Focal length definition

Focal length means the distance between the centroids of the effective radiating surface and the focal surface, for a focusing applicator, expressed in centimeters (cm).

Examples of Focal length in a sentence

  • Field diameter required | |16cm, field depth required | | 50cm.6. Focal length required | | 65 cm.7. Heat to light ratio to be ≤ 6 mW/m2.

  • The parameters are:• Focal length of the optical lenses: f = 150 mm• Grating spacings: s1 = 33 µm to s13 = 6.6 µm (periodicity: p1 = 30 lines/mm to p13 = 150 lines/mm in steps of 10 lines/mm)• Maximum length of the optical system: 1.5 m• Camera chip: Size: 7.11 mm x 5.34 mm, Pixel size: 3.69 µm x 3.69 µm, number of pixels: 1928 x 1448• Laser: green, λ = 532 nm, with beam expander2.

  • Eventually set the Focal length of the camera in the drop-down list.

  • Focal length and Distances If one of these parameters, the focal length or the tilt angle, is known, then it is possible to obtain the other one using a simple relation between them and then making 3d measurements using the model for the camera depicted in fig.

  • Panoramic camera parameters for the simulation Focal length 50 mmNumber of pixels in linear array 5,300 Number of columns 39,269Radius of cylinder 100 mmPixel size 8 micronsThe parameters of the first three groups (classes 1, 2, 3, 4, 5 and 6) which can be assumed as block invariant parameters are considered in the simulation.

  • Focal length of the lens is adjustable by applying the different potential to membrane actuator which modifies the meniscus shape.

  • Technical Specifications: Sensor type: APS-C Focal length: 18-300/400 mm Compatible with EF/EF-S mount Maximum aperture: F3.5-6.3 Minimum focus distance: 0.45m Vibration/ Optical Image stabilization Focus type: autofocus Full-time manual focus mechanism Zoom lock: Yes Filter size: 72mm Warranty – Min.

  • The project details are as follows:Photography Scale: 1/5000, Camera Focal length: 150-300mm, Flying Height: 750-1500 m, Planimetric Accuracy: 1:1000, Counter Interval: 1m, Project Duration: 5 years.

  • Summary of Hi-C's optical design• Primary mirror size: 22 cm• Focal length: 2390 cm• Wavelength: Primary/secondary coated for 19.5 nm• Field of view: 5.1x5.1 arcmin• Camera size: 4096x4096 x12um pixelsThis research effort began with the support of the High Corona imager (Hi-C, sounding rocket program) but most of the source requirements came from a NOAA program called SUVI (GOES-R, Solar Ultraviolet Imager)3.

  • Focal length is defined as the distance at which a lens (or mirror) will focus to a point light from a source very far away.

Related to Focal length

  • overall length means the distance between the two vertical planes perpendicular to the median longitudinal plane of the vehicle and touching its front and rear outer edge, disregarding the projection:

  • Length (L) means 96 per cent of the total length on a waterline at 85 per cent of the least moulded depth measured from the top of the keel, or the length from the foreside of the stem to the axis of the rudder stock on that waterline, if that be greater. In ships designed with a rake of keel the waterline on which this length is measured shall be parallel to the designed waterline. The length (L) shall be measured in metres.

  • Arm’s Length Transaction means a transaction between two related parties that is conducted as if they were unrelated, so that there is no conflict of interest.

  • Arm’s Length has the meaning ascribed to such term for the purposes of the Income Tax Act (Canada);

  • Stage Length The stage length is defined as the sum of the distances for the climbout maneuver, climb, cruise, and descent.

  • Arm s length transaction” means a transaction between two related parties that is conducted as if they were unrelated, so that there is no conflict of interest.

  • Arms length Transaction”, means a transaction between two related parties that is conducted as if they were unrelated, so that there is no conflict of interest.

  • Permitted Affiliate Transactions means the following:

  • Affiliate Transaction has the meaning provided in Section 4.11.

  • CAISO Approved Meter means any revenue quality, electric energy measurement meter furnished by Seller, that (a) is designed, manufactured and installed in accordance with the CAISO’s metering requirements, or, to the extent that the CAISO’s metering requirements do not apply, Prudent Electrical Practices, and (b) includes all of the associated metering transformers and related appurtenances that are required in order to measure the net electric energy output from the Generating Facility.

  • Local Exchange Routing Guide (LERG) is a Telcordia Reference document used by Telecommunications Carriers to identify NPA-NXX routing and homing information as well as Network element and equipment designations.

  • Controlled Accumulation Period Length has the meaning specified in subsection 4.03(c).

  • Accumulation Period Length means 12 months; provided, however, if the commencement of the Accumulation Period is delayed in accordance with Section 2.11 hereof, the Accumulation Period Length shall be determined in accordance with the definition of “Accumulation Period Length” in the Indenture Supplement.

  • Non-Retail Behind The Meter Generation means Behind the Meter Generation that is used by municipal electric systems, electric cooperatives, or electric distribution companies to serve load.

  • Affiliate Transactions has the meaning set forth in Section 4.18.

