Matrix spike duplicate definition

Matrix spike duplicate means a duplicate sample prepared by adding a known quantity of a target analyte to a field sample matrix or other matrix that is as closely representative of the matrix under analysis as possible.
Matrix spike duplicate means the duplicate sample of the matrix spike sample that is prepared by adding a known quantity of a target analyte to a sample matrix or to a matrix that is as closely representative of the matrix being analyzed as possible.
Matrix spike duplicate or “MSD” means a replicate matrix spike prepared and processed in the laboratory in the same manner as its corresponding matrix spike, and generally used to determine the precision of the recovery of an analyte.

Examples of Matrix spike duplicate in a sentence

  • At the same time the laboratory spikes and analyzes the second field sample aliquot in Section 9.5.1.1, the laboratory shall spike and analyze a third, identical field sample aliquot.December 2005 18 NOTE: Matrix spike duplicate samples are only required for Tier 2 validation studies.

  • Matrix spike duplicate (MSD)—A second sample prepared by adding a known quantity of organisms to a specified amount of sample matrix for which an independent estimate of target analyte concentration is available.

  • These datacan be compared to any other data of known quality.NOTE: MD = Matrix duplicate.MS = Matrix spike.MSD = Matrix spike duplicate.

  • Matrix spike duplicate samples are analyzed to determine the precision of the method and instrument.

  • At the same time the laboratory spikes and analyzes the second field sample aliquot in Section 9.5.1.1, the laboratory shall spike and analyze a third, identical field sample aliquot.NOTE: Matrix spike duplicate samples are only required for Tier 2 validation studies.

  • Matrix spike duplicate (MSD) and/or method duplicate (MD) samples (radiochemistry parameters) will be used to assess the precision with respect to the analytical methods.

  • Matrix spike duplicate and laboratory duplicate analyses are intended to evaluate the precision of laboratory analyses of site-specific matrices.

  • Data Quality Objectives for Analytical Laboratory Measurements (Continued) GroupParameterNotes:CI ‐ Confidence Interval; CRM ‐ Certified Reference Material; MS ‐ Matrix spike; MSD ‐ Matrix spike duplicate; RPD ‐ Relative Percent Difference; SRM ‐ Standard Reference Material; SWAMP ‐ Surface Water Ambient Monitoring Program.

  • Matrix spike duplicate variability: The laboratory reported RPDs were calculated based on the found values in the MS and MSD.

  • Matrix spike duplicate RPD (mean ± SD)Lake and stream samples 5.4% ± 5.7%, n=39DL Lake and stream samples 5.3% ± 4.9%, n=19 Particulate meHg9.


More Definitions of Matrix spike duplicate

Matrix spike duplicate or “MSD” means a replicate MS prepared and processed in the laboratory in the same manner as its corresponding MS, and generally used to determine the precision of the recovery of an analyte.

Related to Matrix spike duplicate

  • Master Batch Record means the document, proposed by Lonza and approved by Customer, which defines the manufacturing methods, test methods and other procedures, directions and controls associated with the manufacture and testing of Product.

  • Batch Record means the production record pertaining to a Batch.

  • Individualized family service plan means a written plan for providing early intervention services to an eligible child and the child’s family.

  • Voice over internet protocol service means any service that:

  • Enrollee point-of-service cost-sharing or "cost-sharing" means amounts paid to health carriers directly providing services, health care providers, or health care facilities by enrollees and may include copayments, coinsurance, or deductibles.

  • Mail order pharmacy means a pharmacy licensed by this

  • Matrix (1 2 8 9) means a substantially continuous phase that fills the space between particles, whiskers or fibres.

  • own-source revenue means adjusted underlying revenue other than revenue that is not under the control of council (including government grants)

  • API means the American Petroleum Institute.

  • HEPA filter means high-efficiency particulate air filters that are rated to achieve a minimum initial particle-removal efficiency of 99.97 per cent using ASTM F 1471– 93 or equivalent standard;

  • Peak tube potential means the maximum value of the potential difference across the x-ray tube during an exposure.

  • Data Log means a complete record of all Data Interchanged representing the Messages and their Associated Data between the parties;

  • LOCKHEED XXXXXX Procurement Representative means a person authorized by LOCKHEED XXXXXX'x cognizant procurement organization to administer and/or execute this Contract.

  • Monthly Progress Report means the report similar in form and content attached hereto as Appendix III.

  • Distribution Protocol means the plan for distributing the Settlement Amount and accrued interest, in whole or in part, as approved by the Courts.

  • Original M&O Revenue means the total State and local Maintenance and Operations Revenue that the District would have received for such school year, calculated in accordance with TEXAS EDUCATION CODE Section 48.256(d), had this Agreement not been entered into by the Parties and the Applicant’s Qualified Property had been subject to the District’s ad valorem maintenance and operations tax without any limitation on value at the rate applicable for such Tax Year. For purposes of this calculation, the Consultant (as defined in Section 4.5) will base its calculations upon (1) the total Taxable Values for each applicable Tax Year as certified by the Appraisal District for all taxable accounts in the District for the District’s maintenance and operations ad valorem tax purposes, save and except for the Applicant’s Qualified Property subject to this Agreement, plus (2) the total Taxable Values for such applicable Tax Year as certified by the Appraisal District for the Applicant’s Qualified Property subject to this Agreement for the District’s debt service (interest and sinking fund) ad valorem tax purposes (which total Taxable Values for the Applicant’s Qualified Property subject to this Agreement shall be used in lieu of the total Taxable Values for such applicable Tax Year as certified by the Appraisal District for the Applicant’s Qualified Property subject to this Agreement for the District’s maintenance and operations ad valorem tax purposes).

  • Supplier of water means any person who owns or operates a public water system.

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.

  • layout plan means a plan of the project depicting the division or proposed division of land into plots, roads, open spaces, amenities, etc. and other details as may be necessary;

  • Baseline data means information gathered at a selected point in time and used thereafter as a basis from which to monitor change.

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per million.

  • Contract for Differences (“CFD”) shall mean a contract, which is a contract for differences by reference to variations in the price of an Underlying Asset.

  • 2 Wire Analog Voice Grade Loop or “Analog 2W” provides an effective 2-wire channel with 2-wire interfaces at each end that is suitable for the transport of analog Voice Grade (nominal 300 to 3000 Hz) signals and loop-start signaling. This Loop type is more fully described in Verizon Technical Reference (TR)-72565, as revised from time-to-time. If “Customer-Specified Signaling” is requested, the Loop will operate with one of the following signaling types that may be specified when the Loop is ordered: loop-start, ground-start, loop- reverse-battery, and no signaling. Customer specified signaling is more fully described in Verizon TR-72570, as revised from time-to- time. Verizon will not build new facilities.

  • Serialization within the part, lot, or batch number means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

  • Base Load Generation Resource means a Generation Capacity Resource that operates at least 90 percent of the hours that it is available to operate, as determined by the Office of the Interconnection in accordance with the PJM Manuals.

  • Definite quantity contract means a fixed price contract that provides for a