Brake lining definition

Brake lining means the friction material component with the shape and final dimension to be fixed on to the shoe or backplate;
Brake lining means the friction material component with the shape and final dimension to be fixed on to the shoe or backplate.
Brake lining means the friction material component with the shape and final

Examples of Brake lining in a sentence

  • Brake lining wear will not be required to be covered under the terms of the applicable warranty.

  • Brake lining wear and tire wear will not be required to be covered under the terms of the applicable warranty.

  • Brake lining, pad friction surface, or braking surface of the brake drum or rotor shall not be contaminated with grease, oil, or brake fluid.[Statutory Authority: RCW 46.37.005.

  • Brake lining material (other than what is immediately visible and can be seen without dismantling any part of the vehicle).

  • Brake lining assemblies submitted for the test shall be fitted to the relevant brakes and, until a fixed burnishing procedure is established, shall be burnished to the manufacturer’s instructions in agreement with the technical service.

  • Brake lining assemblies or drum brake linings of the type for which approval is sought shall be made available in sufficient quantity to perform the approval tests.

  • Brake lining equivalence shall be based on a comparison of the results achieved using the test procedures prescribed in this annex and in accordance with the following requirements.

  • Note: Brake lining adjustment should be periodically checked (fully) to be sure trailer brakes are in the same adjustment as the tow vehicles.

  • Brake lining wear: Monitoring of the brake linings, supported by brake lining sensors, enables reduced maintenance workand downtimes.

  • Brake lining materials: Brake linings shall not contain asbestos.


More Definitions of Brake lining

Brake lining means the friction material component of a brake lining assembly;

Related to Brake lining

  • Cold Weather Alert means the notice that PJM provides to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for expected extreme cold weather conditions.

  • Alloy means a metal consisting of a mixture of a basic metallic element and one or more metallic, or non-metallic, alloying elements.

  • Uppermost aquifer means the geologic formation nearest the natural ground surface that is an aquifer, as well as lower aquifers that are hydraulically interconnected with this aquifer within the facility's property boundary.

  • Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.

  • Runoff coefficient means the fraction of total rainfall that will appear at the conveyance as runoff.

  • Flowgate means a representative modeling of facilities or groups of facilities that may act as potential constraint points.

  • LSD means lysergic acid diethylamide.

  • Electric power generator means an entity that proposes to

  • Drum means any cylindrical metal shipping container of 13 to 110 gallon capacity.