Examples of Harmonic distortion in a sentence
Tutti questi componenti lavorano insieme per fornire un suono nitido e di alta qualità, con un Total Harmonic Distortion (THD) di soli lo 0,006%.
It is the responsibility of the Producer to maintain the generator(s) in good working order so that the voltage, Total Harmonic Distortion (THD), power factor, and VAR requirements are continually met.
This includes, but is not limited to power quality issues such as Harmonic Distortion, Voltage Flicker and frequency deviations.
The harmonic current distortion occurring at the Compliance Points, with respect to the fundamental component of the contracted peak demand of 26 MW, shall not exceed AEP's Harmonic Distortion Requirements (Table 1), which are based on IEEE Standard 519-2014.
A System Disturbance includes, but is not limited to "Harmonic Distortion" and "Phase Imbalance." A "Harmonic Distortion" is a level of current harmonic total demand distortion measured at the Delivery Point that exceeds the limits on total demand distortion described in IEEE Standard Section A "Phase Imbalance" is a use of capacity and energy in such a manner that causes a current imbalance between phases greater than 5% at the Delivery Point.
A System Disturbance includes, but is not limited to: (a) Harmonic Distortion: a level of current harmonic total demand distortion (TDD) measured at a consumer's point of delivery that exceeds the limits on TDD described in IEEE Standard 519, Section 10; and, (b) Phase Imbalance: a use of capacity and energy in such a manner that causes a current imbalance between phases greater than 5% at a retail customer's point of delivery.
This includes but is not limited to power quality issues such as Harmonic Distortion, Voltage Flicker, and frequency deviations.
These meters can measure important parameters such as active-, reactive power, harmonics and Total Harmonic Distortion (THD).
AC current distortion at rated power must be less than 5% Total Harmonic Distortion (THD) at all power output loadings.
In addition to the requirements of Item 818.45 above, the LED countdown pedestrian signal head shall conform to the following specifications: • Operating Voltage Range: 80VAC to 135VAC • Operating Temperature Range: -40◦C to +74◦C • Power Factor: >90% • Total Harmonic Distortion: <20% • Electronic Noise: FCC Title 47, Sect.