Reactive Power Control definition

Reactive Power Control means the control of the production and absorption of Reactive Power by the Providing Unit as detailed in Section 2 of Schedule 3;
Sample 1Sample 2Sample 3

Examples of Reactive Power Control in a sentence

  • Consistent with the mutually acceptable procedures of the Developer and Connecting Transmission Owner, the Developer is responsible for the proper synchronization of the Large Generating Facility to the New York State Transmission System in accordance with NYISO and Connecting Transmission Owner procedures and requirements.9.5 Real and Reactive Power Control.

  • The SIRF for a Synchronous Providing Unit operating as a Synchronous Compensator that can provide Reactive Power Control or as a Synchronous Motor that can provide Reactive Power Control is set at 45 seconds.

  • The Available Volume of the Providing Unit to provide SSRP in a Trading Period is equal to: Steady-State Reactive Power Range x RP Factor x the percentage of the Trading Period during which the Providing Unit is Synchronised or connected to the Power System and capable of providing Reactive Power Control.

  • Test is generally conducted by making small adjustments of the voltage setpoint and verifying by observation that the Facility regulates the voltage at the point of regulation to the setpoint by delivering/receiving reactive power to/from the Company System to maintain the applicable setpoint according to the reactive power control and the reactive amount requirements of Sections 3(a) (Reactive Power Control) and Section 3(b) (Reactive Amount) of Attachment B (Facility Owned by Seller) to this Agreement.

  • Once it was identified in a novel coronavirus the cause of the infection outbreak, on 11th January Chinese media communicated the first death.

  • OPERATIONS 32 9.1 General 32 9.2 NYISO and Connecting Transmission Owner Obligations 33 9.3 Developer Obligations 33 9.4 Start-Up and Synchronization 33 9.5 Real and Reactive Power Control 33 9.6 Outages and Interruptions 34 9.7 Switching and Tagging Rules 38 9.8 Use of Attachment Facilities by Third Parties 38 9.9 Disturbance Analysis Data Exchange 38 ARTICLE 10.

  • OPERATIONS 9.1 General 9.2 NYISO and Connecting Transmission Owner Obligations 9.3 Developer Obligations 9.4 Start-Up and Synchronization 9.5 Real and Reactive Power Control and Primary Frequency Response 9.6 Outages and Interruptions 9.7 Switching and Tagging Rules 9.8 Use of Attachment Facilities by Third Parties 9.9 Disturbance Analysis Data Exchange 9.10 Phasor Measurement Units ARTICLE 10.

  • Power Factor Correction (PFC), Reactive Power Control (RPC), and Voltage Regulation (VR) are all corrective actions employed to improve power quality and thus minimize line losses in power systems.

  • OPERATIONS 33 9.1 General 33 9.2 NYISO and Connecting Transmission Owner Obligations 33 9.3 Developer Obligations 33 9.4 Start-Up and Synchronization 33 9.5 Real and Reactive Power Control 33 9.6 Outages and Interruptions 35 9.7 Switching and Tagging Rules 38 9.8 Use of Attachment Facilities by Third Parties 38 9.9 Disturbance Analysis Data Exchange 39 ARTICLE 10.

  • Ability of a Wind Power Plant to receive reactive power setpoints for each Reactive Power Control Scheme.

Related to Reactive Power Control

  • Reactive Power means the power component which does not produce work but is necessary to allow some equipment to operate, and is measured in kiloVolt Amperes Reactive (kVAR);

  • Electric power generator means an entity that proposes to

  • prescribed authority means the authorities specified in Rule 12 of Plastic Waste Management and Handling Rules, 2016, and Commissioner, Municipal Corporations, Chief Executive Officer/Executive Officer, Urban Local Bodies ;

  • Nontransient noncommunity water system means a public water system that is not a community water system and that regularly serves at least the same 25 persons over 6 months per year.

  • Inactive portion means that portion of a facility which is not operated after November 19, 1980. See also "active portion" and "closed portion".

