Fog coating definition

Fog coating means a coating is applied to a plastic part for the purpose of color matching without masking a molded-in texture. A fog coat shall not be applied at a thickness of more than 0.5 mils of coating solids.
Sample 1Sample 2Sample 3
Fog coating means a coating is applied to a plastic part for the purpose of color matching without masking a molded-in texture and that is not applied at a thickness of more than 0.5 mils of coating solids.
Sample 1Sample 2Sample 3

Examples of Fog coating in a sentence

  • Fog coating" means a coating is applied to a plastic part for the purpose of color matching without masking a molded-in texture.

  • Discussion Most hungry families have one or more persons in the workforce.

  • SPECIFIC SCOPE OF WORK The services are generally described as follows: The services are generally described as follows: Chip seal overlay, approximately 88,906 square yards of low volume Single Chipseal on Town roadways, Approximately 166,171 square yards of Fog coating, Place approximately 40 tons of hot mix and approximately 10,243 linear feet of double yellow striping on various roads.

  • Fog coating initially may not be that much less expensive than painting because the prep is the same for painting and the stucco company would do extensive stucco repair prior to fogging, but the upkeep is cheap and easy and can be done to keep the stucco looking fresh by a handyman using a Hudson sprayer.

  • An itemized list will be prepared annually and presented to council for approval to write-off non-collectible accounts with outstanding balances in excess of $100.

  • Fog coating to reduce the initial macrotexture was included on these projects in order to mitigate noise complaints from the public.

  • SPECIFIC SCOPE OF WORK The services are generally described as follows: Approximately 4.47 miles of crackfill (Larger cracks only), Chip seal overlay, approximately 87,892 square yards of low volume Single Chipseal and 2,667 square yards of double chipseal on Town roadways, Approximately 83,747square yards of Fog coating, Place approximately 40 tons of hot mix and, approximately 29,441 linear feet of double yellow striping on various roads.

Related to Fog coating

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Metallic coating means a coating which contains more than five grams of metal particles per liter of coating, as applied. Metal particles are pieces of a pure elemental metal or a combination of elemental metals.

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.

  • Clear coating means a transparent coating designed to provide the final gloss and resistance properties of the coating system;

  • Nuclear coating means any protective coating used to seal porous surfaces such as steel (or concrete) that otherwise would be subject to intrusion by radioactive materials. These coatings must be resistant to long-term (service life) cumulative radiation exposure (ASTM D4082-89), relatively easy to decontaminate (ASTM D4256-89(1994)e1), and resistant to various chemicals to which the coatings are likely to be exposed (ASTM D3912-80). [For nuclear coatings, see the general protective requirements outlined by the United States nuclear regulatory commission in a report entitled "Regulatory Guide 1.54 - Service Level I, II and III Protective Coatings Applied to Nuclear Plants"

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Dip coating means the application of a coating material to a substrate by dipping the part into a tank of the coating material.

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.

  • Specialty coating means a coating that is used for unusual job performance requirements, usually in small amounts. These products include but are not limited to adhesion primers, resist coatings, soft coatings, reflective coatings, electrostatic prep coatings, headlamp lens coatings, ink pad printing coatings, stencil coatings, texture coatings (automotive), vacuum metalizing coatings, and gloss flatteners.

  • Topcoat means a coating that is applied over a primer on an aerospace vehicle or component for appearance, identification, camouflage, or protection. Topcoats that are defined as specialty coatings are not included under this definition.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Repair coating means a coating used to re-coat portions of a previously coated product which has sustained mechanical damage to the coating following normal coating operations.

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);

  • Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.

  • cannabis resin means the separated resin, whether crude or purified, obtained from any plant of the genus Cannabis;

  • commercial fishing means to take, harvest, hold, transport, or off-load marine species for sale or intended sale (R.I. Gen. Laws § 20-1-3).