General T&Cs definition

General T&Cs means the general terms and conditions set out in Clauses 1 to 15.
General T&Cs means these Nedbank General Terms and Conditions, as may be amended from time to time, including all notices and correspondence that Nedbank may send to the Client from time to time;
General T&Cs means the general terms and conditions of BDQ available at xxxx://xxx.xxx.xxxxx/legal/general-terms-conditions, in the form current as at the date of the relevant Order, subject to variations in accordance with their terms;

Examples of General T&Cs in a sentence

  • The Customer may contact Etisalat to discuss the Service (including these Service Specific Terms and the General T&Cs (Consumer), or any other product or service offered by Etisalat, by using any of the communications channels stated in Clause 30 of the General T&Cs (Consumer).

  • Please see Clause 19 of the General T&Cs (Consumer) for the provisions governing the suspension, disconnection and termination of the Service or the Agreement by Etisalat.

  • Please refer to the Referral Program General T&Cs, respective price plan factsheet and price plan summary for eligibility.

  • The General T&Cs in Section C apply to all Users.Our Acceptable Use Policy and Privacy Policy are incorporated into these T&Cs.Please read the T&Cs carefully before you start to use the Site.

  • In the event of any conflict or inconsistency between these General T&Cs and the Other T&Cs, the Other T&Cs will prevail followed by the General T&Cs.

  • Please see Clause 13 of the General T&Cs (Business) for the customer credit, advance payment and deposit provisions that apply to the Service.

  • Please see Clause 8 of the General T&Cs (Consumer) for the provisions governing the Customer obligations and restrictions that apply to the Service.

  • Please see Clause 17 of the General T&Cs (Business) for the provisions governing the suspension, disconnection and termination of the Service or the Agreement by Etisalat.

  • Any capitalised terms that are not defined in this Clause 2 have the meaning given to them in the General T&Cs (Consumer).

  • Please see Clause 18 of the General T&Cs (Business) for the provisions governing the suspension, disconnection and termination of the Service or the Agreement by Etisalat.


More Definitions of General T&Cs

General T&Cs means these terms and conditions which govern the agreement between You and Sasfin regarding any products and/or services which Sasfin provides to You;
General T&Cs means General Terms and Conditions placed on the Site.
General T&Cs means the most up to date Prepaid Cards General Terms and Conditions, applicable upon Ratibi Cards, and as in effect at any given time. “MOD” means the Money on Demand service provided by FAB to the User.

Related to General T&Cs

  • (1) IN GENERAL.—The term qualified trade or business’ means any trade or business other than—

  • General Terms means these terms.

  • (A) IN GENERAL.—The term tax’ means—

  • exclusive economic zone ’ means the zone established by Presidential Proclamation Numbered 5030, dated March 10, 1983, including the ocean waters of the areas referred to as ‘‘eastern special areas’’ in Article 3(1) of the Agreement between the United States of America and the Union of Soviet Socialist Re- publics on the Maritime Boundary, signed June 1, 1990;

  • General Terms and Conditions means the General Terms and Conditions for Services Contracts as referenced on the RFP cover page.

  • Limited Resource Constraint means, for the 2017/2018 Delivery Year and for FRR Capacity Plans the 2017/2018 and Delivery Years, for the PJM Region or each LDA for which the Office of the Interconnection is required under Tariff, Attachment DD, section 5.10(a) to establish a separate VRR Curve for a Delivery Year, a limit on the total amount of Unforced Capacity that can be committed as Limited Demand Resources for the 2017/2018 Delivery Year in the PJM Region or in such LDA, calculated as the Limited Demand Resource Reliability Target for the PJM Region or such LDA, respectively, minus the Short Term Resource Procurement Target for the PJM Region or such LDA, respectively.

  • Adult foster care means room and board, supervision, and special services to an adult who has a

  • Mold remediation in accordance with professional standards means mold remediation of that

  • Limited Resource Price Decrement means, for the 2017/2018 Delivery Year, a difference between the clearing price for Limited Demand Resources and the clearing price for Extended Summer Demand Resources and Annual Resources, representing the cost to procure additional Extended Summer Demand Resources or Annual Resources out of merit order when the Limited Resource Constraint is binding.

