Combustion Appliance Safety definition

Combustion Appliance Safety or “CAS” means the test procedure for use in the Program
Combustion Appliance Safety or “CAS” means the test procedure for use in the Program.
Combustion Appliance Safety or "CAS:" Testing is conducted to identify unsafe operation of combustion appliances, measure levels of carbon monoxide (CO) in a home, and ensure occupant safety.

Examples of Combustion Appliance Safety in a sentence

  • The safety test may be either a Combustion Appliance Safety Test, a Combustion Appliance Zone Test, a Natural Gas Appliance Test, or a substantially similar test consistent with standard industry practice.

  • During testing, follow the action level protocols prescribed in BPI 1200-S-2017, Combustion Appliance Safety Inspection for Vented Appliances, to ensure worker and client safety.

  • Combustion Appliance Safety or Combustion Appliance Zone testing was completed and passed if required by the project.

  • Therefore, Combustion Appliance Safety (CAS) testing is required to be performed by a Building Performance Institute (BPI) certified professional after the installation of BayREN Home+ measures.

  • Therefore, Combustion Appliance Safety (CAS) testing is required to be performed by a Building Performance Institute (BPI) certified professional after the installation of certain BayREN Home+ measures.

  • Where the UCs detect potential hazards, the customer is responsible for remediation prior to beginning any retrofits.The Pilot references the MF HERCC Combustion Appliance Safety Protocols, which are part of the MF HERCC Audit Protocol.

  • PG&E uses the term Combustion Appliance Safety Testing, for instance, while SDG&E refers to gas appliance testing.

  • The main features and highlights of PG&E’s current approach to natural gas appliance testing are: ◼ Weatherization and Furnace Repair & Replacement are administered as a single program.◼ Once a contractor identifies a home for weatherization, the contractor will notify PG&E and PG&E will perform a Combustion Appliance Safety (CAS) test before the weatherization measures are installed.

  • The ES informs the resident of the Combustion Appliance Safety (CAS) inspection aspect of the LIEE program.

  • Additional training and licensing may be coordinated for installers and CENs by propane suppliers and/or the agencies that support Combustion Appliance Safety training.

Related to Combustion Appliance Safety

  • Biological safety cabinet means a containment unit suitable for the preparation of low to moderate risk agents where there is a need for protection of the product, personnel, and environment, according to National Sanitation Foundation (NSF) Standard 49.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • Aviation gasoline means fuel designed for use in the operation of aircraft other than jet aircraft,

  • Safety zone means the area officially set apart within a roadway for the exclusive use of

  • Combustion turbine means an enclosed fossil or other fuel-fired device that is comprised of a compressor, a combustor, and a turbine, and in which the flue gas resulting from the combustion of fuel in the combustor passes through the turbine, rotating the turbine.

  • health and safety file means a file, or other record containing the information in writing required by these Regulations "health and safety plan" means a site, activity or project specific documented plan in accordance with the client's health and safety specification;

  • Electrical protection barrier means the part providing protection against any direct contact to the high voltage live parts.

  • Gas appliance means any device that uses natural gas to produce light, heat, power, steam, hot water, refrigeration, or air conditioning.

  • Safety Management System has the meaning given to it in the ISM Code.

  • health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;

  • Major appliance means a residential or commercial air conditioner, clothes dryer, clothes washer, dishwasher, freezer, microwave oven, oven, refrigerator, furnace, boiler, dehumidifier, water heater or stove.

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Backflow prevention device means a safety device used to prevent pollution or contamination of the water supply due to the reverse flow of water from the irrigation system.

  • High Quality Waters means all state waters, except:

  • Backflow Prevention Assembly means any mechanical assembly installed at a water service line or at a plumbing fixture to prevent a backflow contamination event, provided that the mechanical assembly is appropriate for the identified contaminant at the cross connection and is an in-line field-testable assembly.

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • Basic Comprehensive User Guide means the Ministry document titled Basic Comprehensive Certificates of Approval (Air) User Guide” dated April 2004 as amended.

  • Underground source of drinking water means an aquifer or its portion:

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Yard waste means leaves, grass clippings, yard and garden debris and brush, including clean woody vegetative material no greater than 6 inches in diameter. This term does not include stumps, roots or shrubs with intact root balls.

  • Cathodic protection tester means a person who can demonstrate an understanding of the principles and measurements of all common types of cathodic protection systems as applied to buried or submerged metal piping and tank systems. At a minimum, such persons must have education and experience in soil resistivity, stray current, structure-to-soil potential, and component electrical isolation measurements of buried metal piping and tank systems.

  • Quality system means documented organizational procedures and policies: internal audits of those policies and procedures: management review and recommendation for quality improvement.”

  • Traffic control signal means a device, whether manually, electrically, or mechanically operated, by which traffic is alternately directed to stop and permitted to proceed.

  • Stormwater management system means any equipment, plants,

  • Radiation therapy simulation system means a radiographic or fluoroscopic x-ray system intended for localizing the volume to be exposed during radiation therapy and confirming the position and size of the therapeutic irradiation field.