Ordinary General Assembly definition

Ordinary General Assembly means a General Assembly held annually in accordance with Rule 12.2 and following.
Sample 1Sample 2Sample 3
Ordinary General Assembly means an ordinary general assembly of the Shareholders convened in accordance with the By-Laws.
Sample 1Sample 2

Examples of Ordinary General Assembly in a sentence

  • In accordance with the decision of the Bank’s Ordinary General Assembly Meeting held on 29 April 2016, the paid-in capital of the Bank has been increased in cash by TL 72.000 from TL 675.000 to 747.000.

  • In accordance with the decision of the Bank’s Ordinary General Assembly Meeting held on 13 June 2017, the paid-in capital of the Bank has been increased by the amount of cash by TL 500.000 and by increasing the amount of internal resources by TL 3.000 to TL 1.250.000.

  • According to the Ordinary General Assembly decree dated April 18, 2013, it has been decided to increase the Bank’s paid in capital from TRY 300 million to TRY 500 million.

  • According to the Ordinary General Assembly decree dated April 15, 2014, it has been decided to increase the Bank’s paid in capital from TRY 500 million to TRY 650 million.

  • This report shall be submitted to the Ordinary General Assembly before the approval of the annual accounts.

  • According to the Ordinary General Assembly decision dated April 18, 2013, it has been decided to increase the Bank’s paid in capital from TRY 300 million to TRY 500 million.

  • The proposal of the Board of Directors of the Incorporation, as regards the revision of the Profit Distribution Policy of the Incorporation, was approved by the General Assembly at the Ordinary General Assembly Meeting, dated 04.04.2016 and the updated policy is available on the web site of Investor Relations of the Incorporation.

  • In order that a Stockholders' Ordinary General Assembly is considered legally joined by virtue of the first summon, shall be represented on it at lest 51% of the stocks in circulation.

  • Dividend distribution Dividend distribution to the Company’s shareholders is recognised as a liability in the Group’s financial statements when the dividend distribution is approved by the Company’s Ordinary General Assembly.

  • The Ordinary General Assembly of the Shareholders has the power to amend these consolidated financial statements after issuance.

Related to Ordinary General Assembly

  • General Assembly means the General Assembly of the United Nations.

  • National Assembly (“Cynulliad Cenedlaethol”) means the National Assembly for Wales;

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • Electrical chassis means a set made of conductive parts electrically linked together, whose electrical potential is taken as reference.

  • Electric bicycle means a “class 1 electric bicycle”, a “class 2 electric bicycle”, or a “class 3 electric bicycle” as defined in this section. (ORC 4511.01(RRR))

  • Assembly means the Assembly of Heads of State and Government of the African Union;

  • Authorized nuclear pharmacist means a pharmacist who:

  • Electric System Upgrades means any Network Upgrades, Distribution Upgrades, or Interconnection Facilities that are determined to be necessary by the CAISO or Participating Transmission Owner, as applicable, to physically and electrically interconnect the Project to the Participating Transmission Owner’s electric system for receipt of Energy at the Point of Interconnection (as defined in the CAISO Tariff) if connecting to the CAISO Grid, or the Interconnection Point, if connecting to a part of the Participating TO’s electric system that is not part of the CAISO Grid.

  • generating plant means the generating facility described in Schedule 1 as amended from time to time;

  • Electric utility steam generating unit means any steam electric generating unit that is constructed for the purpose of supplying more than one-third of its potential electric output capacity and more than 25 MW electrical output to any utility power distribution system for sale. Any steam supplied to a steam distribution system for the purpose of providing steam to a steam-electric generator that would produce electrical energy for sale is also considered in determining the electrical energy output capacity of the affected facility.

