Brake drum definition

Brake drum means a rotating, wearable mechanism against which the brake wheel cylinder clamps the brake shoes in a drum brake assembly. This device acts as the primary heat absorption and dissipation device as the brake corner translates vehicle kinetic energy into heat.

Examples of Brake drum in a sentence

  • Source: DRIRE, Limousin Fastening bolt and nut Clamping hoop Brace Star-shaped disc Brake drum This diagram does not display both rims The interior rim, whose flange is tapered, lies against the raised edge of the star.

  • List of allowed prefabricated parts- Brake drum, disc, caliper and brake holding assembly, master cylinder, Steering gear box, Steering column, Steering wheel, Wheel rims &Tires, tie rod ends, motor, battery.

  • Figure2.1. Main components of drum brake system (Inokom, 2006) 2.2.1 Brake drum and shoe arrangement Brake drums are made of cast iron or aluminum housing bolted to the wheel that rotates around the brake shoes.

  • Headlamp aiming devices using adapters must be in a complete assembly, as per designed by manufacturers.) Including blue adapters;• Hoisting device: Hoist or Pit (Suitable for the vehicles being inspected);• Jack, jack stands;• Welder, cutting torch;• Compressor;• Torque wrench;• Trouble light;• Tire pressure gauge;• Tire tread depth gauge;• Brake drum and brake rotor gauge Vernier Caliper;• Sealed beam replacement units;• Brake fluid;• Assorted lamps;• Fuses; and• Windshield wiper blades.

  • EquipmentThe following list of equipment is not intended as a complete list but rather as a guide describing tools and parts which should be available to an inspection mechanic:• Common hand tools;• Headlamp aiming device (one of 3 types);• Hoisting device (suitable for the vehicles being inspected);• Trouble light;• Tire pressure gauge;• Tire tread depth gauge;• Brake drum and brake rotor gauge;• Sealed beam replacement units;• Brake fluid;• Assorted lamps;• Fuses; and• Windshield wiper blades.

  • Brake drum thermal fatigue test The test is conducted using a new drum with new linings assemblies which have been type approved according to Regulations No. 13, 13-H or 90 (if applicable, protective grease removed).

  • It will be connected in the following order (i.e.) Motor - Disengaging clutch - Gear box - Brake drum - Brake pedal.

  • Moreover, students placed on probation more than once while enrolled at MLCA may also lead to student dismissal.Closed CampusMLCA is a closed campus.

  • Springs, Brake drum, disc, calliper and brake holding assembly, master cylinder, Steering gear box, Steering column, Steering wheel, Wheelrims &Tyres, tie rod ends, Engine, Fuel tank & exhaust system.

  • Proper equipment includes: a tire tread depth gaugeLift, jack or drive over pit CreeperBrake lining thickness gauge Brake drum wear measuring gauge In order to ensure that SDE inspector candidates have the proper skills to perform a complete inspection of their schools school buses please have an official of the school answer the following questions for application to the School Bus Inspection Class.

Related to Brake drum

  • Soft drinks means nonalcoholic beverages that contain natural or artificial sweeteners. "Soft drinks" does not include beverages that contain milk or milk products, soy, rice, or similar milk substitutes, or that contains greater than fifty per cent vegetable or fruit juice by volume.

  • Sludge dryer means any enclosed thermal treatment device that is used to dehydrate sludge and that has a maximum total thermal input, excluding the heating value of the sludge itself, of 2,500 Btu/lb of sludge treated on a wet-weight basis.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Drum means any cylindrical metal shipping container of 13 to 110 gallon capacity.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Riprap means small, broken stones or boulders placed compactly or irregularly on dykes or similar embankments for protection of earth surfaces against wave action or current;

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Stack means any point in a source designed to emit solids, liquids, or gases into the air, including a pipe or duct but not including flares.

  • Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.

  • Chip means an integrated circuit embedded in the Card.

  • Modules means the Base Modules and Extended Modules.

  • Cartridge means a pleated or surface-type filter component with fixed dimensions that is designed to remove suspended particles from water flowing through the filter.

  • HEPA filter means high-efficiency particulate air filters that are rated to achieve a minimum initial particle-removal efficiency of 99.97 per cent using ASTM F 1471– 93 or equivalent standard;

  • PNode has the meaning set forth in the CAISO Tariff.

  • Valve means a device used to control the flow of water in the irrigation system.

  • Spray buff product means a product designed to restore a worn floor finish in conjunction with a floor buffing machine and special pad.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Tablet shall not include Zunes, Personal Computers, game consoles (including Xbox consoles), set-top-boxes, portable media devices, PDAs, Mobile Phones or any device that runs an operating system other than a Permitted Tablet OS.

  • coronavirus means severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2);

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • Halogen means one of the chemical elements chlorine, bromine or iodine.

  • embedded generator means a generator who is not a market participant and whose generation facility is connected to a distribution system of a distributor, but does not include a generator who consumes more electricity than it generates;

  • Kit means a set of components that are packaged together and intended to be used to perform a specific in vitro diagnostic examination, or a part thereof;

  • L.S.D. means lysergic acid diethylamide.

  • Brand name drug means a Prescription Drug that has been given a name by a manufacturer or distributor to distinguish it as produced or sold by a specific manufacturer or distributor and may be used and protected by a trademark.