  • Life-of-the-unit, firm power contractual arrangement means a unit participation power sales agreement under which a utility or industrial customer reserves, or is entitled to receive, a specified amount or percentage of nameplate capacity and associated energy from any specified unit and pays its proportional amount of such unit's total costs, pursuant to a contract:

  • Power plant means a facility for the generation of

  • Stormwater management measure means any practice, technology, process, program, or other method intended to control or reduce stormwater runoff and associated pollutants, or to induce or control the infiltration or groundwater recharge of stormwater or to eliminate illicit or illegal non-stormwater discharges into stormwater conveyances.

  • Stinger-steered automobile or watercraft transporter means an automobile or watercraft transporter

  • Active portion means that portion of a facility where treatment, storage, or disposal operations are being or have been conducted after May 19, 1980, and which is not a closed portion. (See also “closed portion” and “inactive portion.”)

  • Submerged fill pipe means any fill pipe the discharge opening of which is entirely submerged when the liquid level is six inches above the bottom of the tank, or when applied to a tank which is loaded from the side, shall mean any fill pipe the discharge opening of which is entirely submerged when the liquid level is eighteen inches above the bottom of the tank.

  • Acute pain means the normal, predicted physiological response to a noxious chemical, thermal or mechanical stimulus and typically is associated with invasive procedures, trauma and disease. Generally, acute pain is self-limited, lasting no more than a few weeks following the initial stimulus.

  • Anadromous fish means any species of fish which ascends rivers or streams from the sea for breeding purposes (e.g. Alewife, Salmon, Shad).

  • prescribed area means any area over which Norway or any member State (other than the United Kingdom) exercises sovereign rights for the purpose of exploring the seabed and subsoil and exploiting their natural resources, being an area outside the territorial seas of Norway or such member State, or any other area which is from time to time specified under section 10(8) of the Petroleum Act 1998;

  • Quality control means the total of all activities performed by the Design-Builder, Designer, Construction Inspection Professional Engineering Firm and the Materials Testing Firm or Laboratory, subcontractors, producers or manufacturers to ensure that the Work performed by the Design-Builder conforms to the Contract requirements. For design, Quality Control activities shall include, but not be limited to, procedures for design quality, checking, design review including reviews for constructability, and review and approval of Working Plans. For construction, Quality Control activities shall include, but not be limited to, procedures for materials handling and construction quality, inspection, sampling and testing of materials both on site and at the plant(s), field testing of materials, obtaining and verifying Materials Certifications, record keeping, and equipment monitoring and calibration, production process control, and monitoring of environmental compliance. Quality Control also includes documentation of all QC design and construction efforts. The Scope of Work to be performed as part of the Quality Control task may be changed after the RFQ Phase.

  • Flying bug insecticide means any insecticide product that is designed for use against flying insects or other flying arthropods, including but not limited to flies, mosquitoes, moths, or gnats. “Flying Bug Insecticide” does not include “wasp and hornet insecticide”, products that are designed to be used exclusively on humans or animals, or any moth-proofing product. For the purposes of this definition only, “moth-proofing product” means a product whose label, packaging, or accompanying literature indicates that the product is designed to protect fabrics from damage by moths, but does not indicate that the product is suitable for use against flying insects or other flying arthropods.

  • Electric power train means the electrical circuit which includes the traction motor(s), and may include the REESS, the electric energy conversion system, the electronic converters, the associated wiring harness and connectors, and the coupling system for charging the REESS.

  • State Water Control Law means Chapter 3.1 (§ 62.1-44.2 et seq.) of Title 62.1 of the Code of Virginia.

  • Recovery Act designated country means any of the following countries:

  • border control means the activity carried out at a border, in accordance with and for the purposes of this Regulation, in response exclusively to an intention to cross or the act of crossing that border, regardless of any other consideration, consisting of border checks and border surveillance;

  • Safety-sensitive position means a job, including any supervisory or management position, in which an impairment caused by drug or alcohol usage would threaten the health or safety of any person.

  • PJM Control Area means the Control Area recognized by NERC as the PJM Control Area.

  • control zone shall have the meaning given in the Operating Agreement.

  • Fixed wing turbine powered aircraft means an aircraft that:

  • Crawling bug insecticide means any insecticide product that is designed for use against ants, cockroaches, or other household crawling arthropods, including, but not limited to, mites, silverfish or spiders. “Crawling Bug Insecticide” does not include products designed to be used exclusively on humans or animals, or any house dust mite product. For the purposes of this definition only:

  • Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.