  • General air quality operating permit or "general permit" means an air quality operating permit that meets the requirements of ARM 17.8.1222, covers multiple sources in a source category, and is issued in lieu of individual permits being issued to each source.

  • Limited Demand Resource Reliability Target for the PJM Region or an LDA, shall mean the maximum amount of Limited Demand Resources determined by PJM to be consistent with the maintenance of reliability, stated in Unforced Capacity that shall be used to calculate the Minimum Extended Summer Demand Resource Requirement for Delivery Years through May 31, 2017 and the Limited Resource Constraint for the 2017/2018 and 2018/2019 Delivery Years for the PJM Region or such LDA. As more fully set forth in the PJM Manuals, PJM calculates the Limited Demand Resource Reliability Target by first: i) testing the effects of the ten- interruption requirement by comparing possible loads on peak days under a range of weather conditions (from the daily load forecast distributions for the Delivery Year in question) against possible generation capacity on such days under a range of conditions (using the cumulative capacity distributions employed in the Installed Reserve Margin study for the PJM Region and in the Capacity Emergency Transfer Objective study for the relevant LDAs for such Delivery Year) and, by varying the assumed amounts of DR that is committed and displaces committed generation, determines the DR penetration level at which there is a ninety percent probability that DR will not be called (based on the applicable operating reserve margin for the PJM Region and for the relevant LDAs) more than ten times over those peak days; ii) testing the six-hour duration requirement by calculating the MW difference between the highest hourly unrestricted peak load and seventh highest hourly unrestricted peak load on certain high peak load days (e.g., the annual peak, loads above the weather normalized peak, or days where load management was called) in recent years, then dividing those loads by the forecast peak for those years and averaging the result; and (iii) (for the 2016/2017 and 2017/2018 Delivery Years) testing the effects of the six-hour duration requirement by comparing possible hourly loads on peak days under a range of weather conditions (from the daily load forecast distributions for the Delivery Year in question) against possible generation capacity on such days under a range of conditions (using a Monte Carlo model of hourly capacity levels that is consistent with the capacity model employed in the Installed Reserve Margin study for the PJM Region and in the Capacity Emergency Transfer Objective study for the relevant LDAs for such Delivery Year) and, by varying the assumed amounts of DR that is committed and displaces committed generation, determines the DR penetration level at which there is a ninety percent probability that DR will not be called (based on the applicable operating reserve margin for the PJM Region and for the relevant LDAs) for more than six hours over any one or more of the tested peak days. Second, PJM adopts the lowest result from these three tests as the Limited Demand Resource Reliability Target. The Limited Demand Resource Reliability Target shall be expressed as a percentage of the forecasted peak load of the PJM Region or such LDA and is converted to Unforced Capacity by multiplying [the reliability target percentage] times [the Forecast Pool Requirement] times [the DR Factor] times [the forecasted peak load of the PJM Region or such LDA, reduced by the amount of load served under the FRR Alternative].

  • Minimum Extended Summer Resource Requirement means, for Delivery Years through May 31, 2017, the minimum amount of capacity that PJM will seek to procure from Extended Summer Demand Resources and Annual Resources for the PJM Region and for each Locational Deliverability Area for which the Office of the Interconnection is required under Tariff, Attachment DD, section 5.10(a) to establish a separate VRR Curve for such Delivery Year. For the PJM Region, the Minimum Extended Summer Resource Requirement shall be equal to the RTO Reliability Requirement minus [the Limited Demand Resource Reliability Target for the PJM Region in Unforced Capacity]. For an LDA, the Minimum Extended Summer Resource Requirement shall be equal to the LDA Reliability Requirement minus [the LDA CETL] minus [the Limited Demand Resource Reliability Target for such LDA in Unforced Capacity]. The LDA CETL may be adjusted pro rata for the amount of load served under the FRR Alternative.

  • Day-ahead Scheduling Reserves Resources means synchronized and non-synchronized generation resources and Demand Resources electrically located within the PJM Region that are capable of providing Day-ahead Scheduling Reserves.

  • Electronic and Information Resources Accessibility Standards means the accessibility standards for electronic and information resources contained in Title 1 Texas Administrative Code Chapter 213.