Grade Height definition

Grade Height. Means the surface of the ground measured at any point, or when associated with an object, plant or other thing, the surface of the ground at the base or bottom of that object, plant or thing.
Sample 1Sample 2Sample 3

Examples of Grade Height in a sentence

  • Difference in Grade Height between Two Parcels Where there is a difference in the ground elevation or finished grade between two adjoining parcels of less than two feet, the height of any fence or wall constructed along the common property line shall be determined by using the finished grade of the highest contiguous parcel (see Figure 3-6).

  • Add the following paragraph: The following terms as defined insection Section 10-3-1 of the River ForestVillage zoning Zoning code Code and shall supersede the definitions in this chapter: Accessory Structure(Building), Basement, Building, Dwelling, Grade, Height (Of) Building, Lot, Story, Structure, Yard.

  • Athlete Sport Birthdate Grade Height Weight Parent/Guardian Cell Phone Address Home Phone Email Other Emergency Contact Home/Cell Phone Family Physician Bus.

  • The interior subdivision road, if applicable, shall be constructed to same standard, with the exception of the Slope Standard and Grade Height.

  • Please PrintPlayer’s Full Name: Male: Female: Address: Town: Zip: Phone: Grade: Height: Weight: Date of Birth: / /Father’s Name:Father’s Work #: Cell #:Mother’s Name:Mother’s Work #: Cell #:E-mail Address: Alternate Contact Person: Phone: Family Physician: Phone: Medical allergies, illness or other medical conditions: School child attends or will attend: Nights child cannot practice: Friendship request (Limit one) : Friendship requests will be honored for 2nd grade and younger only.

Related to Grade Height

  • 2 Wire Analog Voice Grade Loop or “Analog 2W” provides an effective 2-wire channel with 2-wire interfaces at each end that is suitable for the transport of analog Voice Grade (nominal 300 to 3000 Hz) signals and loop-start signaling. This Loop type is more fully described in Verizon Technical Reference (TR)-72565, as revised from time-to-time. If “Customer-Specified Signaling” is requested, the Loop will operate with one of the following signaling types that may be specified when the Loop is ordered: loop-start, ground-start, loop- reverse-battery, and no signaling. Customer specified signaling is more fully described in Verizon TR-72570, as revised from time-to- time. Verizon will not build new facilities.

  • Finished grade means the approved elevation of ground surface of lands upon which fill has been placed in accordance with this By-law;

  • Highest Adjacent Grade (HAG means the highest natural elevation of the ground surface, prior to construction, immediately next to the proposed walls of the structure.

  • height means the vertical distance between grade and the highest point of the building or structure;

  • Lowest Adjacent Grade (LAG means the elevation of the ground, sidewalk or patio slab immediately next to the building, or deck support, after completion of the building.

  • Rubbing alcohol means any product containing isopropyl alcohol (also called isopropanol) or denatured ethanol and labeled for topical use, usually to decrease germs in minor cuts and scrapes, to relieve minor muscle aches, as a rubefacient, and for massage.

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Structural component means a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

  • Sign Height means the vertical height of a sign from the lowest point of finished grade to the highest part of the sign;

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Grade point average or "GPA" means the grade point average earned by an eligible student and reported by the high school or participating institution in which the student was enrolled based on a scale of 4.0 or its equivalent if the high school or participating institution that the student attends does not use the 4.0 grade scale;

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Passing grade means work of such character that credit would be entered on the records were the semester to close at that time.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Asynchronous store and forward means the transmission of a patient's medical information from an originating site to the health care provider for telehealth at a distant site without the presence of the patient.

  • PAD means a Preauthorized Debit.

  • MARPOL 73/78 means the International Convention for the Prevention of Pollution from Ships (1973) as modified by the Protocol of 1978 relating thereto;

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • Peak tube potential means the maximum value of the potential difference across the x-ray tube during an exposure.

  • Cold Weather Alert means the notice that PJM provides to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for expected extreme cold weather conditions.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • Configuration means State-specific changes made to the Software without Source Code or structural data model changes occurring.

  • Check Meter means the Buyer revenue-quality meter section(s) or meter(s), which Buyer may require at its discretion, and which will include those devices normally supplied by Buyer or Seller under the applicable utility electric service requirements.

  • Load means energy consumed by Customers together with allocated losses and unaccounted for energy;

  • voltage means the root-mean-square value of electrical potential between two conductors.