Directional well definition

Directional well means a wellbore that is intentionally deviated from vertical with an intentional azimuth.
Sample 1Sample 2Sample 3
Directional well means a well bore that is intentionally deviated from vertical with an intentional azimuth but is not a horizontal well.
Sample 1Sample 2Sample 3
Directional well means a well bore that is intentionally deviated from vertical with an intentional
Sample 1Sample 2

Examples of Directional well in a sentence

  • Nearest lease line : This is calculated from the producing point or section of a wellbore, to the nearest lease line.- Vertical well : the producing point is simply the well’s location.- Directional well : the producing point is the BHL (Bottomhole Location).- Horizontal well : the producing section is the FTP (first take point) through and including the LTP (last take point).- The nearest lease line distance will NOT reference a SHL, PoP, or BHL, unless those points also correspond to a producing point.

  • Directional Drilling: Objectives, Types of deflection tools, tool orientation, Directional well profiles, Well path deflection & correction.2. Down Hole Motors: Positive displacement motors and Turbo-drills - motor description, Power calculation and applications.

  • Directional Drilling: Objectives, Types of deflection tools, tool orientation, Directional well profiles.2. Well Monitoring: Well path deflection & correction.

  • Directional well surveys shall show the following information: surface location (as described in item B.1.b., above), sub-surface elevation of each angle point, and the bottom hole location as shown on well bore log.

  • Directional well surveys shall show the following information: surface location (as described in item B,1,b above), sub-surface elevation of each angle point, and the bottom hole location as shown on well bore log.

  • The fasted Directional well was drilled to TD 1,036 metres in 9.3 dayso 2 Horizontal wells in China with the fastest being drilled to TD of 1,658 metres in 27.49 days (spud to completion)  In total there were 12,458.31 metres drilled (4,128.31 meters in China and 8,330 meters in India) compared to 26,367 metres in H1 2015. The 8,330 meters drilled in India compares with a total of 9,920 meters in India for the FY 2015.

  • Directional well and horizontal wells will be based on the feasibility studies based on the data acquired during the course of development program.

  • Day 4 Well Planning and Path Design • Directional well path design• Horizontal well planning and calculations• Horizontal drilling planning• Drill string design• Torque, drag, shocks and vibrationsDay four will cover well planning and path design.

  • Figure 2.5: J Profile Directional well plan (Jones et al., 2008), [7].

Related to Directional well

  • Interconnection Request means a Generation Interconnection Request, a Transmission Interconnection Request and/or an IDR Transfer Agreement.

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • Construction Plant means appliances, machinery with necessary supply to up keep and maintenance of the works or temporary works but dose not include materials or other things intended to form part of the permanent work.

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • Interconnection Regulations means the Telecommunication (Broadcasting and Cable) Services Interconnection (Addressable Systems) Regulations, 2017, as amended from time to time;

  • construction site means a workplace where construction work is being performed;

  • Constructional Plant means all appliances or things whatever nature required in or about the execution, completion or maintenance of the works or temporary works (as hereinafter defined) but does not include materials or other things intended to form or forming part of the permanent work or temporary housing, hutting, office, stores, etc.,

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Generation Interconnection Request means a request by a Generation Interconnection Customer pursuant to Tariff, Part IV, subpart A, to interconnect a generating unit with the Transmission System or to increase the capacity of a generating unit interconnected with the Transmission System in the PJM Region.

  • Interconnector means a transmission line which crosses or spans a border between Member States for the purpose of connecting the national transmission system of those Member States or a transmission line between a Member State and a third country up to the territory of the Member States or the territorial sea of that Member State;

  • Interconnection Study means any of the studies defined in the CAISO Tariff or, if applicable, any distribution provider’s tariff that reflect the methodology and costs to interconnect the Project to the Participating Transmission Owner’s electric grid.

  • Construction waste means solid waste which is produced or generated during construction, remodeling, or repair of pavements, houses, commercial buildings, and other structures. Construction wastes include, but are not limited to lumber, wire, sheetrock, broken brick, shingles, glass, pipes, concrete, paving materials, and metal and plastics if the metal or plastics are a part of the materials of construction or empty containers for such materials. Paints, coatings, solvents, asbestos, any liquid, compressed gases or semi-liquids and garbage are not construction wastes.

  • Transmission Owner Interconnection Facilities means all Interconnection Facilities that are not Customer Interconnection Facilities and that, after the transfer under Tariff, Attachment P, Appendix 2, section 5.5 to the Interconnected Transmission Owner of title to any Transmission Owner Interconnection Facilities that the Interconnection Customer constructed, are owned, controlled, operated and maintained by the Interconnected Transmission Owner on the Interconnected Transmission Owner’s side of the Point of Interconnection identified in appendices to the Interconnection Service Agreement and to the Interconnection Construction Service Agreement, including any modifications, additions or upgrades made to such facilities and equipment, that are necessary to physically and electrically interconnect the Customer Facility with the Transmission System or interconnected distribution facilities. The “Transmission Provider” shall be the Office of the Interconnection for all purposes, provided that the Transmission Owners will have the responsibility for the following specified activities:

  • technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;

  • Construction sign means a sign which identifies the architect, engineers, contractors and other individuals or firms involved with the construction of a building, or announces the character of the building or enterprise, which is erected during the building construction period.

  • Interconnect means to connect an alarm system including an automatic dialing device to a telephone line, either directly or through a mechanical device that utilizes a telephone, for the purpose of using the telephone line to transmit a message upon the activation of the alarm system.

  • Interconnection is As Defined in the Act.

  • Interconnection Point means the point(s) of connection(s) at which the project is connected to the grid i.e. it shall be at 11 / 22 kV bus bar level of substation of MSEDCL.

  • Correctional facility means a facility operated under the management and control of the Virginia Department of Corrections.

  • Quality Management System means a set of interrelated or interacting elements that organisations use to direct and control how quality policies are implemented and quality objectives are achieved;

  • Surplus Interconnection Request means a request submitted by a Surplus Interconnection Customer, pursuant to Tariff, Attachment RR, to utilize Surplus Interconnection Service within the Transmission System in the PJM Region. A Surplus Interconnection Request is not a New Service Request.

  • Technical Specifications A specification in a document defining the characteristics of a product or a service, such as the quality levels, the environmental and climate performance levels, the design for all needs, including accessibility for people with disabilities, and the evaluation of conformity, of product performance, of the use of the product, safety or dimensions, as well as requirements applicable to the product as regards the name by which it is sold, terminology, symbols, testing and test methods, packaging, marking or labelling, instructions for use, the production processes and methods at every stage in the life cycle of the supply or service, as well as the evaluation and conformity procedures;

  • Transmission Owner Attachment Facilities means that portion of the Transmission Owner Interconnection Facilities comprised of all Attachment Facilities on the Interconnected Transmission Owner’s side of the Point of Interconnection.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Construction Completion means physical construction of a cleanup action component is complete.