Flat surfaces definition

Flat surfaces means a two dimensional flat surface without protruding objects.
Sample 1Sample 2Sample 3

Examples of Flat surfaces in a sentence

  • Flat surfaces between bolt holes that form any part of a flame-arresting path shall be planed to within a max- imum deviation of one-half the max- imum clearance specified in paragraph (q)(7) of this section.

  • Flat surfaces between fastening holes that form any part of a flame-ar- resting path shall be planed to within a maximum deviation of one-half the maximum clearance specified in para- graph (q)(7) of this section.

  • Flat surfaces between fastening holes that form any part of a flame-ar- resting path shall be plane to within a maximum deviation of one-half the maximum clearance specified in para- graph (g)(19) of this section.

  • Flat surfaces should not be less than 2” diameter for the legs of tables and heavy furniture or appliances.

  • Flat surfaces on the plan of any panel shall not deviate more than 1/8” from the true plane, provided with rack type drilling for equipment plates to be mounted allowing the flexibility for change after the panels are installed, with allowance for 48 standard 1 ¾” rack units and shall be manufactured in accordance to GRDA Drawings.

  • Flat surfaces on the plan of any panel shall not deviate more than 1/8” from the true plane, provided with rack type drilling for equipment plates to be mounted allowing the flexibility for change after the panels are installed, with allowance for 46 standard 1 ¾” rack units and shall be manufactured in accordance to GRDA Drawings.

  • Flat surfaces, however, will require regular cleaning as contamination will be more apparent and will detract from the appearance of the barrier.

  • Flat surfaces which are covered with concrete, asphalt or some other hard material and are highly reflective are suitable; surfaces consisting of earth which has been tamped down shall not be used.

  • Flat surfaces, holding pockets, and other attachment techniques should be established.• Labels shall be located in a manner that promotes easy identification.

  • Flat surfaces or ledges that accumulate dust and debris should be avoided.

Related to Flat surfaces

  • Surface water means all water which is open to the atmosphere and subject to surface runoff.

  • Surface waters means all waters of the state as defined in G.S. 143-212 except underground waters

  • Basement means any area of the building having its floor subgrade (below ground level) on all sides.

  • Water surface elevation means the height, in relation to the National Geodetic Vertical Datum (NGVD) of 1929, the North American Vertical Datum (NAVD) of 1988, or other datum, where specified, of floods of various magnitudes and frequencies in the floodplains of riverine areas.

  • Landing area means that part of a movement area intended for the landing or take-off of aircraft;

  • Impact surface means an interior or exterior surface that is subject to damage by repeated sudden force such as certain parts of door frames.

  • Pervious surface means an area that releases as runoff a small portion of the precipitation that falls on it. Lawns, gardens, parks, forests or other similar vegetated areas are examples of surfaces that typically are pervious.

  • Topsoil means a varying depth (up to 300 mm) of the soil profile irrespective of the fertility, appearance, structure, agricultural potential, fertility and composition of the soil;

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.

  • Water Surface Elevation (WSE means the height, in relation to NAVD 1988, of floods of various magnitudes and frequencies in the floodplains of riverine areas.

  • Building Drain means that part of the lowest horizontal piping of a drainage system which receives the discharge from soil, waste, and other drainage pipes inside the walls of the building and conveys it to the building sewer, beginning five (5) feet (1.5 meters) outside the inner face of the building wall.

  • Impervious surface means a surface that has been covered with a layer of material so that it is highly resistant to infiltration by water.

  • Soil means all unconsolidated mineral and organic material of any origin.

  • Building site means a plot of land held for building purposes, whether any building is actually erected thereupon or not, and includes the open ground or courtyard enclosed by, or adjacent to, any building erected thereupon;