  • Independent Valuation Provider means any of Xxxxxxx & Marsal, Xxxxxxxx Xxxxx Xxxxxx & Xxxxx Capital, Inc., Duff & Xxxxxx LLC, Xxxxxx, Xxxxxx and Company, Lincoln Partners Advisors, LLC, Xxxxx Xxxxxx Xxxx, LLC and Valuation Research Corporation and Xxxxx, or any other Independent nationally recognized third-party appraisal firm selected by the Administrative Agent, and reasonably acceptable to the Borrower.

  • Local Exchange Routing Guide (LERG means the iconectiv Reference document used by Telecommunications Carriers to identify NPA-NXX routing and homing information as well as Network element and equipment designations.

  • Between merchants means in any transaction with respect to which both parties are chargeable with the knowledge or skill of merchants.

  • Qualified Financial Contract means a qualified financial contract as defined in 12 U.S.C. Section 1821(e)(8)(D).

  • Independent Investment Bank means one of the Reference Treasury Dealers that the Issuer appoints to act as the Independent Investment Bank from time to time.

  • Gross Vehicle Weight Rating (GVWR) means the maximum weight of the vehicle, as specified by the manufacturer. GVWR includes total vehicle weight plus fluids, passengers, and cargo.

  • Optional Extended Local Calling Scope Arrangement Traffic is traffic that under an optional Extended Local Calling Scope Arrangement chosen by the Customer terminates outside of the Customer’s basic exchange serving area.

  • Minimum Transaction Size means the minimum value of subsequent subscriptions,

  • Pricing Date means, for any Fiscal Quarter of the Borrower ending on or after July 31, 2018, the date on which the Administrative Agent is in receipt of the Borrower’s most recent Compliance Certificate and financial statements (and, in the case of the year‑end financial statements, audit report) (the “Borrower Information”) for the Fiscal Quarter then ended, pursuant to Section 8.5 hereof. The Applicable Margin shall be established based on the Consolidated Leverage Ratio for the most recently completed Fiscal Quarter and the Applicable Margin established on a Pricing Date shall remain in effect until the next Pricing Date. If (a) an Event of Default exists or (b) the Borrower has not delivered the Borrower Information by the date the same is required to be delivered under Section 8.5 hereof, then, at the request of the Required Lenders, until such Event of Default no longer exists or such Borrower Information is delivered, the Applicable Margin shall be the highest Applicable Margin (i.e., Level IV shall apply); provided, the Administrative Agent will provide notice to Borrower when such highest Applicable Margin goes into effect. If the Borrower subsequently delivers such Borrower Information before the next Pricing Date, the Applicable Margin established by such late delivered Borrower Information shall take effect from the date of delivery until the next Pricing Date. In all other circumstances, the Applicable Margin established by such Borrower Information shall be in effect from the Pricing Date that occurs immediately after the end of the Fiscal Quarter covered by such Borrower Information until the next Pricing Date. Each determination of the Applicable Margin made by the Administrative Agent in accordance with the foregoing shall be conclusive and binding on the Borrower and the Lenders if reasonably determined. The parties understand that the Applicable Margin set forth herein shall be determined and may be adjusted from time to time based upon the Borrower Information. If it is subsequently determined that any such Borrower Information was incorrect (for whatever reason, including, without limitation, because of a subsequent restatement of earnings by the Borrower) at the time it was delivered to the Administrative Agent and the Lenders, and if the applicable interest rate or fees calculated for any period were lower than they should have been had the correct information been timely provided, then such Applicable Margin for such period shall be automatically recalculated using the correct Borrower Information. The Administrative Agent shall promptly notify the Borrower in writing of any additional interest and fees due because of such recalculation, and the Borrower shall pay within five (5) Business Days of receipt of such written notice such additional interest or fees due to the Administrative Agent, for the account of each Lender holding Commitments and Loans at the time the additional interest and fee payment is received. Any recalculation of the Applicable Margin required by this provision shall survive the termination of this Agreement, and this provision shall not in any way limit any of the Administrative Agent’s or any Lender’s other rights under this Agreement. If it is subsequently determined that any such Borrower Information was incorrect (for whatever reason, including, without limitation, because of a subsequent restatement of earnings by the Borrower) at the time it was delivered to the Administrative Agent and the Lenders, and if the applicable interest rate or fees calculated for any period were higher than they should have been had the correct information been timely provided, then neither the Administrative Agent nor any Lender shall be required to refund or return any portion of such interest or fee.

  • Approved Valuation Firm means, with respect to any Collateral Obligation, each of (a) Xxxxxx Xxxxxx, (b) Xxxxxxxx Xxxxx, (c) Lincoln International LLC, (d) Duff & Xxxxxx and (e) any other nationally recognized valuation firm approved by the Borrower and the Facility Agent.

  • Approved Third-Party Appraiser means each of (a) Xxxxxx, Xxxxxx & Co., (b) Xxxxxxxx Xxxxx Xxxxxx & Xxxxx Inc., (c) Lincoln International LLC (formerly known as Lincoln Partners LLC), (d) Duff & Xxxxxx Corporation, (e) Valuation Research Corporation, (f) Xxxxxxx & Xxxxxx, (g) Xxxxxx Xxxxxxxxx and (h) any other third party appraiser selected by the Borrower in its reasonable discretion.