Multiphase flow definition

Multiphase flow means the flow of two immiscible phases. For the purposes of the CCS Protocol, the pertinent phases are CO2 (as a gas, liquid, or supercritical fluid), and brine or oil.
Sample 1Sample 2Sample 3
Multiphase flow means the flow of more than one phase (i.e., gas, solid, or liquid). The most common class of multiphase flows are the two-phase flows, including, gas-liquid flow, gas-solid flow, and liquid-solid flow.
Sample 1Sample 2

Examples of Multiphase flow in a sentence

  • Multiphase flow meters can be installed and used individually and in addition to an existing test separator.

  • Multiphase flow pressure drops were measured for a range of flow velocities and hydrate volume fractions in the turbulent flow regime.

  • Multiphase flow is a strong function of the chemical composition of the system as compared to absolute physical quantities such as porosity, permeability etc.

  • Multiphase flow systems are widely used in industrial and environmental processes, and widespread throughout chemical processing, mineral processing, oil production, wastewater treatment, sediment and solids transport, and many other processes.

  • Multi-phase flow of the Late Wisconsinan Cordilleran Ice Sheet in Western Canada.

  • Multi-phase flow is used to model the free-surface interface based on the Volume of Fluid (VOF) interface capturing technique, where incompressible and non-miscible flow phases are modelled by introducing conservation equations of the volume fraction for each volume phase/fluid [2].

  • Multiphase flow in pipes always presents some level of pressure oscillations, even if the flow rates of gas and liquid are kept constant at the pipe inlet.

  • Assets and liabilities used in the Company’s business are identified to Jewellery as a segment.

  • Figure 3: Multi-phase flow pattern investigation through interpretation of performance curves [7] Various markers on Fig.

  • Multiphase flow is considered as a heterogeneous mixture of multiple fluids or phases, which are not homogeneously mixed at a molecular level but can be identified as macroscopic structures, such as solid particles, droplets, and bubbles, in a certain region.

Related to Multiphase flow

  • Customer-generator means a user of a net metering system.

  • Double Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in two or more distinct phases that requires the product container be shaken before use to mix the phases, producing an emulsion.

  • Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.

  • Deployment means a period of time extending from six (6) months before a member of the uniformed services' departure from their home station on military orders through six (6) months after return to his or her home station.

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • Single Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in a single homogeneous phase and which does not require that the product container be shaken before use.

  • Basic Comprehensive User Guide means the Ministry document titled Basic Comprehensive Certificates of Approval (Air) User Guide” dated April 2004 as amended.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • Multiple tomogram system means a computed tomography X-ray system which obtains X-ray transmission data simultaneously during a single scan to produce more than one tomogram.

  • Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.

  • SRS means the scheme referred to by the Ministry of Finance as the Supplementary Retirement Scheme or such other scheme as shall replace or supersede the Supplementary Retirement Scheme from time to time.

  • Weapons system supplier means any prime contractor or first tier subcontractor engaged in, or having a known prospective interest in the development, production or analysis of any of the weapon systems, as well as any major component or subassembly of such system.

  • TDP means “TDP” as that term is defined in the Second Amended Joint Plan or as that term is defined in any Plan confirmed by the Bankruptcy Court.

  • Custom Local Area Signaling Service Features (CLASS) means certain call-management service features that are currently available from SBC-13STATE’s local networks. These could include: Automatic Call Back; Automatic Recall; Call Trace; Caller Identification and related blocking features; Calling Number Delivery; Customer Originated Trace; Distinctive Ringing/Call Waiting; Selective Call Forward; and Selective Call Rejection.

  • Service line sample means a one (1) liter sample of water collected in accordance with section 37(b)(3) of this rule that has been standing at least six (6) hours in a service line.

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.

  • Interconnection Feasibility Study means either a Generation Interconnection Feasibility Study or Transmission Interconnection Feasibility Study.

  • CMC means Comprehensive maintenance Contract (labour, spare and preventive maintenance)

  • Technical Support Services means the technical support and maintenance Services provided by us according to our then-current technical support policy and procedure listed at xxxxxxxxxxxxx.xxx (“Technical Support Policy”) when the Services are purchased.

  • Manufacturing Process means any process for—

  • Integrated Services Digital Network (ISDN means a switched network service that provides end-to-end digital connectivity for the simultaneous transmission of voice and data. Basic Rate Interface-ISDN (BRI-ISDN) provides for a digital transmission of two (2) 64 Kbps bearer channels and one (1) 16 Kbps data channel (2B+D).

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Development Phase means the period before a vehicle type is type approved.

  • Child support services means any civil, criminal or administrative action taken by the Division of

  • smart metering system means an electronic system that is capable of measuring electricity fed into the grid or electricity consumed from the grid, providing more information than a conventional meter, and that is capable of transmitting and receiving data for information, monitoring and control purposes, using a form of electronic communication;