Block Density definition

Block Density means the number of STRs on the block divided by the number of parcels, expressed as a percentage.
Sample 1Sample 2Sample 3
Block Density means STRs on a block divided by parcels on that block, expressed as a percentage.
Sample 1Sample 2Sample 3
Block Density means the number percentage of STRs on the block divided by the number of parcels expressed as a percentage. Some licenses shall be selected for sun-setting until the density is less than or equal to fifteen percent (15%).
Sample 1

Examples of Block Density in a sentence

  • While many of our markets, mainly in Europe, have now eased lockdown restrictions and activity levels are increasing, our businesses in South Africa (mainly those with exposure to alcohol and tobacco industries) and other African markets continue to be impacted by various stages of lockdown restrictions.

  • Block density, water absorption, drying shrinkage and moisture movement are other design parameters to finalise trial mix.

  • Should a test not meet these requirements the batch of blocks from which the samples were taken shall not the used in the Works and shall be removed from the site.Table 3Block TypeDensityMinimum Average CompressiveStrength kg/cm2Compressive Strength lowest IndividualBlock kg/cm2ANot less than1500kg/m35040 Note to Table 3 (i) Block density is the block weight divided by the gross volume (including core space).

  • For Block density and compressive strength, the mean values determined shall be greater than or equal to the minimum limits specified in Table 2 of IS 2185 (part I).

  • I have it here in the application instructions showing that tool from earlier you could see the instructions will help you process it quickly by doing step-by-step to create the account.

  • Service Construction, 13,600m2, 4 floors, 60 cars Sub-area 3 Total amount of building rights: 77,300m2 Public Parking: N/A Green Areas and parks: 5,800m2 Area density: 40.73% Block density: 40.73% Details 3A.

  • Business, 12,700m2, 5 floors, 149 cars Sub-area 4 Total amount of building rights: 57,600m2 Public Parking: N/A Green Areas and parks: 8,550m2 Area density: 41.7% Block density A: 47.56% B: 43.84% C: 50.84% Details 4A-1.

  • Parking tower, 8,000m2, 3 floors, 285 cars Sub-area 2 Total amount of building right: 30,850m2 Public Parking: 273 cars Green Areas and parks: 16,100m2 Area density: 13.19% Block density A: 21.36% B: 9.37% C: 22.55% Details 2A.

  • Block density matrix of fictional data set representing the proportion of gender- to-gender interactions.

  • Lugar (#6), Senate Foreign Relations Committee, November 2, 2005.”Finally, although the United States reportedly has asked India to endorse PSI, that endorsement has not been forthcoming.

Related to Block Density

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS that operates on a high voltage.

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • Zone 2 means British Columbia and Alberta Receipt Points and Liquids Receipt Points at or upstream of the Blueberry Hill Compressor Station. ARTICLE 2 QUALITY‌ 2.1 Subject to Articles 2.4, 2.5, 2.6, 2.7 and 21.1 hereof, Gas tendered to Transporter at Receipt Points shall conform to the following Quality Specifications:‌

  • Permit area means the area constituted by the blocks that are the subject of a permit;

  • STP means the temperature of fifteen degrees Celsius (15°C) and at a pressure of one hundred and one decimal three two five kilopascals (101.325 kPa).

  • Diameter at breast height (dbh) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Electric utility steam generating unit means any steam electric generating unit that is constructed for the purpose of supplying more than one-third of its potential electric output capacity and more than 25 MW electrical output to any utility power distribution system for sale. Any steam supplied to a steam distribution system for the purpose of providing steam to a steam-electric generator that would produce electrical energy for sale is also considered in determining the electrical energy output capacity of the affected facility.

  • Ozone season means the period of time beginning May 1 of a year and ending on September 30 of the same year, inclusive.

  • ILUA Area means the geographical area in relation to which the Framework ILUA applies, as specified in Schedule 2 of the Framework ILUA;

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • Energy Use Intensity (EUI means the kBTUs (1,000 British Thermal Units) used per square foot of gross floor area.

  • Constructed wetlands means areas intentionally designed and created to emulate the water quality improvement function of wetlands for the primary purpose of removing pollutants from stormwater.

  • Density means the permitted number of dwelling units per

  • cogeneration means the simultaneous generation in one process of thermal energy and electrical or mechanical energy;