Compression molding definition

Compression molding means a closed molding process for fabricating composites in which composite materials are placed inside matched dies that are used to cure the materials under heat and pressure without exposure to the atmosphere. The addition of mold paste or in-mold coating is considered part of the closed molding process. The composite materials used in this process are generally SMC or BMC.
Compression molding means the use of a prepared compound, such as sheet molding compound (SMC), composed of resin and fiberglass fibers and a large hydraulic press to produce fiber reinforced plastic parts.
Compression molding means a closed molding process for fabricating composites in which composite materials are placed inside matched dies that are used to cure the materials under heat and pressure without exposure to the atmosphere. The addition

Examples of Compression molding in a sentence

  • Compression molding means the process of filling one half of molds with a molding compound, closing the mold, and applying heat and pressure until the material is cured.

  • Compression molding has been proven to be an efficient manufacturing process to form a complicated shape in a short time [1].

  • Compression molding means a closed molding process for fabricating composites in which composite materials are placed inside matched dies that are used to cure the materials under heat and pressure without exposure to the atmosphere.

  • Hiebar, Melt viscosity characterisation and its application to injection molding, in: Isayev AI (Eds.), Injection and Compression molding fundamentals, Marcel Dekker, New York, 1989, pp.

  • New York, Marcel Dekker.Dominick Rosato, Donald Rosato, Matthew Rosato, (2004), Plastic Product Material & Process Selection Handbook, Oxford, Elsevier 3.2.3 Compression molding a) Process description and potential materialsProcess descriptionCompression molding is similar to injection molding, except the machine is somewhat simpler.

  • Compression molding is considered one of the most efficient manufacturing processes to mass produce FRP parts for automotive applications.

  • Compression molding is a common method in which setting an appropriate temperature (e.g. 170-200°C) and consolidation time play an important role in achieving the ultimate mechanical properties of the produced bio-composite.

  • Compression molding means a process for producing composite parts in a wide range of volumes typically employing a matched metal tool in a heated (normally hydraulic) press to consolidate sheet materials or moulding compounds at relatively high pressures.

  • There are multiple scripting languages supported by HexChat but currently only Python (2.7) and Perl (5.16) are officially supported.

  • Compression molding was performed using a Universal Film Maker (Spectra Tech, Madison, WI).

Related to Compression molding

  • Compression ignition engine means an internal combustion engine with operating characteristics significantly similar to the theoretical diesel combustion cycle. The regulation of power by controlling fuel supply in lieu of a throttle is indicative of a compression ignition engine.

  • Recycling facility means equipment used by a trade or business solely for recycling:

  • Dry cleaning facility means an establishment with one or more dry cleaning systems.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR Part 82 subpart G with supplemental tables of alternatives available at (http://www.epa.gov/snap/).

  • Generating Facility means the Generating Unit(s) comprising Seller’s power plant, as more particularly described in Section 1.02 and Exhibit B, including all other materials, equipment, systems, structures, features and improvements necessary to produce electric energy and thermal energy, excluding the Site, land rights and interests in land.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Cannabis processing facility means a person that:

  • Infiltrative surface means designated interface where effluent moves from distribution media or a distribution product into treatment media or original soil. In standard trench or bed systems this will be the interface of the distribution media or product and in-situ soil. Two separate infiltrative surfaces will exist in a mound system and an unlined sand filter, one at the interface of the distribution media and fill sand, the other at the interface of the fill sand and in-situ soil.

  • Fuel burning equipment means any furnace, boiler, apparatus, stack and all associated equipment, used in the process of burning fuel.

  • Fiber means a glass strand or strands which is/are protected by a color coded buffer tube and which is/are used to transmit a communication signal along the glass strand in the form of pulses of light.

  • Fossil fuel-fired means the combustion of fossil fuel or any derivative of fossil fuel, alone or in combination with any other fuel, independent of the percentage of fossil fuel consumed in any calendar year (expressed in mmBtu).

  • Polystyrene foam means blown polystyrene and expanded and

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • In-stream Waste Concentration or "(IWC)" means the concentration of a discharge in the receiving water after mixing has occurred in the allocated zone of influence.

  • energy infrastructure means any physical equipment or facility which is located within the Union or linking the Union to one or more third countries and falling under the following categories:

  • Infrastructure facility means a building; structure; or networks of buildings, structures, pipes, controls, and equipment, or portion thereof, that provide transportation, utilities, public education, or public safety services. Included are government office buildings; public schools; courthouses; jails; prisons; water treatment plants, distribution systems, and pumping stations; wastewater treatment plants, collection systems, and pumping stations; solid waste disposal plants, incinerators, landfills, and related facilities; public roads and streets; highways; public parking facilities; public transportation systems, terminals, and rolling stock; rail, air, and water port structures, terminals, and equipment.

  • Asphalt means a dark brown to black cement-like material (solid, semisolid, or liquid in consistency) in which the predominating constituents are bitumens which occur in nature as such or which are obtained as residue in refining petroleum.

  • Cannabis testing facility means an entity registered by

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Dielectric material means a material that does not conduct direct electrical current. Dielectric coatings are used to electrically isolate UST systems from the surrounding soils. Dielectric bushings are used to electrically isolate portions of the UST system (e.g., tank from piping).

  • CO2 means carbon dioxide.

  • Glass cleaner means a cleaning product designed primarily for cleaning surfaces made of glass. Glass cleaner does not include products designed solely for the purpose of cleaning optical materials used in eyeglasses, photographic equipment, scientific equipment and photocopying machines.

  • Auxiliary Water Supply means any water supply on or available to the premises other than the water purveyor's approved public water supply such as, but not limited to, a private well, pond or river.