Fugitive dust emissions definition

Fugitive dust emissions means particulate matter from process operations that does not pass through a process stack or vent and that is generated within plant property boundaries from activities such as: unloading and loading areas, process areas, stockpiles, stock pile working, plant parking lots, and plant roads (including access roads and haul roads).
Sample 1Sample 2Sample 3
Fugitive dust emissions means emissions of particulate matter into the outdoor atmosphere that is not vented or captured by a stack or chimney.
Sample 1Sample 2Sample 3
Fugitive dust emissions means airborne particulate matter from roads, parking lots, plant yards, or other exposed surfaces, construction activities, mining, blasting, truck transport, land reclamation, and the like.
Sample 1Sample 2Sample 3

Examples of Fugitive dust emissions in a sentence

  • The Fugitive dust emissions from all sources shall be regularly controlled by installation of required equipments/ machineries and preventive maintenance.

  • Fugitive dust emissions are generally regulated as a nuisance, although PM10 and PM2.5 are specifically addressed through the state planning process as criteria air pollutants.

  • Fugitive dust emissions (airborne dust generated by vehicles operating on unpaved surfaces, transfer or transport of dust producing materials, etc.) shall be controlled at the construction site, along haul routes and at staging areas.

  • In relation to the construction phase, the construction phase will be undertaken in accordance with the Strict MMUH protocols for Fugitive dust emissions.

  • Fugitive dust emissions vary greatly during construction and are dependent on the amount and type of activity, silt content of the soil, and the weather.

  • Fugitive dust emissions from mining activities may be regulated through these permit programs (usually by requiring dust suppression management activities).

  • Fugitive dust emissions from mobile equipment will be controlled during active mining with use of water truck.

  • Fugitive dust emissions are controlled by application of water and/or chemical dust suppressants.

  • Thus, there may be more than one stack emission point at a given sinter plant.• Fugitive dust emissions may arise during handling and transportation of the raw materials and of the cooled sinter as well as during maintenance and accidental interrupts of the cyclones or filters.

  • Fugitive dust emissions are controlled by the implementation of the Fugitive Dust Control Plan (FDCP).


More Definitions of Fugitive dust emissions

Fugitive dust emissions means, for the purposes of calculating emissions for the ROP emission limit, particulate matter emissions that do not exit from a flue or stack. Outdoor storage piles or dust from roadways on the facility’s property are common sources of fugitive dust.
Sample 1Sample 2Sample 3
Fugitive dust emissions means emissions of particulate matter into the outdoor atmosphere that is
Sample 1Sample 2Sample 3
Fugitive dust emissions means particulate matter fromprocessoperations that does not pass through a process stack or vent and that is generated within plant property boundaries fromactivities such as: unloading and loading areas, processareas,
Sample 1
Fugitive dust emissions means particulate matter from process operations that does not pass through a process stack or vent and that is generated within plant property boundaries from activities such as: unloading and loading
Sample 1
Fugitive dust emissions means particulate matter that does not pass through a process stack or vent and that is generated within plant property boundaries from activities such
Sample 1

Related to Fugitive dust emissions

  • Fugitive emissions means those emissions which could not reasonably pass through a stack, chimney, vent, or other functionally equivalent opening.

  • Fugitive dust means solid airborne particulate matter emitted from any source other than a flue or stack.

  • Fugitive emission means an emission to air from the permitted installation that is not controlled by an emission limit imposed by a condition of this Permit.

  • Evaporative emissions means in the context of this UN GTR the hydrocarbon vapours lost from the fuel system of a motor vehicle during parking and immediately before refuelling of a sealed fuel tank.

  • PM10 emissions means PM10 emitted to the ambient air as measured by an applicable reference method, or an equivalent or alternate method, specified in 40 CFR Part 51, Appendix M as of December 8, 1984, or by a test method specified in these regulations or any supplement thereto.

  • Predictive emissions monitoring system or "PEMS" means all of the equipment necessary to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and calculate and record the mass emissions rate (for example, pounds per hour) on a continuous basis.

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR Part 82 subpart G with supplemental tables of alternatives available at (http://www.epa.gov/snap/).

  • Fugitive from justice means any person who has fled from any state, territory, the

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Aerosol cooking spray means any aerosol product designed either to reduce sticking on cooking and baking surfaces or to be applied on food, or both.

  • Interconnection Activation Date means the date that the construction of the joint facility Interconnection arrangement has been completed, trunk groups have been established, joint trunk testing is completed and trunks have been mutually accepted by the Parties.

  • Temporary clean coal technology demonstration project means a clean coal technology demonstration project that is operated for a period of five years or less and that complies with the SIP and other requirements necessary to attain and maintain the national ambient air quality standards during the project and after the project is terminated.

  • Exhaust emissions means the emission of gaseous, solid and liquid compounds from the tailpipe.

  • Gasoline dispensing facility means any site where gasoline is dispensed to motor vehicle gasoline tanks from stationary storage tanks.

  • Biomethane means biogas that meets pipeline quality natural gas standards.

  • Respiratory protective equipment means an apparatus, such as a respirator, used to reduce an individual's intake of airborne radioactive materials.

  • Radiation detector means a device which in the presence of radiation provides a signal or other indication suitable for use in measuring one or more quantities of incident radiation.

  • Reactivation means the process whereby an inactive licensee obtains a current license.

  • Synchronous Optical Network (SONET) is an optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC-1/STS-1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • greenhouse gas emissions means emissions in terms of tonnes of CO2 equivalent of carbon dioxide (CO2), methane (CH4), nitrous oxide (N2O), hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), nitrogen trifluoride (NF3) and sulphur hexafluoride (SF6) determined pursuant to Regulation (EU) No 525/2013 and falling within the scope of this Regulation;

  • Assistive Devices means any category of durable medical equipment, mechanical apparatus, electrical appliance, or instrument of technology used to assist and enhance an individual's independence in performing any activity of daily living. Assistive devices include the use of service animals, general household items, or furniture to assist the individual.

  • Air-purifying respirator means a respirator with an air-purifying filter, cartridge, or canister that removes specific air contaminants by passing ambient air through the air-purifying element.

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Secondary emissions means emissions which occur as a result of the construction or operation of a major stationary source or major modification, but do not come from the major stationary source or major modification itself. For the purposes of this chapter, “secondary emissions” must be specific, well-defined, and quantifiable, and must impact the same general areas as the stationary source modification which causes the secondary emissions. “Secondary emissions” includes emissions from any offsite support facility which would not be constructed or increase its emissions except as a result of the construction or operation of the major stationary source or major modification. “Secondary emissions” does not include any emissions which come directly from a mobile source, such as emissions from the tailpipe of a motor vehicle, from a train, or from a vessel.