided to Provider’s licensees of the Programs upon their official release, at no additional cost. 1.5 “Supported Releases” shall mean the Current Release and the immediate two previous versions of the Program following general release of the Current Release to Provider’ licensees. 1.6 “Update” shall mean revisions and error corrections to the Program which may be introduced by Provider and which are provided to Provider’s licensees of the Program upon their official release, at no additional cost. 1.7 "Location" shall mean a room or rooms where each unit of the approved computer is installed and run by the client, whether in centralized configuration, or in a distributed configuration. 1.8 “Documentation” shall mean any and all information, instructions, documents provided by Provider to the User, including those provided before signing hereof, which relate to the use of the Program by the User.
Sample 1
Approved Technical Environment means the computer hardware and operating software meeting the requirements published by Ex Libris from time to time.
Sample 1
Approved Technical Environment shall have the meaning set forth in Exhibit B, at the Location. 1.2 “Current Release” means the most recent version of the Programs generally released to Ex Libris’ licensees of the Program. 1.3 “Maintenance Fee” means the amount to be paid by User to Ex Libris for the services set forth 1. INTERPRETACE A DEFINICE Pokud kontext nevyžaduje jinak, xxxx v této Smlouvě následující abecedně uvedená slova a slovní spojení níže definované významy: 1.1 “Schválené technické prostředí” má význam stanovený v Příloze B, v Místě. 1.2 “Aktuální verze” znamená nejaktuálnější xxxxx Programů, které byly poskytnuty držitelům licencí k Programu Ex Libris.
Sample 1

Related to Approved Technical Environment

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Production Environment means a logical group of virtual or physical computers comprised within the Cloud Environment to which the Customer will be provided with access and use the purchased Cloud Application(s) in production and for its generally marketed purpose.

  • Customer Environment means Customer’s data network/equipment and premises environment.

  • Hostile environment means a situation in which bullying among students is sufficiently severe or pervasive to alter the conditions of the school climate;

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Contractor Materials means Materials owned or developed prior to the provision of the Work, or developed by Contractor independently from the provision of the Work and without use of the JBE Materials or Confidential Information.

  • Manufacturing Know-How means all information, techniques, inventions, discoveries, improvements, practices, methods, knowledge, skill, experience and other technology, whether or not patentable or copyrightable, and any copyrights based thereon, relating to or necessary or useful for the production, purification, packaging, storage and transportation of Collaboration Products, including without limitation specifications, acceptance criteria, manufacturing batch records, standard operating procedures, engineering plans, installation, operation and process qualification protocols for equipment, validation records, master files submitted to the FDA, process validation reports, environmental monitoring processes, test data including pharmacological, toxicological and clinical test data, cost data and employee training materials.

  • Natural environment means the air, land and water, or any combination or part thereof, of the Province of Ontario; (“environnement naturel”)

  • Controlled technical information means technical information with military or space application that is subject to controls on the access, use, reproduction, modification, performance, display, release, disclosure, or dissemination. Controlled technical information would meet the criteria, if disseminated, for distribution statements B through F using the criteria set forth in DoD Instruction 5230.24, Distribution Statements on Technical Documents. The term does not include information that is lawfully publicly available without restrictions.

  • ICT Environment means the Authority System and the Contractor System. “Information” has the meaning given under section 84 of the FOIA.

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • Production, Use or Storage of Nuclear Material means the production, manufacture, enrichment, conditioning, processing, reprocessing, use, storage, handling and disposal of Nuclear Material.

  • Massive Multiauthor Collaboration Site (or “MMC Site”) means any World Wide Web server that publishes copyrightable works and also provides prominent facilities for anybody to edit those works. A public wiki that anybody can edit is an example of such a server. A “Massive Multiauthor Collaboration” (or “MMC”) contained in the site means any set of copyrightable works thus published on the MMC site.

  • Diagnostic source assembly means the tube housing assembly with a beam-limiting device attached.

  • Product Know-How means Know-How to the extent related to the properties, manufacture or use of any products.

  • Contractor Software means software which is proprietary to the Contractor, including software which is or will be used by the Contractor for the purposes of providing the Services.

  • Biological Samples means any physical samples obtained from Study Participants in accordance with the Protocol for the purposes of the Study.

  • technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;

  • Specified anatomical areas means and includes:

  • Contractor Equipment means all appliances and things of whatsoever nature (other than temporary works) required for execution and completion of works and remedying of any defects, therein. But does not include plant, materials or other things intended to form or forming part of the permanent works.

  • Manufacturing Technology means any and all patents, patent applications, know-how, and all intellectual property rights associated therewith that are owned or controlled by Licensor, and including all tangible embodiments thereof, that are necessary or useful for the manufacture of adeno-associated viruses, adeno-associated virus vectors, research or commercial reagents related thereto, Licensed Products, or other products, including manufacturing processes, technical information relating to the methods of manufacture, protocols, standard operating procedures, batch records, assays, formulations, quality control data, specifications, scale up, any and all improvements, modifications, and changes thereto, and any and all activities associated with such manufacture. Any and all chemistry, manufacturing, and controls (CMC), drug master files (DMFs), or similar materials provided to regulatory authorities and the information contained therein are deemed Manufacturing Technology.

  • Manufacturing Facility means buildings and structures, including machinery and equipment, the primary purpose of which is or will be the manufacture of tangible goods or materials or the processing of such goods or materials by physical or chemical change.

  • fall prevention equipment means equipment used to prevent persons from falling from a fall risk position, inducing personal equipment, a body harness, lanyards, lifelines or physical equipment such as guard-rails, screens, barricades, anchorages or similar equipment;

  • Controlled substance analog means a substance the chemical structure of which is substantially

  • Technical Specifications A specification in a document defining the characteristics of a product or a service, such as the quality levels, the environmental and climate performance levels, the design for all needs, including accessibility for people with disabilities, and the evaluation of conformity, of product performance, of the use of the product, safety or dimensions, as well as requirements applicable to the product as regards the name by which it is sold, terminology, symbols, testing and test methods, packaging, marking or labelling, instructions for use, the production processes and methods at every stage in the life cycle of the supply or service, as well as the evaluation and conformity procedures;

  • Clinical laboratory means a facility for the microbiological, serological, chemical, hematological, radiobioassay, cytological, immunohematological, pathological, or other examination of materials derived from the human body for the purpose of providing information for the diagnosis, prevention, or treatment of a disease or assessment of a medical condition.