  • Large Facility Interconnection Procedures or “LFIP”) shall mean the interconnection procedures applicable to an Interconnection Request pertaining to a Large Generating Facility that are included in Attachment X of the NYISO OATT. Standard Large Generator Interconnection Agreement (“LGIA”) shall mean this Agreement, the form of interconnection agreement applicable to an Interconnection Request pertaining to a Large Generating Facility, that is included in Attachment X of the NYISO OATT. System Deliverability Upgrades shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications or additions to Byways and Highways and Other Interfaces on the existing New York State Transmission System and Distribution System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Deliverability Interconnection Standard at the requested level of Capacity Resource Interconnection Service. System Protection Facilities shall mean the equipment, including necessary protection signal communications equipment, required to (1) protect the New York State Transmission System from faults or other electrical disturbances occurring at the Large Generating Facility and (2) protect the Large Generating Facility from faults or other electrical system disturbances occurring on the New York State Transmission System or on other delivery systems or other generating systems to which the New York State Transmission System is directly connected. System Upgrade Facilities shall mean the least costly configuration of commercially available components of electrical equipment that can be used, consistent with Good Utility Practice and Applicable Reliability Requirements, to make the modifications to the existing transmission system that are required to maintain system reliability due to: (i) changes in the system, including such changes as load growth and changes in load pattern, to be addressed in the form of generic generation or transmission projects; and (ii) proposed interconnections. In the case of proposed interconnection projects, System Upgrade Facilities are the modifications or additions to the existing New York State Transmission System that are required for the proposed project to connect reliably to the system in a manner that meets the NYISO Minimum Interconnection Standard. Tariff shall mean the NYISO Open Access Transmission Tariff (“OATT”), as filed with the Commission, and as amended or supplemented from time to time, or any successor tariff. Trial Operation shall mean the period during which Developer is engaged in on-site test operations and commissioning of the Large Generating Facility prior to Commercial Operation.

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • Electric generating unit means an individual electric generator and its associated plant and apparatus whose electrical output is capable of being separately identified and metered. Emergency Condition shall mean a condition or situation: (1) that in the judgment of the Party making the claim is imminently likely to endanger life or property; or (2) that, in the case of the CAISO, is imminently likely (as determined in a non-discriminatory manner) to cause a material adverse effect on the security of, or damage to, the CAISO Controlled Grid or the electric systems of others to which the CAISO Controlled Grid is directly connected; (3) that, in the case of the Participating TO, is imminently likely (as determined in a non-discriminatory manner) to cause a material adverse effect on the security of, or damage to, the Participating TO’s Transmission System, Participating TO’s Interconnection Facilities, Distribution System, or the electric systems of others to which the Participating TO’s electric system is directly connected; or

  • Industrial maintenance coating means a high performance architectural coating, including primers, sealers, undercoaters, intermediate coats, and topcoats formulated for application to substrates, including floors, exposed to one or more of the following extreme environmental conditions listed below and labeled “For industrial use only;” “For professional use only;” “Not for residential use;” or “Not intended for residential use.”

  • Nuclear medicine technologist means an individual who holds a current certification with the American Registry of Radiological Technologists or the Nuclear Medicine Technology Certification Board.

  • Tube housing assembly means the tube housing with tube installed. It includes high-voltage and/or filament transformers and other appropriate elements when such are contained within the tube housing.

  • Electric generation service means the provision of retail

  • Electrical work Means any labor or material used in installing, altering, maintaining, or extending an electrical wiring system and the appurtenances, apparatus, or equipment used in connection with the use of electrical energy in, on, outside, or attached to a building, residence, structure, property, or premises. The term includes service entrance conductors as defined by the National Electrical Code.

  • Fabrication means making up data or results and recording or reporting them.

  • Electricity Services means the services associated with the provision of electricity to a person, including the exchange of electric energy, making financial arrangements to manage financial risk associated with the pool price, Distribution Access Service, system access service, ancillary services, billing, metering, performing load settlement and any other services specified in regulations made under the Act;

  • Manufactured housing means a structural unit or units designed for occupancy and constructed in a manufacturing facility and transported, by the use of its own chassis or an independent chassis, to a building site. The term includes any type of building that is constructed at a manufacturing facility and transported to a building site where it is used for housing and may be purchased or sold by a dealer in the interim. For purposes of this section, 2 types of manufactured housing are included. Those 2 types are:

  • Procurement Code means §13-1-101, et seq., XXXX 0000, as amended and supplemented from time to time.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Standard equipment means the basic configuration of a vehicle which is equipped with all the features that are required under the regulatory acts of the Contracting Party including all features that are fitted without giving rise to any further specifications on configuration or equipment level.

  • Systems Engineering means preparing specifications, identifying and resolving interface problems, developing test requirements, evaluating test data, and supervising design.

  • General Assets shall have the meaning given it in Section 3.6(a) hereof;