Oils and grease definition

Oils and grease means a component of sewage typically originating from food stuffs or consisting of compounds of alcohol or glycerol with fatty acids, typically expressed in mg/L. Standard labo- ratory methods for determining O&G are USEPA Method 1664 or Standard Methods 5520.
Oils and grease means oils and grease as defined by the procedure used under 18 AAC 70.020(c)(1);
Oils and grease means a component of sewage typically originating from food stuffs or consisting of com- pounds of alcohol or glycerol with fatty acids, typically expressed in mg/L. Standard laboratory methods for deter- mining O&G are USEPA Method 1664 or Standard Methods 5520.

Examples of Oils and grease in a sentence

  • Oils and grease could ignite.▶ Never heat undiluted alcohol in the microwave oven, it can easily ignite.▶ If materials inside the oven ignite, keep the oven door closed to avoidfueling any flames.

  • Consumables will include: Oils and grease Cleaning materials and equipment The Contractor will make provision within the tender costs for all service consumable materials, equipment and tools in accordance with the maintenance specification.

  • Oils and grease, petroleum hydrocarbons, debris, metals, sediment, and contaminated water collect in catch basins, oil/water separators, and settling● basins.

  • Oils and grease spillage on the ground may cause contamination to the soil and groundwater.

  • Oils and grease, petroleum hydrocarbons, debris, metals, sediment, and contaminated water collect in catch basins, oil/water separators, and settling basins.

  • Oils and grease removal concentration and efficiency of noodles wastewater after treated with aeration and non aeration MSL system sawdust) ranged from 23.810 to 62.500%, it can be concluded that the removal efficiency of oil and greases shown to be affected mixture of soil and organic material on a layer of anaerobic system.

  • Oils and grease can leak from equipment during construction and from visitor vehicles onto parking lot surfaces during long-term trail operations.

  • Table 10.5: Standards of emission for gaseous pollutants by industries Type of activity• O & G – Oils and grease, TSS – total suspended solids, AOX – absorbable organic halite, MM – monthly mean;• Values in (mg/Nm3)Nm3 – normal cubic metre (0º C, 101.3 Kpa);• PTS = Total of suspended particles.

  • Possible sources of soil contamination include:  Oils and grease from vehicle maintenance; Hydrocarbons from vehicle refueling;  Cleaning materials and solvents; and Other hazardous and non-hazardous wastes generated from Project activities; The objective is to prevent, minimize, or mitigate soil contamination related to project activities in the Project‟s area of influence.

  • Oils and grease are now removed with hot water and a degreaser (Teepol) applied using a water blaster in the wash pad area.


More Definitions of Oils and grease

Oils and grease means any hydrocarbons, fatty acids, soaps, fats, waxes, oils and any other material that is extracted by a solvent in a method approved in 40 CFR 136.
Oils and grease means oils and grease as defined by the procedure used under18 AAC 70.020(c)(1);‌

Related to Oils and grease

  • Pyrolysis means the thermal degradation of a substance in the absence of any oxidising agent, which does not form part of the substance itself, to produce char and gas and/or liquid; and

  • Dry cleaning fluid means any non-aqueous liquid product designed and labeled exclusively for use on: fabrics which are labeled "for dry clean only", such as clothing or drapery; or S-coded fabrics. Dry cleaning fluid includes, but is not limited to, those products used by commercial dry cleaners and commercial businesses that clean fabrics such as draperies at the customer's residence or work place. Dry cleaning fluid does not include spot remover or carpet and upholstery cleaner. For the purposes of this definition, S-coded fabric means an upholstery fabric designed to be cleaned only with water-free spot cleaning products as specified by the Joint Industry Fabric Standards Committee.

  • external engineering service means an engineering service situated outside the boundaries of a land area and that is necessary to serve the use and development of the land area;

  • Erosion and sediment control plan or "plan" means a document containing material for the conservation of soil and water resources of a unit or group of units of land. It may include appropriate maps, an appropriate soil and water plan inventory and management information with needed interpretations, and a record of decisions contributing to conservation treatment. The plan shall contain all major conservation decisions to ensure that the entire unit or units of land will be so treated to achieve the conservation objectives.

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • Waste Material means (1) any “hazardous substance” under Section 101(14) of CERCLA, 42 U.S.C. § 9601(14); (2) any pollutant or contaminant under Section 101(33) of CERCLA, 42 U.S.C. § 9601(33); (3) any “solid waste” under Section 1004(27) of RCRA, 42 U.S.C. § 6903(27); and (4) any “hazardous substance” under Wis. Stat. § 292.01.

  • Wastewater Treatment Works means an arrangement of devices and structures for treating wastewater, industrial wastes, and sludge. Sometimes used as synonymous with "waste treatment plant" or "wastewater treatment plant" or "pollution control plant".

  • Kerosene means all grades of kerosene, including, but not limited to, the 2 grades of kerosene, No. 1-K and No. 2-K, commonly known as K-1 kerosene and K-2 kerosene respectively, described in American society for testing and materials specifications D-3699, in effect on January 1, 1999, and kerosene-type jet fuel described in American society for testing and materials specification D-1655 and military specifications MIL-T-5624r and MIL-T-83133d (grades jp-5 and jp-8), and any successor internal revenue service rules or regulations, as the specification for kerosene and kerosene-type jet fuel. Kerosene does not include an excluded liquid.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Topsoil means a varying depth (up to 300 mm) of the soil profile irrespective of the fertility, appearance, structure, agricultural potential, fertility and composition of the soil;

  • Waterworks or “water system” means all structures, conduits and appurtenances by means of which water is delivered to consumers except piping and fixtures inside buildings served, and service pipes from building to street main.

  • Stormwater management measure means any practice, technology, process, program, or other method intended to control or reduce stormwater runoff and associated pollutants, or to induce or control the infiltration or groundwater recharge of stormwater or to eliminate illicit or illegal non-stormwater discharges into stormwater conveyances.

  • Engineering controls means constructed containment barriers or systems that control one or more of the following: downward migration, infiltration, or seepage of surface runoff or rain; or natural leaching migration of contaminants through the subsurface over time. Examples include caps, engineered bottom barriers, immobilization processes, and vertical barriers.

  • Nutrient management plan means a plan developed or approved by the Department of Conservation and Recreation that requires proper storage, treatment and management of poultry waste, including dry litter, and limits accumulation of excess nutrients in soils and leaching or discharge of nutrients into state waters.

  • Stormwater management plan means the set of drawings and other documents that comprise all the information and specifications for the programs, drainage systems, structures, BMPs, concepts and techniques intended to maintain or restore quality and quantity of stormwater runoff to pre-development levels.

  • Infiltration means water other than wastewater that enters a sewer system (including sewer system and foundation drains) from the ground through such means as defective pipes, pipe joints, connections, or manholes. Infiltration does not include, and is distinguished from, inflow.

  • Hydraulic fracturing means the fracturing of underground rock formations, including shale and non-shale formations, by manmade fluid-driven techniques for the purpose of stimulating oil, natural gas, or other subsurface hydrocarbon production.