Patch Cable definition

Patch Cable means the physical optical patch cord used to connect two ports in a FDF;

Examples of Patch Cable in a sentence

  • Fiber optic Patch Cable assembly (a.k.a. patchcords or jumpers) shall be all-dielectric, single- mode fiber design with the appropriate termination as required herein and as shown on the Plans.

  • The termination will be done within 3 to 5 working days upon return of all hardware or equipment provided (ONU, Patch Cable and Power Adaptor) in good working order and condition to ViewQwest’s showroom at 000 Xxxxx Xxxxx Xxxx, Xxxxxxxxx 000000, failing which ViewQwest may in its option deem the service (and any plans thereof) to be continuing at the full stipulated charges.

  • Subscriber shall return all leased hardware or equipment (ONU, Patch Cable and Power Adaptor) in good working order and condition to ViewQwest, failing which, the equipment will be considered lost and the subscriber shall be liable to pay the applicable charges as stated herein.

  • This charge includes a V.35 Router Cable, and a cable package consisting of one Network Interface Cable, one Ethernet Patch Cable, and one Administration Port Cable.

  • On that date, respondent deposited the check into respondent's CTA.

  • Physical connectivity to the co-location facility will be provided by means of an Internal Patch Cable or External Patch Cable.

  • Powered by 802.3af/at XxX **Includes Patch Cable and Surge Protector 6 $ 1,217.70 $ 7,306.20 EW75000-08 Omnidirectional PTMP Hardened Managed IP67 Single Band 802.11ac, Wireless Bridge/Access Point with 5GHz/8dBiOmni Directional Antenna.

  • Exceeding Category 5 Performance StandardsBelden’s DataTwist® 350 Patch Cable (Cat.

  • Length, BlackOrtronicsOR-MC605-00CommscopeUC1BBB2-01F005Category 6 UTP Patch Cable, 7 ft.

  • In the modified architecture, diagnostic knowledge is clearly sepa- rable from control knowledge and coordination knowledge that is referred to by the Organizer and the Coordinator, respectively.Furthermore a Meta-level Controller component is added to LODES so that an agent can not only automatically start a diagnostic process according to a signal from the environmental ob- server (NOBS) and end the current diagnosis, but can also understand whether or not a learning process should be invoked.

Related to Patch Cable

  • Patch means minor modifications to the Licensed Product made by Registry Operator during the performance of error correction services. A Patch does not constitute a Version.

  • Spectrum Compatibility means the capability of two (2) copper loop transmission system technologies to coexist in the same cable without service degradation and to operate satisfactorily in the presence of cross talk noise from each other. Spectrum compatibility is defined on a per twisted pair basis for specific well-defined transmission systems. For the purposes of issues regarding Spectrum Compatibility, service degradation means the failure to meet the Bit Error Ratio (BER) and Signal-to-Noise Ratio (SNR) margin requirements defined for the specific transmission system for all Loop lengths, model Loops, or loss values within the requirements for the specific transmission system.

  • Landing Gear means the installed main and nose landing gear, components and their associated actuators, side braces and parts.

  • Semiconductor equipment means (i) machinery or tools or repair parts or replacements thereof; (ii)

  • Semiconductor cleanrooms means the integrated systems, fixtures, piping, partitions, flooring,

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Remanufacturing means the activity of overhauling, retrofitting, fabricating, or repairing a product or its component parts for ultimate sale at retail.

  • Compaction means the increase in soil bulk density.

  • Ignition interlock device means a device that, without tampering or intervention by another person, would prevent the defendant from operating a motor vehicle if the defendant has a blood or breath alcohol concentration of five-hundredths (0.05) or greater; and

  • Retrofit means to alter, improve, modify, remodel or renovate a building, facility or structure to make that building, facility or structure more energy-efficient.

  • Compatibility means compatibility as defined in point (10) of Article 2 of Directive (EU) 2019/770;

  • Assembly means the Assembly of Heads of State and Government of the African Union;

  • Combustion turbine means an enclosed fossil or other fuel-fired device that is comprised of a compressor, a combustor, and a turbine, and in which the flue gas resulting from the combustion of fuel in the combustor passes through the turbine, rotating the turbine.

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.

  • Valve means a device used to control the flow of water in the irrigation system.

  • Service Component means certain enabling Software, hardware peripherals and associated documentation which may be separately provided by Symantec as an incidental part of a Service.

  • Incinerator means any enclosed device that:

  • Auxiliary meaning an employee who is employed for work which is not of a continuous nature.

  • Subsystem means any subset of the System identified as such in the Contract that may be supplied, installed, tested, and commissioned individually before Commissioning of the entire System.

  • Enclosure means the part enclosing the internal units and providing protection against any direct contact.

  • Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.

  • Fiber means a glass strand or strands which is/are protected by a color coded buffer tube and which is/are used to transmit a communication signal along the glass strand in the form of pulses of light.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.