Cooling Phase definition

Cooling Phase means the period of operation in which the ATS is returned to normal operating temperature and shall last for at least the number of seconds specified in the Updated AECD Document for Emission Modification Category 9.
Sample 1

Examples of Cooling Phase in a sentence

  • The main keyword was “logistics service provider” that was searched and incorporate with the term “performance measurement” and its equivalent terms.

  • It is proposed that the Venting & Cooling Phase 2 project be cancelled and the LFMA have agreed with this proposal.

  • The depressurization phase is followed by the Long Term Cooling Phase where the RV and CV pressure is slowly re- duced as the core decay heat decreases.

  • Coffey, “Nano-Structured Enhanced Microfluidics Device for Spot Cooling Phase II,” Mainstream Engineering and the Florida High Tech Corridor, 2009-2011, $235,000.

  • After each Ramp and Soak phase the heating is turnedoff and the unheated nitrogen is then used too cool the filter (Cooling Phase), allowing the filter to return to the starting temperature, before the moveable tray switches back to trace gas analysis and filter collection of particulate matter.

  • The Long Term Cooling Phase follows the depressurization phase, where the RV and containment pressures are slowly reduced as the core decay heat decreases.

  • After each Ramp and Soak phase the heating is turned off and the unheated nitrogen is then used too cool the filter (Cooling Phase), allowing the filter to return to the starting temperature, before the moveable tray switches back to trace gas analysis and filter collection of particulate matter.55 The UMan TOF-CIMS has been described in detail by Priestley et al., (2018a; 2018b).

  • Coffey, “Nano-Structured Enhanced Microfluidics Device for Spot Cooling Phase I Option,” Mainstream Engineering, 2008-2009, $13,630.

  • The period for the temperature rise is known as Heating Phase, while the period for temperature decrease is known as Cooling Phase.

Related to Cooling Phase

  • Cooling curve means the graphical relationship between heat units stored and cooling time.

  • Cooling Water means the water discharged from any use such as air conditioning, cooling or refrigeration, or to which the only pollutant added is heat.

  • Generator means a device that produces electricity.

  • Combustion turbine means an enclosed fossil or other fuel-fired device that is comprised of a compressor, a combustor, and a turbine, and in which the flue gas resulting from the combustion of fuel in the combustor passes through the turbine, rotating the turbine.

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Emergency generator means any generator of which the sole function is to provide emergency backup power during an interruption of electrical power from the electric utility. An emergency generator does not include:

  • wind turbine generator or “WTG” means a structure comprising a tower, rotor with three blades connected at the hub, nacelle and ancillary electrical and other equipment which may include J-tube(s), transition piece, access and rest platforms, access ladders, boat access systems, corrosion protection systems, fenders and maintenance equipment, helicopter landing facilities and other associated equipment, fixed to a foundation;

  • Excavation work means the making of any man-made cavity, trench, pit or depression formed by cutting, digging or scooping;

  • Bathroom means any room containing a built-in flush-type toilet.

  • Pooling Substation/ Pooling Point means a point where more than one Project may connect to a common Transmission System. Multiple Projects can be connected to a pooling substation from where common transmission system shall be constructed and maintained by the WPD(s) to get connected to the ISTS substation. The voltage level for such common line shall be 220 kV or above. Further, the metering of the pooled power shall be done at the injection point, i.e. the ISTS substation. However, the voltage level of transmission system of individual projects up to the pooling substation may be at 33 kV and above. Sub-meters shall be installed at the pooling substation for metering and forecasting and scheduling of individual Projects. The losses in the common transmission system up to the injection point shall be apportioned to the individual Projects for the purpose of billing.

  • Dialing Parity means as defined in the Act. As used in this Agreement, Dialing Parity refers to both Local Dialing Parity and Toll Dialing Parity.

  • Water Surface Elevation (WSE means the height, in relation to NAVD 1988, of floods of various magnitudes and frequencies in the floodplains of riverine areas.

  • HVAC means heating, ventilation and air conditioning.

  • Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Furniture maintenance product means a wax, polish, conditioner or any other product designed for the purpose of polishing, protecting or enhancing finished wood surfaces other than floors but does not include dusting aids, wood cleaners, products designed solely for the purpose of cleaning and products designed to leave a permanent finish such as stains, sanding sealers and lacquers.

  • Install means the complete installation of any item, equipment or material.

  • generating plant means the generating facility described in Schedule 1 as amended from time to time;

  • HVAC System is defined in Section 6.10(a)(v).

  • drainage work means any watercourse and includes any land which is expected to provide flood storage capacity for any watercourse and any bank, wall, embankment or other structure, or any appliance, constructed or used for land drainage or flood defence;

  • Sanitary Sewer Overflow or “SSO” means an overflow, spill, diversion, or release of wastewater from or caused by Akron’s Sanitary Sewer System. This term shall include: 1) discharges to waters of the State or United States from Akron's Sanitary Sewer System; and 2) any release of wastewater from Akron's Sanitary Sewer System to public or private property that does not reach waters of the State or the United States, including Building/Property Backups.

  • Water surface elevation means the height, in relation to the National Geodetic Vertical Datum (NGVD) of 1929, the North American Vertical Datum (NAVD) of 1988, or other datum, where specified, of floods of various magnitudes and frequencies in the floodplains of riverine areas.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.