Baseline sampling definition

Baseline sampling means the routine monitoring of contaminants covered under the monitoring assistance program to determine compliance with the MCLs listed in Article 2 and the monitoring requirements listed in Article 4, not including repeat monitoring necessary for compliance after detection of a contaminant or a MCL violation.
Sample 1Sample 2Sample 3
Baseline sampling means the routine monitoring of contaminants covered under the monitoring assistance program for the purpose of determining compliance with the MCLs listed in Article 2, and the monitoring requirements listed in Article 4, not including repeat monitoring necessary for compliance after detection of a contaminant or an MCL violation.
Sample 1
Baseline sampling means the routine monitoring of contaminants covered under the monitoring assistance
Sample 1

Examples of Baseline sampling in a sentence

  • Baseline sampling shall be conducted in accordance with a sampling plan approved by the Department, and shall be done during the months of August through October, unless otherwise approved by the Department.

  • Baseline sampling procedures vary based on the size of the MA contract, as described below.

  • Baseline sampling will include total benthic invertebrate density, evenness index, taxa richness and similarity index.

  • Baseline sampling was undertaken during both the dry and monsoon seasons.

  • Baseline sampling (before the mitigation plan begins) of the mitigation and control sites is critical for evaluating effectiveness of the plan.

  • DEP Lake Baseline sampling uses a multiple parameter, single visit during the August index period.

  • Baseline sampling, discussed above, provided background datasets against which geophysical and chemical samplings could be compared.

  • Baseline sampling results for field parameters and field-kit analysis.

  • Baseline sampling will include measurement of turbidity one time each day at the upstream location and the downstream location.

  • Attorneys or parties speak rapidly, argue, and use technical jargon and an aggressive or threatening tone of voice, which are all emotional and May Wong, Multiple Assessment of Coping Strategies Used by Volunteer Blood Donors: Implications for Preparatory Training, 7 J.

Related to Baseline sampling

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Sampling means the distribution of samples to members of the general public in a public place.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Baseline means the “Initial Small Business Lending Baseline” set forth on the Initial Supplemental Report (as defined in the Definitive Agreement), subject to adjustment pursuant to Section 3(a).

  • Quarterly (1/Quarter) sampling frequency means the sampling shall be done in the months of March, June, August, and December, unless specifically identified otherwise in the Effluent Limitations and Monitoring Requirements table.

  • Baseline area means any intra- state area (and every part thereof) des- ignated as attainment or unclassifiable under section 107(d)(1)(A)(ii) or (iii) of the Act in which the major source or major modification establishing the minor source baseline date would con- struct or would have an air quality im- pact for the pollutant for which the baseline date is established, as follows: equal to or greater than 1 μg/m3 (an- nual average) for SO2, NO2, or PM10; or equal or greater than 0.3 μg/m3 (annual average) for PM2.5.(ii) Area redesignations under section 107(d)(1)(A)(ii) or (iii) of the Act cannot intersect or be smaller than the area of impact of any major stationary source or major modification which:

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Quarterly (1/Quarter) sampling frequency means the sampling shall be done in the months of March, June, August, and December, unless specifically identified otherwise in the Effluent Limitations and Monitoring Requirements table.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Subsurface Borings and Testing means borings, probings and subsurface explorations, laboratory tests and inspections of samples, materials and equipment; appropriate professional interpretations of all the foregoing.

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Tests means and include such test or tests to be carried out on the part of the contractor as are prescribed in the contract or considered necessary by BHEL, in order to ascertain the quality, workmanship, performance and efficiency of the contractor or part thereof.

  • Invasive plant species means species of plants not historically found in California that spread outside cultivated areas and can damage environmental or economic resources. Invasive species may be regulated by county agricultural agencies as noxious species. Lists of invasive plants are maintained at the California Invasive Plant Inventory and USDA invasive and noxious weeds database.

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Corrective Measure means a measure as defined in Article 3, point 16, of Regulation (EU) 2019/1020;

  • Study means the investigation to be conducted in accordance with the Protocol.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Assay means a laboratory analysis of Crude Petroleum to include the following: A.P.I. Gravity, Reid vapor pressure, composition, pour point, water and sediment content, sulfur content, viscosity, distillation, hydrogen sulfide, flash/boiling point and other characteristics as may be required by Carrier.

  • Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Baseline Schedule means the initial time schedule prepared by Contractor for Owner’s information and acceptance that conveys Contractor’s and Subcontractors’ activities (including coordination and review activities required in the Contract Documents to be performed by A/E and ODR), durations, and sequence of work related to the entire Project to the extent required by the Contract Documents. The schedule clearly demonstrates the critical path of activities, durations and necessary predecessor conditions that drive the end date of the schedule. The Baseline Schedule shall not exceed the time limit current under the Contract Documents.

  • Outputs means the goods or services that are produced by an entity or other person;

  • Stability (7) means the standard deviation (1 sigma) of the variation of a particular parameter from its calibrated value measured under stable temperature conditions. This can be expressed as a function of time.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;