Pressure tap definition

Pressure tap means a device which connects to the center conductor and shield of a distribution cable to extract television signals; tap does not require cutting of cable to make contact for a subscriber drop.
Sample 1Sample 2Sample 3
Pressure tap means a device which connects to the center conductor and shield of a distribution cable to extract television signals; tap does not re- quire cutting of cable to make contact for a sub- scriber drop.
Sample 1

Examples of Pressure tap in a sentence

  • Pressure tap positions are defined intrinsically to the sail shape in terms of chord-wise and span-wise percentages.

  • Pressure tap is opened by turning the screw counter-clockwise (see Figure 17).2.

  • Pressure tap is opened by turning the screw counter-clockwise (see Figure 15).2.

  • Chlorophyll Content (SPAD) was recorded by a hand-held device chlorophyll model: SPAD-502 PLUS (company MANTOLA), Rate of Photosynthesis (µ mol/m-2/s-1) was measured using CI-301 CO2 Gas analyzer CID, Inc.

  • Pressure tap is opened by turning the screw counter-clockwise (see figure 18).2.

  • Pressure tap (a) and load cell (b) location on the test building.

  • Because the TSDF contains physical distances, we can quantify the average distance of the CT surface to the laser vector surface by taking the average TSDF magnitude of all CT surface points.

  • Pressure tap: To determine whether the pressure tap is upstream or downstream, look on the back of the chart recorder.

  • Pressure tap locations for the midspan row are given in Table 2 below.

  • Pressure tap Isolating Process pipevalveImpulse pipe Vent valve 2- Steam measurementA condensate chamber must be mounted between trans- mitter and process connection.Fill the pipe between the condensate chamber and the transmimitter with water.The installation of a drain is necessary.

Related to Pressure tap

  • Pressure means relative pressure versus atmospheric pressure, unless otherwise stated.

  • Pressure vessel means a vessel that may be used for containing, storing, distributing, transferring, distilling, processing or otherwise handling any gas, vapour or liquid under pressure greater than the atmospheric pressure and includes any pipeline fitting or other equipment attached thereto or used in connection therewith; and

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • Sound pressure level means twenty times the logarithm to the base 10 of the ratio of the effective pressure (µPa) of a sound to the reference pressure of 20 µPa;

  • Positive pressure respirator means a respirator in which the pressure inside the respiratory inlet covering exceeds the ambient air pressure outside the respirator.

  • Tare Weight means the weight of an empty shipping container, excluding all materials used for wrapping, cushioning, banding, waterproofing, packaging, blocking and bracing articles within the exterior container.

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]

  • Design pressure means the maximum pressure that a pressure vessel or plant is designed to withstand safety when operating normally;

  • Sound level meter means an instrument which includes a microphone, amplifier, RMS detector, integrator or time averager, output meter, and weighting networks used to measure sound pressure levels.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Output means the exposure rate, dose rate, or a quantity related in a known manner to these rates from a brachytherapy source or a teletherapy, remote afterloader, or gamma stereotactic radiosurgery unit for a specified set of exposure conditions.

  • Working pressure means the settled pressure of a compressed gas at a reference temperature of 15 °C in a full pressure receptacle;

  • voltage means the root-mean-square value of electrical potential between two conductors.

  • Load means energy consumed by Customers together with allocated losses and unaccounted for energy;

  • Rated Voltage means the manufacturer’s design voltage at which the transmission system is designed to operate or such lower voltage at which the line is charged, for the time being, in consultation with Transmission System Users;

  • voltage ride through as used herein shall mean the ability of a Small Generating Facility to stay connected to and synchronized with the system or equipment of the Transmission Owner and any Affected Systems during system disturbances within a range of under-voltage and over-voltage conditions, in accordance with Good Utility Practice and consistent with any standards and guidelines that are applied to other generating facilities in the Balancing Authority Area on a comparable basis.

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;