Electrical safety standards definition

Electrical safety standards means standards specified in, or determined in accordance with, the regulations in relation to—
Sample 1Sample 2Sample 3
Electrical safety standards means the standards for electrical installations in the eighteenth edition of the Wiring Regulations, published by the Institution of Engineering and Technology and the British Standards Institution as BS 7671: 2018(5);
Sample 1Sample 2Sample 3
Electrical safety standards means standards specified in, or
Sample 1

Examples of Electrical safety standards in a sentence

  • Electrical installations shall be in accordance with chapter 296-46B WAC, Electrical safety standards, administration, and installation.

  • Electrical Safety Standards:The Regulations apply in England to all new tenancies from 1 July 2020 and all existing tenancies from 1 April 2021 Private landlords must ensure: Electrical safety standards are met when the property is occupied during a tenancy.

  • Regulations under section ( Electrical safety standards for properties let by private landlords) may provide for covenants to be implied into a tenancy.

  • Purpose: Chapter 296-46B WAC, Electrical safety stan-dards, administration, and installation, the purpose of the rule making is to make clarifications to chapter 296-46B WAC.The department is adopting the following changes:• WAC 296-46B-030 will include manufacturing train- ing facilities.• WAC 296-46B-110 will allow Class B electricians to install thermostats, security systems, intercoms, and other specific types of low voltage systems.

  • Sri Vijaya ScientificsRemarksPast Performance Details: Sl. No DescriptionRemarks: Provisionally not qualified due to 1) uploaded documents are not attested the by a Gazette Officer or not properly notarized.2) Non submission of Electrical safety standards IEC 60601certificatesSl.NoGeneral InformationDetails of M/s.

  • Electrical Safety Standards The Regulations apply in England to all new tenancies from 1 July 2020 and all existing tenancies from 1 April 2021 Private landlords must ensure: Electrical safety standards are met when the property is occupied during a tenancy.

  • Electrical safety standards referenced in this specification must be adhered to.

  • However, despite the consultation in April, Parliament approved secondary legislation which brings about various changes in the PRS but changes to the Housing and Planning Act 2016, Electrical safety standards for properties let by private landlords were not included.

  • Housing, estate agents and rent charges: other changes o Electrical safety standards - enables the Secretary of State to make regulations to require private sector landlords to meet electrical safety standards.

  • Electrical safety standards for subsea cables are considered in the scope of work being completed by the AWEA OCRP Working Group (WG) 5, which is currently developing its recommendations.

Related to Electrical safety standards

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • safety standard means the Code of Practice for the Wiring of Premises SANS 10142-1 incorporated in the Regulations;

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • Biological safety cabinet means a containment unit suitable for the preparation of low to moderate risk agents where there is a need for protection of the product, personnel, and environment, according to National Sanitation Foundation (NSF) Standard 49.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Reliability Standard means a requirement to provide for Reliable Operation of the Bulk Power System, including without limiting the foregoing, requirements for the operation of existing Bulk Power System Facilities, including cyber security protection, and including the design of planned additions or modifications to such Facilities to the extent necessary for Reliable Operation of the Bulk Power System, but the term does not include any requirement to enlarge Bulk Power System Facilities or to construct new transmission capacity or generation capacity. A Reliability Standard shall not be effective in the United States until approved by the Federal Energy Regulatory Commission and shall not be effective in other jurisdictions until made or allowed to become effective by the Applicable Governmental Authority. See Appendix 2 to the NERC Rules of Procedure, Definitions Used in the Rules of Procedure.

  • Safety Management System means a systematic approach to managing safety, including the necessary organisational structures, accountabilities, policies and procedures;

  • Quality system means documented organizational procedures and policies: internal audits of those policies and procedures: management review and recommendation for quality improvement.”

  • Safety zone means the area officially set apart within a roadway for the exclusive use of

  • Technical Standards means the technical standards set out in paragraph 2.5 of the Order Form;

  • Quality Management System means a set of interrelated or interacting elements that organisations use to direct and control how quality policies are implemented and quality objectives are achieved;

  • Interconnection Regulations means the Telecommunication (Broadcasting and Cable) Services Interconnection (Addressable Systems) Regulations, 2017 (as amended).

  • 911 system means the set of network, database and customer premise equipment (CPE) components required to provide 911 service.

  • Technical Specifications means the detailed requirements for the Work furnished by the Architect and set forth in Book 3 of the Contract Documents.