Reverberatory furnace definition

Reverberatory furnace means a refractory-lined furnace that uses one (1) or more flames to heat the walls and roof of the furnace and lead-bearing scrap to a temperature of greater than nine hundred eighty (980) degrees Celsius so that lead compounds are chemically reduced to elemental lead metal.
Sample 1Sample 2Sample 3
Reverberatory furnace means a refractory-lined furnace that uses one or more flames to heat the walls and roof of the furnace and lead-bearing scrap to such a temperature that lead compounds are chemically reduced to elemental lead metal.
Sample 1Sample 2Sample 3
Reverberatory furnace means a refractory-lined furnace that uses one (1) or more flames to heat the walls and roof of the furnace and lead-bearing scrap to a temperature of greater than nine hundred
Sample 1

Examples of Reverberatory furnace in a sentence

  • The molten metal is held inside the furnace at the required temperature before it is tapped out for pouring or transferred to a holding furnace.Exhibit 15: Reverberatory furnace schematic33 Gas reverberatory furnaces are commonly used in large nonferrous casting foundries as they provide a large reservoir of molten metal, ensuring a steady and reliable supply of molten metal to the shop.

  • Reverberatory furnace and blast furnace are used to recover lead from e-waste fraction.

  • However, the combination of Rotary furnace and Reverberatory furnace with high calorific furnace oil as fuel reduces the quantum of slag generation and improves the recovery of lead metal considerably.

  • The Melting Facility at Capenhurst in England essentially consists of three furnaces, two of which are electric induction furnaces and one oil fired Reverberatory furnace.

  • Figure 10Lead Battery Recycling Figure 11Schematic Diagram of Lead and Lead alloys manufacturing The Reverberatory furnace is filled with the charcoals and ignited by using the blower.

  • Whilst this research does cover and outline the role, theories and deportment of leaders, it is firmly working in the field of leadership not leaders, and covers not necessarily the activities of a named leader at the top of an organisation, but concentrates on the development of devolved leadership distributed amongst the wide variety of a cadre of managers broadly termed as middle managers.

  • Phasing out the old technology capital Primary Smelting Reverberatory furnace and replacing it with a Double-Side Blown (DSB) furnace was complex, mentally, physically and financiallystraining.

  • Reverberatory furnace offgases are usually routed through waste heat boilers and low velocity balloon flues to recover large particles and heat, then are routed through an ESP or a combination spray chamber/ESP system for final particulate removal.Emissions from Pierce-Smith converters result primarily from charging and pouring procedures, during which the converter mouth is outside the gas collection hood.

  • Reverberatory furnace effluent for operations utilizing calcine rather than green feed contains minimal SO2 and is usually not vented to on-site sulfuric acid plants.

  • Kulti shall provide Crane facilities, Sand mixers, Sand drier, Crucible furnaces, Mould / Core drying ovens, Mould Boxes and other Tackles including Patterns, Welding machine, Reverberatory furnace, Hydraulic testing equipment, weighing machines etc.

Related to Reverberatory furnace

  • Infrastructure improvement means permanent infrastructure that is essential for the public health and safety or that:

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • Infrastructure Improvements means a street, road, sidewalk, parking facility, pedestrian mall, alley, bridge, sewer, sewage treatment plant, property designed to reduce, eliminate, or prevent the spread of identified soil or groundwater contamination, drainage system, waterway, waterline, water storage facility, rail line, utility line or pipeline, transit-oriented development, transit-oriented property, or other similar or related structure or improvement, together with necessary easements for the structure or improvement, owned or used by a public agency or functionally connected to similar or supporting property owned or used by a public agency, or designed and dedicated to use by, for the benefit of, or for the protection of the health, welfare, or safety of the public generally, whether or not used by a single business entity, provided that any road, street, or bridge shall be continuously open to public access and that other property shall be located in public easements or rights-of-way and sized to accommodate reasonably foreseeable development of eligible property in adjoining areas. Infrastructure improvements also include 1 or more of the following whether publicly or privately owned or operated or located on public or private property:

  • Single Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in a single homogeneous phase and which does not require that the product container be shaken before use.

  • Development Site means any parcel or lot on which exists or which is intended for building development other than the following:

  • TDP means “TDP” as that term is defined in the Second Amended Joint Plan or as that term is defined in any Plan confirmed by the Bankruptcy Court.

  • Temporary clean coal technology demonstration project means a clean coal technology demonstration project that is operated for a period of five years or less and that complies with the SIP and other requirements necessary to attain and maintain the national ambient air quality standards during the project and after the project is terminated.

  • Double Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in two or more distinct phases that requires the product container be shaken before use to mix the phases, producing an emulsion.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Remanufacturing means the activity of overhauling, retrofitting, fabricating, or repairing a product or its component parts for ultimate sale at retail.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Compression ignition engine means an internal combustion engine with operating characteristics significantly similar to the theoretical diesel combustion cycle. The regulation of power by controlling fuel supply in lieu of a throttle is indicative of a compression ignition engine.

  • Airport Ground Support Equipment means vehicles and equipment used at an airport to service aircraft between flights.

  • The Works/Project means the works to be executed or done under this contract.

  • maximum content of non-originating materials means the maximum content of non-originating materials which is permitted in order to consider a manufacture to be working or processing sufficient to confer originating status on the product. It may be expressed as a percentage of the ex-works price of the product or as a percentage of the net weight of these materials used falling under a specified group of chapters, chapter, heading or subheading;

  • Furniture maintenance product means a wax, polish, conditioner or any other product designed for the purpose of polishing, protecting or enhancing finished wood surfaces other than floors but does not include dusting aids, wood cleaners, products designed solely for the purpose of cleaning and products designed to leave a permanent finish such as stains, sanding sealers and lacquers.

  • Custom Local Area Signaling Service Features (CLASS) means certain call-management service features that are currently available from SBC-13STATE’s local networks. These could include: Automatic Call Back; Automatic Recall; Call Trace; Caller Identification and related blocking features; Calling Number Delivery; Customer Originated Trace; Distinctive Ringing/Call Waiting; Selective Call Forward; and Selective Call Rejection.

  • Fugitive dust emissions means particulate matter from process operations that does not pass through a process stack or vent and that is generated within plant property boundaries from activities such as: unloading and loading areas, process areas, stockpiles, stock pile working, plant parking lots, and plant roads (including access roads and haul roads).

  • Combustion turbine means an enclosed fossil or other fuel-fired device that is comprised of a compressor, a combustor, and a turbine, and in which the flue gas resulting from the combustion of fuel in the combustor passes through the turbine, rotating the turbine.

  • Manufacturing Facility means buildings and structures, including machinery and equipment, the primary purpose of which is or will be the manufacture of tangible goods or materials or the processing of such goods or materials by physical or chemical change.

  • Biomethane means biogas that meets pipeline quality natural gas standards.

  • Bioassay means the determination of kinds, quantities or concentrations and, in some cases, the locations of radioactive material in the human body, whether by direct measurement, in vivo counting, or by analysis and evaluation of materials excreted or removed from the human body. For purposes of these rules, “radiobioassay” is an equivalent term.

  • Construction materials means any tangible personal property that will be

  • Clone means a non-flowering plant cut from a mother plant that is capable of developing into a new plant and has shown no signs of flowering.

  • Manufacturing Facilities means facilities engaged in the mechanical or chemical transformation of materials or substances into new products and shall include:

  • Beam scattering foil means a thin piece of material (usually metallic) placed in the beam to scatter a beam of electrons in order to provide a more uniform electron distribution in the useful beam.