Grade 3 Milk definition

Grade 3 Milk means Milk which has the TPC and SCC parameters identified as such in the Quality Deductions Table.
Sample 1Sample 2Sample 3
Grade 3 Milk means Milk which meets the Grade 3 specification set out in column E of the Quality Table.
Sample 1Sample 2Sample 3
Grade 3 Milk means the percentage specified in the Grade Percentages Table for Grade 3 Milk for the month in which the relevant test is undertaken.
Sample 1Sample 2Sample 3

Examples of Grade 3 Milk in a sentence

  • No more than four milkings will be collected within a 48 hour period and, at a minimum, all other Quality Standards for Grade 3 Milk must be met.

Related to Grade 3 Milk

  • 2 Wire Analog Voice Grade Loop or “Analog 2W” provides an effective 2-wire channel with 2-wire interfaces at each end that is suitable for the transport of analog Voice Grade (nominal 300 to 3000 Hz) signals and loop-start signaling. This Loop type is more fully described in Verizon Technical Reference (TR)-72565, as revised from time-to-time. If “Customer-Specified Signaling” is requested, the Loop will operate with one of the following signaling types that may be specified when the Loop is ordered: loop-start, ground-start, loop- reverse-battery, and no signaling. Customer specified signaling is more fully described in Verizon TR-72570, as revised from time-to- time. Verizon will not build new facilities.

  • Finished grade means the grade upon completion of the fill or excavation.

  • Peak tube potential means the maximum value of the potential difference across the x-ray tube during an exposure.

  • Disposal area means 1 or more of the following at a

  • Cathode ray tube or “CRT” means a vacuum tube, composed primarily of glass, which is the visual or video display component of an electronic device. A “used, intact CRT” means a CRT whose vacuum has not been released. A “used, broken CRT” means glass removed from its housing or casing whose vacuum has been released.

  • Quarterly (1/Quarter) sampling frequency means the sampling shall be done in the months of March, June, August, and December, unless specifically identified otherwise in the Effluent Limitations and Monitoring Requirements table.

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Residual disinfectant concentration means the concentration of disinfectant measured in mg/L in a representative sample of water.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • COVID-19 test means a viral test for SARS-CoV-2 that is: