Grease Removal Devices definition

Grease Removal Devices means a type of hydro-mechanical grease interceptor that automatically and mechanically removes non-petroleum fats, oils, and grease from the interceptor, the control of which is either automatic or manually initiated.
Sample 1Sample 2Sample 3

Examples of Grease Removal Devices in a sentence

  • To control FOG at its source, the City requires all FSEs to do the following:• Install Grease Removal Devices (GRD) for all new and existing FSEs.• Maintain records and grease pick-up logs on site and available for review by City contract sewer system personnel.• Conduct GRD surprise maintenance and record keeping inspections annually.

  • Grease Removal Devices, Recordkeeping, and Reporting Requirements City Code Sections 7-5-8 through 7-5-12 defines the requirements to install grease removal devices (such as traps or interceptors), design standards for the removal devices, maintenance requirements, Best Management Practices (BMP) and record keeping and reporting requirements.

  • These documents are effective in requiring the type of equipment to reduce FOG discharged from FSEs, as well as indicating the authority of the District to prohibit SSOs and blockages due to FOG.• Recommendations: No recommended modifications at this time.BMP, Grease Removal Devices, Recordkeeping, and Reporting Requirements (SSMP 7.D)Level of Effectiveness: District Ordinance 09-01 section 2.04 requires that all FSEs have best management practices (BMPs).

  • All Grease Removal Devices shall be kept in good repair, and shall be maintained in continuous operation.

  • Interceptors and Separators 110, 111 §1003.3.1 Grease Interceptors and Automatic Grease Removal Devices Required.This adds a provision allowing one or more interceptors on or above the floor and upstream of existing interceptor when insufficient space or cost for putting more interceptors in is prohibitive.

  • Secondly, for the purpose the product is not a cosmetic, but medicine.

  • All Grease Removal Devices shall be installed on the premises where Grease is used or generated.

  • While there is a wide variety of manufactures and configurations of HGI devices, operationally, there are two general categories: • “Passive” HGIs, which simply trap and retain separated FOG.• Grease Removal Devices (GRD), which automatically remove the separated FOG from the HGI, typically into a separate holding container.

  • Grease Removal Devices, Recordkeeping, and Reporting Requirements The Municipal Utility Services has included the following FOG BMPs, removal device, record keeping, and reporting requirements in the proposed addendum: Requirements for BMPs: All Food Service Establishments, FSEs, shall implement BMPs in accordance with the requirements and guidelines established by the City under its FOG Control Program in an effort to minimize the discharge of FOG to the sewer system.

  • The contents of all Grease Removal Devices shall be removed periodically as necessary to prevent violations of this Ordinance.

Related to Grease Removal Devices

  • Bug and tar remover means a product labeled to remove either or both of the following from painted motor vehicle surfaces without causing damage to the finish:

  • Tree removal means to kill or to cause irreparable damage that leads to the decline and/or death of a tree. This includes, but is not limited to, excessive pruning, application of substances that are toxic to the tree, over-mulching or improper mulching, and improper grading and/or soil compaction within the critical root radius around the base of the tree that leads to the decline and/or death of a tree. Removal does not include responsible pruning and maintenance of a tree, or the application of treatments intended to manage invasive species.

  • Monitoring device means the total equipment used to measure and record (if applicable) process parameters.

  • Individual monitoring devices means devices designed to be worn by a single individual for the assessment of dose equivalent. For purposes of these regulations, "personnel dosimeter" and "dosimeter" are equivalent terms. Examples of individual monitoring devices are film badges, thermoluminescent dosimeters (TLDs), pocket ionization chambers, optically stimulated luminescence (OSL) dosimeters and personal air sampling devices.

  • Legend Removal Date shall have the meaning ascribed to such term in Section 4.1(c).

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Generator Operator means the Person that Operates the Generating Facility and performs the functions of supplying electric energy and interconnected operations services within the meaning of the NERC Reliability Standards.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • explosive actuated fastening device means a tool that is activated by an explosive charge and that is used for driving bolts, nails and similar objects for the purpose of providing fixing;

  • Incinerator means any enclosed device that:

  • Removal Cut-Off Date means, with respect to the Removed Accounts, .

  • Adhesive remover means a product designed to remove adhesive from either a specific substrate or a variety of substrates. “Adhesive Remover” does not include products that remove adhesives intended for use on humans or animals.

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.

  • Monthly Minimum Removal Efficiency means the minimum reduction in the pollutant parameter specified when the effluent average monthly concentration for that parameter is compared to the influent average monthly concentration.

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Removal Date means, with respect to the Removed Accounts designated hereby, , .

  • Alcohol Screening Device (ASD) means a breath or saliva device, other than an Evidential Breath Testing Device (EBT), that is approved by the National Highway Traffic Safety Administration and placed on its Conforming Products List for such devices.

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Generator Owner means the Person that owns the Generating Facility and has registered with the NERC as the Person responsible for complying with all NERC Reliability Standards applicable to the owner of the Generating Facility.

  • Combustion turbine means an enclosed fossil or other fuel-fired device that is comprised of a compressor, a combustor, and a turbine, and in which the flue gas resulting from the combustion of fuel in the combustor passes through the turbine, rotating the turbine.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Fraud Monitoring System means an off-line administration system that monitors suspected occurrences of ABT- related fraud.

  • Paint remover or stripper means any product designed to strip or remove paints or other related coatings, by chemical action, from a substrate without markedly affecting the substrate. “Paint Remover or Stripper” does not include “Multi-purpose Solvent,” paint brush cleaners, products designed and labeled exclusively as “Graffiti Remover,” and hand cleaner products that claim to remove paints and other related coatings from skin.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • ESD refers to “Educational Service District”.as defined in RCW 28A.310.010.