Dry Weather Flow(s) definition

Dry Weather Flow(s) means Sewage flow resulting from both sanitary Sewage, and infiltration and inflows from foundation drains or other drains occurring during periods with an absence of rainfall or snowmelt.
Sample 1Sample 2Sample 3
Dry Weather Flow(s) means flows that exist within storm sewer systems during dry weather periods experiencing little or no precipitation.
Sample 1Sample 2Sample 3
Dry Weather Flow(s) means the combination of domestic sewage, groundwater infiltration, commercial and industrial wastewaters, and any other non-precipitation related flows.
Sample 1Sample 2Sample 3

Examples of Dry Weather Flow(s) in a sentence

  • Dry Weather Flows - flow in a sewerage system that occurs as a result of non-storm events or are caused solely by ground water infiltration.

  • Cost estimates submitted as part of the submission requirements shall not be used as the sole method of meeting this requirement.

  • TBD X vMeasurable Goal: Vendor to Sample Dry Weather Flows within Runnins River, Pawtuxet River-North Branch and Narragansett Bay-Upper Bay Watersheds within Year 4.

  • TBD X iiMeasurable Goal: Survey Outfalls to identify Dry Weather Flows within Runnins River, Pawtuxet River-North Branch, Narragansett Bay-Upper Bay Watersheds within Year 4.

  • We anticipate that these changes will reduce the amount of time necessary to finalize reports, thus enabling us to more efficiently provide the reports to supervised entities.

  • TBD X viiiMeasurable Goal: Vendor to Sample Dry Weather Flows within Pawcatuck River, Thames River, Coastal Watersheds within Year 5.

  • The Engineer shall provide with each such flow update an updated projection of future Dry Weather Flows, Peaking Flows and Wet Weather Flows for the Project Locations, together with the predicted portion of these flows from the ACSA and City, combined to equal the total projected Dry Weather, Peaking and Wet Weather Flows.

  • Task 308 – Hydraulic Model Calibration Data Development and Input Performing additional, more detailed, flow data analysis on the 2011 flow and rainfall data, the following model calibration parameters will be developed for each flow meter: • Average Daily Dry Weather Flows (ADDF) • Dry weather flow diurnal patterns for weekdays and weekends.

  • YYXXEVMS4 Program Manager GIS Analyst/ Asset ManagerWater Quality Program Administrator Stormwater Inspector5Inspection and Detection Program to Detect Dry Weather Flows to SMS4 Outfalls in Targeted Areas• Written standard operating procedures were established in December 2016.

  • Existing Dry Weather Flows: Currently, there are no known illicit discharges to the City’s MS4 that have not yet been resolved.


More Definitions of Dry Weather Flow(s)

Dry Weather Flow(s). Develop existing system flow based on historic al data. In previous efforts, the water demands were obtained from a 3rd party and geocoded to each parcel account, and the rate to sewer ratio estimated for each land use category. Using the water demands will account for recent trends in water conservations, and reductions in sewer flows. Wet Weather Flows: Wet Weather Flows will be based on the results of the Flow Monitoring Program, and the identified Rainfall-dependent Inflow and Infiltration (RDII) for each sewer basin. • Determine base RDII from flow monitoring results • Design storm event Future Sewer Flows: In addition to existing flows, future sewer flows will be estimated based on anticipated future infills and anticipated redevelopments.
Sample 1

Related to Dry Weather Flow(s)

  • Cold Weather Alert means the notice that PJM provides to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for expected extreme cold weather conditions.

  • Hot Weather Alert means the notice provided by PJM to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for extreme hot and/or humid weather conditions which may cause capacity requirements and/or unit unavailability to be substantially higher than forecast are expected to persist for an extended period. IDR Transfer Agreement:

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Dry cleaning fluid means any non-aqueous liquid product designed and labeled exclusively for use on: fabrics which are labeled "for dry clean only", such as clothing or drapery; or S-coded fabrics. Dry cleaning fluid includes, but is not limited to, those products used by commercial dry cleaners and commercial businesses that clean fabrics such as draperies at the customer's residence or work place. Dry cleaning fluid does not include spot remover or carpet and upholstery cleaner. For the purposes of this definition, S-coded fabric means an upholstery fabric designed to be cleaned only with water-free spot cleaning products as specified by the Joint Industry Fabric Standards Committee.

  • 2 Wire Analog Voice Grade Loop or “Analog 2W” provides an effective 2-wire channel with 2-wire interfaces at each end that is suitable for the transport of analog Voice Grade (nominal 300 to 3000 Hz) signals and loop-start signaling. This Loop type is more fully described in Verizon Technical Reference (TR)-72565, as revised from time-to-time. If “Customer-Specified Signaling” is requested, the Loop will operate with one of the following signaling types that may be specified when the Loop is ordered: loop-start, ground-start, loop- reverse-battery, and no signaling. Customer specified signaling is more fully described in Verizon TR-72570, as revised from time-to- time. Verizon will not build new facilities.

  • Continuous parameter monitoring system (CPMS means all of the equipment necessary to meet the data acquisition and availability requirements of the Prevention of Significant Deterioration program, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • M2M Flowgate means Flowgates where constraints are jointly monitored and coordinated as defined and set forth in Schedule D to this Agreement.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Compression Ignition Engine means an internal combustion engine with operating characteristics significantly similar to the theoretical diesel combustion cycle. The regulation of power by controlling fuel supply in lieu of a throttle is indicative of a compression ignition engine.

  • Generator Planned Outage means the scheduled removal from service, in whole or in part, of a generating unit for inspection, maintenance or repair with the approval of the Office of the Interconnection in accordance with the PJM Manuals.

  • Basic gas supply service means gas supply service that is

  • Peak tube potential means the maximum value of the potential difference across the x-ray tube during an exposure.

  • Instantaneous flow measurement means the flow measured during the minimum time required for the flow-measuring device or method to produce a result in that instance. To the extent practical, instantaneous flow measurements coincide with the collection of any grab samples required for the same sampling period so that together the samples and flow are representative of the discharge during that sampling period.

  • Dry cleaning facility means an establishment with one or more dry cleaning systems.

  • Signaling System 7 (SS7 means a signaling protocol used by the CCS Network.

  • Suction outlet means the opening or fitting through which the water under negative pressure is drawn from the pool or spa.

  • Service Switching Point (SSP) is a telephone central office switch equipped with a Signaling System 7 (SS7) interface.

  • Local Upgrades means modifications or additions of facilities to xxxxx any local thermal loading, voltage, short circuit, stability or similar engineering problem caused by the interconnection and delivery of generation to the Transmission System. Local Upgrades shall include:

  • Generator Forced Outage means an immediate reduction in output or capacity or removal from service, in whole or in part, of a generating unit by reason of an Emergency or threatened Emergency, unanticipated failure, or other cause beyond the control of the owner or operator of the facility, as specified in the relevant portions of the PJM Manuals. A reduction in output or removal from service of a generating unit in response to changes in market conditions shall not constitute a Generator Forced Outage.

  • Sustainability Factors means environmental, social and employee matters, respect for human rights, anti‐corruption and anti‐bribery matters.

  • Peak flow means the maximum instantaneous rate of flow of water at a particular point resulting from a storm event.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.