Receiving Water Quality Standards definition

Receiving Water Quality Standards means requirements for the POTW’s treatment plant effluent established by applicable State or Federal statutes or regulations for the protection of receiving water quality. Such requirements shall include effluent limitations, and waste discharge standards, requirements, limitations, or prohibitions which may be established or adopted, from time to time.
Sample 1Sample 2Sample 3
Receiving Water Quality Standards means the Connecticut Water Quality Standards, as put forth by the State of Connecticut.
Sample 1Sample 2
Receiving Water Quality Standards means the Massachusetts Water Quality Standards, as provided under M.G.L. chapter 21, Section 27 and set forth in 314 CMR 1.00 et seq.
Sample 1Sample 2Sample 3

Examples of Receiving Water Quality Standards in a sentence

  • Compile information provided by the Co-Permittees and determine the effectiveness of the overall Urban Runoff program in attaining Receiving Water Quality Standards.

  • Urban Runoff discharges from the Permittees’ MS4 shall not cause or contribute to exceedances of Receiving Water Quality Standards (as defined by Beneficial Uses and Water Quality Objectives in Chapter 4 of the Basin Plan) for surface waters or ground waters.

  • Promptly, within two (2) working days, provide oral or e-mail and thereafter submit a report to the Executive Officer that describes the BMPs that are currently being implemented and the additional BMPs that will be implemented to prevent or reduce those Pollutants that are causing or contributing to the exceedance of the applicable Receiving Water Quality Standards.

  • Typically, these include information under the following headings: Application Summary, Permit Summary, Receiving Water Quality Standards, Conditions of Permits, Receiving Water Quality 2 State regulations provide that DEP must notify the applicant, relevant federal and state agencies, and persons on a DEP mailing list that an application has been filed, and also require public notice that a MEPDES hearing has been scheduled (see, Chapter 522, Section 8).

  • Legal Counsel.Independent legal counsel will be retained by the Council to ensure compliance with federal and state requirements, and to review and revise as deemed necessary on any, and all legal instruments that the Council executes.

  • Receiving Water Quality Standards, Affordable Standards Based on Investment Costs, Sustainable Standards Based on Operations and Maintenance Costs.

  • To be suitable for domestic purposes, the raw water supply should meet the B.C. Health Branch's Recommended Receiving Water Quality Standards, in all factors where absolute limits are specified.

  • February 2015 ATTACHMENT 1AMENDMENTS TO CONDITIONS PROPOSED BY THE PANELCondition 3 (Receiving Water Quality Standards): Condition 3 is to be amended by inserting the words highlighted in italic below: 3.

  • Table 1 : Receiving Water Quality Standards ParameterReceiving Water Concentration(2)(g/m3unless otherwise stated)Hardness 20 g/m3CaCO3Hardness 100 g/m3CaCO3Temperature pHSuspended Solids Cyanide (CNWAD ) (1)Iron Manganese Copper NickelZinc Silver1Total Ammonia Antimony Arsenic selenium Mercury Cadmium(VI)less than 3°C increase6.5 to 9.0For upstream concentrations of less than or equal to 100g/m3the increase shall be no greater than 10g/m3.

  • By contrast the Receiving Water Quality Standards – Appendix E of the pSWLP (which largely repeats the provisions of the operative regional plan) are expressly addressed to the effects of discharges following reasonable mixing and do not consider water quality in the FMU context.• The ANZECC (2000) and MfE (2003) Guidelines, while in some respects now overtaken by more recent standards, are helpful in that they operate as triggers to undertake a more detailed site-specific assessment of effects.


More Definitions of Receiving Water Quality Standards

Receiving Water Quality Standards means requirements for the POTW’s treatment plant effluent established by applicable State or Federal statutes or regulations for the protection of receiving water quality. Such requirements shall include effluent limitations, and waste discharge standards,
Sample 1Sample 2
Receiving Water Quality Standards means the Massachusetts Water Quality Standards as provided by M.G.L. Chapter 21, Section 27.
Sample 1Sample 2

Related to Receiving Water Quality Standards

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Water quality volume means the volume equal to the first one-half inch of runoff multiplied by the impervious surface of the land development project.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Quality system means documented organizational procedures and policies: internal audits of those policies and procedures: management review and recommendation for quality improvement.”

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • Spatial Planning and Land Use Management Act means the Spatial Planning and Land Use Management Act, 2013 (Act 16 of 2013);

  • HITECH means the Health Information Technology for Economic and Clinical Health Act.

  • Clean water standards, as used in this clause, means any enforceable limitation, control, condition, prohibition, standard, or other requirement promulgated under the Water Act or contained in a permit issued to a discharger by the Environmental Protection Agency or by a State under an approved program, as authorized by Section 402 of the Water Act (33 U.S.C. § 1342), or by local government to ensure compliance with pre-treatment regulations as required by Section 307 of the Water Act (33 U.S.C. § 1317).